2 vessel brewhouse

Huppmann

Year of construction: 2004, condition: used, Insulated stainless steel lauter tun with a masher, a drop floor, and a spent grain discharge screw. Dodszi Ar Espfx Adrswa Additional title: stainless steel brewing vessel with spent grain discharge Capacity: 15000 l

Condition: new, Year of construction: 2023, Tank & Environmental Protection Wozniack – Certified Specialist Company according to the Water Management Act Dear Sir or Madam, We offer a 50,000-liter double-walled storage tank for the storage of heating oil / diesel / HVO100. Color: RAL 7035 Material: Steel, grade S235JRG2 Documents: Manufacturer’s certificate / type plate according to EN 12285-2, Ü marking Tank suitable for above-ground installation outside earthquake / flood zones. Equipment/fittings: Manway 600 mm with manway cover, screws, and gasket 1.1 Equipment/fittings: Manway 500 mm with manway cover and gasket 1 Dwsdpfx Adjh Ukupsrea -Filling pipe 2” with TW closure (filling cap) (from 20 m³ = 3”) -Suction pipe 1 ¼” -Dipstick and dipstick closure - Tank content indicator -Vent pipe with cap 1 ½” -Limit switch with type approval -Leak detection device (optical) = LAS with leak detection fluid -Access ladder with platform for side mounting, supplied separately Sincerely, from Warstein Tank- und Umweltschutz Wozniack Enkerbruch 2 59581 Warstein

Year of construction: 2004, condition: used, Stainless steel mash tun for producing mash. The tun is heated by steam. A bottom-entry, two-blade propeller agitator keeps the mash moving and helps homogenize it. The vessel is also equipped with a pre-masher for mixing grist and water and preventing clumping. Additional title: steam-heated stainless steel brewing vessel Capacity: 15000 l Djdpjzi Aq Ijfx Adrswa Material: stainless steel Features: Heating zones; agitator; CIP ball; pre-masher; manhole with sight glass and clamping screws

Condition: used, Steam-heated 4-vessel brewhouse with stainless steel brewing vessels. The system is suitable for infusion and decoction methods as well as high-gravity brewing and comprises the following components: - Mash tun (Huppmann, 2004) with a capacity of 150 hl, steam-heated, insulated, with a bottom-entry agitator and pre-mash screen - Lauter tun (Huppmann, 2004), insulated, with a drop floor, grist cutter and spent grain discharge screw - First run-off vessel for wort (Steinecker, 2003), insulated tank - Wort kettle (Steinecker ‘Merlin’, 2003), steam-heated, insulated - Wort condenser - Whirlpool, insulated, with hop dosing vessel (manual flap) and top-entry spent grain discharge - Spent grain tank with a capacity of 15 hl, conical - Hop dosing unit with 3 stainless steel vessels and hop chutes on a shared stainless steel frame - Wort cooler (API, 2006), two-stage plate heat exchanger for cooling 180 hl/h of hot wort to fermentation temperature - 3 centrifugal pumps for wort transfer - Various pipework, valves, fittings and sensors Additional title: Brewing system with steam-heated stainless steel vessels; built between 2003 and Cast wort capacity up to: 18000 l ; 15,500–16,000 litres for full beer, 12,000 for bock beer Malt bill: 2500 kg/batch Djdpfx Aszizb Sodrewa Operation / Control: Simatic S7-400 Material: Stainless steel Features: Mash tun; lauter tun; wort transfer tank; hop dosing; wort kettle (Merlin); whirlpool; spent grain tank; wort cooling; 3 x wort pumps

Condition: new, Year of construction: 2024, Working width: 600 mm Working height: 5 mm to 300 mm Minimum workpiece length: 250 mm Units: 2 1. Saw cutting unit Random System: Saw cut appearance 2. Brush: Tynex, diameter 210 mm Height adjustment: electric Height display: digital Feed speed: 4 - 14 m/min Motor power saw unit: 1.1 kW Motor power brush: 4 kW Motor power feed: 0.37 kW Machine length: 1400 mm Machine width: 1500 mm Dedpfoupy Spjx Adrowa Machine height: 1600 mm Weight: 700 kg

Year of construction: 2008, condition: used, 5-vessel-brewhouse with additional whirlpool with a knockout capacity of 250 hl at 12° Plato. The brewhouse consists of a mash kettle, a mash decoction kettle, a lauter tun, a prerun vessel and a wort kettle with internal boiler. Furthermore, a classic whirlpool with wort cooling and wort aeration is installed. The brehouse is fully automated with the electronic process control "brewmaxx V7" and on basis of the operation system Windows. The brewhouse is completely made in stainless steel, but installed beneath the old copper hoods. The prerun vessel is "Outdoor"-installation, the whirlpool is - like the other brewing vessels - installed in the brewhosue room beneath a copper hood. Additional title: Modern brewhouse made of stainless steel, copper-clad Djdpfx Ajw T St Uedrowa Cast wort capacity: 250 hl Operation / Control: Fully automatic with "brewmaxx V7" process control system Material: Stainless steel brewhouse with copper cladding Features: Mash tun kettle, mash kettle, kettle vapor condenser, lauter tun, spent grains bunker with spent grains conveyor, feed vessel, wort kettle with internal boiler, hop dispenser, spindle station, whirlpool, wort cooling, wort aeration, Various pumps, measurement and control technology, valves, control cabinets

Condition: used, Year of construction: 2016, Overview  The complete filling line for big size PET bottles is located at a mineral water plant and was used for filling water. The line has been regularly serviced and is in very good condition. Output: 3,000 bph List of machines Blow moulder| Kosme| KSB4RG 2016 | 3600 bph Air Transporters| NTS | 2016      Rinser - Filler - Capper| GyM | MONOBLOC 12/3 PVG| 1995|3000bph Caps Feeding Tolva| GyM | 1995      Handles feeder |TAS| VA-1150/75C | 2009 | 3000bph Handle applicator| And&OR | 50SIA5000R8P2-TL | 2009| 3000bph Labeller| Auxiemba | Gacela R-16/8-HM-12 | 2010 | 4100bph Lot Coder| MACSA | K-1030PLUS| 2008      bottle spinner / rotator| GyM | 2001     Divider | SMI |  DIVIPACK 2000  |2002    Shrink Packer| SMI | LSK 30F | 2002 | 7200 bph (30 packs per minute 2*2 on 2,5L / 2 on 5L) Dsdpfx Astuyq Rodrswa

Condition: used, Year of construction: 2017, Overview  This brew house was built in 2017 by Spanish manufacturer INOX DUBRA and has a wort volume of 25 hectoliters. Various equipment is included in the offer, from the brewhouse to bottling. All the equipment is still installed and be viewed and inspected in person at any time.   Scope of delivery  - Brewhouse | INOX DUBRA | 25 HL | Two-Vessel Brewhouse   - Plate Heat Exchanger | CESPEDES | UFT34/1OO- UFT32/12 | 2015  - Cold Water Tank | 2.500L   - 3x Isobaric Fermentation tanks | INOX | 2.500L | 2020  Dwsdpfxsty Ddrj Adrsa - 3x Atmospheric Fermentation tanks | INDUSTRIAS CESPEDES | 1.000l | 2014  - Brite tank | INDUSTRIAS CESPEDES | 2017   - Grinding mill  - Water tank | 1.000L   - Compressor   - Helicoidal pump   - Volumetric pump - Manual atmospheric filler - Steam generator

Condition: new, Year of construction: 2026, The ATC series of plotters has been developed for professional use in large industrial plants and factories for the production of complex large-size components. Thanks to its special design, the machine is adapted to the production of casting models and yachts, among others, significantly reducing processing times. ATC machines use an additional reinforced structure and stronger AC servo drives on each axis. The presence of five axes provides support in the machining process of even the most demanding elements. The plotters in this series come standard with automatic tool change, a six-position linear magazine and a tool height sensor. The applied solutions significantly accelerate the machining process requiring the use of several milling cutters. Processed materials: -wood - wood-based materials (chipboard, MDF, OSB, etc.) -plastics -Composites -PVC Djdpfxjiq U Tqo Adrjwa - non-ferrous metals (aluminum, brass, copper, etc.) CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 3000 x 6000 [mm] AXIS RANGE AND GATE CLEARANCE: Customised parameters DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: TOOL MAGAZINE: The standard equipment of the machine is a linear tool magazine equipped with 6 HSK cones. Additional tool magazine positions can be provided. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time.

Year of construction: 1999, condition: used, 3-device compact brewhouse for 20 hl output Additional title: 20 hl compact brewing system Brew size: 2000 l Dsdpsw U A T Iefx Adrewa Length: 2600 mm Width: 5000 mm Height: 4500 mm Operation / Control: Manual control with heating programme controller ‘Barbie and Kühner 7600’ l Material: stainless steel / copper Base construction: Brewing vessels mounted on frame construction Features: Mash/wort kettle, lauter tun, pre-run vessel/whirlpool, spindle station, stainless steel control cabinet with control, stainless steel frame with operating platform, stairs, piping, pumps and fittings