CNC machining center

HOMAG BAZ 41/30K

Condition: ready for operation (used), Year of construction: 2002, number of axes: 4, This HOMAG Optimat BAZ41/30/K Event was manufactured in 2002. A used CNC processing center with a working area of 3000 x 1050 mm. Consider the opportunity to buy this HOMAG Optimat BAZ41/30/K Event CNC processing center. Contact us for more information. Isdpox D Dvnofx Acrjth • Working area: 3000 x 1050 mm

Condition: good (used), Year of construction: 2007, functionality: fully functional, NC-controlled drilling and dowel-inserting machine Manufacturer: Weeke Model: Optimat ABD 150 Year of manufacture: 2007 Workpiece dimensions: Length: 20 - 1250 mm Width: 100 - 800 mm Thickness: 10 - 60 mm Active center stop: maximum length 600 mm Equipment: - Horizontal drilling unit with 3 individually selectable spindles, spindle pitch 32 mm - 1 dowel insertion unit (spaced 32 mm from the first drilling spindle) - Glue nozzle with adjustable glue output - Glue flow monitoring Itjdpfxsxdl Ras Acroh - Mist oiler for glue nozzle - Standard dowel sizes: 8x30 mm / 8x35 mm - Vibratory feeder for automatic dowel feed 1. BASE MACHINE - Rigid welded steel frame construction - Axis travel in X, Y, and Z directions - Ball screw drives (Y- and Z-axis) and rack and pinion drive (X-axis) - Digital AC servo motor - Support table with left and right side stops and rear fence - Pneumatic center stop, manually actuated via selector switch - 6 overhead pneumatic clamps, manually adjustable - Centralized lubrication system power control PC85T Modern control system based on Windows PC

Condition: good (used), Year of construction: 2008, functionality: fully functional, operating hours: 1,400 h, power: 11.5 kW (15.64 HP), workpiece height (max.): 50 mm, edge thickness (max.): 8 mm, total length: 5,860 mm, Single-sided edge banding machine, right-handed version For hot-melt adhesive bonding. Quick-change adhesive unit for hot-melt glue. Can process PU adhesive granulate in compliance with adhesive processing regulations. Glue reservoir positioned leak-proof below the glue roller. Precisely metered glue application to the workpiece via glue roller; no adjustment required for varying workpiece thickness. Selectable glue roller rotation: co-rotating or counter-rotating direction. Glue temperature monitored via electronic thermostat. Automatic glue temperature reduction during work breaks. Infrared hot-melt adhesive activation. Automatic edge magazine for rolls and fixed lengths, including roll holder, Ø 800 mm. Equipped with reinforced pre-cutting shears for thick PVC/ABS, max. 3 x 45 mm. Centrally adjustable top pressure. Control panel at machine infeed. Electronic control system: power control PC 20+ Isdpoyud S Eofx Acroth BRANDT control system with color graphics user interface for easy and convenient operation and programming. Technical details: - Tiltable operator panel at machine infeed - Durable short-stroke membrane keyboard - Color graphic flat screen - Industrial PC with Compact Flash disk as mass storage - Aggregated function keys with LED status indicators - Color pictograms to assist user navigation - Online language switching between various foreign languages - Display of essential machine target and actual states - Status messages in plain text - Easy selection and correction of position points - Simple axis adjustment (with suitable unit configuration) - Online help in plain text via accessible help menu - Production data acquisition for production time, edge length, and workpiece count—daily and total values - Inspection and maintenance interval display - Remote service capability via integrated modem and installed service software - Save processing programs - Production according to processing programs - Data backup of processing programs

Condition: used, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, cutting height (max.): 400 mm, saw band length: 5,550 mm, saw band width: 80 mm, table length: 800 mm, table width: 1,060 mm, working height: 400 mm, - Italian manufacture - Lamella band saw - Unpainted - Very good condition - Used saw Band Saw: - Wheel diameter: 800 mm - Max. blade width: 80 mm - Max. cutting height: 400 mm - Main drive motor: 11 kW - Feed speed range: 2–40 m/min - Feed system with pneumatic pressure to the guide - Metal slip-in feed roller - Blade length: 5550 mm - Throat (blade-to-frame distance): 780 mm - Screw-type blade tensioning - Table size: 1060x800 mm - Tilting worktable: up to 15° - Extraction port diameter: 120 mm - Blade lubrication system - Foot brake - Cast wheels - Star/Delta starting - Power supply: 380V - Dimensions (LxWxH): 1600x1100x2400 mm - Weight: 860 kg Feed Unit: - Metal, toothed, drive roller Itedpfew H Rq Hex Acreh - Five feed speeds, selectable by belt adjustment - Roller height: 30 mm - Feed motor: 0.75 kW - Pressure system

Condition: new, Year of construction: 2024, Working width: 600 mm Working height: 150 mm Units: 4 brush units separately adjustable 1st unit, rotor group: group of 5 oscillating rotor brushes, Ø 115, each with a 3 kW motor 2nd unit, rotor group: group of 5 oscillating rotor brushes, Ø 115, each with one 3 kW motor Itedpfx Acsug Ty Horeh 3rd unit, brush: Scotch Brite Hard / diameter 220mm, Vario drive 4th unit, brush: Scotch Brite Hard / diameter 220mm, Vario drive Height adjustment: electric Height display: digital Control: touchscreen Feed speed: 4 - 12 m/min Motor power feed: 0.37 kW Machine length: Machine width: Weight:

Condition: used, Year of construction: 2002, Machining dimensions (tool diameter 25mm): X=3015 mm Y=1483 mm Z=325 mm Max. travels: X=3268 mm Y=1483 mm Z=325 mm Max. programming speed: X/Y = 75 m/min / Z = 30m/min Tool holder HSK 63F Drilling unit 7964, 14 vertical drilling spindles with 32 mm grid (10 in x / 4 in y) Sawing unit 7946 3.6 kW, 90° pneumatically pivotable Milling unit 7933 9 kW Wood Her Vector axis (C-axis) Tool magazine (6 disk places) Hand control unit Laser device (positioning of the suction cups) PC control panel with 17" monitor Operating system Windows 2000 Software: TwinCAM32 - office version Vacuum pump 100 m³/h Dry running Selective safety mats (3-field division) Ijdpevvi Nbsfx Acrjth Storage location: Nattheim

Condition: excellent (used), Pressure beam saw PANHANS ECOPAN -used- PC control with optimization, scoring unit, automatic cut length detection, side pressure device, air cushion tables, movable tables, infinitely variable feed rate of the saw carriage, label printer ----- Technical Data ----- Cutting length: 4,200 mm, Cutting width: 4,200 mm, Max. cutting height: 72 mm, Number of clamps: 6 pcs, Feed rate saw unit max.: 100 m/min, Feed rate for width stop max.: 80 m/min, Main saw motor power: 11 kW, Scoring saw motor power: 1.5 kW, Main saw blade Ø: 300 x 30 mm, Scoring saw blade Ø: 180 x 30 mm, Extraction port Ø bottom: 140 mm, Itodpfeyrqrtjx Acroh Extraction port Ø on pressure beam: 3x100 mm, Airflow volume: 5,000 m³/h, Compressed air connection: 6 bar, Air consumption: 140 l/min, Nominal current: 38 A, Max. circuit breaker: 50 A Quality information: - complete basic inspection - complete basic cleaning - Electrics checked - immediately ready for operation

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, cutting width (max.): 3,100 mm, saw blade diameter: 300 mm, section length (max.): 3,100 mm, Equipment: CE marking, scorer, HOLZ-HER Pressure Beam Saw LINEA 6015 Cutting length 3100 mm x cutting width 3100 mm Saw blade projection 68 mm Grooves up to 25 mm (bi-directional) 7.5 kW main saw motor 2.2 kW scoring saw motor 3 air-cushion tables 1800 mm with feed rollers Cut-out & recess device (for window cut-outs and insertion grooves) Side pressure, program-controlled Eco mode Handheld control device Label printer and software Easy-Plan optimization (upgrade and office version available) and much more... 12-month warranty Delivery, installation, and operator training of the machine can be arranged directly through us for an additional charge. The machine is currently located at our distribution warehouse in Gratwein / Austria. In the event of discrepancies between the German version and a foreign-language version, only the German version is legally binding. Our General Terms and Conditions can be found on our website at holzher.de/en/terms-and-conditions. Itedoyngt Sspfx Acroh

Condition: used, machine/vehicle number: 006279, X axis working area: 3100 mm Y axis working area: 1250 mm Working Table: Flat table Ijdpskw H Ekefx Acroth Number of controlled axes: 3 axes Total number of drilling spindles: 11 Total number of tool changer positions: 8

Condition: not inspected (used), Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm 1 used Weinig Unicontrol 6 window system ----- Manufacturer's description: For the production of individual parts, elements, and small series. Spindle arrangement: One cross-cutting saw, one single-sided tenoning and slotting spindle, one right-hand profiling spindle, one tenoning and slotting spindle, and profiling spindle suitable for holding multiple tools stacked on top of each other, with pneumatic spindle movement. Slotting table with motorized table movement and automatic transfer to the continuous, chainless rubber roller feed of the profiling unit. Feed height adjustment manually. Workpiece clamping via 2 pneumatic clamping cylinders. Length stop with scale and magnifying glass for frame or sash external dimensions. Tool positions (longitudinal and transverse machining) controlled via selector switch on the control panel. Technical Specifications ----- Crosscut Saw ----- Number of Tools: 1 Spindle Speed: 2,800 rpm Spindle Diameter: 40 mm Max. Tool Diameter: 350 mm Motor: 3 kW Mortise and Slot Spindle ----- Number of Tools: 3/4 pcs. for wood thicknesses IV 68 - IV 92 Spindle Speed: 3,500 rpm Spindle Diameter: 50 mm Tool Clamping Length: 320 mm Max. Tool Diameter: 320 mm Motor: 11 kW Profile Spindle ----- Itedpfx Acjx Tu N Horjh Number of Tools: 3/4 pcs. for wood thicknesses IV 68 - IV 92 Spindle Speed: 6,000 rpm Spindle Diameter: 50 mm Tool clamping length 320 mm Max. tool diameter 232 mm Motor 11 kW Special equipment: Synchronous spindle ----- Pneumatically timed forward/backward for tear-free rerouting of window sashes, frames, and doors. Spindle diameter 50 mm, 4 kW Tool clamping length 120 mm, zero tool diameter 112-140 mm Max. tool diameter 232 mm, spindle speed 6000 rpm Motor boost for synchronous spindle from 4 kW to 7.5 kW Screen control for 99 window types. One type can contain up to 8 different parts, each with 2 end profiles and 2 longitudinal profiles. Production options: single parts, double parts, frame-by-frame, series, rerouting. Data entry via keyboard with integrated operator guidance and error diagnostics. 1 Grooving spindle from above ----- Motor power: 2.2 kW Speed: 6000 rpm Spindle diameter: 40 mm, with 10 x 4 mm key Clamping length: 13 mm Clamping length: 40 mm Axial stroke, 2 positions Radial stroke, 2 positions Max. tool diameter: 130 mm Grooving spindle motor boost from 2.2 to 3 kW 1 Fitting milling unit, right: ----- For milling fitting grooves in the circumferential milling pass or for grooving in the longitudinal profile. Pneumatic horizontal movement with selector switch on the control panel. Motor power: 2.2 kW Speed: 6000 rpm Spindle diameter: 40 mm Clamping height: 125 mm Tool cutting radius: min. 140 mm, max. 180 mm Home position below table level: 10 mm Special design of the fittings milling machine: Clamping length 150 mm Axial stroke 80 mm, 3 positions 3 tools Radial cycle, 2 positions Motor booster for the hinge milling spindle from 2.2 to 3 kW Hinge milling spindle for 230 mm tool diameters in and above the table Electric height adjustment of the feed with selector switch on the co...