Solid vice 200 x 50 mm

Condition: good (used), Year of construction: 2004, spindle passage 60 mm turning length 280 mm control 840 D Siemens turning speed range - drive spindle 6300 U/min drive capacity - spindle motor 3,3 kW turret 1 Scheibenrevolver no. of tools in turret 1 8 worktool system DIN 69 880 / 25mm x-travel 90 mm z-travel 280 mm feed power 5500 N rapid traverse 24 m/min power capacity - milling spindle 5000 kW turret Schwalbenschwanz no. of tools in turret 2 6 x-travel 81 mm z-travel 80 mm feed power 5500 N rapid traverse X-axis 16 m/min rapid traverse Z-axis 24 m/min weight of the machine ca. 2,5 t dimensions of the machine ca. 6,0 x 2,0 x 2,0 m TThe INDEX ABC machine is a compact lathe for short turned parts made from bar stock. It has an inclined bed design with two independent turrets. The top turret is primarily intended for internal machining and machining, while the lower turret is used for external machining. Predswbvhaspfx Ab Iod The turret arrangement enables collision-safe working and simple programming programming with high tool availability. The large free space in the working area enables a favourable chip fall The work area consists of two turrets: ‘Turret 1’ - Disc turret with 7 radially arranged tool holders Ø 25 mm DIN 69880 and a holder for the reinforced synchronised spindle on the turret station 8. tools with 1’ holders can also be used with an equalising holder can also be used. The turret is prepared for the V-ledge system. - Synchronised spindle for rear end machining, simultaneous parallel machining with main spindle. Ø42 collet chuck or 3-jaw gripper chuck for internal and external clamping and external clamping. Jaw stroke 0.6 mm. Clamping diameter (external) 75 mm. - Back-boring device. Starting from the centre of the working spindle in clockwise direction, 3 stationary back-boring tools are back boring tools are arranged. These are located in the pitch circle of the synchronised spindle. The back machining is carried out simultaneously with the machining on the the working spindle. Two additional tools can also be used, can be equipped with a tool feed drive. ‘Revolver 2’ - Turret with 6 symmetrical dovetail holders and each station with 2 locating holes for cylindrical shank per station. The following tool systems can be used. - stationary tools that can be moved in the Z direction - Driven tools with cylindrical shank Ø25 (can be used in two positions per station) can be used) - including bar loader LM 3200 - + various accessories (various Ø guide half-shells/tool holders) Technical data: - Material bar diameter: (Ø 25 / Ø 36 / Ø 52)- --> round Ø 8 - 25.4 / 8 - 36 / 8 - 52 mm --> square SW Ø 6 - 14 / 6 - 20 / 6 - 20 mm --> hexagon SW Ø 7 - 22 / 7 - 30 / 7 - 41 mm --> octagonal SW Ø 7 - 22 / 7 - 32 / 7 - 40 mm --> bar length max. 3200 mm --> from bars Ø 25 mm, min. 2,500 mm --> up to rods Ø 25 mm, min. 1,500 mm --> bar support = approx. 300 = 6 bars Ø 52 mm Mass (bar loader) = 700 kg

Condition: good (used), Year of construction: 2020, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, CNC control Heidenhain TNC620 4th axis (NC dividing head) electronical handwheel 24-fold automatic tool changer coolant through spindle device chip conveyor exhaustion device Technische Daten / technical details: X-Weg / X-travel 1000 mm Y-Weg / Y-travel 550 mm Z-Weg / Z-travel 550 mm Spindelaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed 10000 UpM /rpm Psdpetqd E Esfx Ab Isrd Tischaufspannfläche / table clamping area 1000x600 mm Werkzeugwechselmagazinplätze / number of tool places in changer 24 Antriebsleistung Spindel 40%ED / drive capacity spindle 40%ED 13,5 kW Gewicht ca. / weight 6000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 2004, Technical data: Main spindle: Max. turning diameter: 33 mm Max. speed: 8000 1/min Drive power: 5.5 kW Drive power at 60% duty cycle: 7.5 kW Slide 1: Slide travel Z1: 320 mm Predpfotzyx Tox Ab Isd Slide travel X1: 50 mm Slide travel Y1: 255 mm Rapid traverse speed: 30 m/min Ball screw diameter: 25 mm Tool holder slide 1: Number of tools stationary with tool shank 16 x 16: 5 pieces Slide 2: Slide travel X2: 165 mm Slide path Z2: 200 mm Rapid traverse speed: 30 m/min Ball screw diameter: 30 mm Tool holder slide 2: Number of stations for turret with integrated spindle: 8 pieces Number of axially driven tools (integrated): 8 pieces Coolant tank, approx.: 400 l Coolant pump, max. output: 80 l/min Dimensions (LxWxH), approx.: 2460 x 1510 x 1750 mm Equipment: - CNC control Fanuc iT - Workpiece unloading system - IEMCA bar loading magazine - 5-pos. tool carrier plate for slide 1 - Electrical interface and software for bar loading magazine - Collet chuck holder for main and pick-up spindle - 2 Double drill holder for rear machining support with cylinder - Pick-up spindle workpiece pusher

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Model: FMV-1700 Year of Manufacture: 1999 Control System: FANUC Number of Tools: 24 Maximum Spindle Speed: 12000 RPM X-Axis Travel: 1700 mm Y-Axis Travel: 750 mm Prsdpfen D Ifisx Ab Ijd Z-Axis Travel: 700 mm Other Specifications: BT50 Movement System for Each Axis: Box Machine Weight: 9000 kg With fourth axis

Condition: excellent (used), Perfectly preserved six-spindle INDEX MS 25 automatic lathe with six transverse and six longitudinal tool guides. The price is negotiable depending on the selected additional equipment: clamping pods, tools, chip conveyor, etc. The machine is still in production. Viewing possible by arrangement. Prjdpfx Abjqhkuke Ijd

Condition: used, Year of construction: 1991, Mazak SQT 10MS lathe for sale. The machine is fully functional and in good condition. Technical specifications: Max. turning diameter 230 mm Main spindle Speed range 35-6,000 rpm Main drive power 11 kW Secondary spindle Drive power 5.5 kW Speed range 180 - 6,000 rpm Indexing 72 positions/5 ° Tool turret Number of tool positions 12 Driven tools Speed range 120-3,000 rpm Predpfx Abjv Tbu Do Ied Drive power 2.2 kW Travel paths X-axis 160 mm Z-axis 455 mm B-axis 460 mm Travel speed Feed range X/Z-axis 0 - 5,000 mm/min C-axis 1 - 2,000 °/min Machine data (with standard equipment) Total connected load 43 kVA Machine weight, . 3,500 kg Machine dimensions (L x W x H), approx. 2.70 x 1.70 x 1.85 m Accessories Tool presetter (MAZAK Tool Eye System) C-axis Dual foot switch for opening/closing the chuck Chuck status feedback (open/closed) Front door lock Complete coolant system Work area lighting Documentation

Condition: excellent (used), Year of construction: 1999, Fanuc 21T control system Turning diameter 158 mm Swing over bed 340 mm Speed 6,000 rpm 8-station turret Tailstock 3-jaw chuck, 2-jaw chuck, collet chuck Collets Various tool holders Podpfxjwmzhpe Ab Iord

Condition: reconditioned (used), travel distance X-axis: 10,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,100 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 6,000 rpm, spindle speed (min.): 36 rpm, rotational speed (max.): 6,000 rpm, tank capacity: 1,200 l, SHW Powerspeed 5 Travel paths • X-axis (bed): 10,000 mm • Y-axis (headstock): 1,300 mm • Z-axis (vertical): 2,100 mm Control • CNC control: Heidenhain iTNC 530 Feed rate • X, Y and Z axes: 30,000 mm/min • Acceleration: 3.5 m/s² Universal milling head in orthogonal design • Milling head holder swivel range: 360 x 1 degree • Milling head swivel range: 180 x 1 degree • Tool holder: SK 50 DIN 69871 • Speed range: 36 - 6,000 rpm Chip conveyor • Feed length: 10,000 mm Coolant system • Container capacity: 1,200 Liter ATTENTION the images are comparison images About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is on tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control system modernizations. Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control system modernization _____ Prjdpfx Absv Dhw Tj Ijd Used machine - used milling machine - used traveling column milling machine - orthogonal milling head - metalworking - tool milling machine - milling head - SHW machine - SHW spare parts - used milling machine - used milling machine - used CNC milling machine - used drilling and milling machine - used metal milling machine - used metal milling machine - used metal milling machine - used CNC milling machine - CNC milling machines - CNC milling machines - milling machine - large part machining - large part machining - large part machining - CNC large part machining - milling - shw - PS5 - PS 5 - Powerspeed - SHW PSZ 5 - SHW Powerspeed - SHW Powerspeed 5 - PSZ 5 - PSZ 5 - Heidenhain - MBM milling machine - MBM machine - column milling machine

Condition: good (used), Year of construction: 1989, operating hours: 64,136 h, Center height 350 mm Turning length 1000 mm Max. swing diameter over bed track cover 600 mm Max. swing diameter over cross slide 360 mm Spindle bore 107 mm Speed range 16 – 3150 rpm Feed range longitudinal and face 0.5 – 5000 mm/min Rapid traverse longitudinal + face 9 m/min Main drive 30 kW Dimensions of the machine with chip conveyor L x W x H 5400 x 2200 x 2000 mm Weight 6400 kg Accessories / Special features: • CNC control GILDEMEISTER EPL 2 General description: CNC manual input control with programming input via function and numeric keypad. All information is entered in dialogue with the screen. Integrated menu technology and display of all functions in plain text. Control keyboard, screen and handwheel in a separate chip protection hood. The EPL control offers the following options: Programs can be entered and changed manually with direct operator guidance via the EPL control without any programming preparation. NC programs can be entered in ISO/EIA standard via the RS 232 serial interface, output or entered directly by hand. Processing cycles: Roughing cycles for longitudinal, face and contour turning, also with allowance. Thread. Undercuts DIN 509 form E and F and DIN 76, grinding allowance can also be programmed. Axial and radial recesses according to DIN 471 and 472, also with base finishing. Radii 90° and chamfers 45°. Automatic cutting radius compensation for cycles, undercut, recess, radius, chamfer. Programming: Set-oriented, metric/inch, diameter with absolute input, radius with incremental input, full circle programming, sub-program technology, masking levels for program parts. Zero point shift. Operating mode selection via menu. Program input and output: Predpfxsvr Eh Ee Ab Isd In dialog via menu with operator guidance or directly in dialog • Hydraulic 3-jaw chuck • Hinged chip conveyor • 12-way tool disk turret, 6 of which are driven tool holders • Electronic handwheel • Coolant system • RS 232 interface • Electric foot switch for 3-jaw chuck and tailstock quill • Lighting • Various tool holders Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: new, Year of construction: 2024, travel distance X-axis: 4,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,200 mm, 5-axis gantry machining center EDEL CYPORT CP 4030 Travels X/Y/Z: 4,000 / 3,000 / 1,200 mm Gantry passage Y/Z: 3.276 / 1.405 mm Rapid Traverse X/Y/Z 30/30/15 m/min 2-axis-NC-swivel head M-Series of German manufacturer Cytec: Swivel range A-axis : +/-110° Swivel range C-axis +/- 360° Powerful milling spindle of German manufacturer Cytec: Tool taper: HSK-A63 Speed: 12,000 rpm Power: 34/43 kW (100%/40% ED) Torque: 170/220 Nm (100%/40% ED) Control: HEIDENHAIN TNC 640 HEIDENHAIN wireless electronic hand wheel incl. charging station 5-axis path control DXF-converter CAD-Viewer KinematicsOPT Energy efficiency certificate Remote Service Tool magazine: Number of pockets: 64 pcs. HSK-A63 max. tool diameter: 105/150 mm max. tool length: 300 mm max. tool weight: 8 kg Coolant system Manufacturer: KNOLL Tank volume: 1,600 L external coolant supply: 20 bar internal coolant supply: 50 bar Paper band filter Spray gun Chip conveyor Coolant-airblast-changeover Oil-Mist extration unit Work piece measuring, Touch probe BLUM TC 60 - radio controlled Tool measuring BLUM LaserControl Micro Single NT Working area coverage Safety light sensors Documentation CE-certification Prsdpjir Iczjfx Ab Ied Made in Germany