Milling machine

Kunzmann WF 4/3 TNC 124

Condition: used, Year of construction: 2007, feed length X-axis: 400 mm, feed length Y-axis: 350 mm, feed length Z-axis: 400 mm, travel distance X-axis: 400 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, quill travel distance: 60 mm, table load: 250 kg, Equipment: documentation/manual, Used universal milling and drilling machine Kunzmann WF 4/3 Heidenhain Position Control TNC 124 Travel X/Y/Z = 400/350/400 mm Infinitely variable speed 1-4000 rpm Spindle SK40 DIN 69871 (Form AD) with drawbar according to DIN 69872 Horizontal and vertical spindle Fixed angle table 650 x 350 mm, 6 x 14 H7 T-slots Coolant system Electronic handwheel HEIDENHAIN HR 410 HEIDENHAIN KW130 probe system with cable Chip splash guard cabin, hydraulic tool clamping, central lubrication. Machine folder with operating manual and control user manual included. Further technical data available upon request. Godpfx Asya Hrljg Djbi The machine is located at our facility in 71334 Waiblingen-Beinstein, is immediately available, and can be inspected by appointment. Please contact us in advance to arrange a visit.

Condition: used, CNC Press Brake AMADA Type HFBO 50 x 2000 Serial No. HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8 axes - CNC control Operator II Pressing force: 50 tons Working length: 2090 mm Stroke: 200 mm Frame depth: 420 mm Distance between side frames: 1660 mm Max. tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Gjdpfxow Iq Uge Ag Djbi Mains connection: 400 Volt, 50 Hz, 20 Amp. - 8-axis CNC control Operator II (Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2) - 2 freely programmable backgauge fingers, movable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-style tool clamping for the upper tool (5 AMADA Expert, 5 UKB 50.667 H=120 mm) - Tool holder for lower tool, 60 mm wide - 11-piece upper tool set, 30°, total length 1675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) in length - 2-piece lower tool, 88° - V8, total length 1250 mm - consisting of: 1x 835 / 1x 415 mm in length - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book included Weight: 4,700 kg Good condition

Condition: reconditioned (used), Year of construction: 2008, Universal tool milling machine Make: KUNZMANN Model: WF 4/3 Year of manufacture: 2008 - partially overhauled, newly painted, RAL7035 light grey / RAL3027 raspberry red Mach. no.: 344349 Guarantee: 6 months geometric acceptance with test report Accessories: Gbsdpfx Ashikrrsg Dji - HEIDENHAIN TNC 124 path control - HEIDENHAIN HR 410 electronic handwheel - Fixed table 650 x 350 (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic tightening system DIN 69872 - Central lubrication, electric - Coolant system - Chip tray - Operating instructions - Used as seen -

Condition: used, Year of construction: 1996, x-travel 400 mm y-travel 350 mm z-travel 400 mm tool taper SK 40 spindle turning speed range 1,0 - 4.000 U/min feeds 0 - 2000 mm/min quill stroke 60,0 mm table-size 650 x 350 mm T-slots 14 H7 Control TNC 124 engine output 5,5 kW weight 1800 kg dimensions of the machine ca. 2000 x 1000 x 2100 mm Gbodpfxew U U Sij Ag Dsi New price ~ 55.000 euros (!!) Furnishing : - Universal tool milling machine - HEIDENHAIN pattern control TNC 124 - The control panel can be swiveled to the right of the machine - hydraulic tool changer (DIN 69872) - Vertical milling head - SK 40 - X-axis feed .. 0 - 2000 mm / min - Y-axis feed .. 0 - 2000 mm / min - Feed Z-axis .. 0 - 2000 mm / min - Central lubrication, electrical - coolant device - Chip tray - Operating instructions for machine + control Special accessories included: - hydraulic machine vice - many tool holders - HEIDENHAIN HR 410 electronic handwheel

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : HSK40 - Spindle speeds : 12.000 [rpm] - Spindle power : 7,6 [kVA] LINEAR AXES - Travels on X/Y/Z axes : 500 / 410 / 610 [mm] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 26 - Tool exchange time : 0.7 [sec] TABLE - Table dimensions : 650 x 400 [mm] - Maximum weight upon table : 200 [kg] POWER SUPPLY - Supply voltage : 220 [V] - Total installed power : 25 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 1.640 x 2.100 [mm] - Machine height : 2.274 [mm] - Machine weight : 2.250 [kg] MACHINE HOURS - Number of working hours : 9070 [h] EQUIPMENT - CNC : BROTHER A00 Gjdpfx Asuhbt Rog Dsbi - Electronic handwheel - Interface : RS232 - Workpiece probe : Renishaw OMP 60 - 4th axis : LEHMANN sans variateur - Chips conveyor - Coolant tank - Coolant through spindle : 70 [bars] - Oil mist extractor : AAF Astrosta - Electric transformer - Tool-holders : 42

Condition: reconditioned (used), Year of construction: 2002, Universal tool milling machine Make: KUNZMANN Model: WF 4/3 Year of manufacture: 2002 - partially overhauled, newly painted, RAL7035 light gray / RAL3027 raspberry red RAL7016 anthracite gray Mach. no.: 344025 with guarantee geometric acceptance with test report Accessories: - HEIDENHAIN TNC 124 path control - HEIDENHAIN HR 410 electronic handwheel - HEIDENHAIN KT 130 electronic 3D touch probe system for recording the workpiece position for determining workpiece reference points for measuring a finished part incl. Weldon chuck SK40/Ø 16 mm - universal table 650 x 395 mm (T-slot: 14 mm) can be swiveled around 3 axes can be rotated 360° (as 4th axis digital displayed in the control) Gbedpfxem Nbwte Ag Dji pivotable +/- 30° tilting range towards the machine 45° tilting range away from the machine 15° centering hole Ø 32 mm table load 150 kg - vertical milling head SK 40 with hydraulic tightening system DIN 69872 - central lubrication, electric - coolant system - splash guard cabin, travelling, electrically secured - operating instructions used as seen The machine is technically corresponding to the state of the year it was built.

Condition: like new (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 4,000 rpm, quill stroke: 60 mm, table width: 650 mm, table length: 350 mm, overall weight: 1,800 kg, Equipment: documentation/manual, Dear Sir or Madam, For sale is a CNC milling machine of the type Kunzmann WF4/3 from year of manufacture 2004. The machine can be operated manually and under control. The Heidenhain TNC124 control is excellent for learning the basics of CNC programming and is still very popular in production as well as for machining special parts. The very quickly folding vertical milling head makes the Kunzmann a real all-rounder with nevertheless low space requirements. You will receive this machine from us workshop tested, partially overhauled or completely overhauled, available with or without cabin. Godju H U Hkopfx Ag Dobi Availability: on request Year: 2004 Control: Heidenhain TNC124 Table: fixed angle table 650x350mm Travel: X400mm/Y350mm/Z400mm Quill stroke: 60mm Connected load: approx. 7kW Speed range: 1-4000 rpm Feed: 0-2000 mm/min Tool holder: SK40 Equipment and accessories: coolant system, central lubrication, manual, documentation, machine feet, electronic handwheel, etc. Our service promise to you: - We are a certified master workshop in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and, if necessary, worn parts are replaced in advance - On request we can completely or partially overhaul the selected machine for you - On request you can order additional accessories such as tools, etc., directly - On request we can also install other accessories such as safety devices - We are also happy to take care of shipping and/or installation

Condition: used, EWAG WS 11 SP is a tool and cutter grinder designed for precision, high accuracy and reliability. Working capacities: X/Y/Z axes 100 mm, grinding-wheel diameter 75 mm, workpiece spindle speed 100-1300 t/min, vertical adjustment of grinding head 100 mm, slewing range horizontal 165°, grinding spindle speeds 2500-7100 t/min, collet attachment 20 W. Technical specifications: voltage 50 Hz 3x380 V, total power required 2 kVA, machine weight about 400 kg, dimensions L850×W850×H1580 mm. Key equipment: flange for wheel, dust extraction, set of grinding wheels, lamp, helical grinding device W20, feed unit (Z-axis) 4 E-M, grinding stroke 3 J. Achieves tight tolerances; typical applications: automotive, watchmaking, machine tools, aerospace, medical Gsdpfexyi I Iox Ag Debi

Condition: new, functionality: fully functional, turning diameter over cross slide: 280 mm, spindle bore: 58 mm, turning diameter over bed slide: 470 mm, center height: 235 mm, turning length: 1,000 mm, quill stroke: 127 mm, quill diameter: 68 mm, total length: 2,150 mm, total width: 810 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, bed width: 300 mm, overall weight: 1,800 kg, quill mount: MK 4, Tip height: 235 mm Center distance: 1000 mm Spindle bore: 58 mm Spindle nose according to DIN 55029: Camlock D6 Motor power: 5.5 kW Spindle speed range: 20-2000 mm Features include Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surface) of the tool and face slides Manual central lubrication with one pump for longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Gsdpfxocirnie Ag Dsbi Chuck guard Switch rod with 3 adjustable cams Machine light Fixed center point Set of machine mounting plates

Condition: ready for operation (used), X-travel: 500mm, y-travel: 400mm, z-travel: 350mm, quill stroke: 50mm, rotational speed: 20-5000/min, connected load: 10kVA, controls: Maho CNC 432, length: 2022mm, width: 3030mm, height: 1915mm, weight: 2.1t, operational hours counter: 29,578h, with documentation, without spare parts, mechanically and electrically the machine runs flawlessly, the control elements were recently overhauled. Gbodpfxekn R Dhs Ag Dei