Bezel

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 25-210182, load capacity: 12 kg, repeat accuracy: 0.08 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 12 kg Repeatability: ± 0.08 mm Power consumption: 1.5 kVA Working range, main axes S-axis (rotation): -170° to +170° L-axis (forearm): -90° to +155° U-axis (upper arm): -175° to +240° Working range, wrist axes R-axis (wrist rotation): -180° to +180° B-axis (wrist swivel/flexion): -135° to +135° T-axis (wrist rotation): -360° to +360° MACHINE DETAILS Controller Type: FS100 Dimensions (H x W x D): 470 x 200 x 420 mm Cooling system: Indirect cooling Interfaces: USB 2.0, RS-232C, LAN (100 Base-TX / 10 Base-T) Dimensions Dimensions (L x W x H): 2,500 x 2,000 x 2,373 mm Cjdpfxez Ephie Af Aohc Footprint: 5,000 x 3,000 mm Operating voltage: 3 x 400 V, 50 Hz Control voltage: 24 V DC Power consumption: max. 1.5 kVA EQUIPMENT Drawer module Transfer and centering module Interchangeable 2-point double gripper, standard

Condition: new, Type DTL-20A Brush roll height 200 mm Brush roll diameter 300 mm Roller speed: frequency control Chsdpfsd Tqtyox Af Aoc Electric up and down Power 0.75 kW Transport dimensions 860x750x1100 mm Weight 140 kg Price for spare sanding strip (brushes with sanding paper) 3,6 € + VAT / 1 m

Condition: used, machine/vehicle number: H2X387V04017, Year of construction: 2019, operating hours: 12,114 h, load capacity: 2,500 kg, lifting height: 6,430 mm, mast type: triplex, fork length: 1,200 mm, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 6,430 mm Load capacity: 2,500 kg Fork length: 1,200 mm MACHINE DETAILS Mast type: Triplex mast with full free lift Drive type: Electric Battery type: Lithium-ion battery Battery year of manufacture: Battery voltage: 90 V Battery capacity: 268 Ah Measured idle voltage: 97.8 V Service valid until: 09/2027 Safety inspection valid until: 09/2027 Chjdez Dfpyspfx Af Asc Dimensions & Weight Dimensions (L x W x H): 3,700 x 1,150 x 2,824 mm Dead weight: 5,200 kg Operating hours according to display: 12,114 h EQUIPMENT Former Linde full-service unit Hydraulically adjustable forks Side shifter Free lift 3rd and 4th valve Facelift model with tilt angle indicator Full cabin Radio Heater Windshield wiper Comfort seat White, non-marking tires LED work light, front LED work light, rear Road traffic lighting with turn signals for road approval Orange warning light Safety Light, front Safety Light, rear Rearview camera All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 237

Condition: new, Year of construction: 2018, functionality: fully functional, turning length: 3,060 mm, turning diameter: 494 mm, spindle speed (max.): 2,000 rpm, overall weight: 17,500 kg, controller model: Fanuc 0i-TD, An unused CNC lathe is for sale! TECHNICAL DETAILS Maximum turning diameter: 800 mm Turning diameter: 494 mm Maximum turning length: 3,060 mm Spindle speed max.: 2,000 rpm Bar capacity: 115 mm X-axis travel: 300 + 20 mm Z-axis travel: 3,100 mm Chuck: 15″ Spindle nose: A2-11 Tool stations: 12 Boring bar diameter: 50 mm Rapid traverse X-axis: 15 m/min Rapid traverse Z-axis: 20 m/min Tailstock diameter: 110 mm Tailstock taper: MK 5 Incline: 45° MACHINE DETAILS Chedpfx Aez Ar Rkef Aec Control model: FANUC 0i-T C-axis: Duplomatic VDI60 Spindle motor power: 30 kW Motor power X-axis: 4 kW Motor power Z-axis: 7 kW Electrical connection: 55 kVA Dimensions & Weight Dimensions (L x W x H): 6,500 x 2,120 x 2,310 mm Machine weight: approx. 17,500 kg EQUIPMENT Linear scale on the X-axis Hydraulic steady rest SMW SLUB-5 D50-D310 Tool presetter Renishaw HPMA Warning light Chip conveyor High-pressure pump (10 bar)

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston, tilting cylinder, lifting cylinder -Hydraulic cylinder: double-acting with valve block -Type: unfortunately no type designation -Stroke: 450 mm -Piston rod: Ø 50 mm -Hole diameter: 35 mm / Hole spacing: 620 mm Cjdpfx Aovumd Hjf Ashc -Dimensions: 690/245/H180 mm -Weight: 40 kg

Condition: new, Year of construction: 2024, functionality: fully functional, operating hours: 10 h, cutting height (max.): 510 mm, cutting width (max.): 510 mm, rotational speed (max.): 80 rpm, rotational speed (min.): 20 rpm, controller model: Siemens SIMATIC S7-1200, For sale is a brand new, unused semi-automatic band saw! The machine is sold with a six-month warranty! TECHNICAL DETAILS Cutting height: 510 mm Cutting width: 510 mm Speed range: 20 – 80 RPM Speed infinitely adjustable Band saw width: 54 mm Band saw thickness: 1.6 mm Swivel range: 90 ° Table height: 810 mm Codpfxsz Aq Nfs Af Ashc MACHINE DETAILS Control model: Siemens SIMATIC S7-1200 Control type: PLC-controlled Operating mode: semi-automatic Main drive power: 7.5 kW Power: 10.20 hp Hydraulic feed Planetary gearbox Input voltage: 400 V Input frequency: 50 Hz Input current type: Three-phase Dimensions & Weight Dimensions (L x W x H): 1,200 x 3,200 x 3,000 mm Total weight: 4,500 kg EQUIPMENT Heavy-duty double-column construction CE marking Documentation / Manual Lighting Motor brake Further technical data and information can be found in the attached documents.

Condition: new, Year of construction: 2024, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! The system was purchased in 2024 and has not yet been put into operation due to an order backlog! The new price of the system was €672,000 plus VAT! According to the documentation, the system’s production started in 2023. The final assembly took place in 2026. Chodpfx Afoz Agwfj Asc The video is an example video. It does not show the actual system that is for sale! The system has the following configuration: TECHNICAL DETAILS Storage type: Single-deep storage, double-deep Total capacity: approx. 4,540 containers Permissible container weight: 30 kg per container Block on the picking side Rows: 46 Levels: 25 Storage locations for 120 mm boxes: 1,974 Storage locations for 170 mm boxes: 276 Block on the back of the storage Rows: 46 Levels: 25 Storage locations for 120 mm boxes: 2,020 Storage locations for 170 mm boxes: 276 Rack and pinion stacker crane Type: AP 31 including double-deep feed table Direction of movement: Horizontal Acceleration: max. 3.5 m/s² Speed: max. 3.5 m/s Box feed Pneumatic lowering for containers: 1 piece Roller conveyor technology: approx. 4.5 m Pneumatic stopper, side: 1 piece Drive: 1 piece Electric drive with inverter: 1 piece Pneumatic drive: 2 pieces Emergency stop button: 1 piece Box storage Pneumatic lowering for containers: 1 piece Roller conveyor technology: approx. 4.5 m RollerDrive element: 1 piece Pneumatic stopper, side: 1 piece Drive: 1 piece Control of the RollerDrive element: 1 piece Electric drive with inverter: 1 piece Pneumatic drive: 2 pieces Express retrieval Gravity roller track: 1.3 m Substructure for storage stiffening: 2 pieces Special feed RollerDrive element: 1 piece Substructure for storage stiffening: 2 pieces Control of the RollerDrive element: 1 piece Pick by Light workstation RollerDrive element: 1 piece Projector: 1 piece Superstructure for storage stiffening: 1 piece Control of the RollerDrive element: 1 piece Projector control: 1 piece Further technical details can be found in the attached offer.

Condition: good (used), Reamer, twist drill, drill bit -Manufacturer: Werkö, twist drill Ø 66.0 mm -Recording: MK5 -Type: Two-cutter 66.0 x 630 HSS Chodsu Tlhijpfx Af Aec -on request: different sizes/quantities available from additional stock -Transport dimensions: Ø 66 x 780 mm -Weight: 10.6 kg

Condition: like new (used), Year of construction: 2021, functionality: fully functional, spindle bore: 40 mm, turning diameter over bed slide: 330 mm, center width: 635 mm, spindle speed (max.): 2,500 rpm, overall weight: 700 kg, TECHNICAL DETAILS Center distance: 635 mm Swinging diameter over bed: 330 mm Swinging diameter over cross slide: 210 mm Swinging diameter in the gap: 480 mm Toolmaker's accuracy: DIN 8605 Main spindle bore: 40 mm Spindle mount: DIN 55029 D1-4 Speed steps: 12 Speed range: 40–2,500 rpm Taper in tailstock: MK 3 Chodpfx Afszz Rm Ij Asc Tailstock quill travel: 110 mm Longitudinal feeds: 0.03–2 mm/rev Cross feeds: 0.015–1 mm/rev Metric threads: 0.2–14 mm Whitworth threads: 2–56 threads per 1" MACHINE DETAILS Drive power: 2.2 kW Dimensions & Weight Dimensions (L × W × H): 1,700 × 1,000 × 1,400 mm Weight approx.: 700 kg EQUIPMENT 2-axis digital read-out ACU-RITE® DRO 203 Quick-change tool holder MULTIFIX Chip collection tray with front opening flap Adjustable tool holder guard Rear splash and chip guard Chuck guard Spindle cover Removable bridge Coolant system Work area lighting Threading dial Foot brake with brake pedal over the entire length Operating manual with CE declaration of conformity

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 2,300 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! Chedpfx Afjz Epg Ee Asc TECHNICAL DETAILS Travel range, X-axis: 2,300 mm Travel range, Y-axis: 800 mm Travel range, Z-axis: 600 mm Work area, fixed table Work area, X-axis: 925 mm Work area, Y-axis: 800 mm Work area, Z-axis: 600 mm Clamping area: 1,400 × 750 mm Work area, rotary table Work area, X-axis: 780 mm Work area, Y-axis: 800 mm Work area, Z-axis: 600 mm Clamping area: 800 × 630 mm Tool holder: SK 40 Tool magazine: 30 positions Spindle speed: 50–12,000 rpm MACHINE DETAILS Control system: Heidenhain iTNC 530 Spindle: Kessler motor spindle EQUIPMENT 6th axis prepared Handheld control unit Internal cooling system with filter system Filter system: 500 l Chip conveyor Blum laser 2 extraction systems Machine hood

Year of construction: 1986, condition: good (used), Radial fan, high-pressure radial fan, dust extraction blower, exhaust gas extraction, welding fume extraction, extraction, extraction blower, fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower -Manufacturer: Rippert, radial fan, extraction blower -Type: HL8-560-A -Volume flow rate: 22800 m³/h -Total pressure: 4200 Pa -Motor: Schorch 37 kW 1470 rpm Cjdpfx Ajz Ehd Aof Ajhc -Inlet connection: Ø 560 mm -Outlet connection: Ø 560 mm -Fan wheel: Ø 940 x 200 mm -Protection class: IP 54 -Dimensions: 2830/1230/H1700 mm -Weight: 950 kg

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 1,660 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: M+ Mazatrol, table load: 1,000 kg, TECHNICAL DETAILS Travel in the X-axis: 1,660 mm Travel in the Y-axis: 510 mm Travel in the Z-axis: 510 mm Table dimensions: 2,000 × 510 mm Chsdpsz Ahw Hefx Af Asc Table load capacity: max. 1,000 kg Spindle speed: 7,000 rpm Tool holder: SK 40 Tool magazine: 48 tools MACHINE DETAILS Control system: M+ Mazatrol Machine weight approx.: 7,500 kg Space requirement approx.: 5 m² EQUIPMENT Chip conveyor: MAYFRAN 4th axis: Tilting rotary table: Rotamatik RM 100

Condition: refurbished (used), Year of construction: 2005, laser type: CO₂ laser, laser power: 100 W, working length: 1,330 mm, working width: 1,630 mm, TECHNICAL DETAILS Working area (L × W): 1,330 × 1,630 mm Laser power: 100 W Laser source: CO₂ Maximum material width: 1,575 mm Material pass-through: 15–50 mm (without material support) Speed: 1 – 1,414 mm/s Maximum acceleration: 14.1 m/s² MACHINE DETAILS Suitable for: Films, acrylic, wood, and textiles Dimensions (L × W × H): 2,730 × 2,450 × 1,590 mm Csdpfx Asz D E Ddef Aehc EQUIPMENT i-cut Production Console software package

Condition: used, Year of construction: 2023, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! For sale is a complete digital printing setup, consisting of three components, which are as follows: - Aeoon Compact Series – Digital textile printer - Aeoon PTB – Pre-treatment unit - Sanco CB160T – Tunnel dryer TECHNICAL DETAILS Csdpfx Ajz Duiijf Ashc Aeoon Compact Series – Digital textile printer Manufacturer: Aeoon Technologies GmbH Model: Compact Series Serial number: 20082560 AHP Year of manufacture: 2023 Weight: 1,900 kg Voltage: 3×400 VAC + N + PE Power consumption: 10.6 kVA Frequency: 50/60 Hz Country of manufacture: Austria Compliance: CE Aeoon PTB – Pre-treatment unit Manufacturer: Aeoon Technologies GmbH Model: PTB (Pre-Treatment Unit) Serial number: 30082530 Year of manufacture: 2020 Weight: 250 kg Voltage: 1×220 V + N + PE Power consumption: 0.9 kVA Frequency: 50/60 Hz Country of manufacture: Austria Compliance: CE Sanco CB160T – Tunnel dryer Manufacturer: Sanco Technology Ltd Model / Machine Type: CB160T Serial number: CB160T-210-4-120-E-0358 Year of manufacture: June 2020 Weight: 3,000 kg Voltage: 3×400 V, 3-phase + N + PE Current consumption: 100 A Frequency: 50/60 Hz Operating principle: purely electric Country of manufacture: United Kingdom Compliance: CE