Swap body semitrailer

Auflieger Abrollkipper Hakenlift Agrar

Condition: good (used), Year of construction: 1998, machine/vehicle number: 0518018, Offer 24600 Technical data: - suitable for welding steel, aluminum, special metals, Cr Ni, etc. - welding current 450 A 60% ED - 360 A 100% ED - welding current adjustable from 3 A - 450 A - Synergic setting control FRONIUS - water cooling device FRONIUS Hedpfx Ajvncfmodwong - separate wire feed case - intermediate package device - wire feed case 14 linear meters - 4 rollers wire feed continuously adjustable - MIG - MAG hose package water-cooled approx. 4 linear meters - ground cable - pressure reducer - mobile base frame - connection 400 V / 6.6 A / 8.7 kVA - space requirement approx. W 650 x H 900 + 450 x D 1100 mm - weight approx. 200 kg

Condition: good (used), Manufacturer: Takraf / Zemag Hodpfsg Sntyox Adwong Roll Dia.: 1.250mm Roll Width: 2.000mm Electrical Motor: Included Will be overhauled, sandblasted and painted. See PDF-file below for more detailed information.

Condition: good (used), Manufacturer: Takraf / Zemag Hjdpfx Adspxn D Djwong Type: ZWB 630 x 800 Roll Dia.: 630mm Roll Width: 800mm (Smooth) Included frame and electrical motors.

Year of construction: 2017, condition: excellent (used), Stationary piston compressor with 500 L tank Air outlet ¾" Dimensions and weights Length (product) approx. 2020mm Width/depth (product) approx. 570mm Height (product) approx. 1340mm Weight (net) approx. 245kg Electrical data Supply voltage 400V Mains frequency 50Hz Output power 5,5kW input power 6,52kW Noise emission Sound pressure level Lp 83dB(A) Explanation Sound pressure level Sound pressure level at 1 m distance according to DIN 45635 T 13 Compressor Compressor system HOS Suction capacity approx. 950l/min Filling capacity approx. 750l/min Explanation Filling capacity at 6 bar working pressure Number of cylinders 2 Number of compression stages 2 Compressor speed 960min¯¹ Compressed air tank Maximum pressure 10bar Tank capacity 500l Hodelczl Uepfx Adwjng Location: Ex stock 54634 Bitburg - immediately available -

Condition: ready for operation (used), Hazemag Percussion Mill AP 4 complete with Drive unit, Spare rotor + spare parts Hnedpfx Aeuimvyjdwjg Capacity : approximately 150 T/h. Power : 35 to 120 kW Opening : 700 x 1000 mm Weight : about 11000 kg Special offer now € 15,000

Year of construction: 2013, condition: used, We offer you a used PET bottle crusher of the manufacturer BOREMA, type R-1200 F, year of construction 2013, for residual emptying, deaeration and pre-compaction of the fed PET bottles, from 0.3 up to 2.5 l content. The machine has a chassis and can be moved into and out of the feed chute of your baler. The machine has a throughput capacity of approx. 85,000 bottles/h, corresponding to approx. 3t/h. We have the following technical information: Manufacturer: BOREMA Umwelttecjhnik AG Type: R-1200 F (with trolley for retracting and extending) Year of manufacture: 2013 Drive power: 11 kW Hnjdpfju Thpnsx Adwjg Connected load: 15 kW Rated current: 32 A Back-up fuse: 40 A Type of construction: Continuous system Function: Double rotor press system Rotor pretension pneumatic: approx. 16t Overload protection: by anti-blocking system Input material: PET disposable and returnable empty bottles 0.3 to 2.5 L capacity Input material: HDPE bottles and canisters up to 3 l capacity Throughput capacity: approx. 3 t/hour, corresponding to approx. 85,000 bottles/hour, depending on size Required compressed air output: G1/2", 8 bar, 40 l/min. Compression ratio: 1:3 Flange dimensions inside: 972 x 1220 mm Feed opening: 565 x 1280mm Weight: approx. 2500kg Possible applications: Due to the chassis, the PET flattener can be moved into the feed chute of your baler as required, thus ensuring residual emptying, venting and pre-compaction of the fed bottles and canisters. When the material is changed, the PET flattener is simply moved out of the feed chute again and paper, cardboard, film, etc. can now be pressed further without using the flattener. Process of the BOREMA PET crusher: The plastic packages are drawn in by two rotating shafts. One of the rotating shafts is pneumatically pretensioned by two air bellows and presses the PET bottles with 16 t of pressure against the second rotating shaft. In the process, the closed plastic bottle is squeezed together, caused to burst and vented. Residual liquids run out and the material falls into the baler in a precompressed state. When impurities are introduced, the pneumatically pre-tensioned shaft deflects to the side and the impurities are channeled through. Significant advantages compared to conventional PET perforators with punching mandrels or knives: The BOREMA process is much more efficient and less subject to wear than conventional PET perforators with punching mandrels or knives. The biggest advantage is that any foreign matter such as metal parts, stones, bottles with frozen contents and pieces of wood are passed through the pneumatically deflecting rotor shaft without stopping the operation of the system or causing any major damage. With conventional perforators, mandrels or blades sometimes break off or become so jammed with the interfering material that the plant has to be shut down and repaired at great expense. Comments: The crusher is in good condition, was dismantled from the running operation, stored, is available at short notice and after assembly immediately ready for use. The documentation (manual, CE, electrical/hydraulic circuit diagram) is complete. An inspection is possible by arrangement. The technical information is taken from sales brochures, the operating instructions or other information provided by the manufacturer. We accept no liability for incomplete or incorrect data and informations.

Condition: good (used), axle configuration: 3 axles, first registration: 03/2018, suspension: air, color: red, Year of construction: 2018, Axle configuration Make axles: BPW Brakes: disc brakes Hjdpfxoxyy S Do Adwjng Suspension: air suspension Weights Empty weight: 3.540 kg Carrying capacity: 35.460 kg GVW: 39.000 kg Maintenance, history and condition APK (MOT): tested until 03/2026 Technical condition: good Visual appearance: good Additional information Please contact Arie or Pedro for more information ADR : EX II - EX III - FL -AT