Reel splitter

Klanke RGS25

Condition: new, - Motor output: 7.5 kW - Cutting force: 25 tons Ledpfjd Tfzdjx Adksrn - Cutting channel designed for: - Max. roll length: 1500 mm - Max. roll diameter: 800 mm - Machine weight: approx. 3000 kg - Tank capacity: approx. 110 liters - Hand protection grille in the area of the control panel and on the opposite side - Straight-type splitting table - Documentation: 2 copies in German (1x printed, 1x CD) - Color: RAL 5012 - light blue - Protective grille/knife bar: RAL 1028 - melon yellow Machine in stock - immediately available Price and further information upon request.

Condition: not inspected (used), Year of construction: 1985, functionality: fully functional, pressing force: 50 t, bale length: 1,000 mm, bale width: 750 mm, bale height: 75,07,50,750 mm, bale weight: 500 kg, input voltage: 400 V, overall weight: 7,500 kg, oil tank capacity: 500 l, power: 30 kW (40.79 HP), empty load weight: 7,500 kg, input frequency: 50 Hz, Manufacturer: Paal Typ: Pacomat V Year of construction: 1985 Press power main press: 50 t Specific press capacity: 5 kg/cm² Feed channel: 1.000 x 720mm (l x w) Theoretic throughput rate: 200 cbm/h Bale size: 700 x 1.000 mm (w x h) length adjustable Driving motor: 30 kW Bale weight: approx. 500 kg Machine weight: approx. 8000kg Ljdpfjic Rl Dex Adksrn The hydraulic unit is functional, the drive motor is in the removed state.

Condition: new, For slitting and shredding wound paper, cardboard, or plastic rolls onto cores. - Motor power: 7.5 kW / 32 Amps / 5-pole – 50 Hz – 3-phase - Control: PLC-supported, with two-hand safety circuit - Cutting force: 30 tons - Cutting speed: 17.3 mm/sec Cutting channel designed for: - Max. roll length: 1500 mm - Max. roll diameter: 1200 mm - Machine weight: approx. 3000 kg - Color: RAL 5012 – light blue Further information and price upon request. Made to order. Lrsdpfxef S Ir Uo Adksn

Condition: new, Year of construction: 2025, - Motor power: 7.5 kW - Cutting force: 25 tons Cutting channel designed for: - max. roll length: 1,500 mm - max. roll diameter: 800 mm - Machine weight: approx. 3,000 kg - Tank capacity: approx. 110 liters Lrsdpetvmw Dsfx Adkon - Hand protection grille at the operator control panel and opposite side - Splitting table, straight design - Documentation: 2 copies in German (1x text format, 1x CD) - Color: RAL 5012 – light blue Protection grille/knife beam: RAL 1028 melon yellow Machine in stock – immediately available Price and further information on request

Condition: new, Year of construction: 2024, Chopper knife 40 x 40 concave Ledpfxjbxu Dhe Adksrn Knife for Weima, large size ... Suitable for almost all common shredders/granulators Available from stock in Bitburg Subject to prior sale

Condition: new, Slittering machine for the efficient shredding of waste rolls. Features: - Automatic safety interlock - Knife guard - Emergency stop pull cord - Siemens PLC Technical data: Ljdpfx Aden Hyxlskern Knife length: 1500 mm Cutting channel opening: 1200 mm Motor power: 7.5 kW Cutting force: 30 tons Made to order Price and further information upon request. We will be happy to provide you with a non-binding quotation.

Condition: new, Year of construction: 2025, Motor output: 7.5 kW - Cutting force: 30 tons Cutting channel designed for: - Max. roll length: 1500 mm - Max. roll diameter: 1250 mm - Machine weight: approx. 3800 kg - Tank capacity: approx. 110 liters - Hand protection grille in the area of the control panel and on the opposite side - Knife locking mechanism - Straight splitter table design - Documentation: 2 copies in German (1 printed, 1 on USB) Lodpfx Ajltmi Sjdkjrn - Color: RAL 5012 - light blue Protective grille/knife bar: RAL 1028 - melon yellow Made to order Price and further information available upon request.

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: HBC 140 2x75kW 2001 (210-008-01), pressing force: 155 t, bale weight: 1,500 kg, pressure: 250 bar, power: 150 kW (203.94 HP), year of last overhaul: 2024, Equipment: documentation/manual, Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler and conveyor: Bollegraaf HBC140s Baler (2x75kW). Baler: Weight: 47.100 kg Construction year: 2008 Hardox bottom floor plate only Variable channel pressure control Plastic valve Hydraulic pump driven by frequency inverter Anti-rat cabling Oil in-depth filtration Modem Hours 40.000 This baler can also be sold fully refurbished according to the 'Bollegraaf OEM Certified Refurbishment standards'. This includes 2 year guarrantee. Contact us for more information or a quotation. Lrsdstvau Aepfx Adken General principles of refurbishment Cleaning & disassembly Before the actual refurbishment takes place the baler is completely cleaned and disassembled in our refurbishment workshop. Tolerances After the disassembly the tolerances of all steel components are measured and re-welded where necessary, this at least applies to the following components; • Ram, • Frame, • Channel, • Pre-press-flap After disassembly and inspection the ram is welded-up again and fitted with new ram wheels. The protective grids and the pre-press flap are made dent-free and repaired where necessary. Repainted After measuring the tolerances and any repair- and welding work, all components are being blasted and coated again. Hydraulics: The hydraulic tank is cleaned. The hydraulic lines & hoses are replaced. The hydraulic components are repackaged. The hydraulic oil is replaced. Cabling: All cabling is checked and replaced if necessary. All junction boxes are replaced and placed back in easily accessible positions. Wear parts: All wearing parts are replaced. The pins and shafts of the cylinders and the channel are replaced with new ones. All wearing parts of (both) needle installations and knotters are replaced for new. Cylinders: The cylinders are repackaged and, if necessary, provided with a new chrome layer or a new cylinder rod. MCC Cabinet The switch box is checked and cleaned. If necessary, electronic components are replaced with new ones. The PLC and HMI (human interface) are replaced with the latest Schneider M340 version including the latest software.

Year of construction: 2025, condition: new, The RS-9 shredder has been specially designed for effective processing of various types of papers, taking into account the specifications of the punching machine it will cooperate with. The shredder enables the quick and safe shredding of paper directly received from the die-cutting machine for easy transport via a conveyor system to the baler. Ledpjiklxbjfx Adksrn Our machine is not only easy to operate but also economical to maintain. It features advanced Siemens control that protects against overload. Additionally, the frequency converter ensures smooth start-up and precise motor control. We also design waste disposal systems from multiple punching machines to one shredder, allowing for fast and maintenance-free material packing into a baler. Feel free to contact us.

Condition: new, Year of construction: 2026, Consisting of a bale shredder for large round bales, type MHB, and a straw shredder, type MHZ. 1) Bale Shredder MHB: Special price from €22,975 net (manufacturing time approx. 15 weeks) Suitable for round or rectangular bales. Includes frequency inverter (FU) – this controls the speed of the scraper bed. The bales are placed on the scraper bed, and the feed of the shredder is activated. The tines of the shredder tear the straw from the bale and fling it into the hopper. The combination of a bale shredder and a straw shredder is ideal in this case. Technical data of the bale shredder: Capacity: 1-2 bales per hour up to a maximum of 600 kg per hour (depending on the screen size used in the straw shredder, kW, number of straw shredder). Without a straw shredder, the bale shredder can even process up to a maximum of 900 kg/h of straw. Maximum size of rectangular bales: 2400x1200x800 mm (l x w x h) Shredder motor: 5.5 kW, 380 Volt Scraper bed feed: 0.75 kW, 380 Volt Dimensions: 3750x1730x2460 mm (l x w x h) Lredpfxeb Nulho Adksn Weight: 400 kg 2) Straw Shredder MHZ 600 - 11/15 kW; immediately available Special price from €6,995 net Additional cost for the even larger straw shredder (18.5 kW): + €2,750 net Technical data, MHZ with special hopper: Motor: 15 kW, 380 Volt electric motor Diameter: 600 mm Hardened cutting blades Screen with interchangeable inserts Optional (10, 12, 15) 22, 30, 45 mm hole size With star-delta starter, overload protection and 8 m supply cable, ready for connection Discharge nozzle: 160 mm Throwing distance: approx. 12 m Dimensions: approx. 1600 x 1020 x 1360 mm (l x w x h) Weight: approx. 240 kg --- Options at an extra cost: Infeed auger: + €970 net Cyclone (mounting to be carried out by the customer): *should be located a maximum of 10 m away. + €2,970 net Simple filter: €1,750 net --- Other options: Industrial extraction system (demonstration model): + from €9,950 net Optionally with rotary valve *makes the material pressure-free: + €5,750 net Control system: from €1,620 net Special shredder extension, 3 m *other sizes would need to be calculated: + €9,750 net Briquetting press MPP 180 S; slightly used demonstration model 70 mm briquettes - up to a maximum of 100 kg/h From €39,700 net *larger machines on request --- Description: The muetek bale shredder was developed for shredding round and rectangular bales of hay and straw. The shredder, which is flange-mounted to the bale shredder, shreds straw from all types of grain, hay, corn, and miscanthus. The muetek machines in the MHZ/MHB series are characterized by a robust design and solid construction. The muetek bale shredders in the MHB series are equipped with a chain conveyor onto which the straw bale is placed using a front loader. The support is adjustable depending on the type of bale. The chain conveyor pushes the bale against the shredder rotor, and the feed speed is adjustable. The shredder rotor is equipped with several tines that tear the straw bale apart. The straw detached from the bale is ejected. --- In principle, the machines are designed for dry materials: - Straw - Hay --- Shredding hemp only works with a special shredder. Additional cost: approx. €9,720 net *depending on the design. Shredding hemp does not work with the straw shredder. Requirements for the raw material: Moisture content: maximum 12%