Run press

LVD PPEC-7 135/30

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 55,771 h, laser hours: 35,157 h, laser power: 3,200 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 8 mm, table length: 3,000 mm, table width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 150 mm, positioning speed: 140 m/min, positioning accuracy: 0.02 mm, year of last overhaul: 2024, feed length X-axis: 3,000 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 150 mm, Equipment: cooling unit, documentation/manual, safety light barrier, The laser is in operation, can be inspected and tested. Regularly serviced in good technical condition. Mirrors completely replaced in 2024. Gisdpov Hxbbefx Anxet

Condition: new, Year of construction: 2025, Delivery ex works Turkey Bending length (A): 3050 mm Press force: 170 tons Sheet thickness 42kgf / mm: 8 mm Sheet thickness 72kgf / mm: 4 mm Upper tool: 1260 Top Tool 85 ° Lower tool: 50, 35, 22, 16 Distance between columns (B): 2550 mm Forward speed: 130 mm / s Working speed: 8 mm / s Retraction speed: 120 mm / s Crowning: manual (CNC-motorized available for an extra charge) X-axis travel: 750 mm X-axis speed: 250 mm / s Backgauge fingers: 2 pieces Front support arms: 2 pieces Oil tank capacity: 180 liters Main motor power: 11 kW Stroke length (C): 265 mm Installation height (D): 450 mm Projection stand (E): 410 mm Table height (F): 870 mm Table width (G): 170 mm Length (L): 4200 mm Height (H): 2800 mm Width (W): 2200 mm Weight: approx. 7500 kg Cybelec Cybtouch 12 2D Graphic CNC control 3 axes (Y1, Y2, X) expandable with optional R+Z-Axis Eurostamp 2067 lower tool (V: 50, 35, 22, 16) Eurostamp 1260 upper tool 85 ° Narrow table All-steel welded construction Promecam quick clamping system CNC-controlled motorized backgauge (X: 750 mm) Adjustable backgauge fingers Inch and metric system can be selected Ground and chrome-plated cylinders Swiveling control panel Foot control with anti-panic stop & emergency shutdown Lateral protective grille (secured with limit switch) Light curtain on the back of the machine (900 mm) DSP laser finger protection system at the front (CE) Gedpegu N Alofx Anxsit BOSCH / REXROTH or HOERBIGER / HAWE hydraulic system BOSCH / REXROTH or ECKERLE hydraulic pump Slidable front support arms (2 pieces) Electronics unit from: SIEMENS, SCHNEIDER, DELTA, ABB, OMRON 380 V 50 Hz Painting: RAL 7035, RAL 5015 Optional special accessories available at an additional cost: -CNC-controlled R-axis (250 mm) -CNC motorized crowning -Servo driven motors backgauge system for X + R axis (Mitsubishi) -Painting in special colors on customer request Documentation in German or English CE conformity

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Pressure: 225 t Bending length: 4050 mm Gedpfjyz S Ngsx Anxjit Control: DA 69 TW Oil capacity: 400 l Total power requirement: 17 kW Machine weight approx.: 18,100 kg Dimensions: 5700 x 2610 x 3300 mm

Condition: excellent (used), Clint water chiller, which was cooling tooling for a Multivac thermoformer. Almost new condition. Gjdpoumay Usfx Anxeit

Condition: used, Year of construction: 2023, functionality: fully functional, machine/vehicle number: TET201P3-20 - 2200398601, cooling capacity: 44.2 kW (60.10 HP), type of input current: three-phase, type of cooling: water, overall weight: 998 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 6 bar, temperature: 7 °C, volume flow: 7.53 m³/h, pump pressure: 2.67 bar, total width: 866 mm, total length: 2,250 mm, total height: 2,054 mm, warranty duration: 3 months, input frequency: 50 Hz, Equipment: type plate available, Process chiller / air-cooled water chiller unit, Type: TAEevo Tech 201P3-20 – 44.2 kW Chillers, MTA S.p.A. Chiller, water chiller unit, cooler The TAEevo Tech 201 P3-20 is an air-cooled compact water chiller designed for outdoor installation (from -5°C to +46°C). Includes crankcase heater, phase monitoring, 350-liter buffer tank, and integrated P3 circulation pump. Chilled water outlet temperature adjustable from -10°C to +30°C. Cooling capacity: 44.2 kW Chilled water temperature (outlet/inlet, °C): 7 / 12 Flow rate (m³/h): 7.53 Available pump pressure (bar): 2.67 Ambient temperature (°C): 32 Refrigerant: R 410A Electrical data: Voltage: 400 V, Frequency: 50 Hz, Phases: 3 Max. power consumption: 23.69 kW Max. current: 39.83 A Starting current (circuit): 134.4 A Protection class: IP54 Dimensions: Length (mm): 2250, Width (mm): 866, Height (mm): 2054 Weight (kg): 998 Connection: Rp 2" Serial number: 2200398601 Year of manufacture: 2023 Condition: Visual: 2, Technical: OK (tested) Used Price: on request in euros (plus VAT, ex works Nettetal) Used machines may have visual defects due to use. (Subject to technical modifications and prior sale!) Location: MTA Deutschland GmbH, 41334 Nettetal Godpfx Anexc Ip Njxoit

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, operating hours: 17,446 h, power: 11 kW (14.96 HP), input voltage: 400 V, oil tank capacity: 130 l, total length: 3,300 mm, total width: 2,000 mm, total height: 2,440 mm, overall weight: 8,900 kg, controller manufacturer: DELEM, controller model: DA65, working width: 3,100 mm, bending force (max.): 110 t, control type: CNC control, number of axes: 8, actuation type: hydraulic, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, foot remote control, lower tooling, safety light barrier, upper tooling, For sale: Used press brake DARLEY EHP-L 110 31/25, year of manufacture 2000. The machine is in excellent technical condition and is highly reliable. Very precise and offers repeatable results. In December 2023, all cylinder seals as well as the hydraulic oil and filters were replaced. In February 2024, the upper WILA tool clamping system was serviced. The machine has very few operating hours. Hydraulics: Hoerbiger Machine number: 122067 Machine type: EHP-L 110 31/25 Year of construction: 2000 Maximum pressing force: 1100 kN Working length: 3100 mm Power: 11 kW Voltage: 400 V Hydraulic oil tank capacity: 130 l Hydraulic system pressure: 28 MPa Weight: 8,900 kg Gedpfx Ansx N Ibhsxoit Tooling type: Hydraulic Wila / Trumpf Control: DELEM DA65 Number of axes: Y1, Y2, X1, X2, R1, R2, Z1, Z2 + crowning compensation If you have any questions or would like more information, please send us a message or contact us by phone.

Condition: ready for operation (used), Year of construction: 2018, clamping force: 1,900 kN, screw diameter: 45 mm, total height: 2,190 mm, overall weight: 8,900 kg, This HAITIAN ZHAFIR ZERES ZE1900 was manufactured in 2018. It is an electrical injection moulding machine, ideal for precision and efficiency in plastic processing. Consider the opportunity to buy this HAITIAN ZHAFIR ZERES ZE1900 electrical injection moulding machine. Contact us for more information. Additional equipment • Air valves: 2 Machine Benefits Technical Machine Benefits • Platen size: 840 x 790 mm • Distance between uprights: 570 x 520 mm • Installation height: 200 to 550 mm • Opening width: 470 mm • Max ejector stroke: 130 mm / max ejector bar length: 320 mm • Ejector coupling type: central haitian standard Ø 32mm / m16 • Centering ring: 160 mm / cascade control: 4-fold / core pulls bwap: 2 Gjdpfx Ansx D H Nqsxjit • Hot runner control units: external • Without handling Dimensions Machine Depth 5980 mm

Condition: new, Year of construction: 2026, 150 t 3100 mm Gsdpfx Anewyd Thjxsit 2600 mm 400 mm 200 mm 600 mm

Condition: used, Used CNC press brake from Ermaksan Type: CNC AP 3100 120 Capacity: 3100 x 120 tons Delem DA66w graphical control CNC controlled axes: Y1, Y2, X, R, Z1 and Z2 Crowning system Euro tool clamping with 1 set of tools Gisdpfxoxnp S No Anxjt Year of manufacture: 2006

Condition: new, Year of construction: 2025, functionality: fully functional, pressing force: 150 t, operating speed: 200 mm/s, total length: 3,770 mm, total width: 1,855 mm, total height: 2,540 mm, overall weight: 8,500 kg, working width: 3,100 mm, back gauge: 1,000 mm, distance between stands: 2,600 mm, HACO OPTIFORM 30150 (IN STOCK) HACO OptiForm. Compact, powerful and quickly available. With over 60 years of experience in sheet metal working, HACO introduces the new OptiForm press brake: a compact, high-quality machine built in Europe that combines premium performance with a surprisingly competitive price. Despite its compact size, the machine is built on the basis of the proven technology of the Synchromaster series. Think of the same hydraulic connections and high-quality components – a solid basis for reliability and a long service life. Press brake features: Working length: 3100 mm Capacity: 150 tons Distance between the cheeks: 2600 mm C-frame discharge: 400 mm Daylight opening: 480 mm Table height: 965 mm Rapid travel Y-axis: 200 mm/s Press travel Y-axis: 10 mm/s Return travel Y-axis: 130 mm/s Motor power: 15.0 kW Total length: 3770 mm Total depth: 1855 mm Total height: 2540 mm Weight approx. 8,500 kg The machine is also equipped with: ===== - EASYBEND 2D CNC control - 4-axis back gauge X-R axis travel 1000 Gijdpjwnddvjfx Anxjt - CNC controlled crowning - Equipped with DSP lasersafe finger detection - Fast manual clamping for European Standard tools, intermediate pieces height 150 mm or 100 mm - Movable support arms Delivery + installation at your location is of course possible, delivery costs and additional costs in consultation. We have been the Dutch dealer for HACO press brakes and shears since 2019. In addition to the sale of sheet metal working machines, we offer a total package for service, maintenance and repairs.