Boring head 2 pieces

KAISER 145-230/225-310 mm

Condition: ready for operation (used), Erfurt Trimming press PKZe 500/1000 Power 500 to Table dimension 1020x1420 mm Stroke 400 mm Ledpfevbcxtex Afuoac No of strokes / min - 12 Main motor 41kw Movie available

Year of construction: 1971, condition: used, Technical details: max. wheel diameter: 300 mm max. module: 5 module min. : 0,5 max. workpiece weight: 60 kg weight of the machine ca.: 4,0 t dimensions of machine: 1800x1850x2500 mm dimensions electric cabinet: Nr. 1: 1930x400x1920 mm dimensions electric cabinet: Nr. 2: 800x230x1950 mm dimensions:: Abluftanlage: 1400x700x560 mm dimension cooling device LxWxH: 1,2 x 1,0 x 0,45 m Electronically controlled tooth flank grinding machine Laodpfx Ajvc Apbofujc up to module 5 and a Ø of 240 - 300 mm feed speed per workpiece revolution infinitely variable 0.4 - 3.2 mm max./min. Number of teeth: 130 / 12 max./min. Pressure angle: 30° / 14°30` max./min. Spiral pitch with 24 teeth: 6000 / 200 mm max. tooth helix angle, both sides: 45° Speed of the grinding worm: 1900 rpm without dressing device Equipment: approx. 77x change transmission wheels, pipe extensions and various tools Two of these machines are for sale. Both machines are supplied via two common control cabinets and an exhaust air system. *

Year of construction: 1998, condition: good (used), Make: UNION Laedpfx Ajkwcdbjfujc Type: Ti 1800 Year: 1998 Specifications Metric US Standard Table Length 2000 mm Table Width 1800 mm Table load 16000 Movement V-axis 1250 mm Rotation B-Axis 360.000 ° Rotation speed B-Axis 1,35 Omw/min. Movement speed V-axis 4000 mm/min. Dimensions (Estimate) Length 3400 mm Width 2000 mm Height 920 mm Weight 6500 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Universal tool milling machine Brand: OPTIMUM Model: MT 100 Year of manufacture: 2018 – workshop tested Machine no.: J33021808035 Laodpfjw Rlvqsx Afusc Geometric acceptance with test report Accessories: - 3-axis digital display DPA 2000 - Vertical milling head SK 40 with drawbar thread M 16 - Fixed table 1,120 x 260 mm (T-slot: 14 mm) - Machine lamp - Coolant system - Manual central lubrication - Operating manual Used as seen, without warranty The machine technically corresponds to the state of the art at the time of manufacture.

Condition: good (used), These listed powered tools, VDI 50, are designed for a tool changer manufactured by SAUTER and are in good condition and fully functional. They were used on a CNC turning machine, GILDEMEISTER CTX 600. 6 x powered tools, straight design, manufactured by NACKE + WTO, VDI 50 for tool turret manufactured by SAUTER: Item No.: XVI 24275 1 Drilling and milling tool, straight design, manufacturer: NACKE, VDI 50 mm, similar to DIN 69880, No. 40.5040 / 80 96 / 027.1, collet Ø 25 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 545.00 plus applicable VAT. Item No.: XVI 24277 1 Drilling and milling tool, straight design, manufacturer: NACKE, VDI 50 mm, similar to DIN 69880, No. 40.5040 / 80 96 / 027.3, collet Ø 25 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 400.00 plus applicable VAT. Item No.: XVI 2687 1 Drilling and milling tool, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 650.00 plus applicable VAT. Item No.: XVI 2687 1 Drilling and milling tool, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 650.00 plus applicable VAT. Item No.: XVI 2687 1 Drilling and milling tool, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 650.00 plus applicable VAT. Item No.: XVI 2687 1 Drilling and milling tool, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 650.00 plus applicable VAT. Lsdpsbql S Hsfx Afusac Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: new, Year of construction: 2025, turning height: 2,000 mm, workpiece weight (max.): 12,000 kg, faceplate diameter: 2,000 mm, CNC Vertical Turning Center Model: VTC-20/30 with Fanuc 31i-B Lasdpfsxqb D Nsx Afuec Table diameter: Ø2,000 mm Maximum swing diameter: Ø3,000 mm Maximum turning height: 2,000 mm Table speed: max. 200 rpm Table load capacity: 12,000 kg Table indexing: 0.001° Z-Axis (vertical ram travel): 1,200 mm Main spindle speed: max. 15 ~ 2,000 rpm Ram size: 240 mm x 240 mm Milling spindle taper: ISO 50 Tool shank size: 40 mm x 40 mm Crossrail (vertical travel): 1,000 mm 250 x 4 stages (hydraulic) Rapid traverse X-axis: 10,000 mm/min Rapid traverse 7-axis: 10,000 mm/min Cutting feed rate: 1 ~ 3,000 mm/min Table drive motor: AC 45/55 kW (continuous / 30 min.) Milling spindle drive power ISO 50: 18.5/22 kW (continuous / 30 min.) Control: Fanuc 31i-B Display unit: 15-inch TFT-LCD Tape memory: 1 MB Automatic tool changer: 12 positions (for 5 turning tools + 1 cover + 6 milling tools) Standard tool holders: New 240 TCR-01 (2 pieces) Splash guard: Table version (R-type standard) External coolant system: 3 bar (80 liters/min.) Chip conveyor: hinge-type 4-jaw independent manual chuck Foundation anchor bolts / shims Maintenance tools and toolbox Hydraulic power unit Work area lighting Signal lamp: 3 colors (green, red, yellow) Operating manuals (English): NC 1 CD with Fanuc manuals and 2 books with mechanical/electrical instructions Power supply: 220 V, 60 Hz, 3 phase Machine color: manufacturer standard OPTIONAL ACCESSORIES (#1) Automatic tool changer ATC 24 positions - on request Automatic shutdown for N.C - on request Turning tool holder type 240TCR - on request Through-spindle coolant supply: 30 bar (pump pressure) - on request Transformer 415 V, 50 Hz, 3 phase - on request Linear scales X, Z-axis - on request Rigid tapping - on request Automatic tool changer ATC 24 positions - on request Other notes: INSTALLATION, COMMISSIONING, TRIAL OPERATION AND TRAINING - not included in the price INSURANCE AND FREIGHT - not included in the price Errors in the technical data excepted. The scope of accessories applies only as explicitly described in the article’s text. Any additionally pictured accessories, for example for illustration purposes, are not included in the offer. The general terms and conditions of JS-Werkzeugmaschinen GmbH apply.

Condition: excellent (used), Year of construction: 2021, operating hours: 3,000 h, travel distance X-axis: 6,100 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 950 mm, CNC Travelling Column Milling Machine – Fully Retrofitted by REM (2021) Powerful and versatile heavy-duty milling machine, completely modernized by REM specialists in 2021 with state-of-the-art Heidenhain TNC 320 control. Ready for immediate production use. Lsdpfx Afon D N H Tjueac KEY SPECIFICATIONS: • X-axis (transversal travel): 6,000 mm • Y-axis (vertical head travel): 2,000 mm • Z-axis (axial slide travel): 950 mm • Dual-spindle head | Head rotation: 360° • Spindle speed: 1,000 – 4,000 rpm • Spindle taper: ISO 50 (automatic locking/unlocking) • Head dimensions: 290 × 290 mm • Spindle motor power: 15 kW (DC) • Machine weight: approx. 32 tonnes • CNC Control: Heidenhain TNC 320 WHY BUY FROM REM? ✔ Machine fully inspected and tested in working conditions ✔ Modern CNC retrofit – new electrics, new drives ✔ Documentation and technical support available ✔ Export worldwide | Competitive shipping Ideal for heavy component machining in aerospace, energy, and heavy industry. Contact us today for full technical specifications, photos, and video demonstration.

Year of construction: 1984, condition: used, Large grinding wheel diameter: 40 mm Small grinding wheel diameter: 5 mm Weight: 0.9 t 2 grinding wheels with flange 8 collets 1 coolant tank Mechanical feed with fixed stop Lajdjcq Rv Uopfx Afuec The universal joint for the workpiece drive is worn.

Condition: good (used), Year of construction: 1976, Centre lathe ZERBST - DPS 1800 MACH-ID 581 Make: ZERBST Type: DPS 1800 Year: 1976 Swing over bed Ø Laedpfx Afjwvir Ijuoc 1600 mm Swing over cross slide Ø 1250 mm Swing in the gap Ø 2100 mm Bed width 1400 mm Power 35 kW Speeds / ranges 180 Rpm

Condition: good (used), Year of construction: 2014, functionality: fully functional, overall weight: 2,200 kg, KUKA KRC4 linear axis 1500/3T Article number: 8143983 Serial number: 143983 Ljdpovzxg Tjfx Afujac The KUKA KRC4 linear axis is a high-precision and robust motion unit that is ideal for industrial applications. It ensures precise control of motion sequences and plays a central role in automation processes and robotic systems within production. Its stable construction ensures consistently reliable performance, even in the most demanding applications.