Portal milling machine KAO MING KMC 4000
KAO MING KMC-4000SV-H

Name: KAO MING KMC-4000SV-H
Brand: KAO MING
Availability: InStock

Year of construction

2008

Condition

Used

Location

Babberich

Portal milling machine KAO MING KMC 4000 KAO MING KMC-4000SV-H

Machine data

Machine type:: Portal milling machine KAO MING KMC 4000

Manufacturer:: KAO MING

Model:: KMC-4000SV-H

Year of construction:: 2008

Condition:: good (used)

Price & Location

Location:: Transito 21, 6909 DA Babberich, Nederland

Call

Technical details

Travel distance X-axis:: 4,230 mm

Travel distance Y-axis:: 1,950 mm

Travel distance Z-axis:: 750 mm

Table length:: 4,000 mm

Table width:: 1,250 mm

Table load:: 11,000 kg

Details about the offer

Listing ID:: A20079570

Reference number:: 9255

Update:: 30.09.2025

Description

Portal milling machine KAO MING - KMC 4000 SV-H
Double guideway two box way construction
Head changer for Multi-Face machining off larger compontents
ATC tool changer for Horizontal and vertical milling head swivabel
Distance table spindle nose 213 - 1093 mm
Distance table spindle center 130 -.mm
Indexing Horizontal head 5 Degrees x 72 positions
HeidenHain iTNC530 with HR410 handwheel
Spindle torq 1018 Nm ISO50
Universal Huron type milling head

X - Travel: 4230mm
Y - Travel: 1950mm
Z - Travel: 750mm
Distance between column:1500mm
Table Length: 4000mm
Table Width: 1250mm
Ncsdpfx Aexf E Twolheu
Table load: 11000
Feed rate X-Axis: 12000mm/min.
Feed rate Y-Axis: 15000mm/min.
Feed rate Z-Axis: 12000mm/min.
Spindle Taper: 50ISO/Bt/Mk
Power on spindle: 26kW
Speeds / ranges: 4400Rpm
ATC / revolver: 30
Chip conveyor: Yes
Coolantsystem: Yes
Length: 10100mm
Width: 4500mm
Height: 4250mm
Weight: 30000kg
Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Seller

Registered since: 2008

391 listings online

Call

Send inquiry

Telephone & Fax

+31 316 4... show

+31 316 2... show

Fax:

These listings may also fit your interest.

Listing

Portalmillingmachine Kao Ming 4000mm Kao Ming KMC-4000SVH

Lemmer

7,092 km

Portalmillingmachine Kao Ming 4000mm
Kao MingKMC-4000SVH

Call

Condition: good (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 3,750 mm, travel distance Y-axis: 1,870 mm, travel distance Z-axis: 700 mm, total length: 9,000 mm, table length: 4,000 mm, table width: 1,650 mm, total width: 3,500 mm, spindle speed (max.): 6,000 rpm, total height: 3,500 mm, distance between stands: 2,300 mm, rotational speed (max.): 6,000 rpm, overall weight: 30,000 kg, Equipment: rotational speed infinitely variable, X-axis: 3.750 mm Y-axis: 1.870 mm Z-axis: 700 mm CNC Controller: Heidenhain iTNC 530 Spindle nose: ISO 50 Spindle speed: 6.000 Rpm Toolchanger: 30 pockets Table size: 4.000 x 1.650 mm Distance between columns: 2.100 mm Featured with: - Vertical milling head attachement - Touch probe Ncodoyac T Eepfx Alhou - Cooling throught spindle - Double chip conveyor - Cooling unit - Machine manuals Country of origin: Taiwan Machine LxWxH: 9000 x 3500 x 4000 mm +/- Machine weight: 30.000 kg

See details

Listing

Wallerstein

6,746 km

CNC lathe
SpinnerTC400

Call

Condition: excellent (used), Year of construction: 2014, Manufacturer: Spinner Model: TC-400 Year of manufacture: 2014 Control: Fanuc 32iTB Max. bar capacity: Ø 52 mm Equipment: Ncedpfjwwucusx Alhju Short bar loader Spinner Servo-Load 80-1500V2 with support stand Control: Fanuc 32iTB with color LCD display/control panel 1 Drive motors for X/Z axes and spindle manufactured by GE Fanuc with digital AC technology, traversing paths X = 200 mm, Z = 515 mm. Main spindle up to 5,000 rpm / 52 mm; power 18 kW; torque 113 Nm (S6=40%). Main spindle as integrated motor spindle with water cooling, spindle nose A6. C-axis for spindle including software option 'Transmit' for face machining and 'cylindrical interpolation' for peripheral machining. Hydraulic hollow chuck cylinder. 12-position indexing turret for tool holders in accordance with DIN 69880/30 mm, 12 driven tool stations with turret for milling and drilling operations. Tailstock for TC400, MK4. Chip conveyor TC400 with enlarged L-shaped coolant tank, approx. 150 liters with centrifugal pump, 50 l/min, 3.3 bar. Parts catcher, tool setter arm, high-pressure pump, electrostatic air cleaner.

See details

Listing

București

5,507 km

Forging press
WMW ERFURTPKe 500/1000

€34,000

FCA Fixed price plus VAT

Call

Listing

Zuchwil

6,964 km

Automatic lathe
STAR MicronicsSV-20

Call

Condition: good (used), TECHNICAL DATA AXLE Rapid feed X,Y: 15000 mm/min Rapid feed A,B: 15000 mm/min Rapid feed Z1,Z2,E: 18000 mm/min Rapid feed C: 90000°/min Smallest input unit: 0.001 mm Smallest input unit, C-axis: 0.001° MACHINING PERFORMANCE Max. turning diameter: 20 mm Max. Headstock stroke: 205 mm Max. Drilling capacity: Stationary: 14 mm; Driven: 8 mm Max. Tapping capacity: Stationary: M10 x P1.5; Driven: M6 X P1.0 MAIN SPINDLE Spindle speed: 500 - 10000 rpm Drive: Spindle drive Njdpfxou Uic To Alhjcu Main spindle motor: 3.7 / 5.5 kW Main spindle bore: 26 mm WHEELING SPINDLE Max. Clamping diameter: 20 mm Max. Part length for ejection to the front: 150 mm Max. Clamping length: 75 mm Spindle speed: 500 - 10000 rpm Pick-up spindle motor: 2.2 / 3.7 kW Indexing angle: 1°, 15° CONFIGURATION Operation mode: Right-handed Dimensions: 2700 x 1400 x 2400 mm Weight: 3400 kg SCOPE OF OFFER U.A: (list not exhaustive) Control system: Fanuc Fire extinguishing system: Siemens Oil mist separator: Donaldson Transformer Hydraulic unit Parts conveyor Chip conveyor Bar feeder: LNS Tool holder Exact scope of supply according to photo gallery We assume no liability for the correctness, completeness and up-to-dateness of the information.

See details

Listing

Germany

6,760 km

PUR Foaming Plant
HenneckeHK135

Call

Condition: ready for operation (used), Year of construction: 2005, A Hennecke HK135 high-pressure polyurethane foaming system with four 25000l mixing tanks, a casting robot and two release agent robots is available. Capacity: 225t/24h, tool carriers: 42, mixing positions for additive mixing: 10, mixhead type: MQ, max. working pressure: 180bar, pressure tank: 330bar. Foam types: Rigid foam, rigid integral foam, semi-rigid integral foam, semi-rigid filling foam, cold-curing flexible foam, hot-curing flexible foam. Multiple mold foaming is possible. Complete documentation available. On-site inspection is possible. Nsdpfx Alsttbd Nohecu

See details

Listing

Herringbone Gear Generator MDV 2000 1 Mai MDV 2000

București

5,507 km

Herringbone Gear Generator MDV 2000
1 MaiMDV 2000

Call

Listing

Briquetting press 2 x RUF 330 briquetter - complet line 330

Martin

6,134 km

Briquetting press
2 x RUF 330 briquetter - complet line330

Call

Listing

Universal machining center DMG MORI HSC 75 linear

Oestrich-Winkel

6,928 km

Universal machining center
DMG MORIHSC 75 linear

Call

Condition: good (used), Year of construction: 2008, Universal Machining Center Machine type: DMG HSC 75 linear Control: Heidenhain i-TNC530 Year of manufacture: 2008 New spindle: 2025 Ncjdpsyq H Arofx Alhou Power-on hours: 63,133 h Spindle operating hours: 28,596 h TECHNICAL DATA: Travel distances: X-axis: 750 mm Y-axis: 600 mm Z-axis: 560 mm Feed rate (X/Y/Z): 90 m/min Rapid traverse (X/Y/Z): 90 / 90 / 90 m/min A-axis: -10° B-axis: +110° C-axis: 360° Spindle speed range: 28,000 rpm Tool changer Tool holder: HSK-A63 Tool stations: 60 Tool diameter: 80 / 140 mm Tool length: 300 mm NC rotary table: Ø 750 mm Max. table load: 800 kg Table size: fixed table: 950 x 650 mm Max. table load: 1,000 kg Equipment features: Chip conveyor Internal coolant supply (IKZ): [bar] Oil mist extraction Tool breakage control: Blum Laser Measuring probe Mode of operation: 4 Electronic handwheel

See details

Listing

Mazak Variaxis 500-5X II Mazak Variaxis 500-5X II

Italy

6,946 km

Mazak Variaxis 500-5X II
MazakVariaxis 500-5X II

Call

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 510 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: MAZATROL, controller model: Matrix, table width: 400 mm, table length: 500 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 22,000 W, number of slots in tool magazine: 40, number of axes: 5, This 5-axis Mazak Variaxis 500-5X II was manufactured in 2007. Ideal for complex and precise machining tasks, this vertical machining center offers versatility and reliability. If you are looking to get high-quality milling capabilities, consider the Mazak Variaxis 500-5X II machine we have for sale. Contact us for more information. Additional equipment • Swarf Conveyor Machine Benefits Technical Machine Benefits Nodpfsyalk Hsx Alhscu • A-axis: -120° / +30° • C-axis: 360° Extra Information Machine still under power

See details

Listing

Bed milling machine STYLE CNC Machines BT 4000 (XYZ:4000x1000x1000 mm)

Bunschoten-Spakenburg

7,113 km

Bed milling machine
STYLE CNC MachinesBT 4000 (XYZ:4000x1000x1000 mm)

€2,49,000

Fixed price plus VAT

Call

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: STYLE CNC Machines, number of slots in tool magazine: 24, motor manufacturer: FANUC, Delivery after consultation Ref: 24F048 Njdpfx Alsw Ty S Sjhscu Year of construction: 2025 Condition: Showroom Specifications: - X-axis: 4000 mm - Y-axis: 1000 mm - Z-axis: 1000 mm - 26 kW (S6) main motor - 8000 rpm - BT-40 - Automatic tool changer (24 positions) - Remote service (IXON) + network connection - Stronger coolant pump incl. spray gun - Upgraded to the latest STYLE software available

See details

Advertise here