Top Sanders

KÜNDIG ECO

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, feed rate X-axis: 25 m/min, workpiece height (max.): 180 mm, workpiece width (max.): 1,000 mm, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. workpiece width: 1,000 mm Min. workpiece thickness: 3 mm Max. workpiece thickness: 180 mm Max. feed speed: 25 m/min Unit 1 Unit: Combined roller/pad Material: Rubber Isdpfx Aqjyttyvjqoba Unit 2 Unit: Vertical pad MACHINE DETAILS Motor power: 1.2 kW EQUIPMENT Working table with fixed height Working level Feed belt The machine is sold and delivered in its actual and legal condition (“as seen and approved”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 6385

Condition: used, machine/vehicle number: 007984, Max. machining width: 1300 mm Min. machining thickness: 4 mm Working Table: Fixed pass height Vacuum feed belt: yes Ibjdewqdbmepfx Aqqsa No. Operating units: 4 Nr

Condition: new, Type SK-1000-P6 Iededmi Niopfx Aqqsba Working width 1000 mm Min.working length 500 mm Working thickness 2-150mm Polishing roller speed - Frequency control Feeding speed 3-12,5 m/min Total motor power 13.87 kW Disc motor 1.5 kW*1 Cross motor 1.5 kW *1 Screw roller motor 2.2 kW *2 Feeding power 2.2 kW Up and down motor 0.37kW*4 Swing motor 0.37kW *2 Working table up and down 0.55 kW Transport dimensions 3650x1850x2100mm Weight 4200 kg

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, working width: 250 mm, Coating machine / brush applicator Manufacturer: Ceetec Type: A 250 Automatic coating machine with brush application Workpiece dimensions: Width max. 250 mm Height max. approx. 100 mm Length from approx. 800 mm The coating machine is suitable for applying paints, wood preservatives, as well as oils and waxes (e.g., for exterior cladding, decking boards, etc.) Technical data: Ibjdpfeyuaptox Aqqoa - electronic diaphragm pump (no compressed air required) - spray nozzles for all-round application of wood preservatives - 12 rotating applicator brushes on 8 axes (standard nylon bristles) for 4-sided application of coating materials Workpiece feed adjustable via feed roller, approx. 16-45 m/min. Capacity approx. 960 – 2500 meters/hour Power connection 3 × 380 V EU Machine weight approx. 350 kg The machine has been cleaned and technically inspected. Hose connections, diaphragm, and brush set have been renewed. Ready for immediate use!

Condition: new, Type SK-1000-P4 Working width 1000 mm Min.working length 400 mm Working thickness 2-80mm Polishing roller speed - Frequency control Feeding speed 5-20m/min Isdpfx Aodmi Ntjqqoba Total motor power 8.14kW Disc motor 1.5kW*1 Disc swing motor 0.37kW *1 Screw roller motor 2.2kW *2 Feeding power 1.5kW Working table up and down 0.37kW Transport dimensions 2700x1700x1600mm Weight 2300kg

Condition: new, A German built and designed crosscut saw with a facility for the easy cutting of angled or straight components. A unique feature of the machine is that when angle cutting is required the saw unit pivots about a central point thus always maintaining the same cutting length. Although compact in design the machine gives large cutting capacity. Precision ball bearing movement on hardened steel runners. Sturdy cast iron construction with steel base stand. Spring return of sawcarriage. 350mm max. sawblade dia. 2KW brake motor. 30-40mm dia spindle dia. 45 - 90 - 25 degree horizontal movement (swivel) Adjustable upper protection 350mm dia TCT sawblade - 72 teeth. Cutting capacity: 350mm x 135mm deep at 90 degrees. 250mm wide x 135mm deep at 45 degrees (swivel). Dust extraction outlet 100mm Working height of table 900mm 'N' model with vertical tilting. 90-45 degrees tilt to left. Max capacity 350mm wide x 92mm deep. Ibodody Hm Eepfx Aqqea

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf uprights, height 3,500 mm with foot parts each 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Iodpfx Aemkixwjqqsba Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilevers per upright and 2 foot parts with a depth of 1,200 mm, standard = 4 storage levels one above the other per stand side - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: excellent (used), Working width: 1,360 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,360 x 1,900 mm Variable feed speed: 7 - 14 m/min Feed motor power: 1.1 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 2,160 x 2,260 x 2,025 mm Weight: approx. 2,200 kg 1st unit: Steel contact roller Motor power: 15 kW, 400 V, 50 Hz 2nd unit: Sanding pad, rigid for fine sanding of solid wood & pneumatically controlled (timed) for veneer sanding 3rd unit: Cleaning brush Abrasive belt oscillation with selector switch Feed conveyor oscillation pneumatic Motorized workpiece thickness adjustment with LED display Units equipped with emergency brake device Emergency stop button at infeed Roller table extension at infeed Complete documentation included Note – Used machines: • Subject to technical changes and prior sale. • Prices quoted are ex location – loaded on truck! • The machine has been cleaned and functionally tested. Iedpeych Igofx Aqqeba • All machines are sold as inspected, with no warranty or guarantee. Buyers are free to inspect the machines at the site. • Special agreements are only valid in writing. (We will only respond to inquiries that include your address and telephone number!)

Condition: new, functionality: fully functional, Fast universal talent for furniture construction and more 9 controlled axes High axis speeds: 130 m/min / X-axis 75 m/min / Y-axis Ibjdpfx Aqotu I Ntsqoa Machining of even the smallest parts (from 70x35 mm) Genuine 6-sided machining 2 automatic, independently controlled clamping grippers Horizontal machining also from the gripper side 3 independent drilling heads with a total of 47 drilling spindles grooving saw unit Milling spindle top and bottom Air cushion table in the infeed and working area Panel return in the outfeed Barcode scanner

Condition: used, machine/vehicle number: 008479, Max. machining width: 1650 mm Min. machining thickness: 3 mm Ibsdpfoy Edqwjx Aqqsa Working Table: Fixed pass height No. Operating units: 4 Nr