Used Pedax Twinmaster 16 X+ for sale (68,341)

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, 1 used instantaneous steam generator ----- Manufacturer: CERTUSS Type: Junior Performance: 600 kg/h Maximum heat output: 436 kW Operating overpressure: 16 bar Water content: 42.5 l Test pressure: 57 bar CE mark: CE 0035 Year of manufacture: 2006 Equipped with Certuss gas burner, gas control section, Control cabinet, mounted on the boiler body, feed water pump and the existing coarse and fine fittings. Fsdpfxowra S Re Aatepl

Condition: good (used), functionality: fully functional, Plate Rolling Machine XZPP 100/16 Shaft diameter: 100 mm Roll diameter: 450 mm Max. strength of rolled material: 392 MPa Rolling speed: 0-6 m/min Total machine power: 11 kW Machine dimensions (L x W x H): 1570 x 1434 x 1578 mm Fedpfx Aasy D A Nvjtjpl Machine weight: 3950 kg

Condition: good (used), Year of construction: 2003, functionality: fully functional, SOPREM Precision Coil Feeding Line (Decoiler + Straightener) — 2003. Complete matched feeding line for thin precision strip, ready to pair with a small high-speed stamping press. Decoiler — Type H1000.1000ZV. Max coil weight: 1000 kg. Coil Ø: 1000 mm outer / 375–520 mm inner. Reel speed: 2–20 rpm, 1.5 kW drive. Straightener — Type BR 19 . 160 . 12 . U . Strip capacity: up to 0.5 mm thick × 160 mm wide. Hydraulically driven precision straightening unit. Both units built 2003 · 400 V / 50 Hz · synchronized line with E-stop interlink to downstream press · Made in Switzerland. Technical Specifications Decoiler / Coil Reel (Haspel) H1000 / 1000ZV / 10M / LK.LF / N1 / G Serial No. (nameplate): 110103 Max coil weight: 1000 kg Coil outer Ø: max 1000 mm Coil inner Ø: 375–520 mm Reel speed: 2–20 rpm Motor: KSMV 90L (4), 1.5 kW, 1400 rpm Gearbox: RMI 110 FL LCB, ratio i = 70 Slip clutch: set to 400 Nm Strip sensing: floor contact plate (loop control) Precision Band Straightener (Richtwerk) BR19.160.12.U Function: straightens coil curvature before the press Max strip thickness: 0.5 mm Max strip width: 160 mm Drive: hydraulically driven precision straightening unit Fpodpfezav H Sex Aatel Electrical Supply 400 VAC, 50 Hz, 3-phase + neutral + earth Rating: 25 A pre-fuse

Condition: used, Year of construction: 2001, operating hours: 2,500 h, total length: 3,540 mm, total width: 1,500 mm, total height: 2,330 mm, Colour: Grey Weight: 8.230 kg - Year: 2001 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 5356 - Operating hours: 2500 - Drive system: Conventional - Power [kW]: 11.0 - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 160 - Max. working width [mm]: 3100 Fpedpfey Thmxjx Aatsl - Column gap [mm]: 2500 - Backgauge depth [mm]: 750 - Max. stroke [mm]: 200 - Crowning system: None - Punch holder: Standard - Tool holder type: European-style - Tools included: Yes - Transport dimensions: 3540mm x 1500mm x 2330mm (l x w x h) - Transport weight [kg]: 8230kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, table length 2000 mm table width 1000 mm table height 850 mm Vertikal stroke 40 mm weight of the machine ca. 0,38 t dimensions 2,0 x 1,0 x 0,9 m Welding table "SIEGMUND Professional 750 + plasma nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 11.5 - 13.0mm. The holes have a diameter of 16mm. Hole arrangement in 50 mm grid on the table top, parallel hole arrangement in a 25 mm grid on the sides. Including basic equipment. Table height 850mm Fjdpfx Ajgarhksatjpl Accessories shown are optional. Price plus packaging and transport.

Condition: new, table length 2400 mm table width 1200 mm Fpsdpfx Aasgarhnotel table height 850 mm Vertikal stroke 40 mm weight of the machine ca. 0,55 t dimensions 2,4 x 1,2 x 0,9 m Welding table "SIEGMUND Professional 750 + plasma nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 11.5 - 13.0mm. The holes have a diameter of 16mm. Hole arrangement in 50 mm grid on the table top, parallel hole arrangement in a 25 mm grid on the sides. Including basic equipment. Table height 850mm Accessories shown are optional. Price plus packaging and transport.

Condition: like new (used), Year of construction: 2016, operating hours: 6,410 h, load capacity: 1,600 kg, lifting height: 3,140 mm, fuel type: electric, mast type: duplex, construction height: 2,120 mm, Manufacturer & model: LINDE E 16 PL - 386 / 02 evo * EX * Proplan 2G / Zone 1 Mast: 2F3140 ID: 25072.7804 Category: Used Mast: 2F Lowered height: 2120 mm Lifting height: 3140 mm Capacity: 1600 kg Year: 2016 Operating hours: 6410 h Battery: Completely NEW * 48V/625Ah * Year 2025 Fpjdpfx Ajzv Rxtoatjl Options: CONTAINER specs!! * EX * Proplan !!!!! System = INERIS 08 ATEX 3022 X Gas group = IIB Type = Cat. 2G (approved for ZONE 1 and 2) Temperature class = T4 Equipped with: - Complete road lighting - Work spotlights - Joystick control for forward/reverse - 2D - FFL mast - New tyres (ATEX specs)

Condition: like new (used), Year of construction: 2016, operating hours: 6,368 h, load capacity: 1,600 kg, lifting height: 3,140 mm, fuel type: electric, mast type: duplex, construction height: 2,120 mm, Manufacturer + model: LINDE E 16 PL - 386 / 02 evo * EX * Proplan 2G / Zone 1 Mast: 2F3140 ID: 25072.7896 Category: Used Mast: 2F Lowered height: 2120 mm Lifting height: 3140 mm Capacity: 1600 kg Year: 2016 Hours: 6368 hours Battery: Complete NEW * 48v/ 625ah * Year of manufacture 2025 Options: CONTAINER specifications!! * EX * Proplan !!!!! System = INERIS 08 ATEX 3022 X Gas group = IIB Type = Cat 2G (permitted in ZONE 1 and 2) Temperature class = T4 Fpjdezv Rxmepfx Aatsl Equipped with: - Complete street lighting - Spotlights - Joystick control for forward/reverse - 2D - FFL mast - New tires (ATEX specifications)

Year of construction: 2013, condition: ready for operation (used), Connected load: 4kW, weight: 1t. Fpjdpfx Aaohlp Efetel

Condition: like new (used), Year of construction: 2017, operating hours: 5,259 h, load capacity: 1,600 kg, lifting height: 3,140 mm, fuel type: electric, mast type: duplex, construction height: 2,120 mm, Manufacturer + model: LINDE E 16 PL - 386 / 02 evo * EX * Proplan 2G / Zone 1 Mast: 2F3140 ID: 25063.0568 Category: Used Mast: 2F Lowered height: 2120 mm Lifting height: 3140 mm Capacity: 1600 kg Year: 2017 Hours: 5259 hours Capacity: Complete NEW * 48v/ 625ah * Manufactured 05/2026 Fpsdpfxszv Rxae Aatjl Options: CONTAINER specifications!! * EX * Proplan !!!!! System = INERIS 08 ATEX 3022 X Gas group = IIB Type = Cat 2G (permitted in ZONE 1 and 2) Temperature class = T4 Equipped with: - Complete street lighting - Floodlights - Joystick control for forward/reverse - 2D - FFL mast - New tires (ATEX specifications)

Condition: new, table length 3000 mm table width 1500 mm table height 850 mm Vertikal stroke 40 mm weight of the machine ca. 0,8 t dimensions 3,0 x 1,5 x 0,9 m Welding table "SIEGMUND Professional 750 + plasma nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 11.5 - 13.0mm. The holes have a diameter of 16mm. Hole arrangement in 50 mm grid on the table top, Fjdpfx Asgarhroatopl parallel hole arrangement in a 25 mm grid on the sides. Including basic equipment. Table height 850mm Accessories shown are optional. Price plus packaging and transport.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Custom conversion upon request! - Tmax 160°C - Vertical lift door - Internal dimensions (L x W x H): 3300 x 2500 x 1150 mm Fjdpfx Aoxd A N Teatspl - Controller: JUMO IMAGO - Air management: 6 fans, 6000 m³/h per fan - Net weight: 3000 kg - Connected load: 65 kW - Connection: 400V 50Hz-3/N/PE 100A/phase Oven, ovens, industrial oven, preheating oven, drying oven, hardening oven

Condition: like new (used), Year of construction: 2017, operating hours: 3,537 h, load capacity: 1,600 kg, lifting height: 3,050 mm, fuel type: electric, mast type: duplex, construction height: 2,070 mm, Manufacturer + model: LINDE E 16 L - 386 / 02 * EX * Proplan 2G / Zone 1 * Mast: 2F3050 ID: 26083.0458 Category: Used Mast: 2F3050 Lowered height: 2070 mm Lifting height: 3050 mm Capacity: 1600 kg Year: 2017 Hours: 3537 hours Capacity: Complete NEW * 48v / 625ah * Mfg. 05/2026 Fpodjzv R Izspfx Aatsl Options: * EX * Proplan !!!!! System / Certificate = INERIS 08 ATEX 3022 X Gas group = IIB Type = Cat 2G (permitted in ZONE 1 and 2) Temperature class = T4 Equipped with: - CONTAINER specifications!! - Joystick control for forward and reverse - S.s. & 4V - Complete street lighting - Windshield & Roof window - Headlights front and rear - Flashing light - Blue spot light - 2D - FFL mast

Condition: like new (used), pressing force: 50 t, – Capacity: 1600 x 30 tons – NC control (touchscreen) – 2 hydraulic cylinders – Foot pedal operation Fedpfezgf S Ajx Aatspl – Light curtain safety system – Emergency stop – Lighting – Documentation – 400V

Condition: like new (used), Year of construction: 2019, operating hours: 4,788 h, load capacity: 1,600 kg, lifting height: 5,450 mm, fuel type: electric, mast type: triplex, construction height: 2,480 mm, Manufacturer + model: LINDE E 16 PL - 386 / 02 evo * EX * Proplan 2GD / Zone 1-21-22 *Mast: 3F5450 ID: 26084.5626 Category: Used Mast: 3F5450 Lowered height: 2480 mm Lifting height: 5450 mm Capacity: 1600 kg Year: 2019 Hours: 4788 hours Capacity: Complete NEW * 48v / 625ah * Manufactured 05/2026 Options: * EX * Proplan !!!!! System / Certificate = INERIS 08 ATEX 3022 X Type = Cat 2G (allowed in ZONE 1 & 2) Fedpfjzv R Ihex Aatjpl Gas group = IIB Temperature class = T4 Type = Cat 2D (allowed in ZONE 21 & 22 - Dust) Gas group = IIIB Temperature class = T 135 *Equipped with: - Joystick control for forward and reverse - Triplex FFL mast - Complete street lighting - Roof window - Spotlights front and rear - New type display with touchscreen !!!

Condition: new, table length 1200 mm table width 1200 mm table height 850 mm Vertikal stroke 40 mm weight of the machine ca. 0,261 t dimensions 1,2 x 1,2 x 0,85 m Welding table "SIEGMUND Professional 750 + plasma nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. Fodsftd T Sspfx Aatspl The table has a material thickness of approx. 11.5 - 13.0mm. The holes have a diameter of 16mm. Hole arrangement in 50 mm grid on the table top, parallel hole arrangement in a 25 mm grid on the sides. Including basic equipment. Table height 850mm Accessories shown are optional. Price plus packaging and transport.

Condition: like new (used), Year of construction: 2010, operating hours: 7,177 h, load capacity: 1,600 kg, lifting height: 3,140 mm, fuel type: electric, mast type: duplex, construction height: 2,120 mm, Manufacturer + model: LINDE E 16 PL - 386 * EX * Proplan 2G / Zone 1 Mast: 2F3140 ID: 25011.5978 Cat.: Used Mast: 2F Lowered height: 2120 mm Lifting height: 3140 mm Capacity: 1600 kg Year: 2010 Hours: 7177 hours Battery: Complete NEW * 48v/625ah * year 2025 Options: CONTAINER specs!! * EX * Proplan!!!!! System = INERIS 08 ATEX 3022 X Fodpfx Ajzv H Tgjatepl Gas group = IIB Type = Cat. 2G (approved for ZONE 1 and 2) Temp. class = T4 Equipped with: - Complete road lighting - Additional spotlights - Flashing beacon - Joystick control forward/reverse - 2D - FFL mast - New tyres (ATEX specs)

Condition: excellent (used), Year of construction: 2002, 1 used steam boiler Fsdpfxjy H Irus Aatjpl ----- - frame-mounted - - with integrated economiser - Manufacturer: LOOS, Gunzenhausen Model: UL-S 4000 Heating surface approx.: 80 m² Output: 4,000 kg/h Permissible operating pressure: 16 bar Increased test pressure: 30.4 bar Water content at nominal level approx.: 5,930 l Total water content approx.: 8,020 l Year of manufacture: 2002 Equipped with Weishaupt combination burner (gas/oil), RGL 10/1-D, version ZMD, 500 – 4,100 kW, gas control line, separate control cabinet, feed water pump, and existing coarse and fine fittings.

Condition: like new (used), “Parker 16″ x 5″ (400 x 130mm)” for Sale Manufacturer: Parker Inlet size: 16″ x 5″ (400 x 130mm) Electrical Motor: Included Can be sold with or without frame. Crusher is overhauled, sandblasted and painted. Fedpfx Asgw Drxsatspl 6 Pcs. (3 sets) new jaws on stock.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, blade shaft diameter: 240 mm, coil weight: 25,000 kg, type of input current: three-phase, input voltage: 400 V, product width (max.): 1,650 mm, sheet thickness stainless steel (max.): 5 mm, Stainless steel slitting line with NLT slitter-setup-robot — fully functional and in excellent condition. Basic Technical Specifications: - Material: Stainless steel - Material thickness: 0.3–3.5 (5 mm) - Material width: 400–1,650 mm - Line speed: max. 250 m/min. - Coil weight: max. 25 metric tons (unwinding and rewinding) Fpsdpfx Ajztykgjatjl - Coil outer diameter: max. 1,820 mm (unwinding and rewinding) - Coil inner diameter: 508 / 610 mm (rewinding with attachment) - Slitting shaft diameter: 240 mm - Blade diameter: max. 380 mm - Slitter drive: 201 kW - Rewinding recoiler drive: 212 kW Cutting capacity – stainless steel (max.): Thickness 0.3–1.0 mm: 25 strips Thickness 1.0–1.5 mm: 20 strips Thickness 1.5–2.5 mm: 14 strips Thickness 2.5–3.0 mm: 5 strips Thickness 5 mm: 2 strips System consists of: - 4-fold coil magazine - Coil car - Uncoiler with snubber roll – uncoiler movable - Paper winder - Strip edge control - Inserting device with bending roll - Pull-off stand - 5-roll straightening machine - Crop shear with scrap cart - Laminating frame - Slitter - Edge trimmer - 4-position blade changer - NLT slitter-setup-robot PRCS20 - Loop - Braking unit (plate) - Transfer table with separating shaft (automatic) - Recoiler - Coil car - 4-fold turnstile

Condition: used, Year of construction: 2011, Cross-cut and rip saw Manufacturer: HOLZMA Type: HQP 11/16/56/LX Year of manufacture: 2011 Technical data Fpodpfx Aajzuyzzstjl - Combined saw unit with cross-cut saw unit, cutting length 1,600 mm, and rip saw, cutting length 5,600 mm - additional pressure cylinder - postforming unit - waste flap 1600 mm - clamping device for cross-cut saw, 2-finger - automatic ejector guide - roller conveyor designed for 1,300 mm width - second drive in the roller conveyor - 1 m shaking chute 550 mm (driven) - mobile CADMATIC control panel - cooling unit for individual saw - with vacuum loading system and outfeed table Note: The technical data and descriptions are a copy of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2015, operating hours: 3,716 h, load capacity: 1,600 kg, lifting height: 220 mm, fuel type: electric, construction height: 1,250 mm, gearing type: automatic, overall weight: 430 kg, empty load weight: 289 kg, total length: 1,660 mm, color: silver, mileage: 3,716 km, first registration: 09/2015, suspension: other, number of seats: 1, driver cabin: other, wheelbase: 1,304 mm, emission class: none, fuel: electricity, The Still EXU 16 is a reliable and economical solution for daily material transport and offers exactly the features that are crucial in a modern warehouse operation: efficiency, maneuverability, and robust technology. Thanks to its electric drive, the device operates quietly and emission-free, making it ideal for demanding work environments where cleanliness and noise reduction play an important role. The automatic transmission ensures particularly comfortable and intuitive driving, making the forklift easy to operate and allowing work processes to be carried out without interruption. Especially in daily use, with frequent transport movements, the strength of this model is evident through its precise control and safe handling. With a lifting height of 215 mm, it is optimally designed for fast and efficient pallet transport and helps to significantly speed up processes. Fpsdpfjzzfa Aox Aatel Its compact design, with a length of 1,660 mm and a width of only 720 mm, enables confident maneuvering even in narrow warehouse areas. The wheelbase of 1,304 mm also ensures stable and smooth driving, even with intensive use. The 3,716 operating hours demonstrate solid and continuous use and show that this device was designed for practical everyday use. With initial registration in September 2015, this is a proven and well-developed model that has demonstrated its value in practice. This forklift therefore represents a cost-effective investment that optimizes your internal processes, reduces operating costs, and ensures a smooth material flow. With the Still EXU 16, you are choosing a powerful work device that combines efficiency and reliability in a compelling way. Sale only to commercial businesses (agriculture, freelancers, small and large businesses) or for export. Subject to errors and prior sale.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, load capacity per storage section: 3,000 kg, total length: 34,000 mm, total height: 4,500 mm, shelf height: 4,500 mm, number of shelf rows: 4, pallet spaces: 108 euro pallets, frame height: 4,500 mm, frame width: 1,100 mm, load per truss pair (max.): 3,000 kg, shelf length: 8,500 mm, support length: 2,700 mm, 4 rows of pallet racking (4 x M45112711-2) each 8.5 m long, 4.5 m high, 1.1 m deep, each with 3 bays, 2.7 m wide, each with 2 beam levels, load capacity 3000 kg. - 16 upright frames (RM4511 - RAL5019) - 32 base plates, shims, fastening materials - 64 floor anchors (ZZBA1210) - 48 single beams (T27114 - RAL2008) - 4 load capacity signs (BSMcP) Frames are bolted together, not pre-assembled. Fpedsztm H Ujpfx Aatjl Freight/Delivery: - max. 20 working days after payment receipt - delivery to construction site/assembly location is included - unloading from the truck is carried out by the buyer using their own lifting equipment. - deliveries are made throughout Germany; excluding islands! Deliveries to EU countries are made based on individual agreement.

Condition: like new (used), Year of construction: 2015, operating hours: 7,366 h, load capacity: 1,600 kg, lifting height: 3,140 mm, fuel type: diesel, mast type: duplex, construction height: 2,120 mm, Manufacturer + Model: LINDE E 16 PL - 386 * EX * Proplan 2G / Zone 1 Mast: 2F3140 ID: 25012.5143 Category: Used Mast: 2F Lowered Height: 2,120 mm Lifting Height: 3,140 mm Capacity: 1,600 kg Year: 2015 Operating Hours: 7,366 h Battery: Completely NEW * 48v/625Ah * Year 2025 Options: CONTAINER specification!! * EX * Proplan!!!!! System = INERIS 08 ATEX 3022 X Gas group = IIB Type = Cat 2G (approved for ZONE 1 and 2) Temperature class = T4 Equipped with: Fpjdozutu Ujpfx Aatel - Complete road lighting - Additional spotlights - Joystick control forwards/backwards - 2D - FFL mast - New tyres (ATEX specification)

Condition: good (used), Year of construction: 2019, operating hours: 1,367 h, load capacity: 1,600 kg, lifting height: 2,850 mm, fuel type: electric, mast type: duplex, construction height: 2,000 mm, Manufacturer + model: LINDE L 16 i (1173) *EX* Proplan 2G / Zone 1 * Mast: 2W2850 ID: 26083.5803 Category: Used Mast: 2W Lowered height: 2000 mm Lifting height: 2850 mm Capacity: 1600 kg Initial lift: Yes Year: 2019 Hours: 1367 hours Capacity: 24v / 345ah Options: *EX* Proplan !!!!! System / Certificate = EPS 16 ATEX 1137 X Type = Cat 2G (allowed in ZONE 1 & 2) Gas group = IIB Fsdpfx Aaezutwietopl Temperature class = T4 Equipped with: - POWER STEERING - DOUBLE pallet stacker - Initial lift !!