Screw compressor

KAESER CSD102

Condition: reconditioned (used), Year of construction: 2008, operating hours: 62,000 h, functionality: fully functional, machine/vehicle number: CSD 102 100260.2, overall weight: 1,280 kg, total length: 1,650 mm, total width: 1,041 mm, total height: 1,865 mm, power: 55 kW (74.78 HP), volume flow: 492 m³/h, operating pressure: 10 bar, pressure (max.): 11 bar, ambient temperature (min.): 3 °C, ambient temperature (max.): 40 °C, noise level: 69 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Kaeser CSD 102 compressor, Gcsdpfxsx Dihcs Ah Dea - complete overhaul of the screw block - complete overhaul of the electric motor - new oil cooler - regular servicing - compressor accessories maintained according to the manual - external condensation dryer VRT 500 - water-oil separator with new filling - filter set with new inserts

Condition: good (used), different twin press drinker, a good condition, immediately available If you are interested, we will be glad to inform you about other machines in our house. Gjdpfoi Arz Eox Ah Dsca You are welcome to visit the machine in our house by appointment.

Condition: excellent (used), Year of construction: 2005, operating hours: 46,952 h, functionality: fully functional, Kaeser CSD102TSFC screw compressor. 55 kW with 8.5 bar and 9.90 m3/min. Gsdpfewiwv Ujx Ah Djca Integrated dryer. Frequency-controlled. Built in 2005 with approximately 46,900 hours.

Year of construction: 2002, condition: ready for operation (used), Two compressors Kaeser are available. 1) Kaeser CSD 102 T SFC, year of manufacture: 2002, rated power: 55kW, max. operating pressure: 8.5bar, refrigerant: R134a, refrigerant quantity: 3.1kg, operating hours: approx. 132150h, load hours: approx. 129858h. 2) Kaeser BS 61, year of manufacture: 2001, rated power: 31kW, max. operating pressure: 8bar, operating hours: 91889h, load hours: 78711h. Documentation available. An on-site inspection is possible. Gsdpfx Aexph Nvoh Deca

Condition: excellent (used), Year of construction: 2008, overall weight: 1,195 kg, volume flow: 7.25 m³/h, operating pressure: 13 bar, input voltage: 400 V, ATLAS COPCO GA 37 VSD ff screw compressor Variable speed, (inverter) With refrigerant dryer Gedpfxjt Hdh Nj Ah Deca 37 kW motor Capacity 7.25 m3/min Pressure 13 bar Mileage 13200 hours The compressor is fully functional.

Condition: excellent (used), Year of construction: 2016, operating hours: 27 h, SBL 1060 SE Year: 2016 Sheet feeder: Manual non-stop pile feeder Material range: Paper and board from 470 × 350 mm to 1060 × 760 mm Max cutting format: 1050 × 740 mm Min sheet size: 470 × 350 mm Max sheet size: 1060 × 760 mm Max cutting pressure: 300 tons Material thickness: 0.1 – 2 mm (corrugated/laminated max 4 mm) Min gripper margin: 9.5 mm Max inside chase size: 1155 × 852 mm Cutting plate size: 1076 × 756 mm Max speed: 8,000 sheets/hour Power consumption: Total 32 kW (22 kW + 10 kW for lower plate heating) Machine dimensions (L×W×H): 5,900 × 5,700 × 2,615 mm Max pile height – feeder (with pallet): 1,750 mm Max pile height – delivery (with pallet): 1,450 mm Feeder Section - Pneumatic feeder table - Non-stop manual feeder system - Anti-static system - Pre-pile device - Manual suction group adjustment - Micrometric suction adjustment - Motorized side pile adjustment - Suction belt feeder table - High-pressure lubrication pump - 2 pneumatic side register guides - Electronic control of front and side register Cutting/Embossing Section - Automatic pressure adjustment up to 300 tons - Preparation and introduction table for die frames in platen - 2 quick-lock die chase frames with bottom plate - Pneumatic locking of the chase and lower supporting plate - Centerline System - Micrometric system - Heated lower support plate (24 mm) - Cutting plate: 4 mm - Compensation plate: 3 mm - Archiveable 1 mm thin cutting plate Stripping Section - Quick lock for upper and central stripper frames - 2 standard upper stripper frames - 2 standard lower stripper frames - Double accessory kit for lower stripper prep (pins, bars, clamps, etc.) Delivery Section - High-pile automatic non-stop delivery with conveyor - Guillotine for automatic removal of gripper margin waste Gsdpewypp Iefx Ah Djca - Sheet deceleration device - Tab insertion device

Condition: ready for operation (used), Max. operational pressure: 11bar, motor rotational speed: 2945/min, nominal power: 30kW, operational hours counter: 67,212h. Gcjdpfxjl Eyq Rs Ah Dea

Condition: used, Year of construction: 1998, functionality: fully functional, Machine Type: Automatic hot foil stamping and die-cutting machine Year: 1998 Manufacturer: Yawa Maximum Sheet Size: 780 mm x 540 mm Maximum Die-Cutting Pressure: 120 tons (or 144 Tn) Processing Speed: Up to 5,500 sheets per hour Hot Foil Stamping Features: 6-zone heating system Can process both longitudinal and transverse foils Material Thickness: From 90 to 600 gsm Gedpfxjxg Hzfo Ah Doca Other Features: Front and side lays Non-stop feeder and delivery options Includes chases for both die-cutting and stamping

Condition: good (used), Year of construction: 2004, functionality: fully functional, STEINEMANN LAMINATING MACHINE • TYPE : LOTUS 72 SF • SIZE : 72 x 102 cm • YEAR : 2004 DETAILS: Speed 10-80 m/min. Minimum Sheet Size: 22 x 30 cm Maximum Sheet Size: 72 x 102 cm Sheet Production: >10.000/h Sheet Weight SF: 100-600 g/m2 Adhevise Application SF: 1.5 – 4.0 g/m2 Working Width 72 cm Gcjdpfxovm Aipj Ah Dsa Film Thickness 10-50 µM Film Roll Diameter 350 mm Energy Consumption 24/66 kW It is Very Good Condition Available Immediately.

Condition: used, Year of construction: 2001, ATS-CE 340/30 bundling machine Banding machine with temperature welding Gcedsvthwfopfx Ah Dea Band width 30mm Paper and film can be used as banding material Cooling time setting Extras: Jumbo dispenser 2x available. Price plus VAT EXW. All information without guarantee. Subject to prior sale. Dealer business. The sale is made without any warranty.