Wide belt calibrating sander

Condition: used, Year of construction: 2010, machine/vehicle number: 1000017741, inner dimension length: 1,000 mm, inner dimension width: 840 mm, inner dimension height: 815 mm, operating temperature: 1,700 °C, usable tank capacity: 685 l, No minimum price – guaranteed sale to the highest bidder! The machine was professionally dismantled and stored. All parts and connections are labeled for reassembly. An on-site inspection is possible at any time. TECHNICAL DETAILS Furnace chamber and usable space Usable batch space (W × H × L): 840 × 815 × 1,000 mm Total length of the graphite box: approx. 1,100 mm Usable volume: approx. 685 l Operating temperature: max. 1,700 °C Operating temperature under partial pressure: max. 1,500 °C Operating temperature under vacuum: max. 1,700 °C Temperature uniformity: ± 10 K Temperature fluctuation in the steady state: ± 5 K MACHINE DETAILS Process pressure range: 1 × 10⁻² < p < 1,040 mbar Final pressure in the empty, clean, and cold furnace: < 1 × 10⁻² mbar Leak rate: < 5 × 10⁻³ mbar·l/s Power supply: 3 × 400 V, 50 Hz Permissible voltage fluctuation: max. ± 5 % Installed heating power: max. approx. 190 kW Electrical power of the pump station: approx. 14 kW Knjdpjz I Tt Iefx Alyjc Cooling water flow rate: approx. 150 l/min Cooling water temperature: 20–30 °C Cooling water pressure: 2–4 bar Cooling water quality requirements: according to specification PW 800 943 ND Compressed air for valve operation: 4–5 bar Nitrogen inlet pressure: 5–7 bar Hydrogen inlet pressure: 5–7 bar EQUIPMENT Double-walled furnace chamber made of stainless steel with water cooling Internal graphite box for precise guidance of the process gases Post-cleaned graphite components Automatic control of the entire process Pump station Labeled lines and connections for easier recommissioning Note: Two internal graphite heating elements were damaged during dismantling and must be replaced.

Condition: ready for operation (used), KUPFERMÜHLE DOMA-g-1620-V44 Four-sided planer with constant table height for varying wood thicknesses Working width max. 1620 mm Planing height, 2 sides max. 300 mm Planing height, 4 sides max. 240 mm (OPTION: can be converted to 300 mm) Feed rate in 6 stages 4.5 - 26 m/min Total electrical power 91 kW 4 horizontal planing shafts bottom right 11.0 kW bottom left 15.0 kW top right 18.5 kW top left 18.5 kW 2 vertical milling units x 7.5 kW with mounted aluminum planing heads H 240 mm Machine mounted on a rotary bearing Wood widths up to 820 mm can be planed with energy efficiency with 1 motor at the bottom + 1 motor at the top good technical condition of the machine Kedpfxezlbz Ro Alyenc with functional guarantee year 1981 last inspection by the manufacturer in 2025

Condition: ready for operation (used), Year of construction: 2018, operating hours: 13,270 h, laser type: fiber laser, laser power: 4,000 W, sheet thickness (max.): 20 mm, overall weight: 9,700 kg, year of last overhaul: 2025, The system must be dismantled between November 20, 2026, and November 22, 2026! TECHNICAL DETAILS Laser type: Fiber laser Laser power: 4,000 W Sheet metal thickness (max.): 20 mm Sheet metal thickness steel (max.): 20 mm Sheet metal thickness stainless steel (max.): 20 mm Sheet metal thickness aluminum (max.): 20 mm MACHINE DETAILS Control type: CNC control Automation level: Automatic Actuation type: Electric Power: 4 kW (5.44 hp) Input voltage: 400 V Input frequency: 50 Hz Type of cooling: Water Compressed air connection: 7 bar Laser operating hours: 13,270 h Year of last overhaul: 2025 Dimensions & Weight Dimensions (L x W x H): 9,310 x 7,813 x 2,300 mm Total weight: 9,700 kg Kodpfx Aljz I S Uwjysnc EQUIPMENT CE marking Central lubrication system Cooling unit Documentation/Manual Dust extraction Emergency stop switch Fume extraction Safety light curtain

Condition: excellent (used), Year of construction: 2021, operating hours: 4,689 h, functionality: fully functional, machine/vehicle number: 103, overall weight: 32,000 kg, power: 390 kW (530.25 HP), conveyor belt speed: 2,000 mm/s, fuel tank capacity: 950 l, The machine is equipped with a new roller! The following work was carried out on the machine: Machine washed and cleaned Roller disassembled and bearing shield separated from the roller Ksdpfx Aloz Rqcmjyonc Rack, limiter, and comb attachments disassembled Cooling and air intake system, front door, and soundproofing register disassembled and reassembled Roofs disassembled and reassembled Various brackets repaired and re-welded Oil pan replaced Exhaust system completed Openings in the housing retrofitted with labyrinth sealing New tools mounted on the drum and rack Roller mounted Cable harnesses repaired TECHNICAL DETAILS Type: Size L-C3 VARIOMAT Roller teeth: 42 pieces Limiter: Size L, 20 pieces Roller: New Loading height: 3,307 mm Loading protection: On both sides Longitudinal belt length: 4,450 mm Longitudinal belt width: 1,000 mm Rear belt length: 8,500 mm Rear belt width: 1,200 mm Discharge height: 5,050 mm Conveyor speed: 2 m/s MACHINE DETAILS Engine type: Diesel-hydraulic Engine: MTU 6R1300 Rated power: 390 kW Engine speed: 1,700 rpm Emission standard: EU Stage V Fuel tank: 950 l Additional hydraulic connection: 30 l/min Additional hydraulic connection: 70 l/min Roller drive: 380 kW Drive system: VARIO Hydraulic system: Load-Sensing system Operating hours: 4,689 h Chassis: 3-axle semi-trailer chassis unit Drive: Hydraulic Dimensions & Weight Dimensions in working position (L x W x H): 16,786 x 2,500 x 5,050 mm Dimensions in transport (L x W x H): 9,971 x 2,500 x 3,893 mm Total weight: 32,000 kg Operating hours: 4,689 h EQUIPMENT Basic package Inventhor Type 9 Additional hydraulic connection 30 l/min and 70 l/min Roller drive via planetary gear 380 kW Load-Sensing system Radio remote control, complete Large side GRP maintenance doors easy-to-maintain engine compartment with LED light hydraulically reversible fan wheel loading protection on both sides Fire extinguisher Maintenance ladder Toolbox acoustic start-up warning Doppstadt telematics system 3-axle semi-trailer chassis unit Shredding system Size "L-C3"-VARIOMAT Size "L" - "Limiter" (20 pieces) hydraulic drive Watering on both sides Rear belt 8.5 m, 1,200 mm wide Overbelt magnet neodymium Frame for overbelt magnet neodymium Central lubrication with pump LED lighting package engine compartment and rear Note: The Doppbasket system can be retrofitted for an additional cost.

Condition: like new (used), Year of construction: 2017, operating hours: 108 h, functionality: fully functional, working width: 1,650 mm, power: 370 kW (503.06 HP), type of input current: three-phase, workpiece height (max.): 160 mm, input frequency: 50 Hz, input voltage: 400 V, workpiece width (max.): 1,650 mm, space requirement length: 7,660 mm, COSTA LEVIGATRICI 1650 CALIBRATOR/SANDING MACHINE This machine is in really new condition with only approximately 100 hours of operation. It is fully functional and operates without any issues. Technical Specifications * Machine Type: Automatic sanding / calibration line * Working Width: 1650 mm * Feed System: Motorized conveyor belt with variable speed control * Working thickness: 3 to 160 mm Lower Section: * 3 sanding steel roller units * 1 finishing pad unit * Cleaning system with blowers and brushes Upper Section: * 3 sanding steel roller units * 1 finishing pad unit * Cleaning system with blowers and brushes Unit Power: Knodpfxsyt H Dne Alyec * From 18.75 kW up to 75 kW (depending on the unit) Control System: * PLC control with touchscreen interface Safety: * Safety sensors * Emergency stop system

Condition: ready for operation (used), functionality: fully functional, TECHNICAL DETAILS Drive power: 15 kW EQUIPMENT Control system Suitable for secondary shredding The seller has a suitable conveyor belt in stock as an optional extra. Kjdpez Ngbvofx Alyenc

Condition: ready for operation (used), functionality: fully functional, screw diameter: 200 mm, Granulation of temperature- and shear-sensitive plastics Suitable for soft PVC Suitable for rigid PVC Suitable for HFFR formulations Suitable for elastomer compounds for low-, medium-, and high-voltage cables TECHNICAL DETAILS Screw diameter: 200 mm Knsdpfxsz Ngaxe Alyjc Length from feed inlet to end: approx. 1,100 mm L/D ratio: approx. 5.5 : 1 MACHINE DETAILS Drive power: 72.5 kW Overall machine length: approx. 2,500 mm Feed inlet height: approx. 1,000 mm EQUIPMENT Eccentric granulation EGR Degassing zone Can be used as a single-screw extruder for various processing applications

Condition: good (used), Code: 0312 Brand: TAGLIABUE - COSTA LEVIGATRICI Model: TAG 11 - Norme CE Automatic calibrating sanding machine with 2 belts and movable head for furniture, carpentry, custom-made furnishings, panels, solid wood, tables, composite materials and various - CE Standard Steel enblock Conveyor plane provided with a thick rectified steel structure Sanding belt motors placed inside the base Rubber conveyor belts structured in 3 cloths and sectionated in rings for constant centering on the plane Base with thickness sheet up to 30 mm Movable head using big lifting columns Technical data: Working width 1350 mm Working thickness 3-130 mm Ksdpfxsynk Dns Alyonc Fixed working surface height 900 mm Feed speed from 5 to 30 mt/min Belt dimensions 1400 x 2620 mm Working thickness display Composition: 1° Group Steel Calibrating Roller diameter 280 2° Group Rubber Sanding Roller diameter 300 Cleaning brush - Motor 2 Hp - Suction inlet diameter 160 Total power 57 kW Compressed air 7-8 bar Overall dimensions mm 2100 x 2300 x 2400 h Weight kg 5500

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,500 kg Lifting height: 6,430 mm Mast type: Triplex mast Full free lift: available Fork length: 1,200 mm Hydraulic functions: 3rd valve and 4th valve Side shifter: available Hydraulically adjustable forks: available MACHINE DETAILS Manufacturer: Linde Type: E25 Year of manufacture: 2019 Drive type: Electric Battery type: Lithium-ion Battery year of manufacture: Battery voltage: 90 V Battery capacity: 268 Ah Measured idle voltage: 97.4 V Operating hours: 12,011 h Own weight: 5,200 kg Overall length: 3,700 mm Overall width: 1,200 mm Overall height: 2,824 mm Service valid until: UVV (Technical Inspection Association) valid until: EQUIPMENT EVO facelift model Former Linde full-service unit Hydraulic double pallet clamp Full cabin Heater Windshield wiper White, non-marking tires LED work light front LED work light rear Road traffic lighting with turn signals Orange warning light Safety Light front Safety Light rear Front camera Comfort seat All dimensions are approximate. No warranty is given for typing or measurement errors. Collection conditions: Side loading up to 6 tons with a large forklift on site is possible. Loading is at your own risk. Rear loading via ramp possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If the machine is not collected on time, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Knodpfxoz R Tpko Alyec Lot number: 639

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Kodpfxsz R Sg Is Alysnc Electrical data Battery voltage: 80 V Charging current: 140 A Suitable battery capacity: 800–1,000 Ah Mains connection: 400 V / 16 A Battery connection: REMA 320 A MACHINE DETAILS Manufacturer: TCE Type: 80 V 140 A Year of manufacture: 2026 Condition: New and unused, in original packaging Length: 600 mm Width: 600 mm Height: 600 mm Weight: 70 kg EQUIPMENT 400 V / 16 A mains connection REMA 320 A plug All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons with a large forklift truck available on site is possible. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. In the event of delayed collection, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 8040

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Working height: 900 mm Working width: 1,350 mm Belt changing side: left Workpiece thickness: 3 - 160 mm Frequency-controlled feed speed: 4 - 20 m/min Abrasive belt dimensions: 2,620 x 1,350–1,380 mm Adjustable sanding belt blowing device with 5 settings WRD WORKPIECE CLEANING ROTOR Workpiece cleaning system with 16 rotating nozzles MOBILE OPERATING TERMINAL powerControl with powerTouch SST SOFT STARTER Inrush currents are limited to prevent voltage drops GWRD BELT CLEANING PROGRAM Upon activation, the machine automatically sets to a 10 mm workpiece thickness and activates the blowing rotors. After the feed belt is fully cleaned, the machine returns to its initial setting. Kjdpfsyw Ndmjx Alysnc AAT EXTRACTION DAMPER CONTROL Control of extraction dampers via the terminal (24 Volt DC, without extraction dampers included) UPS EMERGENCY POWER SUPPLY FOR BELT CONTROL 1-3 PCS Uninterruptible power supply for sanding belt oscillation in case of power failure System consists of: SANDTEQ W-700, PROFI SWB735/RRE – sanding from below Wide belt sanding machine with three sanding units for processing wood or wood-like workpiece surfaces Prepared to accept up to two auxiliary units, such as a cleaning brush, satinizing or structuring brush, and rotating cleaning nozzles. Units: I. R UNIT Sanding unit with automatically adjusting contact roller Profiled steel roller, 240 mm diameter With grain compensation Drive motor: 37 kW Abrasive belt speed: 25 m/s - Automatic locking of the sanding unit for fast belt changes and increased process safety - Abrasive belt drives with electronic, wear-free brake - Optical, touchless abrasive belt tracking - Pneumatic abrasive belt tensioning with integrated belt edge compensation II. R UNIT Sanding unit with automatically adjusting contact roller Rubber-coated roller, 240 mm diameter Rubber hardness: 85° Shore With grain compensation Drive motor: 30 kW Abrasive belt speed: 18 m/s III. E UNIT Sanding unit for installing a pressure beam - Automatic locking of the sanding unit for fast belt changes and increased process safety - Abrasive belt drives with electronic, wear-free brake - Optical, touchless abrasive belt tracking - Pneumatic abrasive belt tensioning with integrated belt edge compensation - Protected storage area on the machine for additional sanding inserts Drive motor: 22 kW Abrasive belt speed: 2 – 18 m/s Torque-dependent standby operation to reduce energy consumption. ACP PNEUMATICALLY SUPPORTED PRESSURE BEAM - Adjustable sanding pressure via pressure regulator - Workpiece-controlled engagement and disengagement at the leading and trailing edges - Various sanding inserts, 80 mm wide, with different felt hardnesses Machine dimensions (L x W x H): 3,900 x 2,100 x 2,000 mm Machine weight: approx. 7,500 kg SANDTEQ B-700, PROFI SWT735/RRE – sanding from above Wide belt sander with three sanding units for machining wood or wood-based workpiece surfaces Units as above, additionally: FBM FINISHING BRUSH Brush unit with finishing brush Bristles: horsehair Diameter: 130 mm Drive motor: 0.75 kW Machine dimensions (L x W x H): 2,995 x 2,100 x 2,255 – 2,415 mm Machine weight: approx. 6,500 kg

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Charging voltage: 80 V Charging current: 120 A Suitable battery capacity: 600–900 Ah MACHINE DETAILS Year of manufacture: 2026 Mains connection: 400 V / 16 A Dimensions (L × W × H): 600 × 600 × 600 mm Weight: 70 kg EQUIPMENT Rema connector: 320 A Original packaging All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: * Side loading up to 6 tonnes is possible with a large forklift truck on site. Loading is at your own risk. * Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tonnes and up to a width of 230 cm. * Collection is only possible after receipt of the payment confirmation by email. * Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. Kodpfx Aez R Sguolyonc * In case of delayed collection, a storage fee of €20 per machine and day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 8020

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Battery voltage: 80 V Charging current: 100 A Knedpfjz R Sgnsx Alyjc Suitable battery capacity: 500–700 Ah Mains connection: 400 V / 16 A Battery connector: REMA 160 A MACHINE DETAILS Manufacturer: TCE Type: 80 V 100 A Year of manufacture: 2026 Condition: New and unused Dimensions (L × W × H): 600 × 600 × 600 mm Weight: 70 kg EQUIPMENT Original packaging 400 V, 16 A mains plug REMA 160 A battery connector All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: * Side loading up to 6 t is possible with a large forklift on site. Loading is done at your own risk. * Rear loading via ramp is possible for truck heights of 100–150 cm, up to 15 t, and up to a width of 230 cm. * Collection is only possible after receipt of the payment confirmation by email. * Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. * A storage fee of €20 per machine per day will be charged for late collection. Outstanding storage fees must be paid in full before collection. Lot number: 8011

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, COSTA wide belt grinder, two-roller model, 1350 mm roller width. The machine features a contact roller and a finishing polishing platen. Kedpfx Aley Tx Exeyenc

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Output voltage: 48 V Charging current: 50 A Suitable battery capacity: 300–500 Ah Maximum battery capacity: 800 Ah (?) Protection class: IP66 Mains connection: 220 V Connector type, battery side: Rema, 160 A Knedoz R Sf Rjpfx Alyec Impact protection: available MACHINE DETAILS Year of manufacture: 2026 Overall length: 300 mm Overall width: 200 mm Overall height: 200 mm Weight: 10 kg EQUIPMENT 220 V mains plug Rema connector, 160 A All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: * Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. * Rear loading via ramp is possible for truck heights of 100–150 cm, up to 15 tons, and up to a width of 230 cm. * Collection is only possible after receipt of payment confirmation by email. * Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. * If collection is not carried out within the specified timeframe, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 4850