Folding machine

Jorns

Condition: used, Year of construction: 1988, machine/vehicle number: 8744-09, working width: 6,000 mm, total length: 6,800 mm, total width: 1,600 mm, total height: 2,100 mm, input voltage: 400 V, input current: 16 A, Equipment: foot remote control, We offer this used Jorns AG 82-J-HY-SM-NC-6 X 1.5 folding machine, year of manufacture 1988. Minimum sheet width: 50.0 mm Maximum sheet width: 6000 mm If you have any questions or need further information, please feel free to send us a message or give us a call. Gsdpfsypm Aiox Abhsbi

Condition: used, CNC Press Brake AMADA Type HFBO 50 x 2000 Serial No. HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8 axes - CNC control Operator II Pressing force: 50 tons Working length: 2090 mm Stroke: 200 mm Frame depth: 420 mm Distance between side frames: 1660 mm Max. tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Mains connection: 400 Volt, 50 Hz, 20 Amp. - 8-axis CNC control Operator II (Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2) - 2 freely programmable backgauge fingers, movable laterally and in height (Z1+Z2+R1+R2) Gsdpfow Iq Ugex Abhobi - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-style tool clamping for the upper tool (5 AMADA Expert, 5 UKB 50.667 H=120 mm) - Tool holder for lower tool, 60 mm wide - 11-piece upper tool set, 30°, total length 1675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) in length - 2-piece lower tool, 88° - V8, total length 1250 mm - consisting of: 1x 835 / 1x 415 mm in length - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book included Weight: 4,700 kg Good condition

Year of construction: 1993, condition: ready for operation (used), A total of 21 identical tanks are available. 1-12) 12x V2A stainless steel tanks, capacity: 10000l. 13-14) 2x V2A stainless steel tanks with removable agitator, capacity: 10000l. 15-21) 7x V2A stainless steel tanks, capacity: 11000l. All tanks have two taps and a tank lid. Documentation available. On-site inspection is possible. Godpfxed R Azlo Abhobi

Condition: used, tank capacity: 13,000 l, GENERAL Equipment: spray head, crane lugs Design: vertical Notes: manway approx. 325 x 440 mm; minor dents in the cylinder Speed: 1390 rpm Internal diameter: 2,090 mm Total height: 4,500 mm Power: 1.1 kW Gbjdpfxsyclrvj Abhsi Location: Bremen Nameplate: Volume: 13,000 litres Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 3,760 mm Last application: animal feed TANK Max. permissible operating temperature: 50 °C Support type: height-adjustable feet Number of feet: 3 pcs EQUIPMENT Manway / access port: on the cylinder Outlet: DN65 DIN 11851 MATERIAL SPECIFICATION Foot material: stainless steel AGITATOR Agitator manufacturer: PRG Voltage: 220/380 volts Agitator arrangement: mounted laterally on cylinder Agitator equipment: agitator shaft and propeller no longer available

Condition: new, Year of construction: 2025, Production of sheet metal working machines is for us always a special challenge, when it comes to the crux, connecting important aspects like dimension, quality, precision of execution and durability of the machine built into a meaningful and functioning whole. Gsdpfecntl Sex Abhebi max. bending angle 145 degrees max. working length 3,64 m width 0,90 m hight 1.30 m max. opening 80 mm thickness of steel plate 0.65 mm The rear tray is stable and easily during disassembly Front shock absorbers guarantee for repeatability of cutting Weight: 550 kg possible payment on delivery

Condition: used, tank capacity: 1,50,000 l, GENERAL Equipment: Venting/intake, crane lugs Gbedpfsyci Alox Abhoi Construction type: upright Remarks: Minor dent in cylinder Outside diameter: 4,000 mm Total height: 11,600 mm Top head: conical bottom Location: external storage Nameplate: Volume: 150,000 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Previous application: food VESSEL Lower head: flat bottom with slope Support design: flat bottom with slope EQUIPMENT Manhole / cover: in cylinder Outlet: present

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, machine/vehicle number: K10027, control type: CNC control, degree of automation: semi-automatic, throat depth: 1,000 mm, bending angle (max.): 140 °, Equipment: CE marking, emergency stop, foot remote control, Jorns Long Folding Machine for folding Sheet Metal I have operated this machine from new. It is a very capable and reliable machine made by Jorns of Switzerland who are known to be at the very top of their game. It is capable of folding 1.2mm in steel and 2mm in aluminium. The machine has a 1m insertion depth and four backstops which are adjustable. (there is an option to add more, but we never needed to.) The machine also has a slitter installed for slitting sheets along the full length of the machine to desired width. This is all controlled from the CNC. Gbjdpfx Asx Ilx Iobhsi The machine was manufactured in 2010. It has the Jorns CNC50 control system which can be programmed with 100 different programs. The machine is very easy on power as all folding movements are hydraulicly driven. Overall the machine is in extremely good condition and can be seen operating until Mid January. Machine comes with safety light curtains. Machine will be ready for collection middle/end of January. I would prefer buyer to collect but if delivery is necessary, it could be arranged as an extra charge. Machine is approx 8m long x 2m wide and weighs approx 7 Tonne. New Jorns machine forces sale.

Condition: good (used), Year of construction: 2010, X Y Z: 1270 x 508 x 508mm, table 1324 x 457mm, 12000 rpm, BT 40, HAAS Control, 24 Station ATC, 40HP, chip auger, coolant, Godoxpw Rvepfx Abhobi Haas TR210 5 axis trunnion table

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, machine/vehicle number: 05053-00/K22170, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, working width: 6,400 mm, Working length: 6400 mm Working thickness: 1.5 mm (400 N/mm²) Without shear Back gauges Taper stop New controller (2022) Gbedpjxm Sbdefx Abhoi

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, total length: 10,000 mm, CNC 5000 control with 17-inch color TFT touchscreen. - Automatic rotary cutting - Double hydraulic clamping set for sheet metal clamping (short and long) Upper beam with water bending groove, oil filler, clamping and leveling material, emergency stop rail along the entire length of the machine, emergency stop actuation integrated into the pedal for the upper beam and bending beam, a second pedal for two-person operation, a safety device for the upper beam, two clamping fingers for short pieces The machine is repaired, inspected, and cleaned by a specialist and is fully operational. A functional test will be performed. Sheet metal width: 10,000 mm Steel sheet thickness: 1.5 mm Aluminum sheet thickness: 2.5 mm VA sheet thickness: 1.5 mm Back width: 150 - 1150 mm Color: Light blue/light gray Total power requirement: 400 V Space requirement: 12,500 x (2,367 x 700) + 2070 mm fence Insertion depth: 1150 mm Machine weight: 18,500 kg Positioning speed: 250 mm/sec Number of uprights: 8 Gbodpfx Aswnyu Dobhoi Number of clamping jaws: 8 Bending angle: 145 degrees

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 12,000 W, sheet thickness steel (max.): 80 mm, sheet thickness brass (max.): 80 mm, table length: 3,000 mm, table width: 1,500 mm, travel distance X-axis: 1,550 mm, travel distance Y-axis: 3,050 mm, travel distance Z-axis: 290 mm, workpiece weight (max.): 1,400 kg, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, total length: 9,100 mm, total width: 3,120 mm, total height: 2,200 mm, warranty duration: 24 months, working range: 3,015 mm, Equipment: centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, All New Full Cover Fiber Laser Cutting Machine | GS-CE/ GS-CE PRO Series | 3000-60000W MACHINE AVAILABLE ON HAND The machine can be loaded into a container. This GS-CE series FULL COVER FIBER LASER CUTTING MACHINE offers maximum safety for metals cutting. Thanks to its full cover structure and protective glass observation window, you can observe the operation and avoid hazards such as laser radiation, sparks, etc. It also has a fast exchange table, and the exchange is within 10s. It will be your ideal solution for safe and efficient metal cutting! Working platform size: 3000mm*1500mm, 4000mm*1500mm, 6000mm*1500mm, 6000mm*2500mm; Laser power 6KW-80KW CNC system: FSCUT Max. Acceleration：2.8G BOCI cutting head Intelligent anti-collision function Automatic lubrication Schneider relay Laser fault alarm Cooling fault alarm Laser protection glass Gbsdpfx Absub Nwdshoi Water cooler TÜV CE certificate Optional function: automatic loading and unloading system Control unit supports graphic formats: AI, BMP, Dst, Dwg, DXF, DXP External programming System complete incl. cooler, extraction system and safety light barriers Demonstration machine as good as new