Two Rolls (wings) Crusher

Takraf / Zemag 1250 x 2000

Condition: good (used), Year of construction: 2004, functionality: fully functional, Manufacturer: HABERMEHL Anlagenbau GmbH Address: Hauptstr.1, 35510 Butzbach-Ebersgöns, Germany Type: EH 400/1 Serial number: 901 Year of manufacture: 2004 Voltage / Frequency: 400 V / 50 Hz Rated power: 3 kW CE-certified: Yes 🛠️ Device Description Industrial shredder or crusher (Shredder/Granulator). Notable features visible in the photos: - System with rotating knives (shredding unit) on a 2 mm shaft - 3 kW SEW motor and reduction gearbox - 8 mm screen (the screen is labeled “8 mm Sieb”) – determines the output particle size - Rollable, portable design - Material discharge container and lower motor drive system Machines of this type are typically used for shredding the following materials: - Plastics - Rubber - Wood - Light metal chips - Electronic scrap 📝 Technical information you should request Bwjdpfx Aow Niuhsk Hsl If you require further details, you may request the following information from the supplier or manufacturer:

Condition: new, functionality: fully functional, power: 36 kW (48.95 HP), fuel type: diesel, color: yellow, operation weight: 2,450 kg, tire condition: 100 %, Year of construction: 2024, operating hours: 8 h, Operating weight: 2450 kg Front axle load: 1400 kg Rear axle load: 2100 kg Engine manufacturer: 3-cylinder Perkins, emission stage STAGE V Engine power: 36 kW at 2800 rpm Bwsdpfxoyvg N Ro Ak Hsl Hydraulic circuit: for attachments Hydraulic quick coupler: Euro type Trailer hitch: ball / pin Travel speed: 30 km/h, configuration

Condition: excellent (used), Year of construction: 2007, operating hours: 1,154 h, For sale fully functional and ready for further work mini chain excavator so-called Trencher from one of the best companies on the market, which is Vermeer. We have many machines and devices from this manufacturer, we service them on site. We offer all kinds of machines that help in work in gardens, etc. Vermeer RTX100 is ideal for making strips for cables or pipes. Thanks to the saw that is installed, it is possible to dig up to a meter. The last service of the machine was at 1148mth, so relatively recently. Engine: Kohler CHL15 15 HP Single Cylinder Gasoline Capacities Fuel Tank: (6.1 l) Hydraulic Tank: (37.8 l) Hydraulic System: (39.7 l) Engine Oil: (1.13 l) Hydraulic System Pump Type: Tandem Piston Pump Ground Drive gpm @ Max Engine RPM: (20.4 l/min) Implement Pump gpm @ Max Engine RPM: (41.6 l/min) Ground Drive Ground Drive Type: Hydrostatic Maximum Forward Transport Speed @ Full Throttle: (64 m/min) Maximum Reverse Transport Speed @ Full Throttle: (25.9 m/min) Steering Type: VZ Steering Bsdpfewbtytox Ak Hjwl Trench Excavator Boom Length: (91.4 cm) Cutter Width: (15.2 cm) Auger Diameter: (40.6 cm) Auger Outer Bearing Support: Standard Crusher: Optional Safe Strap: Standard Shipping Dimensions: Weight (Basic Tractor with Tires): 910 lbs (412.7 kg) Length (Basic Tractor): 81.4" (206.7 cm) Width (Basic Tractor with Tires): 35" (88.9 cm) Height (Basic Tractor with Tires): 46" (116.8 cm) Wheel Tread from Axle Centerline: 34.2" (86.8 cm) Tread Width (tires): 8.5" (21.5 cm) Track contact length: 19" (48.2 cm) Track width: 7" (17.7 cm) Note! The price is in net value For Export and for companies to deduct VAT, net values apply. For individual customers, a discount is possible - We invite you to contact us directly by phone to get your best price :)

Condition: new, Year of construction: 2026, Consisting of large bale breaker Type MHB and straw shredder Type MHZ 1) Bale Breaker MHB: Special price from €22,975 net (lead time approx. 15 weeks) Bsdpfxsb Nulhe Ak Hewl Suitable for round or square bales. Includes frequency converter (FU) – regulates the speed of the chain conveyor. The bales are placed on the chain conveyor, and the milling advance is activated. The milling tines tear the straw from the bale and hurl it into the hopper. Ideally, the combination of bale breaker and straw shredder is recommended here. Technical data – Bale Breaker: Performance: 1–2 bales per hour Up to max. 600 kg per hour (depending on screen size used in the straw mill and kW rating of the straw mill). Without straw mill, the bale breaker can process up to max. 900 kg/h straw. Max. square bale size: 2400 x 1200 x 800 mm (L x W x H) Milling motor: 5.5 kW, 380 Volt Chain conveyor feed: 0.75 kW, 380 Volt Dimensions: 3750 x 1730 x 2460 mm (L x W x H) Weight: 400 kg 2) Straw Shredder MHZ 600 – 11/15 kW; available immediately Special price from €6,995 net Surcharge for even larger straw shredder (18.5 kW): + €3,940 net Technical data, MHZ with special hopper: Motor: 15 kW, 380 Volt electric motor Diameter: 600 mm Hardened cutting knives Screen with interchangeable inserts; selectable perforations (10, 12, 15, 22, 30, 45 mm) With star-delta switch, phase protection, and 8 m power cable, plug-in ready Discharge nozzle: 160 mm Blowing distance approx. 12 m Dimensions: approx. 1600 x 1020 x 1360 mm (L x W x H) Weight: approx. 240 kg --- Optional extras for a surcharge: Feed auger: + €970 net Cyclone (suspension by customer on site; should be no more than 10 m away): + €2,970 net Simple filter: €1,750 net --- Further options: Industrial extraction system (demonstrator): + from €9,950 net Optional rotary valve (renders material pressureless): + €5,750 net Control panel: from €1,620 net Special breaker extension 3 m (other sizes on request): + €9,750 net Briquetting press MPP 180 S; little used demonstrator 70 mm briquette – up to max. 100 kg/h from €39,700 net * Larger machines available on request --- Description: muetek bale breakers are designed for breaking up round and square bales of hay and straw. The shredder flanged to the bale breaker shreds straw from all types of cereals, hay, maize, and miscanthus. muetek machines of the MHZ / MHB series are characterized by robust construction and heavy-duty build quality. muetek MHB series bale breakers feature a chain conveyor onto which the straw bale can be placed using a front loader. The support surface is adjustable depending on bale type. The chain conveyor pushes the bale against the milling rotor. The feed speed is adjustable. The milling rotor is equipped with several teeth that tear open the straw bale. The separated straw is discharged. --- The machines are generally suitable for dry input material: - Straw - Hay --- Breaking up hemp bales is possible only with a special breaker (surcharge approx. €9,720 net, depending on configuration). Straw mill is not suitable for hemp processing. Requirements for input material: Max. moisture content 12%

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressure: 70 bar, total height: 1,600 mm, total width: 800 mm, total length: 1,200 mm, temperature: 40 °C, operating pressure: 70 bar, noise level: 80 dB, Equipment: documentation/manual, rotational speed infinitely variable, RO 510-DT2-15S – Compact Seawater Reverse Osmosis System, approx. 15,000 L/day Potable Water Compact, fully automated reverse osmosis system for the production of hygienic drinking and process water from natural seawater. Ideal for maritime applications, island supply, hotels, as well as small-scale industrial and utility operations. Technical Specifications Type: RO 510-DT2-15S Process: Reverse osmosis with Disc-Tube (DT) technology Permeate Output: Approx. 15,000 L/day (15 m³/day, depending on operating conditions) Feed Water: Seawater with high conductivity, approx. 55,000 µS/cm (high salinity) Permeate Quality: Drinking water, approx. 500 mg/L residual minerals (reference value) Recovery Rate: Approx. 30% (typical operating range) at 55,000 µS/cm conductivity Design Temperature: Approx. 25°C (Operating range: approx. −2 to 35°C) Process Technology & Configuration DT module with open feed channel – highly fouling-tolerant and fully cleanable Mechanical pre-filtration (high-performance filter + 10 µm cartridge filter) Chemical pre-treatment of feed water (acid dosing) generally not required Integrated rinsing and CIP (clean-in-place) function, PLC controlled Skid-mounted on stainless steel frame (AISI 316) High-pressure lines in stainless steel, low-pressure section in seawater-resistant plastic Pumped seawater components made from corrosion-resistant materials Operating & Energy Data Feed Water Flow: Approx. 1,000 L/h (reference value) RO Module Operating Pressure: High pressure range, designed for seawater desalination Power supply: 230 V, 50 Hz, single phase Connected load: Approx. 6 kW Control, Monitoring & Safety Local operator panel with integrated PLC control Monitoring of pressures, flows, conductivity, and operating hours Automatic shutdown in case of: - Insufficient feed pressure - Exceeding permissible operating pressure - Overpressure in permeate/concentrate lines - Exceeding defined conductivity limits (with automatic redirection to drain) Bwedpew Uf Ihefx Ak Hsl Automatic “Stop & Rinse” function: Permeate flushes all seawater-contacted components on shutdown, reducing fouling during system standby Dimensions & Weight (Skid) L × W × H: Approx. 1,190 × 705 × 1,500 mm Weight: Approx. 530 kg (dry), approx. 605 kg (operating) Typical Applications Vessels, offshore platforms, ports Island and coastal supply Hotels, resorts, small industrial and utility operations Backup or peak load system for existing potable water production Additional technical documentation, photos, and information on scope of supply, pricing, and availability are available on request.

Condition: excellent (used), the plant is consisting of: - 2 chain separators - 2 55 cbm³ silos with discharge screws - 2 discharge screws - 4 mixing and homogenising chambers, - 5 conveyor belts - 2 double-shaft extruders connected in parallel Bwodpfx Akjlxzl Ee Hel - 1 double shaft mixers - container for liquid extracts, etc.

Condition: like new (used), Manufacturer: V. Randwijks Rotor Dia.: 500mm Bwjdpfx Aksg Snt Ss Hel Rotor Width: 700mm Electrical Motor: 22kW / 1.470 RPM

Condition: used, machine/vehicle number: 5063, System: Used decanter / centrifuge Manufacturer: KHD Model: full coat screw centrifuge Type: CP 3-0.1 . No.: 5063 Hoechstzul. Speed: 2950 I/min Inner diameter drum: 530 mm Drum wall thickness: 12.5 mm Drum material: W 2 Gear: internal hydraulic transmission Hydraulic drive: Rotodiff and pump unit (replacement, pumping unit C11 25/HP) Total weight: 2400 kg Buying and renting possible. Bedpsddzm Tsfx Ak Hewl

Condition: excellent (used), Year of construction: 2005, Hot water tank/heat storage tank made of V4A, upright Technical data / dimensions Available quantity: 1 Volume: approx. 164,000 liters Tank type: Storage tank Condition: used Suitable for food: yes Design: upright Diameter inside: approx. 3,900 mm External diameter: approx. 4,200 mm Cylindrical height: approx. 13,000 mm Total height: approx. 17,220 mm Weight: approx. 10,500 kg Specific weight of the medium: 1.0 to/m³ Operating pressure: unpressurized Wall thickness shell / cylinder: approx. 5.3 - 7 mm mm Ground clearance: approx. 1,800 mm Operating temperature: -10°C/+90°C degrees Celsius Material / properties Material inner jacket: V4A (1.4571) Material double jacket: Stainless steel Inner surface: 2B Weld seams ground on the inside Insulation Insulation available Insulation thickness: approx. 100 mm Insulation material: Mineral wool Insulating jacket material: Aluminum Insulating jacket: screwed/riveted Notes: Cone roof cladding: Stainless steel Cylinder cladding: Aluminum trapezoidal sheet Cone cladding: Aluminum smooth sheet Equipment Stand form: foot ring/stand frame Fastening: fixed Top shelf type: Conical base Bottom shelf type: Conical base Bedpfxjqagl Hj Ak Hewl Top floor: 1 x dome DN 200 with insulating cover 1 x flange DN 32 welded in the dome (CIP) 1 x DN 32 dome drainage 1 x DN 50 cable conduit 1 x overflow DN 150 2 x crane eye Jacket: 1 x inlet pipe DN 100 1 x filling pipe DN 100 4 x thermometer sleeve (ø 26 mm) with insulation box 1 x CIP line DN 32 1 x type plate 1 x access door (approx. 2,000 x 1,000 mm) 1 x DN 100 outlet nozzle Underbody: 1 x swivel cone DN 450, ending in smooth flange DN 100 Notes: Otherwise as per pictures and drawing documentation Drawing

Condition: good (used), Manufacturer: Takraf / Zemag Type: ZWB 630 x 800 -1 Roll Dia.: 630mm Roll Width: 800mm Included frame and electrical motors. Bodpfx Akopxn D Ij Hswl