Wide belt sander

Houfek Tornado Cindy 400C

Condition: new, Technical data: Working width: 970 mm Grinding width: 950 mm Working height: 3 - 160 mm 1 steel aggregate 2 combination unit with shoe The shoe is pneumatically pressed Sanding belt dimensions: 970 x 2150 mm Common motor power of 2 grinding aggregates: 11 kW The speed of the feeding belt on the converter: 16-18 m / sec. Table height adjustment motor power: 0.25 kW Feed belt motor power: 0.55 kW Sanding roll diameter: 150 mm Sanding pad width: 50 mm Sanding belt speed: 18 m / s 1 unit Compressed air consumption: 20l / min Lrsdeg A D Anjpfx Adwsg Standard equipment: Mechanical oscillation of the sanding belt without the use of compressed air. ECO GEAR SYSTEM Smooth regulation of the feeding belt on the converter 4-20m / min Automatic star / delta start Steel roller on the first aggregate, rubberized on KOMBI agragata Electronic table height display Automatic reading device for gr. material and table position setting Safety switches Automatic machine switches Main engine brake Rubber pressure rollers 2-roller table at the entrance and exit In stock! Machine dimensions: Length: 1630 mm Width: 1656 mm Height: 2025 mm

Condition: used, Year of construction: 1995, 1995 Friulmac FN7 1300 Cutting-off machine for Parquet heads or similar products. Maximum opening 1,400 mm Lrsdpjuichrefx Adweg Maximum step width 220 mm

Condition: good (used), Year of construction: 2000, Schroeder Mosaic Press 160mm. Gluing patterns - brick / English pattern plate 640x274mm and halves 640x137mm glued in 6 variants: - single brick offset 50% - double brick offset 50 % - triple brick offset 50 % - single brick offset 25 % - double brick offset 25 % Lrodpfx Adjr Iyvbowog - triple brick offset 25 %

Condition: used, Year of construction: 2001, - Manufacturer Barberan - Type BRB-1400 - year of construction 2001 - Working width 1330 mm - Working height ~ 880 - 900 mm - Part height ~ 5 - 100 mm - Operating side right - Lacquer application roller ~45 Shore - Roller diameter 245 mm Lrodpfx Aouyky Todwsg - Application cylinder speed 4 - 24 m/min - Quick-change system Application roller - Hard chrome-plated metering roller 174 mm - Dosing roller Speed 4 - 24 m/min - Reverse drive - Solvent-resistant conveyor belt - Double diaphragm pump - Travelling on flanged rollers without - Feed adjustable via frequency converter 5 - 25 m/min - Length: 980mm - Width: 2.800mm - Weight 1,680 kg - Volt, Hz 400 / 50 - Location, in stock - Machine has been overhauled in 2022

Condition: used, machine/vehicle number: 3281, - Producer Elmag Superfici - Working width 1300 mm - Number of lamp from top 2 Stk. - Lamp straight to conveyor 2 Stk. - For mercury lamps Lredpfx Adsumvmkewog - For gallium lamps - Electic capacity lamp 80 W/cm - Selective shiftable 80 / 40 W/cm - Feed speed infinitely adjustable by hand wheel ~ 2 - 7,5 m/min - Location - Voltage / HZ 400 / 50 - Commodity code 8419 3200

Condition: new, weight max. in kg 2000 kg fork length 1800 mm stroke height min 85, max 200 mm 155 mm length in width 540 mm number of wheels 4 vorne, 2hinten tire equipment PU/PU fork arm (length x width x thickness) 1800 x 155 x 50 mm weight of the machine ca. 0,088 t dimensions 2,15 x 0,54 x 1,20 m SPECIAL PRICE !!! - metered lowering of heavy loads - low maintenance hydraulic unit in steel version - Rounded fork tips for more safety when entering the pallet Ljdpfsfgyhpex Adwjrg - Hard chromed piston rod and overload valve - Steering and load rollers ball bearings, for easy running even under load

Condition: used, Year of construction: 1995, Used machine Year of manufacture: 1995 Equipment and technical data: Lodpfxjwka Hlo Adwerg efficient: - Turbo system: 25% higher system performance thanks to state-of-the-art application technology, all with the same space requirements! - Reduced throughput times due to optimized program automation for fast UV systems - Up to 70% cost savings compared to casting and spraying, thanks to the use of solvent-free systems and single-operator control flexible: - Cost-effective single-operator operation with return function or, alternatively, continuous operation for two-person operation - Expandable: The system can be upgraded with additional roller, smoothing, or sanding units ergonomic: - Simple operation thanks to ergonomic controls service-friendly: - Cleaning cycle and quick-change system process-safe: - Top-quality surfaces, precisely reproducible Included: - Roller conveyor, 2000 mm long - ELX 1400 roller conveyor - Bar conveyor, 3000 mm long - UV drying tunnel, 1 lamp 60/80/120 W Working height: 850 - 950 mm Application roller, rubberized: D=238 mm Dosing roller, chrome-plated: D=174 mm Passage height: 3–120 mm UV lamp module: 80/120 W mercury Connected load: approx. 21 kW Dimensions: 1300 x 3080 mm Availability: short notice Location: Röllbach

Year of construction: 2004, condition: refurbished (used), 2004 Double squaring machine, Friulmac brand, Idramat model Lsdpepfp Ezofx Adwjrg Note: see [VIDEO](?share=copy#t=0)

Condition: used, Year of construction: 1995, machine/vehicle number: 513053, Proficoater Hymmen PFC-S 1400 Painting system for the application of UV-curing paint systems consisting of 3 positions:Item 1 Roller transport TRR 1400: Conveyor length: 2,000 mm Nominal width: 1,400 mm Usable width: 1,300 mm Working height: 900 +/- 50 mm Feed: 6 - 30 m/min FU - control Carrying rollers: D = 80 mm, plastic coated Carrying roller pitch: 150 mmItem 2 Lredpfx Aeumvi Sodwsg Roller coating machine Hymmen ELX-S / PFC - Manufacturer Hymmen - Type ELX - S / PFC - Year of manufacture 1995 - Working width 1300 mm - Working height 900 mm + - 30 mm - Part height max. 100 mm - Paint application roller 50 Shore - Roller diameter ~ 238 mm - Application cylinder speed 6 - 45 m/min - Dosing roller hard chrome-plated ~ 174 mm - Dosing roller speed 2 - 12 m/min - Roller transport - Length ~ 700 mm - Feed ~ 6 - 35 m/min - Total connection approx. 2 kW - With control cabinet - Volt, Hz 400 / 50 - Location, in stock - Voltage fluctuations max. +/- 5 % UV channel Hymmen (Supferfici) 1 R - Manufacturer Hymmen / Superfici - Type TU 166 - Year of manufacture 1995 - Number of tubes from above 1 piece - Tubes positioned straight - Tube power 80 W/cm - Bar transport 3,000 mm (+1,000) mm - Bar pitch 80 mm - Exhaust air line, fan 250 mm - Adjustable feed rate ~ 6 - 30 m/min - Loading meter on truck 3.8 m - Location, in the warehouse - Volt, Hz 400 / 50 - Voltage fluctuations max. +/- 5% General data:Coating: from above Operating side: leftYear of manufacture 1995 Working height: 900 +/- 50 mm, Effective usable width: 1,300 mm, Passage height: max. 100 mm, Transport feed rate: 6 - 30 m/min, frequency converter control, Mains voltage: 400 V, 50 Hz, Protection class: IP 54, Connection value: approx. 16 kW, Fuse: 63 A provided by customer, Total length: approx. 5,660 mm, Total width: approx. 2,700 mm,Panel type: wood-based panels,Panel length: min. 300 mm,Panel weight: max. 80 kg/m²,Paint: UV paints solvent-free 60 140 DIN 4sec,Application quantity 3 - 40 g /m² (optionally higher with a different roller) EX area: The ELX-S application machine is designed for cleaning with solvents of temperature class T3. When setting up and operating it, it must be ensured that no ignitable mixture within the meaning of the explosion protection directive occurs outside a distance of 500 mm around the paint-carrying parts of the machine.

Year of construction: 2016, condition: excellent (used), Thickness planer Manufacturer: SCM Lrsdspr U D Sopfx Adwog Type: S52 Elite S Year of construction: 2016 Working width: 520 mm Max. Plane thickness: 240 mm Power: 7 kW Feed rate: 5 / 8 /12 /18 m/min Number of knives: 4 Blade type: Tersa Motor brake: Yes Suction nozzle: 120 mm