WHEEL LOADER

Komatsu WA500-7

Condition: new, axle configuration: > 3 axles, suspension: hydraulics, tire size: 215/75R17.5, color: red, Year of construction: 2024, Color: Red Wheelbase: 150 cm. Load capacity: 443,800 kg. Loading floor height: 100 cm. Expandable Braked Goldhofer THP SL 10 (6+4) Manufacturer: Goldhofer Type: THP SL6 & THP SL4 Year: New/Unused Chassis numbers: WG0THPS69R0043538, WG0THPS49R0043537 Details THP SL 6 Maximum axle load: 45,000 kg per axle Total axle load: 6 x 45,000 kg = 270,000 kg GVW: 270,000 kg Empty weight: 20,750 kg Loading capacity: 249,250 kg Total length: 13,250 mm Loading floor width: 3,000 mm Height: 1,175mm. (+/- 300) Details THP SL 4 Maximum axle load: 45,000 kg per axle Total axle load: 4x 45,000 kg = 180,000 kg GVW: 180,000 kg Empty weight: 13,850 kg Loading capacity: 166,150 kg Total length: 10,250 mm Loading floor width: 3,000 mm Height: 1,175mm. (+/- 300) Dujdoux A Hvopfx Ag Rol Goldhofer SH 35/2 Universal Gooseneck + PPU Manufacturer: Goldhofer Type: SH 35/2 Universal Gooseneck Year: New and unused Chassis number: WG0SH000XR2043537 Main features Gooseneck Loading platform: 3,700mm x 2,440mm 3.5 inch king pin Hydraulic lifting and lowering Hydraulic supporting cylinders Coupling height: 1,450 mm Integrated lashing coupling Lashing all around Spare wheel + Spare wheel carrier Hydraulic locking pin Auto lube for gooseneck with pump, Beka-MAX Main features Hatz Diesel PPU Hatz 1 Cylinder Diesel Engine (silent pack) @ 9.6 kW 240 liter hydraulic oil capacity powder coated tank Capacity of 35 l/m and 250 bar max working pressure 3x different quick connector sizes for pressure connection 3x different quick connector sizes for tank connection Electric RPM control General Information Year of manufacture: 2024 Axle configuration Tire size: 215/75R17.5 Axle brand: BPW ECO PLUS Suspension: hydraulic suspension Front axle 1: Twin tires; Lift axle; Max. axle load: 45,000 kg; Steered; Tire profile left inner: 100%; Tire profile left outer: 100%; Tire profile right inner: 100%; Tire profile right outer: 100% Front axle 2: Twin tires; Lift axle; Max. axle load: 45,000 kg; Steered; Tire profile left inner: 100%; Tire profile left outer: 100%; Tire profile right inner: 100% Tire profile on the right outermost side: 100% Front axle 3: Dual tires; Lift axle; Max. axle load: 45,000 kg; Steered; Tire profile on the left inner side: 100%; Tire profile on the left outer side: 100%; Tire profile on the right inner side: 100%; Tire profile on the right outer side: 100% Front axle 4: Dual tires; Lift axle; Max. axle load: 45,000 kg; Steered; Tire profile on the left inner side: 100%; Tire profile on the left outer side: 100%; Tire profile on the right outer side: 100% Rear axle 1: Dual tires; Lift axle; Max. axle load: 45,000 kg; Steered; Tire profile on the left inner side: 100%; Tire profile on the left outer side: 100%; Tire profile on the right inner side: 100% Tire profile on the right outermost side: 100% Rear axle 2: Dual tires; Lift axle; Max. axle load: 45,000 kg; Steered; Tire profile on the left inner side: 100%; Tire profile on the left outer side: 100%; Tire profile on the right inner side: 100%; Tire profile on the right outer side: 100% Rear axle 3: Dual tires; Lift axle; Max. axle load: 45,000 kg; Steered; Tire profile on the left inner side: 100%; Tire profile on the left outer side: 100%; Tire profile on the right inner side: 100%; Tire profile...

Condition: ready for operation (used), Cone Crusher Svedala Brand: Svedala Dsdpfx Agopn I H Ts Reul Type: 36/H/MC Incl.: basic chasis and oil unit

Condition: good (used), functionality: fully functional, power: 201 kW (273.28 HP), fuel type: diesel, color: yellow, overall weight: 26,300 kg, machine/vehicle number: 63X1784, Equipment: cabin, hydraulics, Product Description Used Wheel Loader Machine Manufactured by Caterpillar Model CAT 980C Operates on Diesel Engine Machine sold as its condition Dujdpsum Ebqofx Ag Rol VIJAY JPN Industrial Trading Pte Ltd 13A pandan crescent, Singapore 128478

Condition: used, mileage: 2,47,575 km, power: 77 kW (104.69 HP), first registration: 11/2016, fuel type: diesel, empty load weight: 2,248 kg, maximum load weight: 551 kg, overall weight: 2,799 kg, fuel: diesel, CO₂ emissions: 172 g/km, fuel consumption (urban): 7.3 l/100km, fuel consumption (extra-urban): 6.1 l/100km, fuel consumption (combined): 6.5 l/100km, color: white, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: other, number of seats: 3, total length: 5,120 mm, Year of construction: 2016, construction height: 1,980 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, traction control, trailer coupling, AdBlue system malfunction. The Ford Transit Custom 290 2.0 TDCi is a reliable used car, ideal for business people. It was first registered in November 2016 and has a mileage of 247,575 km. With a powerful 2.0-liter diesel engine and an output of 77 kW (105 hp), it offers efficient performance and meets the Euro 5 emissions standard. The vehicle is equipped with a manual transmission and has an average consumption of 6.5 l/100 km. The panel van model is characterized by practical equipment features, including air conditioning, cruise control, trailer hitch (AHK) and workshop fittings. Driver and passenger airbags as well as modern assistance systems such as the hill start assist ensure safety. Additional features such as an on-board computer, parking pilot system front and rear, and adjustable steering column increase driving comfort. The rear wing doors with a 180 degree opening angle and a sliding door allow for flexible loading options. The vehicle is in good condition, but the AdBlue system has a fault. The loading volume is optimized by a high partition. Other highlights include the medium-high roof variant, tinted glazing and an extensive interior filter. The dimensions are 5,120 mm in length, 2,032 mm in width and 1,982 mm in height. With a green environmental sticker, the Transit can be used in many environmental zones. Special equipment: Airbag on passenger side, vehicle without vinyl floor covering in the loading/passenger compartment, rear wing doors with glazing (opening angle 180 degrees), tailgate without glazing, high loading compartment partition behind driver and passenger, with window and through-loading option below, parking pilot system front and rear, visibility package 1 Other equipment: Airbag on driver side, traction control (ASR), basic, indicator light integrated in exterior mirror, on-board computer, electric brake force distribution (EBD), driver assistance system: hill start assist, interior filter: pollen filter, body/structure: high-space box, body variant: medium-high roof, steering column (steering wheel) adjustable in height/length, truck registration, engine 2.0 liter - 77 kW TDCi KAT, radio preparation, 4 speakers, wheelbase 2933 mm, spare wheel in driving tires, low emissions according to Euro 6 emission standard, headlights H4, sliding door in the loading/passenger compartment on the right, mud flaps at the front and rear, side protection strips, bumpers partially painted, tinted glazing, paneling in the loading/FG compartment: half-high, lashing rails on the side of the loading compartment Equipment was determined using a VIN query, errors can occur here for technical reasons COC is available Dodpstyz D Njfx Ag Reul Only sold to tradespeople (agriculture, freelancers, small and large businesses) or export. Errors and prior sale reserved.

Condition: new, Parallel lathe with display Fervi T075/400V3A. Monoblock cast iron base. Height of Centers 230 mm Max. diameter on Bench 460 mm Max. diameter on Carriage 270 mm Max. diameter on Slot 690 mm Tool Height 25 mm Distance between Centers 1500 mm Distance between Guides 300 mm Bar Taper CM MT7 Bar Passage 58 mm Spindle Attachment Camlock D1-8 Spindle Speed (12)25-1700 rpm Longitudinal Feeds (42) 0.031 - 1.7 mm/rev Cross Feeds (42) 0.014 - 0.784 mm/rev Metric Threads (41) 0.1 - 14 mm Inch Threads (60) 2 - 112 TPI Tailstock Spindle Stroke 130 mm Tailstock Taper CM MT4 Motor 400 V 50 Hz 5.5 kW Coolant Pump 400 V 50 Hz 90W Machine Dimensions 2750 x 1080 x 1370 mm Net Weight 2020 kg Total Dimensions 2870 x 1180 x 1570 mm Gross Weight 2200 kg Accessories Included: 3-jaw self-centering chuck Ø250 mm / D1-8 4-jaw self-centering chuck Ø300 mm / D1-8 Drive flange Ø350 mm Fixed steady rest Moving steady rest Reduction bushing CM 7 / 4 Fixed tailstock CM 4 Rotary tailstock CM 4 Thread comparator Turret guard Spindle guard Rear splash guard Quick change turret type B LED lamp Cooling system Electromechanical foot brake Bathed carriage gears oil Duodpfx Aovbqv Heg Rol Quick-lock tailstock carriage

Year of construction: 2019, condition: refurbished (used), Overband plate magnet Dsdpfx Asd Dzahjg Rsul Version in VA 1.4301 tightly welded 420 x 250 x 100mm completely welded housing Ring eyelets for suspension

Year of construction: 2018, condition: new, Permanent overband magnetic separator TYPE PEM2200 2200 x 1000 x 400mm ===== Dsdped Dy S Defx Ag Rsul 4x eyebolt for suspension Rubber band GB30 Magnetic dimensions: 1200x500mm

Year of construction: 2025, condition: like new (used), Portalkran 2x125 ton 30 Meter Hubhöhe Baujahr 2014 Dusdsgmdnfopfx Ag Rol

Condition: used, functionality: fully functional, power: 75 kW (101.97 HP), fuel type: diesel, color: yellow, operation weight: 14,500 kg, Year of construction: 2014, operating hours: 10,800 h, machine/vehicle number: DCH145R6NEE6E1274, Equipment: cabin, gripper hydraulics, Short-tail excavator with log grapple Bucket attachments included, bucket not included Duedpfowdgx Uex Ag Rjl Please contact me via email. I'll get back to you as soon as possible. If you leave a phone number, I'll call you back.

Condition: good (used), Plasma cutting machine, plasma cutter, for plasma cutting system Dodpfxowd Tg Se Ag Roul -Manufacturer: Hypertherm -Type: HySpeed HT2000LHF -Equipment: with hose package and cutting nozzle head -Max. cutting current: 200 A -Dimensions: 1100/720/H1040 mm -Weight: 459 kg