2 upper dies for press brakes

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, turning length: 300 mm, turning diameter: 300 mm, spindle bore: 52 mm, spindle speed (max.): 4,500 rpm, controller model: FANUC CNC, The machine can be inspected with a lead time of three days. TECHNICAL DETAILS Maximum turning diameter: approx. 300 mm Maximum turning length: approx. 300 mm Spindle bore diameter: approx. 52 mm Maximum main spindle speed: 4,500 rpm Tool turret: 12 stations MACHINE DETAILS Control system: FANUC CNC Machine weight: approx. 2,200 kg Operating hours: approx. 6,458 h Spindle hours: approx. 4,300 h Voltage: AC 380 V (with or without transformer) Rated power: 14.97 kVA Credpfx Aboznb Ntexof Full load current: 22.74 A Interrupting capacity: 5 kA Short-circuit capacity: 10 kA Power of the electric motor according to the manufacturer: 7.5 kW EQUIPMENT Technical documentation Powerful main spindle Robust machine construction for high dimensional accuracy Tool turret with rapid indexing Compact design with low space requirements User-friendly CNC control High reliability Low maintenance requirements Complete technical documentation

Condition: used, Year of construction: 1997, The bending press was manufactured in 1997 in England by EDWARDS PEARSON. The folding press is in good condition, sold with tools. Always serviced and maintained on time. The machine tools are connected and can be tested and inspected. Specification: Model: EDWARDS PEARSON 100/3100 PR6 Year: 1997 Cedorfx Utjpfx Abxerf Working length: 3 100 mm Bending capacity: 100 T Travel: 172 mm Distance between table and frame: 450 mm Working speed: 100 mm/s Return speed: 110 mm/s Axes: auto X1, X2, Y1, Y2, Z1 , Z2 , R Tools: Available Weight: 7 T Other: New screen recently replaced, keyboard attached for ease of use. If you have more questions, we will be happy to answer.

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: R17393-376-4-0, overall weight: 32 kg, load capacity: 8 kg, controller model: Yaskawa YRC1000, teach pendant manufacturer: Yaskawa, number of axes: 6, TECHNICAL DETAILS Robot axes: 6 Crsdpezmwafofx Abxef Payload: 8 kg Self-weight of robot arm: 32 kg MACHINE DETAILS Controller: Yaskawa YRC1000 Teach pendant manufacturer: Yaskawa Power supply: 3-phase AC 380–440 V, 50/60 Hz Input current: 15 A Max. device overcurrent protection current: 15 A Short-circuit current: 2.5 kA Power supply type: ERAR-1000-06VX8-E10 EQUIPMENT Yaskawa Motoman GP8 robot arm Yaskawa YRC1000 robot controller

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: FN498167, Year of construction: 2015, operating hours: 15,254 h, lifting height: 4,700 mm, free lift: 1,490 mm, mast type: triplex, construction height: 2,132 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Cedpfx Aezrlxgobxsrf Free lift: 1,490 mm Lift height: 4,700 mm Overall height: 2,132 mm MACHINE DETAILS Mast type: Triplex Battery voltage: 48 V Battery capacity: 625 Ah Battery year of manufacture: 2015 Hydraulic valves: 3rd/4th valve on the fork carriage Operating hours: 15,254 h EQUIPMENT Triplex lift mast with free lift 3rd/4th hydraulic valve on the fork carriage Charger External reference: SL9789SP

Condition: new, Year of construction: 2026, The CORMAK HBS275 band saw for cutting tubes, profiles and bars is widely used in all locksmith and metalworking workshops where precision, quality and cutting speed matter. The model is equipped with a 0-60° swivel arm; the saw guides are based on sintered carbide. The frame construction ensures accurate and quiet operation. Machine characteristics Codpeudi Unofx Abxsrf The horizontal metal band saw with swivel arm enables cutting in a plane perpendicular to the axis of the material being cut and at any angle within the range from 0 to 60°. The material to be cut can be fed manually or by any mechanical device, while the tool feed is automatic. The blade guides are equipped with special carbide plates and bearings. This has a major impact on blade guidance, service life, straightness, accuracy and cutting quality. Carbide guidance greatly reduces wear of the machine and blade. The machine is equipped with an efficient coolant pump with a closed coolant circuit. The saw arm is made of a single cast-iron casting and, together with the 27 mm wide cutting blade used in this saw, fully enables multi-series cutting of both profiles and solid materials. The vice is located in an adjustable bed and is equipped with a quick clamp. The blade guides are equipped with hard metal plates – sintered carbide and a rolling bearing system. It is precisely the SINTERED CARBIDE GUIDES that are responsible for the precision and straightness of the cut. The arm has been inclined at an angle of 25°, which increases blade durability and improves cutting conditions. A cleaning brush is mounted at the bottom of the arm to achieve excellent cleanliness and blade operation. The machine drive is transmitted via a worm gearbox. The machine has a three-phase motor with two cutting speeds and motor thermal protection. The shape of the upper part of the base forms a tray for draining coolant and collecting chips generated during material cutting. A cast-iron work table with a swivel arm and a control panel on a separate arm is mounted to the base. In the cutting process, the main cutting movement is the movement of the cutting blade, while the feed is the lowering of the arm. The arm lowering speed (cutting speed) is regulated by a hydraulic cylinder. The feed speed is adjusted on the saw control panel. Two cutting blade speeds are available: 37.5 and 75m/min. In the lower position of the arm (after cutting the material), the cutting blade drive is switched off automatically. Safety is ensured by cutting blade guards and micro-switches that stop the motor after the cutting cycle is completed or when any guard is opened; additional protection consists of automatic shutdown of the saw in the event of cutting blade breakage. The machine drive is transmitted by a motor with a worm gearbox. The motor with thermal fuse protects against overheating during operation. Technical data TOTAL POWER 1.5kW POWER SUPPLY 400V 50Hz ARM LOWERING ADJUSTMENT hydraulic cylinder BLADE LENGTH 2450 x 27 x 0.9 mm BLADE SPEED 37.5 / 75m/min VICE BASE HEIGHT 900 mm MACHINE DIMENSIONS (WITH ARM RAISED) (L x W x H) 1720 x 800 x 1800 mm WEIGHT 215 kg

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 90621285, Year of construction: 2021, operating hours: 560 h, lifting height: 2,800 mm, construction height: 1,950 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 2,800 mm Overall height: 1,950 mm MACHINE DETAILS Mast type: Standard mast Battery type: Lithium-ion battery Operating hours: 560 h EQUIPMENT Codpfezrlw Asx Abxjrf Initial lift Charger External reference: SL1145SP

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H2X386H10283, Year of construction: 2017, operating hours: 5,612 h, lifting height: 4,625 mm, free lift: 1,500 mm, construction height: 2,121 mm, Equipment: sideshift, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 4,625 mm Crodpozrlwijfx Abxjf Overall height: 2,121 mm Free lift: 1,500 mm MACHINE DETAILS Mast type: Triplex mast with free lift Battery voltage: 48 V Battery capacity: 585 Ah Tires: new Operating hours: 5,612 h EQUIPMENT Cabin Battery Charger Side shifter External reference: SL11370SP

Condition: new, functionality: fully functional, Year of construction: 2026, roller (bottom) diameter: 310 mm, roller (top) diameter: 320 mm, roller diameter: 310 mm, roller length: 1,550 mm, working width: 1,500 mm, sheet thickness steel (max.): 38 mm, overall weight: 12,500 kg, total length: 4,500 mm, total width: 2,300 mm, total height: 1,740 mm, power: 18.39 kW (25.00 HP), working length: 1,500 mm, Equipment: documentation/manual, emergency stop, FACCIN HAV 15342 variable three-roll bending machine Electronically controlled, hydraulic three-roll bending machine Technical data: Number of rollers: Three Geometry of the side rollers: variable Working width: 1550 mm Top roller diameter: 320 mm Side roller diameter: 310 mm Pressure force against the top roller: 160 tons Working pressure at nominal force: 250 bar Guaranteed installed power: 18 kW (25 hp) Guaranteed maximum rotation speed: 3.5-7 m/min Guaranteed machine weight: 12,500 kg Length: 4,500 mm Width: 2,300 mm Height: 1,700 mm Credpst Akt Refx Abxof Guaranteed performance: for material with yield strength 260 N/mm² Rolling capacity (full working width) 38 mm Bending capacity (full working width) 20 mm from pipe diameter 1,600 mm Rolling capacity (full working width) 30 mm Bending capacity (full working width) 17 mm from pipe diameter 415 mm Standard equipment: Variable geometry with linear guides for roller movement Extra long folding bearing for increased frame stability Electronic parallelism system EPS Hardened rollers for high wear protection All rollers ground after heat treatment Siemens S7-HMI PLC control system PGS-CLASSIC control system with Siemens touch panel Hitech hydraulic and electrical package Simultaneous rotation and roller movement Safety ripcord with emergency stop and CE certification Central lubrication Water cooling for the hydraulics Cone bending device Prepared for retrofitting of supports and roller conveyors FACCIN Advantage Package AP

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 18199, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 20,000 rpm, number of slots in tool magazine: 210, TECHNICAL DETAILS CNC control: FANUC 30iM for 5-axis machining Working area Travel in X-axis: 550 mm Travel in Y-axis: 410 mm Travel in Z-axis: 450 mm Swivel range of B-axis: +110 to −110° Rotational range of C-axis: 360° Feed rate Rapid traverse rate for X, Y and Z axes: 50,000 mm/min Rapid traverse rate for B-axis: 30 min⁻¹ Rapid traverse rate for C-axis: 50 min⁻¹ Tool magazine Number of tool positions (standard): 30 Extension of the tool magazine: 210 tool positions Preparation for expansion to 240 tool positions Pallet system Number of pallets: 10 Pallet size: Ø 130 mm Pallet interface: Capto C6 Workpiece size: max. Ø 250 × H 250 mm Workpiece weight: max. 40 kg Pallet clamping force: 22.5 kN Main spindle Spindle speed: 40 – 20,000 rpm Motor power: 7.5/11 kW Spindle torque: max. 70 Nm up to 1,500 rpm Spindle interface: HSK 63A Special functions: High-speed start-up at machine start, Automatic warm-up cycle MACHINE DETAILS Machine weight: approx. 12,000 kg Coolant system Coolant pressure through the spindle: 70 bar Delivery rate of internal cooling: 24 l/min Pump capacity of internal cooling: 5.5 kW EQUIPMENT Direct linear scale from Heidenhain in the X, Y and Z axes Linear scale with pneumatic locking Direct linear scale via rotary encoder for the B and C axes CE marking KNOLL coolant system Drag chain chip conveyor Coolant filter CTS25-50T External cooling Coolant shower Codpfx Abezpyh Rjxerf Compact filter KF200 Cooling water cooler VWK 90-D Coolant spray bars in the working area Two spiral chip conveyors Mechanical air filter TEBARON TEB/BV2 Single column with base plate for the air filter system Measuring probe Renishaw OMP 60 Software Easy Probe Pressure sensor for tool length measurement and tool breakage monitoring

Year of construction: 2002, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 211 S, No minimum price – guaranteed sale to the highest bidder! Credpfx Abjzpximjxjf TECHNICAL DETAILS Bar passage max.: 65 mm Diameter of front spindle bearing: 110 / 150 mm Collet clamping system: up to 60 mm HAINBUCH collet system: up to 65 mm Main spindle Spindle speed max.: 3,000 rpm Power of main spindle motor: 11 / 15 kW Main turret Number of tool positions: 8 Tool holder: VDI 30 Max. working stroke Z-axis: 50 mm Rapid traverse speed: 15 m/min Feed force: 6,790 N Additional sub-turret Number of tool positions: 8 Tool holder: VDI 20 Cross slide Number of horizontal slides: 2 Working stroke X1/X2 axis max.: 70 mm Working stroke Z1 axis max.: 230 mm Feed force X1/X2 axis: 8,000 N at 50 bar Vertical slide Number of vertical slides: 2 Working stroke X3/X4 axis max.: 70 mm Manual length adjustment: 50 mm Rapid traverse speed: 15 m/min Feed force X1/X2 axis: 8,000 N at 50 bar MACHINE DETAILS Dimensions & Weight Machine height: 1,700 mm Footprint: 2,900 x 1,700 mm Machine weight: 4,100 kg

Condition: used, Metal band saw Hans Schreiner MBS270, good condition, 1.5 kW, 2450 mm band length, 227 kg Subject to price changes, errors, printing and typographical mistakes excepted. Crodpfxewzzgns Abxjf

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 142967, turning diameter over cross slide: 300 mm, spindle speed (max.): 5,000 rpm, rapid traverse X-axis: 30 m/min, feed rate X-axis: 5 m/min, controller model: Mazatrol PC Fusion CNC 640T, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area Maximum turning diameter: 300 mm Maximum swing diameter: 525 mm Maximum swing diameter over the slide: 350 mm Maximum bar diameter: 51 mm Main spindle Speed range: 35 – 4,000 rpm Drive power: 15 kW Maximum torque: 350 Nm Spindle nose: A2-6 Spindle bore: 61 mm C-axis positioning: 0–360° / 0.001° Counter spindle Speed range: 35 – 5,000 rpm Drive power: 7.5 kW Maximum torque: 57 Nm Indexing: 72 positions / 5° Tool turret Number of tool stations: 12 Equipment: Stationary and driven tools Turret indexing time to station 1: approx. 0.2 s Driven tools Drive power: 3.7 kW Maximum torque: 35 Nm Speed range: 25–4,500 rpm Travel ranges X-axis travel: 190 mm Z-axis travel: 575 mm B-axis travel: 585 mm Rapid traverse rates Rapid traverse X-axis: 30 m/min Rapid traverse Z-axis: 30 m/min Rapid traverse B-axis: 18 m/min Feed ranges Feed X-/Z-axis: 0–5,000 mm/min Feed C-axis: 1–2,000 rpm MACHINE DETAILS Control system: Mazatrol PC Fusion CNC 640T EQUIPMENT Crjdjzpxgxjpfx Abxjf Counter spindle Bar feeder

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, workpiece weight (max.): 600 kg, number of slots in tool magazine: 60, swivel angle C-axis (max.): 360 °, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Spindle mount: SK40 Travel range X-axis: 600 mm Travel range Y-axis: 560 mm Travel range Z-axis: 560 mm Swivel range B-axis: 360° Number of tool positions in the magazine: 60 MACHINE DETAILS Control system: Siemens Codpfjzpxd Rjx Abxorf Number of pallets: 2 Pallet size: 400 × 500 mm Permissible pallet load: 600 kg Machine weight: 10,500 kg

Condition: used, Year of construction: 1988, Distance between centres 1200 mm Speed A) 70 - 380 U/min. turning speeds B) 380 - 2000 U/min weight 2,2 t +++++ Csdpfxek Sat De Abxjrf Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: ready for operation (used), Year of construction: 2002, operating hours: 18,419 h, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, workpiece weight (max.): 350 kg, number of slots in tool magazine: 24, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Crodszpxdwspfx Abxef Travel range, X-axis: 630 mm Travel range, Y-axis: 560 mm Travel range, Z-axis: 560 mm Tool magazine slots: 24 Tool holder: SK 40 Rotary range, C-axis: 360° Table clamping surface: 600 x 1,000 mm Table diameter: 600 mm Maximum table load: 350 kg Table weight: 800 kg Number of T-slots: 8 / 1 T-slot width: 14 H12 / 14 H7 T-slot spacing: 63 mm MACHINE DETAILS Number of axes: 5 (3+2) EQUIPMENT Controlled NC swivel milling head (B-axis) NC rotary table integrated in the fixed table (C-axis)