Tilthoist

Condition: used, Year of construction: 2020, power: 6 kW (8.16 HP), workpiece height (max.): 50 mm, edge thickness (max.): 3 mm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! The pick-up deadlines specified in the General Terms and Conditions apply. The absolute latest pick-up deadline is August 31, 2026! TECHNICAL DETAILS Plate thickness min.: 8 mm Plate thickness max.: 50 mm Edge thickness min.: 0.3 mm Edge thickness max.: 3 mm Adhesive system: EVA hot melt adhesive The machine consists of 4 processing units as follows: Unit 1 Pre-milling unit Number of pressure rollers: 3 Adhesive pot for EVA hot melt adhesive Unit 2 Edge processing unit: Capping Dusdpezf Ircjfx Agmjw Number of motors: 1 Unit 3 Edge processing unit: Fine milling for flush trimming and rounding Number of motors: 2 Unit 4 Processing unit: Glue application blade MACHINE DETAILS Total installed power: 6 kW The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before pick-up and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8571

Condition: used, Year of construction: 1993, Technical details: mould plates - length / width: 500 x 400 mm Heating: Zweistufen Heizung 4,6 und 6,0 kW control: SPS voltage: 380 V (3x 20A) / 24 DC V Duodpfx Agou Nu Hijmsw work height adjustable: 870 - 970 mm total power requirement: 6 + 2,5 kW dimension machine xH: 2,8 x 1,1 x 1,3 m weight: 570 kg Compact angle welding machine with shrink tunnel PACKAGING MACHINE WITH SHRINK TUNNEL AND COOLING STATION AND SPECIAL COOLING FAN movable/mobile Application areas/products: -div. brochures, plans or other made of paper/cardboard in DIN A 5 / DIN A 6 Applicable films: all half tube shrink films up to 0,060mm Welding system = impulse welding, with teflonized separation seam, adjustable automatic transport of goods into the shrink tunnel further details: -Tunnel passage width: 450mm -Tunnel passage height adjustable to 100, 200, 300 and 400mm -length of the heatable tunnel hood 900mm -Prod. output of the machine depends on product and film 5 to 20 cycles / minute (manufacturer's data) -max. film width (folded half tube) 550 / 550mm at 25 - 50 my -frame dimension 500 x 500 x 290 mm = max. Verpackungsmaß Heating: -two stage heating 4,6 and 6,0 kW -Fan infinitely variable Cooling station: -outlet 300mm -with blower Conveyor belt: -feed rate 2.5 - 12 m/min -steplessly adjustable i.d. *

Condition: used, Year of construction: 2014, power: 12 kW (16.32 HP), edge thickness (max.): 8 mm, feed rate X-axis: 10 m/min, plate height: 40 mm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! The pick-up deadlines specified in the general terms and conditions apply. The absolute latest pick-up date is August 31, 2026! TECHNICAL DETAILS Feed rate max.: 10 m/min Workpiece height max.: 40 mm Workpiece length min.: 200 mm Workpiece width min.: 80 mm Edge thickness min.: 0.3 mm Edge thickness max.: 8 mm Number of processing units: 5 Number of panel dividing/milling units: 1 Number of edge processing units: 4 Adhesive system: EVA hot melt adhesive The machine consists of the following processing units: Dsdozf Id Sspfx Agmjuw Panel dividing/milling unit Unit: Pre-milling unit Edge processing unit 1 Processing unit: Capping Number of motors: 1 Edge processing unit 2 Processing unit: Fine milling for flush trimming and rounding Number of motors: 2 Edge processing unit 3 Processing unit: Corner rounding Number of motors: 1 Edge processing unit 4 Processing unit: Glue application blade MACHINE DETAILS Total installed power: 12 kW EQUIPMENT CE marking Overpressure Pressure with idler rollers Panel support guides Edge roller magazine Adhesive pot for EVA hot melt adhesive Infeed roller for pressing the edge 4 pressure rollers Corner rounding unit The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents, which are of a descriptive nature. The buyer has the right to inspect the goods before pick-up and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8570

Condition: used, Year of construction: 2014, power: 75 kW (101.97 HP), controller model: BECKHOFF CONTROL, The pick-up deadlines stipulated in the General Terms and Conditions apply. The absolute latest pick-up date is August 31, 2026! TECHNICAL DETAILS Number of upper units: 4 With positioning via NC: yes Lateral horizontal groups: yes Upper vertical units: yes Horizontal units: yes Number of upper vertical units: 4 With positioning via NC: yes Dedezf Ibwopfx Agmjuw With "Z"-axis positioning via NC: yes Spindles for vertical drilling: 112 Number of lateral horizontal units: 4 With positioning via NC: yes With "Z"-axis positioning via NC: yes Spindles for horizontal drilling: 12 MACHINE DETAILS Control: BECKHOFF CONTROL Total installed power: 75 kW EQUIPMENT Protective grid attached to the machine Safety light barriers Automatic waste disposal system The machine will be sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before pick-up and assumes responsibility for the installation, securing, and use of the machine at the destination. External Reference: 8649

Condition: refurbished (used), Year of construction: 2024, functionality: fully functional, 1 overhauled splinter separator Paul, 2-lamella, fixed lamella on the right, movable lamella on the left (for left-hand machine) Duedpfx Agstx A Sxsmow Total length: 5.50 m Total width: 850 mm Roller spacing: 500 mm Roller width: 790 mm for max. timber length: 5.00 m 8 driven spiral rollers and 3 driven smooth rollers. 11 rollers removed and fitted with new ball bearings Movable slat mounted on 4 ball-bearing supports for easy movement with new roller chain and 11 new idler wheels. Sturdy sheet metal lining between all rollers as good as new condition

Condition: used, Year of construction: 2012, power: 20 kW (27.19 HP), working width: 1,300 mm, number of spindles: 82, plate height: 90 mm, working length: 3,000 mm, The pick-up deadlines specified in the General Terms and Conditions apply. The absolute latest pick-up date is August 31, 2026! TECHNICAL DETAILS Working area, X-axis: 3,000 mm Working area, Y-axis: 1,300 mm Maximum panel thickness: 90 mm Total number of drilling spindles: 82 Drilling units, Unit 1 (top) Spindles for vertical drilling: 31 Spindles for horizontal drilling in the X direction: 8 Spindles for horizontal drilling in the Y direction: 2 Drilling units, Unit 2 (bottom) Spindles for vertical drilling: 31 Spindles for horizontal drilling in the X direction: 8 Spindles for horizontal drilling in the Y direction: 2 Milling spindles Number of milling spindles: 2 Milling spindles, Unit 1 (top) Number of controlled axes: 3 Motor power: 4.5 kW Milling spindles, Unit 2 (bottom) Number of controlled axes: 3 Motor power: 4.5 kW Grooving units Number of grooving units: 2 Grooving units, Unit 1 (top) Unit: Fixed for creating channels in the X direction Max. tool diameter: 160 mm Motor power: 3.5 kW Grooving units, Unit 2 (bottom) Unit: Fixed for creating channels in the X direction Max. tool diameter: 160 mm Motor power: 3.5 kW MACHINE DETAILS Total installed power: 20 kW Machine programming software: BIESSEWORKS EQUIPMENT Automatic panel stacking system with motorized transfer Barcode scanner (manufacturer: SICK) Dedpfjzf Ibdsx Agmeuw CE marking Protective grating Safety mats The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents with a descriptive nature. The buyer has the right to inspect the goods before pick-up and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8565

Condition: used, Year of construction: 2011, cutting height (max.): 430 mm, No minimum price – guaranteed sale to the highest bidder! The pick-up deadlines stipulated in the General Terms and Conditions apply. The absolute latest pick-up deadline is August 31, 2026! TECHNICAL DETAILS Dsdpjzf H Szefx Agmjuw Max. cutting height: 430 mm EQUIPMENT CE marking 1 saw blade unit (tilting) The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before pick-up and assumes responsibility for the installation, securing, and use of the machine at its destination. External Reference: 8580

Condition: excellent (used), Year of construction: 1999, 1. Block conveyor 2. Transverse conveyor 3. Linck FWK quick-release carriage Track gauge: 900 mm Travel speed (forward/reverse): 80/180 m/min Clamp opening: 750 mm Log length: 2.5–13.5 m Dujdpfoxtwwkex Agmsw 4. Sawing unit Linck KCSU-6 Round timber diameter: 120–650 mm Drive per side: 160 kW Max. cutting height (triple): 405 mm Residual: 370 mm Log length: 2.5–13.5 m Max. feed-through width: 750 mm Cutting width min/max: 18–720 mm Split wedge opening: 560 mm Saw blade diameter: 620 mm Edger distance: 370 mm Net weight approx.: 15,000 kg Stepless feed rate adjustment: 10–35 m/min 3. Timber removal device BM 1/MBH 4. Edger cross-cut saw Linck KA 1/ACF 5. Complete hydraulic system 6. Complete electrical/control system 7. Complete circulating conveyor technology 8. Discharge mechanisation 9. Waste removal underneath KCSU Year of manufacture: 1998. Commissioned in 2000 Various tools Sale according to customer order.

Condition: used, Year of construction: 2012, power: 5.9 kW (8.02 HP), rotational speed (max.): 9,000 rpm, No minimum price – guaranteed sale to the highest bidder! The pick-up deadlines stipulated in the General Terms and Conditions apply. The absolute latest pick-up deadline is August 31, 2026! TECHNICAL DETAILS Speed: 9,000 rpm Working spindle length: 100 mm MACHINE DETAILS Motor power: 5.9 kW Total connected power: 5.9 kW EQUIPMENT Dodpfjzf H R Rsx Agmeuw Number of milling units: 1 Tilting spindle The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and is responsible for the installation, securing, and use of the machine at the destination. External reference: 8579

Condition: used, Year of construction: 2013, power: 5.9 kW (8.02 HP), No minimum price – guaranteed sale to the highest bidder! The pick-up deadlines specified in the terms and conditions apply. The absolute latest pick-up date is August 31, 2026! TECHNICAL DETAILS Dodpfx Agjzf H Nysmjuw Working spindle length: 100 mm MACHINE DETAILS Motor power: 5.9 kW Total connected load: 5.9 kW EQUIPMENT Tilting spindle Number of milling heads: 1 The machine is sold and delivered in its current and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents with a descriptive nature. The buyer has the right to inspect the goods before pick-up and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8578

Condition: used, Year of construction: 2012, operating hours: 926 h, total height: 1,800 mm, total length: 11,250 mm, total width: 900 mm, Colour: Grey Weight: 1.500 kg Price: On request - Year: 2012 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 546324 - Operating hours: 926 - Main motor power [kW]: 7.5 - Max. saw length [mm]: 7209 - Max. saw width [mm]: 300 - Max. saw blade diameter [mm]: 500 - Arbor saw blade diameter [mm]: 85 - Input table length [mm]: 7850 - Output table length [mm]: 2400 - Options: Automatic pusher system - Voltage [V]: 400 - Current consumption [A]: 22 - Fuse [A]: 25 - Power [kW]: 11.0 - Transport dimensions: 11250mm x 900mm x 1800mm (l x w x h) - Transport weight [kg]: 1500kg Dodoyna Ezjpfx Agmsuw Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2014, feed rate X-axis: 140 m/min, plate length: 3,800 mm, plate width: 2,200 mm, table length: 3,800 mm, table width: 2,200 mm, The pick-up deadlines stipulated in the general terms and conditions apply. The absolute latest pick-up date is August 31, 2026! TECHNICAL DETAILS Plate width max.: 2,200 mm Plate length max.: 3,800 mm Cutting depth main saw: 123 mm Dodozf H Nmopfx Agmjuw Number of grippers: 7 Feed rate max.: 140 m/min MACHINE DETAILS Motor power main saw: 18.5 kW Motor power scoring unit: 2.2 kW Total connected power: 31 kW Control system: WINDOWS 10 Machine programming software: OSI Barcode label printer: ZEBRA ZT230 EQUIPMENT Lift table Pre-loading roller table Front support tables Saw carriage Scoring unit Grippers on the sliding fence The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8546

Condition: used, Year of construction: 2010, tool diameter: 210 mm, No minimum price – guaranteed sale to the highest bidder! The pick-up deadlines specified in the general terms and conditions apply. The absolute latest pick-up deadline is August 31, 2026! TECHNICAL DETAILS Working spindle length: 125 mm Max. tool diameter: 210 mm MACHINE DETAILS Motor power: 5 kW EQUIPMENT Tilting spindle Milling unit: 1 Dusdezf H Iijpfx Agmjw Number of motors: 1 The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents, which are of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8577

Condition: good (used), Board sorting system / sorting system / length sorting system, Esterer Right-hand discharge 5 sorting bins Total length 26 meters 1. Bin: 2 meters 2. Bin: 3 meters 3. Bin: 4 meters 4. Bin: 5 meters 5. Bin: >5 meters In good condition – immediately available Location: Germany, near Landau an der Isar Dsdegw Scqopfx Agmjuw Please also check out my other listings. I look forward to your inquiry.

Condition: used, Year of construction: 2019, cutting width (max.): 3,000 mm, saw blade diameter: 300 mm, No minimum price – guaranteed sale to the highest bidder! The pick-up deadlines specified in the general terms and conditions apply. The absolute latest pick-up deadline is August 31, 2026! TECHNICAL DETAILS Saw unit 1 (tiltable) Motor power: 6 kW Saw unit 2 (tiltable) Motor power: 0.75 kW Working width max.: 3,000 mm Saw blade diameter: 300 mm MACHINE DETAILS Dusdpfxjzf H Hrj Agmjw Connection power: 7 kW The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before pick-up and is responsible for the installation, securing, and use of the machine at the destination. External reference: 8572