CNC Milling Machine

KUNZMANN WF 4/3

Condition: good (used), Horizontal milling device – counterholder for KUNZMAN milling machines series WF. Dedpsvr Stuofx Ag Rekg This was an accessory for a KUNZMANN WF 4/3 TNC 124 There are 2 pieces available. The new price at Kunzmann is over € 2,000 + VAT. With a corresponding adapter plate it should also fit other machines e.g. EMCO, MIKRON; DECKEL; FPS etc. Price net ex warehouse

Year of construction: 2014, condition: ready for operation (used), A defective CNC precision surface and profile grinding machine ABA is available. Grinding length: 2500mm, grinding width: 1020mm, cross travel: 920mm, cross feed intermittent: 750mm/pulse, cross feed continuous: 5000mm/min, table spindle center distance: 1100mm, magnetic plate dimensions X/Y: 2500mm/1000mm, max. table load: 5000kg, table speed: 60m/min, spindle power: 26kW, grinding wheel dimensions X/Y/Z: 500mm/100mm/203mm, grinding wheel rotation speed: 35m/s. Machine dimensions X/Y/Z: approx. 8000mm/4000mm/3150mm, weight: approx. 20000kg, control: Siemens Sinumerik 840 D-Solutionline, operating hours: approx. 1000h, cycle time: approx. 400h. Including cooling unit Hyfra sigma 13-S, year of manufacture: 2014. The linear drive of the X-axis is defective and has been dismantled. Documentation available. On-site inspection is possible. Dksdpfowi Tpksx Ag Rsg

Condition: good (used), Year of construction: 1996, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 1 rpm, quill stroke: 60 mm, A Kunzmann milling machine of the type WF 4/3 is for sale The machine is fully functional and ready for immediate use Technical data Control: Heidenhain TNC 124 Year of manufacture: 1996 Working range longitudinal X - axis: 400 mm transverse Y - axis: 350 mm vertical Z - axis: 400 mm Angled table, rigid Clamping surface: 650 x 350 mm Max. load: 250 kg Main drive AC motor: 5.5 kW Feed drives AC - single drives Feed infinitely variable 0 - 2 000 mm/min Tool holder: SK 40 Speed range: 1-4000 1/min Quill, vertical: stroke 60 mm Swivel range vertical milling head: ± 90° Tool clamping: hydraulic Linear stroke measuring systems, direct, distance-coded Resolution 0.001 mm Position deviation Pmax according to VDI/DGQ 3441 0.015 mm 0.015 mm Operating voltage 400 Volt, 50 Hz Power consumption approx. 12 kVA Weight approx. 1,750 kg On request, transportation and loading can be arranged at extra cost. organized throughout Europe. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? Dsdjvftrxspfx Ag Rjkg For further information or contact options, please visit our website

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 124 Control Very Good CONDITION CE-Compliant!! Technical Data: >> Year of manufacture: 2003 Machine No. 344174 >> Fixed angular table >> Infinitely variable spindle speed up to 4000 rpm >> Infinitely variable feed in 3 axes from 0 to 2000 mm/min >> Travel distances X/Y/Z: 400/320/400 mm >> Table area: 650 x 350 mm >> Table load: 250 kg Dsdsx Elxpjpfx Ag Rskg >> Vertical quill stroke: 60 mm >> Vertical and horizontal quill - SK40 >> Hydraulic clamping system >> Weight approx. 1800 kg >> Space requirements approx.: 2.3 x 2 x 2 m >> Drive power: 12 KVA Accessories and Equipment: >> Heidenhain TNC 124 control >> Hydraulic clamping, vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, control manual, and programming examples >> Handwheels >> Coolant system >> Electronic handwheel Heidenhain About the Machine: Offered here is a Kunzmann WF4/3 tool milling machine with a Heidenhain TNC 124 control. This universal milling machine is in very good condition. It comes from a facility where it was only sparingly used for training purposes. The control system is very easy to operate. The machine also features hydraulic clamping both vertically and horizontally. Converting from vertical to horizontal operation is very straightforward by simply swiveling the vertical head aside. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected in our workshop. You are welcome to view and test the Kunzmann under power at our facility. The machine is available immediately.

Condition: excellent (used), Year of construction: 1977, grinding diameter 350 mm grinding length 1000 mm centre height 100 mm grinding wheel diameter 360 mm total power requirement kW weight of the machine ca. 3,8 t dimensions of the machine ca. 3,5 x 1,3 x 1,5 m Machine in very nice condition, external + internal spindle, many accessories. Dkedpfjunt Eyjx Ag Rog

Condition: ready for operation (used), Year of construction: 1998, General Data Measurements width 2000 MM Measurements depth 2000 MM Measurements height 2000 MM Movement X-Axis Movement 400 mm Y-Axis Movement 320 mm Z-Axis Movement 400 mm Tools Dsdpfx Aox D Er Rog Rjkg Type of tool holder Sk40 This KUNZMANN WF4/3 universal milling machine was manufactured in 1998. It features a clamping surface of 650 x 350 mm, a maximum load capacity of 250 kg, and a tool holder SK40. Speed ranges from 40 to 2500 rpm with a quill stroke of 60 mm. The machine includes a control cabinet and weighs approximately 1300 kg. Ideal for precise milling applications. Reach out for more information about this machine. Application Types Milling

Condition: used, Univ. NC tool milling machine KUNZMANN type WF 3/4 Machine. No. 341020 Year of construction 1998 Travel X: 400 mm Y: 320 mm Z: 400 mm Table size 650 x 350 mm Spindle holder SK 40 Spindle speed 40 - 2500 rpm. Feed rates X, Y and Z-axis 0 - 1000 mm/min. infinitely variable Rapid traverse X, Y-axis 4000 mm/min. Rapid traverse Z-axis 3000 mm/min. Vertical pinol adjustment 60 mm Drive power spindle motor 3 KW Mains connection 400 Volt, 50 Hz - CNC line control Heidenhain TNC 124 - Spindle speed via 2 gear stages and infinitely variable via electronically controlled variator gearbox - Vertical milling head can be tilted +/- 90 - Hydraulic tool clamping Dkodpjlvyrbjfx Ag Reg - Fixed angled table - Control cabinet fixed to the machine - Coolant tank with pump adjacent - central lubrication - central lighting Space requirement L x W x H 1800 x 1800 x 1900 mm Weight 1300 kg Good condition

Condition: ready for operation (used), Year of construction: 2001, CNC milling machine TOS TV-1000 A CONTUR Manufacturer: Trens Model: MC 100 VA Year of construction: 2001 Condition: used Control unit: Heidenhain TNC 426 X-axis travel: 1000mm Dkodpjhlp Iwjfx Ag Rjg Y-axis travel: 600mm Z-axis travel: 760mm Table length: 1080mm Table width: 580mm Tool changer with 40 positions Tool holder according to ISO 40 Spindle speed: 8000 rpm Overall dimensions: L 3200 x W 2100 x H 2900 mm Weight: 6200 kg Shipping possible throughout Germany and Austria. Surcharge 1000 € Sale excluding warranty.

Condition: used, Year of construction: 1996, x-travel 400 mm y-travel 350 mm z-travel 400 mm tool taper SK 40 spindle turning speed range 1,0 - 4.000 U/min feeds 0 - 2000 mm/min quill stroke 60,0 mm table-size 650 x 350 mm T-slots 14 H7 Dksdpfxow U U Sij Ag Rog Control TNC 124 engine output 5,5 kW weight 1800 kg dimensions of the machine ca. 2000 x 1000 x 2100 mm New price ~ 55.000 euros (!!) Furnishing : - Universal tool milling machine - HEIDENHAIN pattern control TNC 124 - The control panel can be swiveled to the right of the machine - hydraulic tool changer (DIN 69872) - Vertical milling head - SK 40 - X-axis feed .. 0 - 2000 mm / min - Y-axis feed .. 0 - 2000 mm / min - Feed Z-axis .. 0 - 2000 mm / min - Central lubrication, electrical - coolant device - Chip tray - Operating instructions for machine + control Special accessories included: - hydraulic machine vice - many tool holders - HEIDENHAIN HR 410 electronic handwheel

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, Tool milling machine Kunzmann WF4/3 Heidenhain digital display year of manufacture 1994 very good CONDITION!! Technical data: >> Year of manufacture 1994 >> Rigid angle table Dodovyr R Nepfx Ag Rekg >> Speed from 40 to 2550 rpm Biojv7Igbpa >> Continuous feed in X Y Z axis from 0 to 2000 mm/min >> Travels X/Y/Z: 400/320/400 mm >> Rapid traverse in all axes >> Vertical quill stroke: 60 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic tightening system >> Weight approx. 1500 kg Accessories and equipment: >> 3-axis Heidenhain digital display >> Electric central lubrication >> Machine feet >> Handwheels >> Coolant system About the machine: Offered is a Kunzmann WF4/3 tool milling machine in very good condition. It comes from a state-owned company where it was only used a little. Converting from vertical to horizontal is very easy, by folding away the vertical head. The Kunzmann has been mechanically and electrically tested by us. Take the opportunity to view and try out the Kunzmann on site with power.

Condition: new, sheet thickness steel (max.): 4 mm, - Capacity 4 mm - Adjustment of the hydraulic roller - foot switch - Brake motor Dkodpfxsgg Nq Ho Ag Rog - With 4 roller sets - Emergency stop - 400V

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 CNC Control – Excellent Condition, CE-Compliant, from Training Workshop! Technical Specifications: • Year of manufacture: 2010, Machine No. 347283 • Fixed angular table • Infinitely variable spindle speed up to 4,500 rpm • Infinitely variable feed in 3 axes from 0 to 2,000 mm/min • Rapid traverse X and Y axis: 5,000 mm/min Z axis: 4,000 mm/min • Travel X/Y/Z: 400/350/400 mm • Table size: 650 x 350 mm • Table load capacity: 250 kg • Vertical quill stroke: 60 mm • Vertical and horizontal quill – SK40 taper • Hydraulic clamping system • Weight approx. 1,800 kg • Space requirement approx.: 2.3 x 2 x 2 m • Drive power: 15 KVA Djdpfexuppuex Ag Rjkg Accessories and Equipment: • Heidenhain TNC 320 CNC control • Hydraulic clamping, vertical and horizontal • Automatic central lubrication • Spindle brake • Technical documentation, spare parts diagrams, control manuals and programming examples • Handwheels • Coolant system • Electronic handwheel HR410 About the Machine: Offered for sale is a Kunzmann WF4/3 tool milling machine with Heidenhain TNC 320 CNC control. This universal milling machine is in excellent condition and has seen very few operating hours. It comes from a facility where it was used exclusively for training purposes. The control is very user-friendly. Additionally, the machine features hydraulic clamping both vertically and horizontally. Changing from vertical to horizontal operation is very straightforward by swinging away the vertical head. The ways are regularly lubricated via the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. You are welcome to view and test the Kunzmann on-site under power. There are 7 units of Kunzmann WF4/3 with the TNC 320 Heidenhain milling machines available. The machines are available immediately.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Kunzmann WF4/3 Tool Milling Machine with Heidenhain TNC 320 Path Control – Excellent Condition, CE-Compliant, from Training Workshop! Technical Data: - Year of manufacture: 2010 Machine No. 347284 - Fixed angular table - Spindle speed: Infinitely variable up to 4500 rpm - Feed rate: Infinitely variable in 3 axes from 0 to 2000 mm/min - Rapid traverse X and Y axes: 5000 mm/min - Rapid traverse Z axis: 4000 mm/min - Travel distances X/Y/Z: 400/350/400 mm - Table surface: 650 x 350 mm - Table load: 250 kg - Vertical quill stroke: 60 mm - Vertical and horizontal quill – SK40 - Hydraulic clamping system - Weight approx. 1800 kg - Overall dimensions approx.: 2.3 x 2 x 2 m - Drive power: 15 KVA Accessories and Equipment: - Heidenhain TNC 320 path control - Hydraulic clamping vertical and horizontal - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, control operating manual, and programming examples - Handwheels - Coolant system - Electronic handwheel HR410 About the Machine: For sale is a Kunzmann WF4/3 tool milling machine equipped with a Heidenhain TNC 320 path control. This universal milling machine is in excellent condition and has very low operating hours. It comes from a facility where it was used exclusively for training purposes. The control system is very user-friendly. Additionally, the machine offers hydraulic clamping both vertically and horizontally. Conversion from vertical to horizontal operation is very straightforward thanks to the folding vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take advantage of the opportunity to inspect and test the Kunzmann under power on site. Seven units of the Kunzmann WF4/3 with TNC 320 Heidenhain milling machines are available. The machines are ready for immediate delivery. Dkodpfx Agexupdls Rjg

Year of construction: 1969, condition: ready for operation (used), Max. grinding depth: 80mm, distance spindle table: 145mm, spindle bore: 28mm, connected load: 7kW, length: 2100mm, width: 1400mm, height: 950mm, weight: 1.6t, with documentation, an inspection is possible. Dksdeqzkdmepfx Ag Rjg

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Kunzmann WF4/3 Tool Milling Machine with Heidenhain TNC 320 Contouring Control – Excellent Condition, CE-compliant, from a Training Workshop!! Technical Data: >> Year of manufacture: 2010, Machine No. 347247 >> Fixed angle table >> Infinitely variable spindle speed up to 4,500 rpm >> Infinitely variable feed on 3 axes from 0 to 2,000 mm/min >> Rapid traverse X and Y axis: 5,000 mm/min Z axis: 4,000 mm/min >> Travel X/Y/Z: 400/350/400 mm >> Table surface: 650 x 350 mm >> Table load capacity: 250 kg >> Vertical quill stroke: 60 mm >> Vertical and horizontal quill - SK40 >> Hydraulic tool clamping system >> Weight: approx. 1,800 kg >> Space requirement: approx. 2.3 x 2 x 2 m Dkjdpfoxupc Usx Ag Rsg >> Drive power: 15 KVA Accessories and Features: >> Heidenhain TNC 320 contouring control >> Hydraulic clamping for vertical and horizontal axes >> Automatic central lubrication system >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual for the control, and programming examples >> Handwheels >> Coolant system >> Electronic handwheel HR410 About the Machine: Offered here is a Kunzmann WF4/3 tool milling machine equipped with a Heidenhain TNC 320 contouring control. This universal milling machine is in excellent condition, with very few operating hours. Previously used exclusively for training purposes, it features a highly user-friendly control system. The machine offers hydraulic clamping for both vertical and horizontal operation. Conversion from vertical to horizontal milling is extremely easy via the tilting vertical head. Guideways are continuously lubricated via the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. You are welcome to view and test the Kunzmann machine under power at our facility. A total of 7 Kunzmann WF4/3 milling machines with TNC 320 Heidenhain controls are available. The machines are immediately available.