Sanding belts

KLINGSPOR

Condition: good (used), Year of construction: 2007, travel distance X-axis: 1,740 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 660 mm, rapid traverse X-axis: 36,000 m/min, rapid traverse Y-axis: 36,000 m/min, rapid traverse Z-axis: 36,000 m/min, table width: 760 mm, table length: 2,000 mm, table load: 1,400 kg, IKZ 15 BAar Measuring probe MP12 Bohrzyklus with torq depending Performance package Pendel screen Interface set X - Travel: 1740mm Y - Travel: 760mm Z - Travel: 660mm Table Length: 2000mm Table Width: 760mm Table load: 1400 Feed rate X-Axis: 36000mm/min. Feed rate Y-Axis: 36000mm/min. Feed rate Z-Axis: 36000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 15kW Speeds / ranges: 12000Rpm ATC / revolver: 30 Coolant through spindle / Bar:Yes Number of controlled axis: 3 Chip conveyor: Yes Coolantsystem: Yes Length: 4450mm Nwsdpfew Rntrox Abbsp Width: 3460mm Height: 2900mm Weight: 10500kg

Condition: good (used), drilling capacity: ca. 13 mm spindle taper: B 16 MK throat: 250 mm table size: 220 x 325 mm spindle turning speed range: 350 - 1500 u. 750 - 3000 rpm engine: 380 V, 0,3/0,4 kW Nsdpjd In Sfsfx Abbjwp space needed: 680 x 400 x 1670 mm

Condition: used, Details on request Nodeb E Evbspfx Abbowp

Condition: good (used), Year of construction: 2005, operating hours: 39,256 h, functionality: fully functional, travel distance X-axis: 780 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, total height: 2,800 mm, total length: 7,000 mm, total width: 7,000 mm, rotational speed (max.): 12,000 rpm, overall weight: 12,000 kg, For sale is a machining center by Deckel Maho, model DMC 60 T. The machine is in good condition and ready for immediate use. Technical data: Year of manufacture: 2005 Operating hours: 39,256 Power-on hours: 72,107 X-axis travel: 780 mm Y-axis travel: 560 mm Z-axis travel: 560 mm Control: iTNC 530 Heidenhain Spindle speed range: 20 - 12,000 rpm Main spindle drive power: 28 / 19 kW Max. torque: 125 Nm Tool holder: SK 40 B-axis infinitely adjustable: 150° (-120/+30)° Number of pallets: 2 Pallet size: 630 x 500 mm Max. load: 400 kg Table speed range: max. 30 rpm Number of tool stations: 120 positions Max. tool diameter: 80 mm Max. tool diameter with adjacent pocket empty: 160 mm Max. tool length: 315 mm Max. tool weight: 8 kg Rapid traverse ( X / Y / Z ): 50 m/min Feed rate: 20 - 15,000 mm/min Total power requirement: 64.2 kVA Machine weight: approx. 12.0 t Floor space required: approx. 7.0 x 7.0 x 2.8 m Included in the offer: Documentation, chip conveyor, coolant system, high-pressure coolant 40 bar through spindle, Nwodpfx Aswtft Nobbsp paper band filter, 2-position pallet changer, tool breakage monitoring Accessories such as clamping devices or tool holders are NOT included in the offer. Transport and loading can be organised throughout Europe at additional cost upon request. Prices are subject to VAT. Inspection is possible by appointment. Please contact us; our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Condition: good (used), Year of construction: 2006, operating hours: 1,19,571 h, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 45,000 m/min, rapid traverse Y-axis: 45,000 m/min, rapid traverse Z-axis: 45,000 m/min, controller model: Siemens 840 D, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hermle C30 U Siemens 840D Machine ON: 119,571 h, Spindle ON: 56,792 h - Spindle HSK-A63 10,000 rpm - 32 tool stations - Rotary table SRT 280 mm with integrated clamping system HSK100 (if not needed, it can be covered or alternatively converted to a zero-point clamping system) - External coolant supply - Internal coolant supply with 80 bar paper band filter - Chip flushing gun - Chip conveyor - Handheld control module - Automatic cabin door - 32 tool stations plus 87 additional stations ZM87 - Thermal compensation - BLUM tool measurement on the side - Renishaw probe Njdoxcp Srjpfx Abbjwp - Chip container - Status light The machine has been thoroughly inspected and comes with a geometry report as well as circularity test measurements. The machine can be viewed and tested under power at any time. Very well-maintained condition.

Condition: good (used), Year of construction: 2003, X 1740mm, Y 766mm, Z 660mm 10000 rpm Nsdpfxswyblzo Abbowp Parts shown by hand not come.

Condition: excellent (used), Spot welding machine with single stroke cylinder and top and bottom flange electrode holder Make DALEX type PMS 14-3 throat depth: 350 mm Rated power at 50 % duty cycle: 80 kVA Sec. short-circuit current: 54.5 kA Njdpfx Astuwz Iobbswp Sec. open-circuit voltage: 7-14 V Electrode force: 80-1,200 daN equipped with: 8 tap changer main switch HARMS+WENDE add-on control cabinet Synchronous welding control unit MPS 200 multi R1 8 welding programs Welding current monitoring with AEG type plate Start via foot switch

Year of construction: 1972, condition: ready for operation (used), Table Ø: 300 mm Njdpfod Rlifox Abbewp Overall height in horizontal position: 155 mm Width: 500 mm Depth: 500 mm

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 3220, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,300 mm, Mechanical general overhaul in 2025 Base machine – Travel paths X = 2,000 mm / Y = 1,300 mm / Z = 1,300 mm Machine column Torsion-resistant welded construction with three hardened compact roller guides, protected against chips and coolant. Spindle carriage Cast design with hydraulic weight compensation, guided on compact roller guides. Machine bed Self-supporting Hydropool composite structure, no foundation required. Precision compact roller guides on the X-axis. CNC rotary table (motorized) Ø1600 mm clamping area, 8 longitudinal T-slots (22 mm), 2 alignment slots, T-slot pitch 160 mm, centering bush Ø50 H7, runout 0.010 mm, flatness 0.020 mm. Indexing accuracy ±4”, max. rotation speed 5 rpm, tilting moment 60,000 Nm, maximum table load 6,000 kg, max. workpiece swing diameter 2,300 mm (up to 320 mm above table). Table top shows normal wear. Automatic tool changer Chain magazine for 48 tools, max. Ø 125 mm (250 mm if adjacent slots are free), max. length 400 mm, max. weight 25 kg. Tool interface SK50 DIN 69871, spindle position horizontal, fixed position coding and pneumatic spindle taper blow-out. Spindle head with universal milling head (UFK) Automatic 360 × 1° and 180 × 1° swivel, 64,800 programmable positions. Tool interface SK50. Hydromechanical quick tool clamping (pull force 20 kN). Main drive liquid-cooled, 30 kW at 100% duty cycle (41 kW at 40% duty cycle), speed range 36–6,000 rpm. Digital feed drives AC individual drives, infinitely variable 2–30,000 mm/min on all axes, acceleration up to 2 m/s². Operation / control Swiveling control panel with Heidenhain iTNC 530 CNC control. Measuring systems Direct, contactless linear measuring systems. Electrical equipment According to EN 60204 / VBG 4, 400/230 V, 50 Hz, total connected load approx. 50 kVA. Control cabinet IP54 with control and switching devices, wired via plug-in system. Lubrication Guides: centralized impulse lubrication. Main spindle: permanent grease lubrication. Paintwork Machine/control cabinet RAL 7035, milling head/spindle head RAL 5021, DD textured paint (silk gloss, oil/soda resistant). Work area enclosure 2 angular sliding doors at the front + roof, rear wall with protective cover, side viewing window. Power connection 400 V, 3-phase, 50 Hz, 50 kVA, 125 A slow-blow, compressed air 4–6 bar (incl. filter pressure regulator & condensate separator). Coolant system Switchable coolant supply (nozzle ring/internal for SK DIN 69871 AD). Compact paper band filter unit, adjustable flow through bypass valve. Pump capacity 32 l/min at max. 20 bar. Tank capacity 500 l. Chip conveyor Travel distance approx. 2,000 mm, feed width approx. 350 mm, discharge height approx. 1,250 mm. External electronic handwheel (HR 410) Switchable to 3 axes (optionally up to 5 axes, not for universal head axes). Nwjdpfxow N Nx Hs Abbep Collision monitoring Single-channel system for monitoring machine and, to a limited extent, tool collisions.

Condition: used, with mounted three-jaw chuck table-Ø: 200 mm bore approx.: 18 mm Nedpfoda I Rvex Abbowp overall height: 100 mm total height with chuck: 165 mm width: 270 mm length: 320 mm