Electrode welding machine

JÄCKLE G 400 S

Condition: excellent (used), Gold anodized panels Working dimensions 2.5 x 1.1 m Electric heating Fully functional, tested You can call or write to us. We speak and write German and Russian. Hfodpfx Aju I N D Hjgwed You can also send messages in English. 31.3.5

Year of construction: 1994, condition: good (used), Rivo gang wheel sharpening machine Hjdpspl D Hxofx Agwjfd Tyop GA 250

Condition: used, Year of construction: 2018, Used machine Year of manufacture: 2018 Special feature: Machine for up to 100 mm edge height! Condition: Factory-inspected by Lange Maschinenbau Hodpfxowka S Ij Agwofd Equipment and technical data: - Machine table with 13 running rollers for improved workpiece guidance - Edge feeding, synchronous with belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1250 mm long - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber top - Digital counter for height adjustment - Direct glue application to the workpiece: drip-proof glue pot with glue supply from below and rapid heat-up time after standstill - Flush cutting unit: - for front and rear workpiece edges - automatic sensing at the workpiece - pneumatic cutting with knife for cuttable edges - Flush trimming unit - with vertical sensing and horizontal guidance - reproducible setting using digital counters - 2 powerful 0.4 kW high-frequency motors - stepless speed adjustment from 4000 to 18000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction nozzle Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper cutter with belt feed - Continuous workpiece support approx. 1800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable foil dispenser Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating capacity: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected load: 3.8 kW - Pneumatic connection: 6 Bar Dimensions (without foil dispenser): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Condition: used, No. 3176 Automatic planer and moulder WEINIG Hydromat 1000 Used, year of construction 2007 6 spindles: bottom-right-left-top-top-bottom Electronic feed 6 - 60 m/min Working width 80 - 150 mm Working height 23 - 65 mm Finished slat widths 4 - 15 mm Max. Max. number of slats 16 pieces Slat lengths 400 - 4000 mm 1st spindle horizontal at the bottom Brake motor 11 kW, 6000 rpm Spindle diameter 45 mm Tool flight circle 125 - 180 mm 2nd spindle vertical right Brake motor 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment travel 80 mm 3. spindle vertical left 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment travel 80 mm Pressure shoe in front of the spindle, swiveling away, pneumatic roller contact pressure 4. spindle horizontal top 15 kW, 6000 rpm, diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment path 45 mm Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic 5. horizontal top spindle as saw spindle Brake motor 37 kW, 5000 rpm Diameter 45 mm Axial adjustment travel reduced to 25 mm Tool flight circle 112 - 250 mm Max. Sawing depth 35 mm Axial adjustment path 45 mm Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic 6. horizontal spindle at the bottom as saw spindle Brake motor 30 kW, 5000 rpm Axial adjustment travel reduced to 25 mm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Sawing depth 35 mm Axial adjustment path 45 mm All moulder spindles with high-performance bearings Electronic feed 7.5 kW Adjustment travel of the feed rollers compared to the left-hand spindle, axial 35 mm Shorter roller distance compared to the right-hand spindles Running meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 driven rollers above the table 1 driven, toothed roller in the table, lateral pressure roller Automatic waxilite pump / lubricant pump Machine with 4-roller extension, pendulum shafts extended to 200 mm 2 driven, toothed rollers in the outfeed table 2 driven, toothed rollers in the machine table Hedpfx Ageu Agh Sowefd Pressure beam before and after upper spindle with mechanical digital display DigiSet (digital double display) for left and top spindles Electrical height adjustment of the upper spindles and the feed Machine already dismantled and stored Sale on behalf of customer, ex location near South Tyrol, without transportation and assembly Subject to errors in the description and price Transportation and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: ready for operation (used), machine/vehicle number: 03890317, Machine number: 03890317 // See pictures for condition and details Hfedpfx Aget A A Aqewod

Year of construction: 2004, condition: good (used), machine/vehicle number: 2004-3-11A, - Manual feed of the milling unit - Work table height adjustable via hand wheel - horizontal and vertical material tension - Cutter diameter up to 250 mm - max milling height 150 mm - max milling depth 80 mm - max milling length 305 mm - angle adjustable stop Li + Re 20 - 90 ° - milling spindle speed 4500 rpm - Drive 400 V 3.2 kW - Compressed air supply 6 - 8 bar - Air consumption per working cycle 10 l - Pneumatic profile clamping Hjdef E Higepfx Agwjfd - Table underframe - Space requirement approx. W 1100 x H 1300 x D 700 mm - Weight approx. 200 kg

Condition: used, SINGLE SHAFT SHREDDER WEIMA MODEL WLK15 Hodpfetqd Ndjx Agwjfd MAIN MOTOR 90KW ROTOR KNIVES SIZE 50X50 (NEW KNIVES) ROTOR LENGTH 1500MM ROTOR DIAMETER 370MM THE MACHINE IS 100% FUNCTIONAL READY TO WORK

Condition: excellent (used), Year of construction: 1996, OTT ALPHA 110 wide-belt sander - machine in stock - after the technical review - very good condition - German production - year of production 1996 - segment shoe - a perfect solution for varnish / veneer TECHNICAL SPECIFICATIONS: - grinding width 1100 mm - grinding height 1-150 mm - combi unit with task-controlled membrane sanding shoe - engine power 11 kW - blowing on the belt - pneumatic oscillation - two types of belt speed 4.5 and 18 m / s - aggregate with felt roller - engine power 0.75 kW - shaft oscillation - aggregate with a cleaning brush - engine power 0.75 kW - smoothly regulated feed - feed speed range 4-18 m / min - 1.5 kW feed motor power - electric height adjustment - vacum table - 3kW fan motor power - diameter of nozzles 4 x 120 mm and 1 x 150 mm Transport dimensions: - length 200 cm - width 245 cm - height 210 cm - weight 2500 kg Hfjdpsgi Dryofx Agwed 1. The Alpha Combi aggregate is a grinding unit with a contact shaft with a diameter of 150 mm and a hardness of 90 shor. It is integrated with a sectional pneumatic shoe with a section width of 27 mm 2. EMS 27 optical system - detects minimal unevenness and adjusts the pressure force of a particular section of the shoe at a given point of the ground element. 3. It is possible to control the individual sections of the shoes adjacent to each other in the range -2 to +4 -

Condition: used, Year of construction: 2007, SINGLE SHAFT SHREDDER WEIMA MODEL WLK15 MAIN MOTOR 90KW ROTOR KNIVES SIZE 50X50 (NEW KNIVES) ROTOR LENGTH 1500MM ROTOR DIAMETER 370MM Hfedpfx Agetqdxfswed THE MACHINE IS 100% FUNCTIONAL READY TO WORK

Year of construction: 1995, condition: good (used), The bender can bend aluminum and plastic, Total length: approx. 11500 mm, depth: 1600 mm. Hfsdjrif U Ejpfx Agwed