Grinding machine

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 351.10.001.16, functionality: fully functional, workpiece length (max.): 3,000 mm, workpiece width (max.): 920 mm, workpiece height (max.): 50 mm, drilling depth: 55 mm, TECHNICAL DETAILS Maximum horizontal drilling depth: 30 mm Maximum vertical drilling depth: 55 mm Horizontal spindles: 6 Vertical spindles: 9 Spacing between horizontal spindles: 32 mm Spacing between vertical spindles: 32 mm Maximum diameter of horizontal spindles: 15 mm Maximum diameter of vertical spindles: 8 x 15 mm, 1 x 35 mm Workpiece dimensions, X-axis: 280 - 3,000 mm Workpiece dimensions, Y-axis: 180 - 920 mm Workpiece dimensions, Z-axis: 10 - 50 mm Speed, X-axis: 25 m/min Speed, Y-axis: 25 m/min Speed, Z-axis: 15 m/min Motor power, drilling head: 1.5 kW Speed, drilling head: 3,600 rpm Speed, circular saw unit: 9,000 rpm Speed, milling spindle: 24,000 rpm Diameter of circular saw blade: max. 100 mm MACHINE DETAILS Operating/ambient temperature: 15–40 °C Humidity: max. 90 % at 20 °C Operating pressure: 6–8 bar Nominal compressed air consumption: 60 l/min Air consumption: 1,650 m³/h Diameter of compressed air supply: 5/8" Inner diameter: 16 mm Dimensions & Weight Dimensions (L x W x H): 2,100 x 1,605 x 1,950 mm Weight: 850 kg Operating hours (estimated): approx. 800 h EQUIPMENT Nlsdpfszcdkwsx Alhsc Additional support roller tables

Condition: excellent (used), Weinig four-sided planer max planing width 230mm max planing height 120mm 5 heads, bottom-5,5KW; left and right-11KW, top-11KW, bottom-5,5KW feed - 4KW fully adjustable heads electrically adjustable up and down and planing width 40mm spindles feed on gimbal rollers, with smooth adjustment WEINIG brand solid planer, length of the machine 415cm Nodporigxyjfx Alholc machine checked in original condition

Condition: ready for operation (used), Year of construction: 1998, operating hours: 26,000 h, functionality: fully functional, machine/vehicle number: J0124, travel distance X-axis: 1,800 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 750 mm, controller model: Heidenhain iTNC 426, rotational speed (max.): 6,000 rpm, TECHNICAL DETAILS Travel range X-axis: 1,800 mm Travel range Y-axis: 850 mm Travel range Z-axis: 750 mm Spindle nose to table distance range: 200 mm - 950 mm Spindle center to column distance: 920 mm Nljdpfezdpqwsx Alhjc Table dimensions X: 2,000 mm Table dimensions Y: 800 mm Max. table load: 2,200 kg Tool interface: SK50 Magazine capacity: 30 Spindle speed: 6,000 rpm Feed rate: 5 m/min Rapid traverse: 12 m/min MACHINE DETAILS Control system: Heidenhain iTNC 426 Dimensions & Weight Dimensions (L x W x H): approx. 5,700 x 3,850 x 3,350 mm Weight: approx. 16,500 kg Operating Hours Total operating hours: approx. 51,000 h Spindle operating hours: approx. 26,000 h EQUIPMENT 4th axis installed as a rotary table Documentation/Manual Spindle speed infinitely adjustable Chip conveyor Coolant system Vices

Condition: ready for operation (used), Year of construction: 2007, pressing force: 28 t, stroke length: 200 mm, throat depth: 200 mm, installation height: 325 mm, working length: 835 mm, TECHNICAL DETAILS Pressing force: 28 t Bending length: 835 mm Travel range of the back gauge: 0 - 370 mm Stroke: 200 mm Distance between frames: 890 mm Support table: 200 x 275 mm Overhang: 200 mm Installation height: 325 mm Number of cylinders: 1 Nedpfx Aozdd Rgolhjlc Working speed Pressing speed: 8-10 mm/s Retraction: max. 35 mm/s Positioning accuracy: +/- 0.05 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,600 x 1,500 x 2,200 mm Total weight: 3,500 kg EQUIPMENT Operating manual Safety device Mechanical tool clamping system (top)

Condition: used, 1) PVC Double Head Welding Machine – Emmegi Fusion 2LV3440 Year of manufacture: 2011 Double head welding machine for PVC profiles. Machine in perfect working condition, regularly maintained annually, complete with manual. 2) PVC Corner Cleaning Machine – Emmegi / Rinaldi Trimmer E Year of manufacture: 2011 Automatic corner cleaning machine for PVC profiles, equipped with lateral support arms. Machine in working condition, regularly maintained, complete with manual. 3) Glazing Bead Cutting Machine – Emmegi Microbo 4200 DX Year of manufacture: 2008 Cutting machine dedicated to glazing beads, designed to ensure precision and repeatability. Included equipment: Roller conveyor Electronic control system Machine in working condition, regularly maintained, complete with manual. 4) Single Head Cutting Machine – OMG mod. Bifra 550 Year of manufacture: 2006 Blade diameter: 550 mm Roller conveyors included Measuring handwheel included 5) Reinforcement Screwdriver Machine – Emmegi Fissa A Year of manufacture: 2012 Screwdriver machine for metal reinforcements used in window and door production. Machine in working condition. 6) Hardware Assembly Table – Emmegi BMF 3400 Year of manufacture: 2008 Table dedicated to hardware assembly for window and door frames. Complete with: Screwdriver Espagnolette system Hardware storage system Machine in working condition. 7) Testing and Glazing Table – Emmegi Vitro Year of manufacture: 2008 Table dedicated to testing and glazing operations for window frames. Machine in working condition. 8) Compressed Air System – NEW Year of manufacture: 2024 – never used Nodeywkc Rjpfx Alhslc Complete system for compressed air production and treatment, consisting of: Boge C12-2LF screw compressor, soundproofed, 11 kW, inverter, air flow from 530 to 2,020 l/min, super-silent version Vertical galvanized tank 725 liters, max pressure 10.8 bar, complete with safety valve and pressure gauge Electronic timed drain valve MTA CA Condensate water/oil separator MTA LP04 Compressed air dryer MTA DE-XG027, air flow 2,700 l/min 9) 4-Axis Machining Center – MECAL MC 304 ATLAS Year of manufacture: 2007 4-axis machine equipped with front working unit, specifically designed for aluminium processing. Maximum working length: 7430 mm X-axis working stroke: 7210 mm Y-axis (transversal) stroke: 550 mm Z-axis (vertical) stroke: 500 mm A-axis (rotating spindle axis): rotation range ±180° 10) Double Head Cutting Machine – TEKNA TK 145 Year of manufacture: 1994 Blade: Ø 500 mm Max cutting length: 4000 mm Blade inclination: outward 11) Cantilever Rack Structure Double-sided cantilever system, 1 double-sided block, 9 levels per side: Height: 9 m Max load per column side: 8,100 kg Max load per arm: 900 kg each 12) Single Head Copy Router – Rinaldi Magnum 360I Year of manufacture: 2003 The machine allows processing on four sides without repositioning the workpiece, ensuring maximum precision and operational continuity.

Condition: ready for operation (used), Year of construction: 2012, controller model: NR4000.2.1 IPC, Equipment: documentation/manual, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Engraving area, X-axis: 100 mm Engraving area, Y-axis: 150 mm CNC engraving and embossing machine – TSM series Nodjzddzrspfx Alholc Type: TSM 15-10-UG Year of manufacture: 2012 Control system type: NR4000.2.1 IPC EQUIPMENT Operating manual available Documentation and software available

Condition: defective spare-parts repository (used), Year of construction: 2020, spindle speed (max.): 18,000 rpm, travel distance X-axis: 500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 150 mm, table load: 20 kg, No minimum price – guaranteed sale to the highest bidder! The new price of the machine was 39,875 EUR! TECHNICAL DETAILS Travel range, X-axis: 500 mm Travel range, Y-axis: 500 mm Travel range, Z-axis: 150 mm Dimensions of the T-slot table (L x W): 700 x 570 mm Maximum table load: 20 kg HFS spindle power: 80 W HFS spindle speed: 60,000 rpm Motion Nodpfjzddwmjx Alhslc Rapid traverse: 100 mm/s Repeatability: 0.01 mm Tool holder: 6 mm MACHINE DETAILS Electrical connection: 240 V Software: Signumeric EQUIPMENT Bellows covers Energy guide chains Jäger engraving spindle 42-2 W27 FS incl. frequency converter Reinforced base frame Heat dissipation via spindle carrier 2 m cable outlet Quick-change system for on-site electric engraver Documentation and software available Note: without monitor and without PCA control module (engraving computer)

Condition: good (used), Code: 0136 Brand: ITALPRESSE Model: FORMATIC 20.9 Hydraulic fluid membrane press Two sided lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2000 x 900 Daylight mm 325 Nledpfjpbvqvsx Alhjc Cylinder stroke mm 325 Heating electric boiler Kw 27 Thrust ton 300 ton N° 3 thrust cylinders Hydraulic unit power Kw 5,5 Pressure control manometer Automatic pressure reset Opening timer Overall dimensions mm 3300 x 1400 x 2400 h Weight kg 8100

Year of construction: 2018, condition: ready for operation (used), operating temperature: 950 °C, ambient temperature (max.): 70 °C, nominal flow rate: 40 m³/h, overpressure (max.): 0.2 bar, machine/vehicle number: 220173941, TECHNICAL DETAILS Maximum overpressure in the pipes: 0.2 bar Maximum operating temperature in the pipes: 950°C Maximum ambient temperature: 70°C Pipe volume: 40 l EQUIPMENT Dew point or cp control Njdpjzddb Eofx Alhelc Soot filter in duplex version Fully automatic power control in the range of 50-100%

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 665100, overall weight: 4,700 kg, center height: 125 mm, Round grinding machine with robot! TECHNICAL DETAILS Nledjzcwfuepfx Alhsc Center height: 125 mm MACHINE DETAILS Control: Fanuc 18i-T Total weight: 4,700 kg Operating hours Automatic cycle time (according to diagram): 41,411 h Feed time (according to diagram): 14,251 h EQUIPMENT Universal Robots UR5 robot Standard accessories 1 grinding wheel set, right-hand, 500 x 110 x 203.2 mm 1 manual swivel chuck for turning parts with manual indexing every 2.5 degrees Automatic balancing device MARPOSS type E 82 Hydraulic quill retraction for the tailstock Stroke monitoring for the tailstock Standard workpiece spindle MK 5 DIN 55026 size 5”

Condition: excellent (used), Year of construction: 1996, OTT ALPHA 110 wide-belt sander - machine in stock - after the technical review - very good condition - German production - year of production 1996 - segment shoe - a perfect solution for varnish / veneer TECHNICAL SPECIFICATIONS: - grinding width 1100 mm - grinding height 1-150 mm - combi unit with task-controlled membrane sanding shoe - engine power 11 kW - blowing on the belt - pneumatic oscillation - two types of belt speed 4.5 and 18 m / s - aggregate with felt roller - engine power 0.75 kW - shaft oscillation - aggregate with a cleaning brush - engine power 0.75 kW - smoothly regulated feed - feed speed range 4-18 m / min - 1.5 kW feed motor power - electric height adjustment - vacum table Njdpogi Dryjfx Alhslc - 3kW fan motor power - diameter of nozzles 4 x 120 mm and 1 x 150 mm Transport dimensions: - length 200 cm - width 245 cm - height 210 cm - weight 2500 kg 1. The Alpha Combi aggregate is a grinding unit with a contact shaft with a diameter of 150 mm and a hardness of 90 shor. It is integrated with a sectional pneumatic shoe with a section width of 27 mm 2. EMS 27 optical system - detects minimal unevenness and adjusts the pressure force of a particular section of the shoe at a given point of the ground element. 3. It is possible to control the individual sections of the shoes adjacent to each other in the range -2 to +4 -

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 32.469.3143, center height: 125 mm, grinding length: 1,000 mm, The machine underwent a partial overhaul in 2009. TECHNICAL DETAILS Maximum height: 125 mm Maximum width: 1,000 mm EQUIPMENT Automatic working cycle Intermediate plates 50 mm for a maximum height of 175 mm Vibration-damping pads Machine light Internal grinding device for a maximum diameter of 70 mm Internal grinding spindle UJ7P Coolant supply through the workpiece spindle, including protective cover Side and angled dressing device Swiveling dressing device for internal grinding Dressing stop for internal grinding Collet chuck Nlodpfx Aljzcwfnehjc Set of collets Dial indicator stop for table swiveling with a 1/100 mm dial indicator Sine bar Table fixed stop Strip-type filter system SONY digital measuring system, 2 axes Documentation

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 2,134 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, table load: 1,814 kg, spindle speed (max.): 8,100 rpm, The machine can be inspected while powered on during production! TECHNICAL DETAILS Travel range, X-axis: 2,134 mm Travel range, Y-axis: 813 mm Travel range, Z-axis: 762 mm Max. spindle speed: 8,100 rpm Spindle motor power: 22.4 kW Max. torque: 122.0 Nm at 2,000 rpm Table dimensions: 2,134 x 711 mm Max. load capacity on table: 1,814 kg Number of tool magazine slots: 31 Distance from spindle nose to machine table (max.): 864 mm Distance from spindle nose to table (min.): 102 mm MACHINE DETAILS Control system: HAAS Table dimensions: 2,134 x 711 mm Max. load capacity on table: 1,814 kg EQUIPMENT Documentation/Manual Chip conveyor Nsdpfx Alozg Drzeholc

Year of construction: 1990, condition: reconditioned (used), 4-sided planer unimat U23, 7 heads Nsdjpqxnxepfx Alhelc 4-sided Weinig 7-head planer, 7 universal arrangement: horizontal, lower vertical, right, left, vertical, right, vertical, upper horizontal, lower horizontal, and the last universal. The drive is realized by means of cardans. The drive is secured with Rotax clutches. Pressure of the element using pneumatics. Feed smoothly regulated by an inverter. Machine feed 0-42 m/min. 2.5 kW and 7.5 kW engines. Grinding table and a new one. Additionally, new wiring and new electrics. The machine has been completely renovated. Warranty .

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 2,700 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,050 mm, spindle speed (max.): 3,000 rpm, controller model: HEIDENHAIN iTNC530, The machine can be inspected while powered on during production! TECHNICAL DETAILS Travel range X-axis: 2,700 mm Travel range Y-axis: 1,000 mm Travel range Z-axis: 1,050 mm Max. feed rate X/Y/Z: 10,000 mm/min Table dimensions: 3,300 x 1,000 mm T-slots: 7 x 22 2-axis diagonal milling head: 1 x 2.5 Spindle speed: 60 - 3,000 rpm Motor power: 22/30 kW Tool holder: ISO 50 (DIN69872-B) MACHINE DETAILS Control system: HEIDENHAIN iTNC530 Nodpfx Alozg Dq Djhjlc Coolant pressure through the spindle: 19 bar EQUIPMENT Adjustable control panel in front of the machine Enclosure with front-facing doors Machine documentation Cooling and chip disposal Chain conveyor in the longitudinal direction