Vertical turret lathe

VNL250DK

Condition: ready for operation (used), Year of construction: 1993, swing diameter 1400 mm faceplate diameter 1500 mm Redpfx Aevxa Tpjg Nep Control Sinumerik 850T work height max. 1400 mm Tool changer 12 stck. workpiece weight 5 t YEAR OF CONSTRUCTION: 1993 Mechanical overhaul: 2010

Condition: used, Max. Swing Diameter: Ø2,700 mm Max. Turning Diameter: Ø2,500 mm Max. Cutting Height: 2,000 mm Max. Torque: 40,403 N·m Max. Cutting Force: 3,000 kgf Max. Workpiece Weight: 12,000 kg Table Diameter: 2,000 mm Table Speed Range: 1 – 200 rpm Table Speed Control: Automatic 2-step Table Indexing Accuracy: 0.001° C-axis Cutting Feed Speed: 0 – 900 deg/min C-axis Max. Speed: 2.5 rpm Milling Spindle Speed: 30 – 3,000 rpm Milling Spindle Torque: 45 kgf·m Ram Head Item Specification Number of Tools: 1 pc Tool Size: 32 × 32 mm Ram Section Size: 240 × 240 mm Spindle Taper: ISO 7/24 No.50 Rjdeyk U Ngspfx Ag Nop Tool Magazine Capacity: 24 tools Max. Tool Weight: 50 kg CHIP CONVEYOR TOOL MEASUREMENT SYSTEM (RENISHAW) MANUAL/HYDRAULIC COMBINATION CHUCK LINEAR SCALE (X Z C) MILLING TOOL 4 pcs LATHE TOOL 5 pcs

Condition: excellent (used), Year of construction: 2004, CNC Control: FANUC 15i-MB X mm: 1.020 Redpfxjuftils Ag Nsp Y mm: 1.020 Z mm: 1.020 B mm: - A degrees: - Number of pallets: 2 Table dimension mm: 630 x 630 Table load capacity kg: - Cutting feed rate mm / min X,Y,Z: - Max. rapid traverse m / min X, Y, Z: - Spindle speed rpm: 10.000 Spindle power kW: 22 / 18,5 Cone type: BT-50 Torque Nm: - Type of loader: Chain Magazine positions: 80 Max. tool diameter mm: - Max. tool dia. Tool dia. with empty adjacent positions: - Max. tool length mm: - Max. tool dia. Max. tool length mm: - Max. tool weight kg: - Capacity of coolant tank l.: - Cooling through the spindle bar: - Yes EQUIPMENT Chip extractor APC with 2 stations Cooling through the spindle Electronic handwheel control. Dimensions Length mm: Width mm: Height mm: Weight Kg: 22.000

Condition: good (used), Year of construction: 1970, center width: 2,350 mm, center height: 2,400 mm, Max. blank / workpiece over bed:2400 Centre height over bed: 1200mm Distance between centers: 2350mm Length of the gap: 400mm Maximum sheet thickness: 6mm Rsdpfx Agjxtaxwo Nop Stroke X-Axis: 1200mm Stroke Y-Axis: 300mm Speedrange: 6 - 675Rpm Power: 40kW Stroke pinole quill: 1200mm Length: 4500mm Width: 3200mm Height: 2500mm Weight: 10200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2026, faceplate diameter 1.600 mm swing diameter 2.000 mm turning height 1.400 mm Control Fanuc max. Torque 23.863 Nm cutting capacity max. 3.000 kgf max. workpiece weight 10.000 kg table diameter 1.600 mm table speeds min power capacity - table 37/45 kW resolution 0,001 ° Working speed 0 - 1.200 °/min max. table speed 3,333 1/min Shank diameter 32 mm spindle cone ISO 7/24 / No.50 Spindlespeed 30 - 3.000 min/-1 power capacity - Tool Spindle 15 / 18,5 kW max. Torque 235 Nm ram cross section 220 mm x-axis 1.900 mm z-axis 900 mm cross rail adjustment 700 mm tool taper MAS-BT 50 number of toolpositions 24 (12 + 12) pos. max. tool weight 50,0 kg draw bolt DIN 69872.50 rapid feed (X / Z) 7,5 m/min feed speeds max. 7.500 mm/min rapid traverse of the crossrail 300 mm/min Rjdpfx Ageyiu N Dj Njp total power requirement 80 kVA weight of the machine ca. 34,0 t dimensions of the machine ca. 7,50 x 6,50 x 5,20 m CNC - Vertical Turret Lathe HANKOOK - VTC 160 E - NEWMACHINE

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Technical details faceplate diameter 1800 mm swing diameter 2000 mm turning height 1270 / 1120 mm Control SIEMENS 840 D workpiece weight max. 5000 kg ram head dimension 250 x 250 mm Rsdpfjymlf Djx Ag Nsp table turning speeds 1 - 320 U/min cross rail - adjustment 400 mm ram head - cross travel (X) -2770 / +2275 mm ram head - vertical travel (Z) 1250 mm c-axis 360° (0,001°) deg milling drive 37 kW turning speed range - milling 10 - 3000 U/min power capacity - table 100 kW Torque 31784 Nm feed range (X/Z) 0,1 - 15000 mm/min weight of the machine ca. 55 t Additional information Used CNC vertical lathe for turning, drilling and milling First machine installation in the year 2011. Max. workpiece diameter: 2040 mm Max. workpiece height: 1270 mm Ram stroke: 1250 mm Max. workpiece weight: 5000 kg (per pallet/chuck) Table speed range: 1.0 - 320 rpm Table drive motor: 100 kW Drilling and milling spindle: 37 kW Crossbar travel: 2 steps of 200 mm each Total electrical connection value: 218 kVA CNC control: Siemens 840 D Number of NC axes: 4 (X, Z, C, crossbar adjustment) Travels: X-axis: -1650 to + 2165 mm Z-axis: 1250 mm Rapid traverse X- Z-axis: 15 m/min Number of tool magazine spaces: 80 spaces in the chain magazine, of which 60 x HSK 100 and 20 x Capto C6 Disc magazine 12-pos. for rotary holders and attachment heads Coolant system with filter and circulation unit Chip conveyor Oil-mist-extractor 1 pallet with jaws, diameter 1800 mm 1 hydraulic chuck with base jaws, diameter 1800 mm Various drilling and milling heads 2 measuring probes Several turning tool holders Special feature: Pallet changer with two stations, equipped with a face plate Ø1800 mm and a six-jaw lever compensation chuck with mechanical centrifugal force compensation Ø1800 mm. Note: The machine is in a pit. Condition description: The cross roller bearing on the Carnaghi was replaced about half a year ago. The Siemens components in the control cabinet were also completely replaced at the end of 2023. The machine also has a measuring probe for tool measurement and an external Renishaw measuring probe for workpiece measurement. As a special feature, the machine also has a measuring probe installed on the Z-axis (Z1-axis). This brings an advantage in terms of accuracy and time, as the tool does not have to be put down for measuring. However, it is currently shut down and should be overhauled when it is put back into operation. The machine also has a Rotomors six-jaw lever compensating chuck with centrifugal force compensation, which was completely overhauled in 2020/21.