Used Klsa Kpl 330 for sale (1,943)

Condition: ready for operation (used), functionality: fully functional, 6226 - OMS INVINCIBILE OK 330 DOUBLE MITER SAW Motor power: 1.8 kW Manual movement of the units Blade diameter: 330 mm 3000 RPM Maximum distance between units: 3500 mm Cutting angle adjustment: -45°/+45° Vertical and horizontal pneumatic clamps Cutting process started by two buttons Iijdpfx Asy N Rg Tek Asf Safety switch Width: 900 mm, Height: 1500 mm Year: 2003

Condition: used, Year of construction: 2010, operating hours: 80,000 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 560 mm, displacement volume: 442 cm³, injection pressure: 1,946 bar, mold height (min.): 660 mm, ejector force: 69 N, ejector stroke: 180 mm, total length: 5,700 mm, total width: 1,700 mm, total height: 2,200 mm, overall weight: 10,950 kg, The machine is currently in production, but it will need to be relocated soon as it is being replaced. Isdezub Ntepfx Ak Aoif

Condition: ready for operation (used), Year of construction: 2014, Printing technology: piezo DOD printheads: Xaar 1001, resolution: 720x360dpi, drying: 1xUV GOZ and 1xUV FOZ Höhnle with 7,2kW, pinning system (LED) after printing unit 1+5, extraction: in the drying unit for cooling the UV lamps and for odor minimization and improvement of sensory conditions, inert gas system: oxygen-reduced curing unit (inert gas system), consumption: under 6m³/h, printing: roll-to-roll, web width: 350mm, print width: 330mm, repeat length: min./max. printable section length 10-1000mm, print tolerance: single spacing +/-0,2mm, cumulative spacing: +/-1,5mm (over one meter), register: register accuracy +/-50μm, max. speed: 48m/min with 4 colors depending on ink coverage, white at 30m/min, speed must be preselected from 18 to 48m/min, print pre-treatment: corona with 1500VA, web cleaning: polymer rollers LC 350, air shafts: for cores with 76mm diameter for unwinding and rewinding, air shaft clamping pneumatic, clamping releasable to allow rotation of the winding mandrel, max. roll diameter for unwinding and rewinding: 610mm, max. roll weight for unwinding and rewinding: 120kg. power consumption: approx. 39kVA/60A, air consumption: 100NL/min, cooling capacity: approx. 60.000BTU/h =18kW, data interface: USB2.0, Ethernet, data format: PDF-X1 or X3 or EPS or AI, length: 4550mm, width: 1750mm, height: 2200mm, weight: approx. 3t. With documentation, chiller unit and inks. The machine is fault-free, complete and ready for operation, and has been serviced regularly. On-site inspection is possible. Iedpfx Aoxz Ewnok Ajif

Condition: used, Year of construction: 2007, machine/vehicle number: 0003000421, functionality: unexamined, AUTOMATIC BAND SAW Isdpfx Ajy Ndnwok Ajif

Condition: ready for operation (used), Year of construction: 2001, operating hours: 29,173 h, functionality: fully functional, machine/vehicle number: 11045522744, travel distance X-axis: 500 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, controller model: HEIDENHAIN MILLPLUS, spindle speed (max.): 18,000 rpm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid commits you to collecting the item promptly between October 7, 2026, and October 14, 2026! TECHNICAL DETAILS Travel range X-axis: 500 mm Travel range Y-axis: 420 mm Travel range Z-axis: 380 mm Rapid traverse rate X-axis: 50 m/min Rapid traverse rate Y-axis: 50 m/min Rapid traverse rate Z-axis: 50 m/min Feed rate X-axis: 20 m/min Feed rate Y-axis: 20 m/min Feed rate Z-axis: 20 m/min Spindle speed: 18,000 rpm Torque: 1,100 Nm Tool holder: SK 40 Holder diameter: 40 mm Number of tool positions: 32 Max. tool length from spindle nose: 280 mm Max. tool weight with automatic tool changer: 6 kg Max. total weight of tools in magazine: 90 kg Iiedpfx Ajzu Ixnsk Asf Table length: 500 mm Table width: 380 mm Max. workpiece weight: 330 kg Clamping area: 500 × 380 mm Distance between T-slots: 63 mm T-slot width: 4 H7 Centering bore diameter: 30 H6 Max. table rotation speed: 33 rpm Max. swivel torque: 1,400 Nm Swivel speed: 26 rpm Linear scale resolution X/Y/Z: 0.001 mm Positioning tolerance: 0.010 mm MACHINE DETAILS Control system: HEIDENHAIN MILLPLUS Rated apparent power: 40 kVA Input voltage: 400 V Input frequency: 50 Hz Input current: 80 A Dimensions and weight Dimensions (L x W x H): 3,500 x 2,400 x 2,500 mm Total weight: 7,000 kg Operating hours Counter 1: 80,842 h Counter 2: 29,173 h EQUIPMENT NC rotary table with swivel axis

Condition: excellent (used), functionality: fully functional, Motor power 2.2 kW Manual feed of the aggregates Blade diameter 330 mm 3000 rpm Maximum aggregate spacing 3300 mm Cutting angle adjustment -45/+45 degrees Vertical pneumatic clamps Cutting process started by foot pedal Safety switch Width 900 mm, height 1500 mm Iijdpfx Aoy N Ribok Asf

Condition: ready for operation (used), Year of construction: 2018, A Grafisk Maskinfabrik roll-fed labeling machine with integrated printing system is available. Web width: 330mm, web speed: 100m/min, rewind reel min./max.: 25mm/73mm, substrate thickness min./max.: 40g/300g/m², torque: 10Nm-100Nm, max. reel diameter: 250mm, machine weight: approx. 1300kg. Documentation available. On-site inspection is possible. Iiedpfx Akewufzco Asf

Condition: good (used), Year of construction: 2009, functionality: fully functional, The supporting structure is made from a thick, monolithic steel block with a reinforced core. The construction is triangular with a wide base and is designed to ensure the machine's stability under all processing conditions. Guideway lubrication is centralized, meaning all guideways on the machine are lubricated from a single point. The CNC features a full aluminum worktable with grooves for vacuum limitation or fixture mounting. This type of worktable is especially useful for “NESTING” operations. The electrical cabinet is built according to international standards, ensuring total reliability of the integrated components. Technical specifications: Working dimensions: With vertical milling: 3260 x 1250 mm With drilling head: 3330 x 1540 mm Maximum workpiece height: 180 mm X, Y, Z axis travel: 3420, 1690, 280 mm Tool storage positions: 12 Vacuum pump: 100 m3/h Power: 10.5 kW Rated voltage: 400 V Frequency: 50/60 Hz Machine weight: 3400 kg Software: Xilog3 (supports .dxf file import) Iijdpoy Nv Ucofx Ak Aof Year of manufacture: 2009

Condition: used, Year of construction: 2017, travel distance X-axis: 435 mm, travel distance Y-axis: 465 mm, travel distance Z-axis: 560 mm, workpiece weight (max.): 80 kg, total height: 2,755 mm, total length: 3,360 mm, total width: 3,870 mm, overall weight: 8,500 kg, spindle nose: MAS BBT 40, 5-axis Vertical Machining Centre CNC Control Matsuura G-Tech 31 i Table size ø 130 mm Table load 80 kg Number of pallets 10 max workpiece dia x height 330 x 300 mm Movement X-axis 435 mm Movement Y-axis 465 mm Movement Z-axis 560 mm C-axis (table rotation) 360° A-axis (table tilt) -125/+10° Spindle speed 50 - 15.000 R/min Iiedpfxsy Ny Aks Ak Ajf Spindle taper MAS BBT 40 Spindle motor 7,5/5,5 kW Magazin capacity 90 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: ready for operation (used), Year of construction: 2011, A CNC 10 axis pipe cutting system HGG including a plasma source Kjellberg HiFocus 280i is available. Pipe diameter range: 30mm-330mm, max. pipe load: 20kN, max. pipe length: 13000mm, max. workpiece weight: 2000kg, max. cutting angle: 70°, max. plasma cutting current: 280A. Documentation available. An on site inspection is possible. Iedpfx Asytgpdok Aoif

Condition: ready for operation (used), L&Z Lathe WEILER LZ 330 incl. new 3-axis digital readout (from educational facility) - "NEW" 3-axis digital readout - Center height 165 mm - Swing over bed 330 mm - Turning length 800 mm - Spindle speed range (gearbox) 25–2800 rpm - Automatic longitudinal/cross feeds - New Multifix toolpost with holders - Three-jaw chuck - Collet system with 20 collets - Original copy attachment Iedpfx Aoy Id Uhjk Aoif - Various accessories - Documentation Dimensions (LxWxH): 1.8x0.7x1.6 meters / Weight: 800 kg Errors and omissions excepted.

Condition: used, Harwi wall-mounted vertical saw Model: Harwi Giraffe Motor: 2.2 kW Blade diameter: 250 mm Cutting length: 250 cm Cutting height: 155 cm Iodpfezvd Dvsx Ak Asif Machine length: 330 cm

Condition: used, Year of construction: 2007, cutting diameter 330 mm saw band length 4115 mm cutting width 0,9 mm main drive motor 3,7 kW Roller conveyor length 5000 mm Roller conveyor width 700 mm roll diameter - bore 150 mm total power requirement 13 KVA weight of the machine ca. 1,8 t Bandsaw filling machine The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Iisdpfx Ajzfqhmjk Asf We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Year of construction: 2010, functionality: fully functional, OMET FlexyServo 330 mm Year of manufacture: 2010 Printing process: Servo-driven UV flexo Condition: Used – excellent condition Location: Europe _____ Machine Configuration • 6 x UV flexo printing units • 6 x GEW UV drying units • Double die-cutting stations • 1 x Gap Master system • Turn bar (web turner) • Sheet-off unit with additional die-cutting station • Suitable for adhesive label production _____ Equipment & Tooling • 6 sets of tooling • 6 anilox rollers • 3 magnetic cylinders (currently in production) _____ Technical Highlights & Advantages This OMET FlexyServo is a modern servo-driven flexo press offering excellent register accuracy and efficient production performance. Iijdeyyn Rwspfx Ak Aef Key advantages: • Servo technology for high precision and reduced waste • Strong UV drying system (GEW) • Flexible configuration with multiple die-cutting options • Well-maintained machine in excellent condition • Immediate availability with testing possible This machine is ideal for converters looking for a reliable and efficient narrow web solution. _____

Condition: used, Year of construction: 2007, cutting diameter 330 mm saw band length 4115 mm cutting width 0,9 mm main drive motor 3,7 kW Roller conveyor length 5000 mm Roller conveyor width 700 mm roll diameter - bore 150 mm Iijdpfxezfqh Ts Ak Aef total power requirement 13 KVA weight of the machine ca. 1,8 t Bandsaw filling machine The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Gas metal arc welding machine, arc welding machine, MIG/MAG welding machine, pulse welding machine, inverter welding machine, impulse welding machine Iisdpozrt E Uofx Ak Aef -Manufacturer: Ess, MIG-MAG shielded gas welding machine -Type: E1-3300 -Max. welding current: 330 A -Features: Water-cooled, remote control -Accessories: Hose assembly, ground cable (see photos) -Dimensions: 1020/520/H980 mm -Weight: 116 kg

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, power: 242.71 kW (329.99 HP), DOPPSTADT AK 330 S Diesel engine: 330 HP Equipped with: Screen basket (hole site: 120 mm), radio remote control, Iisdoy Duuwspfx Ak Aof original vehicle papers. Service was done. New tyres in April 2026. In very good and working condition.

Condition: used, Year of construction: 2014, TECHNICAL DATA: Type: 5-color digital UV inkjet press with separate white printing unit Length: 4550 mm Width: 1750 mm Height: 2200 mm Weight: 3000 kg Connected load: 39 kW / 60 A Power supply: 400 V, 3-phase, 50 Hz Auxiliary power: 230 V, 50 Hz (chiller) Compressed air consumption: 100 NL/min Required cooling capacity: 18 kW (60,000 BTU/h) Data interfaces: USB 2.0, Ethernet COOLING UNIT (RECOLD RE-C 160 INERT) Cooling capacity: 16,000 W Refrigerant type: R134a Refrigerant charge: 4.5 kg Power consumption: 8.5 kW Max. current: 15 A PRINTING TECHNOLOGY: Process: Piezo DOD Printheads: Xaar 1001 Resolution: 720 × 360 dpi UV DRYING SYSTEM: UV lamps: • 1× Hönle UV GOZ, 7.2 kW • 1× Hönle UV FOZ, 7.2 kW Pinning: LED pinning after print units 1 and 5 Exhaust: Integrated lamp cooling and odor reduction INERT GAS CURING SYSTEM: Type: Oxygen-reduced curing unit Gas consumption: < 6 m³/h WEB AND PRINT PARAMETERS: Process: Roll-to-roll Web width: 350 mm Print width: 330 mm Repeat length: 10–1000 mm Register accuracy: ± 50 µm Print tolerance: • Single distance: ± 0.2 mm • Cumulative per meter: ± 1.5 mm Speed: • 4-color mode: up to 48 m/min • With white ink: up to 30 m/min • Adjustable speed range: 18–48 m/min WEB TREATMENT AND HANDLING: Corona station: 1500 VA Web cleaning: Polymer roller LC 350 Antistatic units: 3 pieces Edge guiding: Before print module Roll diameter (unwind/rewind): max. 610 mm Roll weight (unwind/rewind): max. 120 kg Shafts: Pneumatic expanding shafts, 76 mm core Splice table: Integrated slitting and splicing table SUPPORTED SUBSTRATES: • Coated and uncoated paper • PP, PE, PVC, POPP (white or transparent) • Aluminum foil (coated or uncoated) • PET films • Acrylic coatings • CN-based primers • PET-based primers • Hybrid dispersion primers INK SYSTEM: Ink type: UV-curable, low migration Food & pharma compliance: Indirect contact Free monomers: < 10 ppb Ink laydown: 8.2 g/m² at 100% area coverage Cartridge change: Possible during operation Empty cartridge signal: Optical or acoustic PRINTHEAD MAINTENANCE: Ink recirculation system: Enclosed design Automatic daily cleaning: Suction cleaning before operation Manual cleaning: Lint-free cloth SOFTWARE: Iijdpfxjxzrvde Ak Ajf • RIP software: Esko Artwork • ICC profile management • Supported data formats: PDF-X1, PDF-X3, EPS, AI • Internal storage for designs • Unlimited substrate recipe storage • Touchscreen operator panel CONTROL AND SAFETY: • UV lamp overheat and operational monitoring • Machine interlock in event of UV system failure • Ink level warning system • Emergency stop

Condition: used, Year of construction: 2004, Victory 330/80 PLUS Year: 2004 Serial No.: 52863 Operating hours: 103,000 Screw: D40 CC200 A01 4-circuit water cooling 1x core pull 4x digital input, 4x digital output Isdpjzcaxdefx Ak Aeif Few sockets ROBOT: TecnoMatic Micro 210/0184 Year: 2021 Load: 3 kg X-Y-Z – servo C – pneumatic

Condition: used, Year of construction: 2005, operating hours: 11,800 h, functionality: fully functional, spindle bore: 41 mm, turning length: 750 mm, turning diameter: 330 mm, turning diameter over bed slide: 435 mm, quill diameter: 50 mm, center height: 165 mm, spindle speed (max.): 4,500 rpm, spindle motor power: 11,000 W, overall weight: 1,400 kg, Equipment: rotational speed infinitely variable, Description For sale is a cycle-controlled WEILER E30X750 CNC lathe with a Siemens 810 D control system. Manufacturer/Model: WEILER E30x750 Year of manufacture: 2005 Control system: Siemens 810 D Condition: good, fully functional Location: near Munich Inspection: on-site or via video call by arrangement Pictures/Video: Further pictures and videos of the running machine will be provided upon request. Technical data: Working area: Center height: 165 mm Swinging diameter over bed: 330 mm Swinging diameter over cross slide: 160 mm Distance between centers: 750 mm Turret: Turret head DIN 55027 / DIN ISO 702-3: Size 5 Spindle bore: 40.5 mm Spindle diameter in the front bearing: 70 mm Max. torque on the turret: 180 Nm Main drive: Drive power 100% / 60% duty cycle: 9 / 11 kW Speed range: 1–4,500 min⁻¹ Number of speeds: continuously variable Feed / Rapid traverse Feed drive: Iodozbybvspfx Ak Ajif Three-phase AC feed drives Feed range (continuously variable): longitudinal: 0.001–50 mm/rev (Note: additionally specified 0–20 mm/rev) transverse: 0.001–50 mm/rev Feed force: longitudinal: 6,000 N transverse: 3,000 N Max. rapid traverse speed longitudinal/transverse: 8 / 4 m/min (Note: additionally specified 10 / 7.5 / 5 / 3.5 m/min) Thread cutting range: Metric threads: 0.1–2,000 mm Inch threads: 112–1/64 threads/inch Tailstock / Quill: Quill diameter: 50 mm Quill stroke: 110 mm Internal taper DIN 228: MK 3 Dimensions / Weight: Machine weight: approx. 1,400 kg Dimensions (L × W × H): 1800 × 1350 × 1700 mm Interested? Contact us for further information and to arrange an inspection appointment. Provider MT EVO, Puch bei Salzburg

Condition: excellent (used), functionality: fully functional, fuel type: diesel, overall weight: 30,800 kg, Year of construction: 2021, Equipment: cabin, steel tracks, CATERPILLAR 330, year 2021, 8699 hours, weight 30,800 kg, 205 kW, equipped with hammer/clamp system, quick coupler, locking valves, original paint, no welding repairs. Iedpfx Akezrtlus Ajif

Condition: ready for operation (used), Year of construction: 2022, operating hours: 715 h, controller manufacturer: SIEMENS, laser power: 3,000 W, punching force: 18 t, sheet thickness (max.): 6 mm, overall weight: 18,500 kg, total width: 9,945 mm, total height: 2,500 mm, product length (max.): 8,862 mm, number of axes: 3, This 3-axis TRUMPF TruMatic 6000-1600 fiber was manufactured in 2022. It features a maximum laser power of 3,000 W and a punching force of 180 kN, with a maximum punching frequency of 917 strokes/min. The machine has a large working area, allowing for combined punching and laser processing. If you are looking to get high-quality punching and laser cutting capabilities, consider the TRUMPF TruMatic 6000-1600 fiber machine we have for sale. Contact us for further details. • Laser source: TruDisk 3001 solid-state laser, 3,000 W, fiber-optic beam delivery (10 m), compact cutting head, anti-collision, protective glass, closed beam guidance, programmable cutting gas pressure • Control/OS/Interface: Rexroth IndraMotion MTX CMP70; Windows Embedded; 17-inch touchscreen; 4 GB program memory; 320 GB HDD; USB; RJ45 10/100 Mbit/s; Internet teleservice; integrated technology database; NC program management; production planning; automatic machine shutdown; network connection for programming/production systems • Working area: • Punching (no reposition): 3,050 x 1,550 mm • Laser cutting (no reposition): 3,050 x 1,550 mm • Combined (no reposition): 2,500 x 1,550 mm • Combined (with reposition): 3,050 x 1,550 mm • Max sheet thickness: 6.4 mm; Max workpiece weight: 230 kg • Max part size via flaps: 500 x 500 mm (laser) / 500 x 500 mm (punching); via chute: 80 x 50 mm • Axes/performance: • Drives: Maintenance-free AC servo motors (X/Y/C); electrohydraulic punching head • Max speeds: X 90 m/min; Y 90 m/min; simultaneous 108 m/min; C-axis 330 rpm (punching/thread forming) • Frequencies: Max punching at E=1 mm: 917 strokes/min; marking: 2,800 strokes/min • Accuracy: Pa ±0.1 mm; Ps ±0.03 mm; min increment 0.001 mm • Punching unit: • Force: 180 kN; electrohydraulic head; rotary single-station tool holder • Tool circumferences: punching 76.2 mm; forming 101.6 mm; optional 110 mm • Change times: basic 3.2 s; MultiTool 0.3 s • Magazine: 25 linear positions; standard 22 tools; up to 220 with MultiTool • Clamps: 3 hydraulic; fully rotatable tools; programmable blank-holder; tool length compensation; punch lubrication; chip extraction with automatic tube emptying and fill-level estimation; stroke counter; tool lubricant level monitoring; WhisperTools compatible • Forming/punching functions: • MultiTool; MultiBend; thread forming (M2.5–M10); surface marking/embossing; vertically movable clamps • Max MultiBend: width 55 mm; height incl. material 25 mm; angle up to 90° • Automatic thread-forming lubrication; thread counter • Laser cutting capability (max thickness): • Mild/structural steel: up to 6 mm (O2 or N2) Iedpfx Akozul Dzj Asif • Stainless steel: up to 6 mm (N2) • Aluminum: up to 5 mm (N2) • Laser functions: NitroLine; FocusLine; FastLine; FlyLine; ControlLine; slug detection; ejector cylinder for laser-cut parts; laser event log; automatic cutting-head height adjustment • Standard machine equipment and safety: • Rigid C-shaped welded frame; coordinate guide system; linear tool magazine • 3 hydraulic clamps; programmable repositioning; foot switch for clamp closing • Radiation protection at cutting head; two 500 x 500 mm part flaps with sensors • Ball tables; two finished-part containers; chip container • Compact dust extraction and filtration unit • Water-air cooling unit (machine and laser) • Initial hydraulic oil filling • Two-level safety light curtains; fast drive shutdown; protection against scattered laser radiation

Year of construction: 2004, condition: ready for operation (used), Max. web width: 330 mm Min. / max. paper weight: 90 – 160 g/m² Max. unwind roll diameter: 700 mm Max. rewind roll diameter: 400 mm Ijdpfoy Shz Hjx Ak Asif Core diameter: Unwind: 76 mm / Rewind: 76 mm Max. speed: 230 m/min Description: Unwind unit, splicing table with clamping device, web guiding and web tension control (including automatic web fixing during stop operation), single punching station (no tools included) with rewind for the punching grid, up to 12 slitting knives in a cutting unit with separators for slitting and/or longitudinal cutting of the rolls, extended operator panel for settings, counter (labels or meters) as well as inspection control (missing label detection) with visual check, 2 driven rewind shafts for fast and efficient production. All safety devices are installed on the machine.

Condition: ready for operation (used), Year of construction: 2007, Main motor (kW): 27 Infeed system Saw length (mm): 3300 Iedpfx Aozgwpgjk Asif Saw width (mm): 2200 Panel thickness (mm): 40 All specifications are provided by the manufacturer.

Condition: good (used), Year of construction: 2007, operating hours: 68,651 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 35 mm, displacement volume: 154 cm³, Equipment: documentation/manual, ENGEL Victory 330-120 Tech Stock no.: 503558 Manufacturer: ENGEL Model: Victory 330-120 Tech Control system: CC100 Year of manufacture: 2007 Operating hours: 68,651 h Technical Data – Clamping Unit Clamping force: 1,200 kN Platen size (H x V): 740 x 680 mm Minimum mould height: 300 mm Maximum daylight: 800 mm Opening stroke: 500 mm Ejector stroke: 130 mm Ejector force: 40 kN Movable platen centring diameter: 125 mm Fixed platen centring diameter: 125 mm Mould weight: 825 kg Technical Data – Injection Unit Screw diameter: 35 mm Shot volume: 154 ccm Injection pressure: 1,600 bar Screw L/D ratio: 20 l/d Screw stroke: 160 mm Screw speed: 400 rpm Free injection flow: 151 g/s PS Number of heating zones: 4 Nozzle stroke: 250 mm Dimensions & Weight Machine dimensions (L x W x H): 4.5 m x 2.1 m x 2.1 m Total weight: 7,300 kg Equipment Screen text in German CEE socket 16A Hydraulic core pull, 2x Iijdpeytfgnofx Ak Aef Machine including conveyor belt Machine including safety enclosure Machine without material hopper Levelling elements Interface for ejector plate safety Schuko socket 10A Technical Data – Handling Machine type: Linear Brand: ENGEL Control system: ER-HLI41VC Year of manufacture: 2007