Impact shredder / flail shredder

Möller Bünde SZR 1000 / 800

Condition: used, For sale: BRENTA industrial log bandsaw with Progress log carriage Heavy-duty BRENTA industrial log bandsaw (bandsaw / frame) including Progress log carriage, from a professional sawmill. Technical data - log bandsaw Manufacturer: Ateliers de Construction Louis Brenta SPRL (Belgium) Model: ETYELEC Machine serial number: 406341 Motor power: 60 HP (approx. 44 kW) Speed: 340 RPM Bandwheel diameter: Ø 1,400 mm Condition Bandwheels and frame overhauled and ground approx. 1 year ago New bearings on the bandwheels Runs smoothly Progress log carriage Heavy-duty industrial design Mechanical roller conveyor with chain drive Guodpfxsx Ndphj Aa Sea

Condition: used, Year of construction: 2006, Bruks drum chipper Gusdpfx Asxr Trnja Soa Model 820CM Year of manufacture: 2006

Condition: new, functionality: fully functional, Year of construction: 2024, operating hours: 44 h, load capacity: 4,500 kg, lifting height: 17,000 mm, fuel type: diesel, mast type: telescopic, power: 85 kW (115.57 HP), empty load weight: 13,040 kg, drive type: Diesel, Rigid telescopic forklift Mast type: Telescopic Speed class: 20 Condition: New machine Gsdpfx Aow Eqc Hea Ssua Technical condition: New Front tires type: Air Front tires Size: 400/70-24 Front tires Condition: 80 - 100% Rear tires Type: Air Rear tires Size: 400/70-24 Rear tires Condition: 80 - 100% 3rd valve, 4th valve, heating, full cab, CE certificate, Telescopic handler model ICARUS 45.17 GD engine 2PL1107 ----- 1 ICARUS 45.17 DYNAMIC ST.V IT 1 ST ICARUS 45.17 DYNAMIC - GD TÜV/DEKRA approval 20 KM/H (only for Germany) - Automatic 45% locking differential on the second axle Hydraulic single-lever control unit with proportional and simultaneous control (flow-sharing). Open center system Wheel set#400/70-24#Power CL Michelin with mudguards Fixed Dieci equipment carrier plate Boom swing damping (Not compatible with basket pre-equipment) Standard heating Air suspension seat Indicator light correct steering Set car radio preparation Cab comfort kit (sunshade ,rear storage net, dual USB port) Standard rear view mirror right and left FNR lever under the steering wheel - Rear view camera, integrated in the machine's display. LED headlights on boom head Two rear swivel LED work lights on cab LED work lights (1 on the right side, 1 on the left side, 1 at the rear) Road headlights (front) with LED daytime running lights. Rear-view mirror 7-pin trailer socket. Pair of floating forks 120 x 50 mm, L = 1200. 5.0 t load capacity

Year of construction: 2023, condition: ready for operation (used), Two Vecoplan scraper chain conveyors are available. 1) VKU 800, year of construction: 2023, drive power: 5.5kW, belt speed: 24m/min, conveying capacity: approx. 120m³/h, belt width: 820mm, max. incline: 70°, section length: 10.2m. 2) VKU 1100, year of construction: 2023, drive power: 11kW, belt speed: 24m/min, conveying capacity: 180m³/h, belt width: 1150mm, max. incline: 70°, section length: 22mm. Documentation available. On-site inspection is possible. Gjdpfot Iw Rysx Aa Sjua

Condition: new, power: 90 kW (122.37 HP), Year of construction: 2026, A double rotor hammer crusher is a type of crusher in which two rotors are mounted on a single shaft, combined to form a spinning rotor. The double rotor arrangement enhances the crushing capabilities and provides a more efficient and reliable crusher design compared to single rotor crushers. Here are some key features and aspects of a double rotor hammer crusher: 1. Two Rotors: As the name suggests, the crusher has two rotors that rotate in opposite directions on a common shaft. This dual rotor configuration allows for increased impact and crushing power. 2. High Capacity: The dual rotor design enables the crusher to handle larger feed sizes and higher capacity compared to single rotor crushers. It is suitable for crushing materials with high hardness and large sizes. 3. Versatility: Double rotor hammer crushers are versatile and can be used in various applications, including the reduction of limestone, gypsum, coal, and other similar materials in the mining, cement, and building materials industries. 4. Impact Crushing: The primary mechanism of crushing in a double rotor hammer crusher is through the impact of the hammers against the material. The material is fed into the crusher, and the high-speed rotating hammers impact and shatter the particles. 5. Adjustable Gap Settings: These crushers often have adjustable gap settings between the rotors and the impact bars, allowing control over the final particle size. 6. Durability: The robust design of the double rotor hammer crusher makes it durable and capable of handling tough materials and continuous operation. 7. Reduced Wear: The dual rotor arrangement can help distribute wear more evenly across the hammers and other wear parts, potentially extending the overall lifespan of the crusher. Typical Technical Specifications While exact numbers vary by manufacturer, these are the standard ranges for industrial models: Model (Rotor Size),Max Feed Size,Output Size,Capacity (t/h),Total Motor Power 600 × 400,≤110 mm,≤3 mm,10 – 15,18.5+18.5 kW 800 × 600,≤120 mm,≤3 mm,40 – 50,45+45 kW 800 × 800,≤180 mm,≤3 mm,50 – 60,45+55 kW 1000 × 800,≤180 mm,≤3 mm,70 – 80,75+55 kW 1100 × 1000,≤200 mm,≤3 mm,70 – 100,90+110 kW 1400 × 1200,≤200 mm,≤3 mm,90 – 110,132+160 kW For more details about double stage hammer crusher, or double rotor crusher, welcome to leave us a message, our team will get back to you at the earlist. Gedpfxeq Nf Eno Aa Seua

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC Godpfx Aaewp Rqfe Soua The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price:20,000.00 EUR (VAT is not included)

Condition: reconditioned (used), functionality: fully functional, approx. 4.5 m long infeed and centering table Drive via chain from the feed motor Centers the logs in the middle of the rotor Debarking machine VK 26 4 main cutters 4 pre-cutters 30 KW main motor 11 KW feed unit non-driven extraction table Gusdou Hmacspfx Aa Ssa Machine workshop checked Machine cleaned and repainted

Condition: new, Year of construction: 2023, Application combs 10 mm Application combs 15 mm Application combs 20 mm finger joint profile 15 mm Gujdjiacbpspfx Aa Soa finger joint profile 20 mm delivery time 3 days

Year of construction: 1988, condition: repair required (used), mechanisation for planer infeed -For lengths up to ca. 13 m Guedpfevbtpsx Aa Sja -Ideal unit for KVH (solid construction timber)and BSH (laminated beams) in front of the planer -1 operator -lateral destacking unit -separation -4 cross cut saws -cutting cross section 180x220 mm, 150x300 mm

Condition: refurbished (used), Completely refurbished Bongioanni CRL 4 tensioning wagon with clamping blocks. Track gauge 1200 mm. Rails newly milled. Servo-electric drive. Sale upon customer order. Godpfx Aoxtwxboa Seua