Universal machining center

MAHO MH400E

Condition: used, x-travel 400 mm y-travel 250 mm z-travel 375 mm Control MAHO CNC 432 table-size 700 x 270 mm Knodsxx A I Espfx Af Sjd turning speed range 80 - 4.000 U/min tool taper ISO 40 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: reconditioned (used), Year of construction: 1999, Universal tool milling machine Make: KUNZMANN Model: WF 4/3 Year of manufacture: 1999 - partially overhauled, newly painted, RAL7035 light gray / RAL3027 raspberry red RAL7016 anthracite gray Ksdpjub R R Ssfx Af Sjnd Mach. no.: 343006 with guarantee geometric acceptance with test report Accessories: - HEIDENHAIN TNC 124 path control - HEIDENHAIN HR 330 electronic handwheel - Fixed table 640 x 350 (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic tightening system ISO 7388 - Central lubrication, electric - Coolant system - Splash guard cabin, electrically secured - Control panel on the base - Operating instructions Used as seen The machine is technically corresponding to the state of the year of manufacture.

Condition: used, Year of construction: 1987, Universal CNC Milling Machine CNC MAHO MH 400 E Travel X: 400 mm Travel Y: 375 mm Travel Z: 250 mm Numerical Command CNC PHILIPS 432 Table: 700 x 270 mm Cone: SA40 Spindle speed: from 80 to 4000 RPM Year of construction: 1987 Central lubrication Manually swivel head Supplied with doc + machine parameters Voltage: 380 V Width: 2200 mm Depth: 2000 mm Knsdpfxoxxa A Ho Af Sed Total height: 2000 mm Weight: approx 1,5 T

Condition: used, CNC tool milling machine MAHO type MH 400 E Machine No. 43072 Year of construction 1989 travel X: 400 mm Y: 250 mm Z: 375 mm table size 700 x 270 mm distance spindle nose / table max. 410 mm tool holder ISO 40 with draw pin type B spindle speed 80 - 4000 rpm. 18 steps feed speed 1-1500 mm/min. infinitely variable Kodpfx Afjh Ic Ufe Sond Rapid traverse (X, Z and Y) 2,5 m/min. Pinol shift vertical 50 mm spindle drive 2,2 kW mains connection 400 Volt, 50 Hz, 19 kVA - swivelling control panel with CNC path control PHILIPS 432 - LCD monitor VISCOTECH - hydro-mechanical tool clamping - swiveling device for the vertical milling head - Splash guard cabin as table enclosure with 3 folding doors - Electrical control cabinet fixed to the machine - Interface V24 (RS 232) for data transmission - 52470 operating hours, main switch on - rigid angular table - coolant unit with coolant pump adjacent under the machine - central oil lubrication Vogel - operator's manual, electrical circuit diagram space requirement L x W x H 2250 x 1800 x 1850 mm weight approx. 1,5 ton. good condition

Year of construction: 1990, condition: ready for operation (used), Two nearly identical Maho milling machines, one with and one without a tool changer, as well as a complete range of accessories/spare parts, are available. Travel X/Y/Z: 600mm/450mm/450mm, tool holder: ISO40, quill stroke: 80mm, spindle speed: 5000rpm, feed rate: 4m/min, rapid traverse: 6m/min. Tool diameter: 130mm/100mm, max. tool length: 250mm, max. tool weight: 6kg. Machine dimensions: approx. 3150mm/3750mm/2150mm, weight: approx. 3600kg. Documentation available. On-site inspection possible. Kodpfx Afoxu I Ato Sjnd

Condition: ready for operation (used), table mounting size: 440 x 1200 mm table movement x: 950 mm table movement y: 250 mm table movement z: 475 mm spindle taper: ISA 40 spindle turning speed range: 40 - 1800 rpm Kedpfxjuriuxo Af Send carriages longitudinal and cross: 16 - 6630 mm/min carriages vertical: 5,6 - 224 mm/min electrical connection: 380 V, 7,5 kVA space needed: 2100 x 2000 x 2150 mm weight: 2400 kg

Condition: used, CNC control, card slot, control cards, plug-in cards, circuit boards, control rack Kedpfx Aeq T T Nhsf Sjnd -Manufacturer: Philips, control rack from CNC milling machine MAHO MH 800C -PCB: 4022 224 7062 -Card: 4022 224 3433 -Graphic Modem: 4022 224 3451 -Cent Proc: 4022 226 2331 -Drive Mod.: 4022 226 3645 / 4022 226 3690 -LS/LS board: 4022 226 3680 -Inp Outp Mod: 4022 226 3531 2 pieces -Power supply: 4022 226 2270 PE 1870/03 -Individual components: see photos -Price/sale: complete -Dimensions: 375/310/H340 mm -Weight: 13.4 kg