Used Casadei Ps 63 Tersa Sofort Verfügbar for sale (6,632)

Condition: new, mileage: 100 km, power: 350 kW (475.87 HP), fuel type: diesel, overall weight: 18,000 kg, brakes: retarder, color: black, gearing type: automatic, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Equipment list WHEELBASE 5500 MM AIR INTAKE, CORNER-MOUNTED, INTEGRATED IN CAB WATER PUMP, REGULATED INSECT PROTECTION GRILLE, IN FRONT OF RADIATOR HIGH PERFORMANCE ENGINE BRAKE AIR COMPRESSOR, TWO-STAGE, SWITCHABLE FRAME, SCREWED FRAME OVERHANG 1350 MM ADBLUE TANK 75L, LEFT TANKS, LOCKABLE PROTECTIVE CAP FOR ADBLUE DOSING SYSTEM TANK CROSS-SECTION, NARROW TANK CROSS-SECTION, LOW EXHAUST SYSTEM, TAILPIPE TO THE RIGHT OUTSIDE EXHAUST BOX FENDER, FRONT, RIVETED, AERODYNAMICALLY OPTIMIZED FENDER, FOR CHASSIS EXTENSION SPLASH GUARD (EC), FRONT FRONT UNDERRUN PROTECTION (ECE), ALUMINUM BUMPER, CORNERS MADE OF PLASTIC BUMPER, CENTER SECTION WITH TOWING EYE BRAKE SYSTEM CAB TILT MECHANISM, MECHANICAL-HYDRAULIC WINDSCREEN TINTED, WITH BAND FILTER LIGHT SENSOR RAIN SENSOR STORAGE COMPARTMENT, LEFT BELOW CAB ENTRY, LACKED DOOR EXTENSION CAB ENTRY LEFT/RIGHT, FIXED FRONT MIRROR, HEATED MIRRORCAM SUN VISOR, EXTERIOR, TRANSPARENT A-PILLAR TRIM, AERODYNAMICALLY OPTIMIZED OMISSION OF WIND DEFLECTORS AIR HORN, CAB ROOF CLOSING SYSTEM, WITH CENTRAL LOCKING COMFORT CLOSING SYSTEM CAB INTERIOR DRIVER'S AIR-SUSPENDED SEAT, CLIMATE-CONTROLLED PASSENGER FUNCTIONAL SEAT SEAT BACK, UNLOCKING, DRIVER'S SEAT ARMRESTS, ON BOTH SIDES, PASSENGER SEAT SEAT BELT WARNING SEAT COVER, DINAMICA, BLACK, DRIVER'S SEAT SEAT COVER, DINAMICA, BLACK, PASSENGER SEAT SEAT BOX LOW, LOWERED BY 40 MM COMFORT BED, LOWER MATTRESS TOPPER FOR COMFORT BED, LOWER MATTRESS, EXTRA PREMIUM COMFORT, LOWER PREPARATION COMFORT BED, UPPER, WIDE LEATHER STEERING WHEEL AIRBAG, DRIVER FLOOR MAT, ENGINE TUNNEL THE SUNBLIND, 1-PART, ELECTRIC WINDSCREEN BLIND, ACROSS IN FRONT OF BED (EN) SUNBLIND, SIDE, DRIVER AND PASSENGER SIDE REAR VIEW CAMERA, TRACTOR UNIT TACHOGRAPH MANUFACTURER VDO MULTIMEDIA COCKPIT INTERACTIVE 2 PREPARATION REMOTE TRUCK 3.0 APP DIGITAL RADIO J2J SOUND SYSTEM NAVIGATION SYSTEM INTERFACE, FLEET MANAGEMENT SYSTEM EMS REMOTE UPDATE OF DRIVER ASSISTANCE MAP PREREQUISITE FLEETBOARD MANAGER APP PREPARATION FOR WALL FIXING SOCKET 24 V/15 A, REAR SEAT PREPARATION FOR ELECTRICAL EQUIPMENT LED AMBIENT LIGHTING, DRIVING AND LIVING 2 LED WORK LIGHTS, SWAN NECK AUXILIARY HEATER, HOT WATER CAB NOISE AND HEAT INSULATION ELECTRIC STAND-ALONE AIR CONDITIONING SYSTEM CLIMATE CONTROL STORAGE COMPARTMENTS, ABOVE WINDSCREEN, ONE LOCKABLE STORAGE COMPARTMENT COVER, DRIVER AND PASSENGER SIDE DRAWERS, UNDER BED DRAWER, UNDER BULKHEAD SHELVING SYSTEM, FLEXIBLE, FOR STORAGE ABOVE WINDSCREEN TABLE, ON PASSENGER SIDE Y1T NOTEBOOK HOLDER REFRIGERATOR, IN DRAWER, UNDER BED THE COMPRESSED AIR CONNECTION, IN THE CAB ELECTRIC / ELECTRONICS CABLE REMOTE CONTROL FOR AIR SUSPENSION PREPARATION SWITCH, LIFT AXLE, SEMI-TRAILER/ TRAILER PSM 2ND GENERATION E4C ADDITIONAL FUNCTIONS, FOR BODY MANUFACTURER TRAILER SOCKET 24 V, 15-PIN LED DAYTIME RUNNING LIGHT LED HEADLIGHTS INTELLIGENT LIGHT FOG LIGHTS LED PREPARATION, HEADLIGHTS ADDITIONAL, ROOF REAR LIGHTING HARNESS, EXTENDED LED REAR LIGHTS PREPARATION, WORK LIGHTS, CAB REAR LED SIDE MARKER LIGHTS SIDE MARKER LIGHTS, BLINKING PREPARATION ALL-ROUND ROTATING BEACON LED BLINKERS IN LIGHT SIGNATURE PHOTO MERCEDES STAR, ILLUMINATED LIGHTING REGULATION SPEED LIMITER 90 KM/H / 56 MPH, ECE GOT PREDICTIVE POWERTRAIN CONTROL J7V DRIVER ASSISTANCE ATTENTION ASSIST S10 TRAFFIC SIGN RECOGNITION ACTIVE BRAKE ASSIST 6 ACTIVE SIDEGUARD ASSIST 2 FRONTGUARD ASSIST Lhodpfx Ake Aa Hqdjmjn

Condition: as good as new (ex-display), Year of construction: 2026, Combination machine, 4-in-1, HOLZKRAFT CU 410c F 26 N Tersa -- Technical data -- - Circular saw - Reach 2,600 mm Max. saw blade diameter 315 mm Max. cutting height at 90°/45° 100 / 79 mm Max. rip width to the left of the saw blade 2,310 mm Cutting width with parallel guide 900 mm Saw blade tilt 90° - 45° - Jointer - Working width 410 mm Jointer table length 1,660 mm Cutterhead diameter / number of knives 72 mm / 3 pcs. - Thickness planer - Table dimensions 410 x 605 mm Min./max. working height 3 / 230 mm Max. chip removal 4 mm Feed rate 7 m/min - Table router - Usable length of spindle 100 mm Max. tenoning tool diameter 275 mm Lhedpfx Akod Dtc Temjn Max. tool diameter 210 mm Spindle speed 3,500 / 6,000 / 10,000 rpm Spindle diameter 30 mm - General - Motor power 400 V / 50 Hz, 3 x 5.0 kW (6.6 hp) Dust extraction port diameter 4 x 120 mm Dust extraction port diameter, saw blade guard 60 mm - Special offer price - Location: In stock, 54634 Bitburg

Condition: new, Year of construction: 2025, Martin Panel Saw T 77 - New Stock Machine - Top specification - Tiltable to both sides - Equipment: T 7710/2-a Saw Unit Prex – tiltable to both sides T 7725/2-a Cutting height 205 mm T 7720/2-a Drive power 5.5 kW, stepless T 7730/4-a Table length 3.3 m T 7735/3-a Cutting width 1350 mm T 7743-a Electronically controlled parallel fence, lowerable in end position T 7755-a 3-axis scoring unit T 7757-a Scorer illumination Safe Light T 777572-a MITRE cutting system RadioCompens with continuous support T 7780/1-a Rear table extension 610 x 860 mm T 7792/2-a Sensor monitoring for laterally adjustable protection hood 2 x 45 degrees T 7704/2-a ConnectPad 12.9" / 13" T 7704/20-a OtterBox Defender Case T 7706/1-a ConnectApp at operator level Classic Lhsdpfx Aow D T Dkskmjn Location: ex stock 54634 Bitburg - available immediately -

Condition: refurbished (used), Year of construction: 2025, IMMEDIATELY AVAILABLE Studer S20-2 – Mechanically Reconditioned Grinding length: 400 mm Center height: 100 mm Table swivel: 30° Bore diameter: 127 mm Grinding wheel dimensions: 350 x 32 mm Tool holder taper WSS: MK4 (stationary and rotating center) Tool holder taper RST: MK2 Tailstock quill travel: 20 mm Workpiece weight: 20 kg Tailstock with manual runout compensation Further optional features: - Glass scale in X and Z axes - Internal grinding device - Grinding wheel flange - LED spotlight with flexible arm - Coolant system - Safety device Ljdofg Tbrepfx Akmehn

Condition: new, Year of construction: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only attractively priced and space-saving. It also features the equipment you need to process edges perfectly from the start: diamond-tipped joining cutters guarantee excellently prepared workpieces for edge banding. The equipment includes a joining unit (up to 2 mm cutting depth), the top-mounted quick-heating glue tank, a mitre saw, and a combination milling machine. Optionally, the F 2 can also be equipped with a surface scraper blade. Maximum edge thickness: 3 mm Maximum workpiece thickness: 50 mm Lhjdpfx Akslht Hzsmen Ready for operation in 3.5 minutes Equipment: F2 - 10 m/min Edge banding machine F2 next With PLC control (including touchscreen) and hot melt glue application to the workpiece for edge material up to 3 mm; joining cutter (including diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with interchangeable tank provision including glue outlet device, HF mitre saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable plate milling cutter (combination version), robust chain drive, ball-bearing double roller pressure, viewing window from the back of the machine, pull-out workpiece support, feed rate approx. 10 m/min. F2/10 carriage F2/30 pneumatic 3-point adjustment (radius, bevel, flush milling)

Condition: new, Year of construction: 2025, Edge grinding machine with an overhead feed mechanism What distinguishes the Uniq-S from the Uniq is the feed system integrated into the machine table, featuring a rubberized feed belt and an overhead pressure bar. This significantly simplifies the grinding and production of bevelled and chamfered edges, as well as the serial grinding of workpieces. Furthermore, it provides assistance when processing exceptionally large or small parts. The feed speed can be continuously adjusted between 3 and 15 m/min. A soft conveyor belt at the bottom and rubberized rollers on the upper pressure bar gently convey the material. An optional second, lower conveyor belt is also available. The upper pressure rollers can also be replaced with a rubber band, which is particularly helpful when grinding extremely small parts. The Uniq-S is recommended as an all-rounder that enables all types of processing – from solid wood to fine veneer edges – with high quality. The continuously adjustable feed speed allows for optimal adaptation to the material. Lhjdjhqb Rcepfx Akmon 1. Grinding station: “Veneer side” 2. Grinding station: “Solid wood side” 3. Grinding station: “Additional table” 4. Grinding station: “Half-round table” Location: Available from stock in 54634 Bitburg - immediately available -

Condition: new, Immediately available Fassi cranes in the respective versions: - Fassi F135 A.0.24 (4-section hydraulic extension) - Fassi F235 A.2.24 (4-section hydraulic extension) - Fassi F235 A.2.26 (6-section hydraulic extension) - Fassi F255 A.2.24 (4-section hydraulic extension) - Fassi F255 A.2.26 (6-section hydraulic extension) - Fassi F545 RA2.28 (8-section hydraulic extension) incl. additional outrigger beam Each with very good equipment: - Control system for 2 additional functions with »2 hose guides for e.g. grapple or clamp (5th & 6th control circuit), with the exception of the F545 - Hydraulically operated outriggers, operable via remote control - LED work lights - Scanreco remote control with cross lever, charger and carrying straps - Electronic overload cut-out system - Emergency stop and optical alarm (90% and 100%) with adjustable digital swing limiter - FASSI stability control FSC incl. LMB II - From F235 size onwards: double knuckle system with overextending boom up to 15° - Manual extensions for 5th and 6th sections available at an extra cost (can be ordered individually for each crane) - For Fassi F545 series = Includes preparation for winch (the V30 winch can be fully retrofitted at any time) Individual financing is possible with one of our financing partners. This is a non-binding offer. Subject to prior sale, errors and changes. = Further information = Price: On request Ledpozln T Hsfx Akmohn

Condition: new, Immediately available Fassi cranes in the respective variants: - Fassi F135 A.0.24 (4-stage hydraulic extension) - Fassi F235 A.2.24 (4-stage hydraulic extension) - Fassi F235 A.2.26 (6-stage hydraulic extension) - Fassi F255 A.2.24 (4-stage hydraulic extension) - Fassi F255 A.2.26 (6-stage hydraulic extension) - Fassi F545 RA2.28 (8-stage hydraulic extension) incl. additional support outriggers Each with very good equipment: - Control system for 2 additional functions with »2 hose guides for, e.g., grapple or clamp (5th & 6th control circuit), except for the F545 - Hydraulically operated outriggers, controllable via remote control - LED work lights - Scanreco remote control with cross lever, charger, and carrying straps - Electronic overload cut-off system - Emergency stop and optical alarm (90% and 100%), including adjustable digital swing limit - FASSI stability control FSC including LMB II - From F235 size onwards, double knee lever system with over-extension of the boom up to 15° - Manual extensions for the 5th and 6th stages available at an extra cost (can be ordered individually for each crane) - For the Fassi F545 series = Includes preparation for winch (the V30 winch can be fully retrofitted at any time) Individual financing is possible through one of our financing partners. This is a non-binding offer. Subject to prior sale, errors, and changes. = Further information = Lhedpfx Aozln Ttekmjn Price: On request

Condition: new, Immediately available Fassi cranes in the respective variants: - Fassi F135 A.0.24 (4-section hydraulic extension) - Fassi F235 A.2.24 (4-section hydraulic extension) - Fassi F235 A.2.26 (6-section hydraulic extension) - Fassi F255 A.2.24 (4-section hydraulic extension) - Fassi F255 A.2.26 (6-section hydraulic extension) - Fassi F545 RA2.28 (8-section hydraulic extension) including additional support legs Ledezln Tyopfx Akmehn Each with very good equipment: - Control system for 2 additional functions with »2 hose guides for, e.g., grab or clamp (5th & 6th control circuit), except for F545 - Hydraulic outriggers operated via remote control - LED work lights - Scanreco remote control with cross lever, charger, and carrying straps - Electronic overload protection system - Emergency stop and optical alarm (90% and 100%) including adjustable digital swing limiter - FASSI stability control FSC including LMB II - From F235 model size: double knuckle lever system with overextension of the boom up to 15° - Manual extensions for the 5th and 6th section available at an extra charge (can be individually ordered for each crane) - For the Fassi F545 series = includes preparation for winch (the V30 winch can be fully retrofitted at any time) Individual financing is possible with one of our financing partners. This is a non-binding offer. Subject to prior sale, errors and changes. = Further information = Price: On request

Condition: as good as new (ex-display), Year of construction: 2025, Holzkraft FS 30 Classic Tersa Planer-Jointer Lsdpjbuldyefx Akmohn with Tersa cutterhead and planer knives - quick-change system The Tersa planing knife system enables knife changes in seconds and ensures particularly quiet operation. Helically toothed steel infeed roller for consistent and even wood feed. Extra-long planer tables. Large fence can remain in its position when the planer tables are opened. Planer tables open towards the rear. High machine weight. Powerful industrial motor. Robust steel and cast iron construction. Total length of the tables: 1510 mm Feed table length / table height: 740 mm / 850 mm Working width: 300 mm Max. chip removal: 4 mm Dimensions of thickness table: 565 * 300 mm Min./max. working height: 3/230 mm Feed speeds: 7 m/min Planer spindle diameter / planer knives: 72 mm / 3 pcs Speed: 5200 rpm Motor 400V/50Hz/S6 - 40%: 4.0 kW (5.5 hp) Dust extraction nozzle diameter: 2 * 120 mm Scope of delivery: Tersa planer cutterhead Anodized fence Available from stock in Bitburg - immediately available -

Condition: new, Year of construction: 2026, Miter and compound miter saw with a maximum cutting height of 170 mm sturdy cast iron construction precise ball bearing guide for the tool carriage on hardened and ground steel shafts manual saw feed quick miter adjustment up to 65° horizontal adjustable fixed stops lower saw blade guard, can be connected to a dust extraction system Model-----Motor-----Speed-----Cutting length ZS 170: 400 V / 2.0 kW--3500 rpm---410 mm (at 90 degrees) Model-----Cutting height----Miter range horizontal ZS 170 ----- 170 mm----- 45 degrees -90 degrees Model-----Saw blade-----Dust extraction port-----Weight ZS 170 -----420 mm----- 100 mm ----- 120 kg Accessories available upon request: Lodpfscnz N Hjx Akmshn Roller conveyor / fence type RO, RL, RLK, RLH and RLHK for processing aluminum and PVC profiles and for wood profile board processing the modular roller conveyor system can be supplied as: 3 m type RO: infeed roller conveyor with at least 2 support feet 3 m type RLK: roller conveyor fence with a fence slide that can be folded back - Machine stand - Main switch with lock - Infeed roller conveyor Ro-St60 3 meters, right - Roller conveyor RLK-ST60 L 3.0 meters, measuring length Heavy-duty fence/roller conveyor mm - scale on the rear beam, measuring slide with magnifying glass and fence flap - Saw blade 420 x 3.5 x 40 Z 84 Neg Location: In stock at 54634 Bitburg - free loading - - immediately available - Location: In stock at 54634 Bitburg - free loading - - immediately available -

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with XPLANE cutterblock The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the Lsdpfx Akeqlck Njmshn the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: Xplane solid steel cutterblock Cutterblock with 3 spiral rows of knives (33 cambered hard metal knives per row), delivery includes full set of knives and a Torx T20 T-wrench; shaft speed 6,000 rpm included; The emission sound pressure level LpA during processing is reduced by 10 dB(A) - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, table surface precision-planed - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at the infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: new, maximum load weight: 29,731 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,580 mm, loading space width: 2,480 mm, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Brand new Kässbohrer K.SPS platform semi-trailer Immediately available Technical data: * Outer length 13,640 mm * Internal length 13,580 mm * Axle distance 1,310 mm * Wheelbase 7,700 mm * Overall width 2,550 mm * Inner width 2,480 mm * Gooseneck 200 mm * Semi-mounted height 1,180 mm * Axle load 27,000 kg * Kingpin capacity 12,000 kg * Total weight 39,000 kg * Unladen weight 6,269 kg * Pallet capacity 33 Euro pallet load capacity Chassis: * BPW axles with air suspension and disc brakes * 1st axle can be lifted automatically * Wabco brake system * 6 tires 385765 R22.5 * Axle pressure gauge Chassis: * Made of high-quality and durable steel * KTL-coated steel front panel with plywood protection inside with a height of 2,000 mm * Hardwood-coated, 30 mm thick and waterproof hardwood floor, which can take an axle load of 7,200 kg in accordance with DIN EN 283. * Jost supports * LED lighting * Load securing. * K-fix has 96 holes per side, each lashing point has a load capacity of 2,500 kg * Additional 7x2 lashing rings placed on the floor with a load capacity of 5,000 kg * 6x2 container locks suitable for 1x20 ft in the middle, 2x20 ft, 1x40 ft containers * Stake pockets outside + on the floor * Stake box under chassis * Load securing certificate according to standard EN 12642 CodeXL Miscellaneous: * 1x stainless steel toolbox * 4x extra wide boards with LED lighting Lodpfsqbn R Nex Akmjhn Chassis color: MB 7350 nova grey For further information please do not hesitate to contact us

Condition: new, Year of construction: 2026, The VPR-4000 vacuum membrane press is a universal press for woodworking and thermoforming. The VPR-4000 press is also swiveling and mobile. Possible applications: Veneering / Form gluing / Encasing... Coating of various profiles (veneer, paper, plastic...) Wood bending: Production of curved and laminated components Vacuum system: Work surface with vacuum channels for uniform negative pressure, even with large workpieces. Becker vacuum pump / Oil-free / Tank capacity 100 l Work surface: 4000x1500mm Pump power: 0.75 kW Vacuum pump capacity: 40 m3/h Rubber membrane External dimensions: 4100 x 1650 x 1000 mm Weight: 400 kg Location: In stock at warehouse 54634 Bitburg Ledpfeyr R Hwox Akmohn - free loading -

Condition: new, maximum load weight: 27,890 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,530 mm, loading space width: 2,480 mm, loading space height: 2,730 mm, loading space volume: 92 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, Brand new 3-axle Knapen SANH sliding floor trailer * BPW 9-tonne ECO Air HD rigid axle with disc brakes 430, 10-bolt, offset 120 * TireCheck tire pressure monitoring system * Smart Board * 1st axle: lift axle including starting aid * Steel rims with rim size 22.5" x 11.75 * Krone TRUSTED KT 231 385/65R22.5 164J 3PMSF tires * Gearbox-supported winch with thrust compensation * Swinging mud flaps * Plastic tool box 1000x500x500mm * 28 L water tank with soap dispenser * Long aluminum ladder * Extendable stairs with platform at the rear of the trailer * Broom and shovel holder, CARGOFLOOR CF-500 SL-C system, electronic operation * Diamond-patterned aluminum floorboards, 10 mm, 21 boards * Wear plates at the ends of the floor profiles, 350 x 3 mm * Stainless steel plate at the rear under the floor * Platform on the front wall with ladder * Moving bulkhead * Rear doors with external locking bars, one locking bar per rear door * Foldable "A" sign on the left rear door * Tarpaulin with side straps and tensioning ratchets under the trailer * Fixed side on the right, overhang on the left approx. 400 mm * Tarpaulin 900 gr./m2 * 3-position tarpaulin supports (4 pieces) * Side wall protection tarpaulin mounted in the keder on the left side wall, including fixed roll-up mechanism at the front, color: dust gray, RAL 7037 * 2 ECOLED III rear lights, completely LED Lhedoz Ab Thjpfx Akmen * LED side marker lights flash simultaneously with the turn signal * 3 pairs of additional work lights * Acoustic reversing warning * Remote control for floor, lift axle, and work lights * Hydraulic connections on the front wall and at the kingpin supports * Air connection 7.2 mm, "workshop connection" * Tarpaulin similar to RAL 9006 WHITE ALUMINUM * Body RAL 7011 IRON GRAY * Chassis galvanized, not painted * A-frame painted in RAL 7011 IRON GRAY * Also available as a rental vehicle Inquire about our attractive financing options.

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2023 Approximate dimensions: Length: 2,300 mm Width/Depth: 1,100 mm Weight: 980 kg Total table length: 2,300 mm Infeed table length: 1,200 mm Working height: 930 mm Maximum cutting depth: 6 mm Fence length: 1,200 mm Fence height: 190 mm Fence tilting range: 90° - 45° Thicknesser extraction port diameter: 120 mm Main motor: 7 kW Space requirement length: 2,300 mm Space requirement width/depth: 1,610 mm Space requirement explanation: The dimensions include maximum travel paths or usable lengths. Machine body length: 1,235 mm Machine body width/depth: 850 mm Lhodpfjxtgz Eex Akmen Length: 1,000 mm Width: 3,500 mm Note on working area: Please add the specified dimensions to the space requirement to determine the recommended clear installation area for the machine. Minimum working height: 3.5 mm Maximum working height: 250 mm Maximum cutting depth: 8 mm Connection voltage: 400 V Phases: 3-phase Current type: AC Mains frequency: 50 Hz Type: TERSA Diameter: 120 mm Number of planer knives: 4 pcs Speed: 5,000 rpm Maximum planing width: 520 mm Feed speeds: 5/8/12/18 m/min Availability: short-term Location: Solingen

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with Tersa cutterblock The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. Lhsdeqlckpopfx Akmen and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. blocking for easy cutter change - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, finely planed table surface - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2023, New machine Lsdpjw I U Nuefx Akmehn Year of manufacture: 2023 Approx. length: 2300 mm Approx. width/depth: 1100 mm Approx. weight: 980 kg Total table length: 2300 mm Infeed table length: 1200 mm Working height: 930 mm Max. cutting depth: 6 mm Fence length: 1200 mm Fence height: 190 mm Tilting range of jointer fence: 90 - 45° Thicknessing extraction port diameter: 120 mm Main motor: 7 kW Required space, length: 2300 mm Required space, width/depth: 1610 mm Required space explanation: Dimensions include maximum travel distances or usable lengths. Machine body length: 1235 mm Machine body width/depth: 850 mm Length: 1000 mm Width: 3500 mm Working area explanation: Please add the specified dimensions to the required space to obtain the recommended free installation area for the machine. Minimum working height: 3.5 mm Maximum working height: 250 mm Max. cutting depth: 8 mm Connection voltage: 400 V Phases: 3~ Current type: AC Mains frequency: 50 Hz Type: TERSA Diameter: 120 mm Number of planer knives: 4 pcs Speed: 5000 rpm Max. planing width: 520 mm Feed speed: 5/8/12/18 m/min Availability: Short-term Location: Solingen

Condition: new, Year of construction: 2024, Martin T 54 jointer Only with a good surface planer can you create truly perfect foundations. The T54 was developed with precisely this objective in mind. It enables you to easily plane workpieces at the most modern level and to safely provide them with angular edges. The machine is equipped with a TERSA solid steel cutterhead as standard. The Xplane cutterhead, which operates with a drawing cut, is available as an optional extra. Planing bevels is effortless, as any angle between 90° and 45° can be quickly adjusted with the user-friendly one-hand adjustment. The solid cast iron tables of the T54 provide secure support even for large, heavy workpieces. If you need even more support, you can extend both the infeed and outfeed tables by 380 mm each - of course also in cast iron. Ledpfepgkmwox Akmohn Technical data table width: 500mm Table length: 2840mm Maximum chip removal: 8mm cutter: diameter 125mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Motor power: 5,5kW fence adjustable up to 45 Auxiliary ruler for small workpieces Table adjustment motorized Equipment: T 54 T 5462-a Suvamatic T 541-a Tersa knife shaft 4 knives Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Holzkraft Combined Jointer-Planer Machine - available immediately - Ideal for demanding craftsmen and carpenters The particularly long, one-piece jointer tables allow for easy surfacing of workpieces Work tables are made of gray cast iron, making them durable and permanently level Rear-opening jointer tables with spring support for quick and convenient setup changes Thanks to the permanently mounted dust extraction hood, no repositioning of the extraction hose is necessary during setup changes, saving valuable working time Helically toothed steel infeed roller ensures constant and even wood feed Rubber outfeed roller at the planer outfeed ensures even wood discharge Material feed with four speeds Planer table adjustment via handwheel with integrated display for planer height DIGITAL version: with electric planer table height adjustment and digital display On/off switch in operator position Powerful industrial motor The high machine weight ensures maximum precision and smooth operation Preparation for mortising attachment Quality Made in Italy Dimensions and Weights Length approx. 2250 mm Width/Depth approx. 1370 mm Weight approx. 695 kg Jointer Total length of tables 2250 mm Chip removal max. 5 mm Fence length 1200 mm Fence height 150 mm Dust extraction connection Dust extraction port diameter Planer 1 x 120 mm Drive power Main motor 7 kW Installation Information Space requirement Length 2250 mm Space requirement Width/Depth 1440 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Planer Planer table Length 850 mm Planer table Width 520 mm Working height min. 3 mm Working height max. 240 mm Working length min. 220 mm Chip removal max. 5 mm Electrical data Connection voltage 400 V Phase(s) 3 Ph Type of current AC Mains frequency 50 Hz Planer cutterhead Type TERSA Diameter 120 mm Number of planer knives 4 pcs Speed 5000 min¯¹ Planer width max. 520 mm Feed Speed 5/8/12/18 m/min Location: In stock at 54634 Bitburg - available immediately - Lhedpfxjih Dxde Akmen

Condition: new, mileage: 100 km, power: 390 kW (530.25 HP), fuel type: diesel, overall weight: 44,000 kg, axle configuration: > 3 axles, color: yellow, gearing type: automatic, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), parking heater, Available Immediately!!! Vehicle located at Triftstr. 29, 38723 Seesen Specially designed recovery arm with lifting yoke for lifting, towing damaged vehicles, trucks, tractor units, buses, trailers, etc. Complete hydraulic system. 3rd coat of paint HDRV (STANDARD) STORAGE BOXES (inside): yellow RAL 1032 STORAGE BOXES (outside): yellow RAL 1032 LIFTING YOKE: black, powder-coated RAL 9005 RECOVERY ARM: black, powder-coated RAL 9005 REAR SUPPORT LEGS: black, powder-coated RAL 9005 COUNTERWEIGHT (front, under cab, if applicable): black, powder-coated RAL 9005, smooth on the front side. 4. Intermediate frame (STANDARD) - hot-dip galvanized - for mounting the counterweight in the front Lhodpfxoz Sithe Akmjn - rear part painted in body color. 5. Recovery arm (STANDARD) - lifting angle 40° (Fig. HDRV 1013) - mounting plates for main and auxiliary winch - shackles 2x15000kg - left and right side in the rear part of the arm - space for spare wheel holder on the recovery arm. 6. Lifting Yoke (STANDARD) - Area position with respect to the horizontal axis -5° / +10° - Load capacity in retracted state 20000kg - Load capacity in extended state 10000 kg - Extension 3800 mm - Reach to vehicle axle. 7. Hydraulic support legs at the rear (STANDARD) - independently controlled - maximum width -3000mm - rotatable support legs for working on asphalt and on the ground. 8. Hydraulically extendable beam No HDRV 1013 Individual extension 0 - 3000mm maximum payload 2000 - 9000kg 9. Relocation of the tank behind the cab - Relocation of the air tank behind the cab - Relocation of the battery behind the cab - Relocation of the AdBlue tank - Counterweight behind the cab on the frame in the front (weight 100kg) - Main winch COME UP Bison 50, mounted on the recovery arm, pulling force 22.6T - Auxiliary winch COME UP Bison 50, mounted on the recovery arm, pulling force 22.6T. 16. Hydraulic system (STANDARD) - Dual hydraulic pump (STANDARD) - hydraulic control block on the right side (STANDARD) - on right side, in rear storage box. 19. Connections for supplying the braking systems, transferred from the chassis - quick coupling with cable 20 meters - air pressure roller, on the left side of the superstructure, mounted over the rear axles. 21. Electric connector for trailer + trailer hitch, transferred from the chassis - Jump start 12V/24V, cable, lever, mounted on the right side - Jump start 12V/24V, cable, lever, mounted on the left side - Camera + LCD screen in the cab - Camera over winch + LCD screen in the control box SCREEN: - Vibration resistance: 10G - Impact resistance: 100G - Operating temperature: -30 to + 70 ° C - CE marking - EMC approval: E26. Control of EMERGENCY STOP switch - Wireless remote control - 1 function - Made of aluminum - Holder for tools and accessories - Floor with rubber mats - small ladder - Auxiliary ladder in storage boxes. 29. Storage box opening - doors - Railing on storage boxes - stainless steel - Aluminum platform, perforated, mounted on the upper part of the storage boxes - Stainless steel holder in large storage box, behind the cab, for fork, hook, open box. 33. All edges of the storage boxes are finished with stainless steel profiles - Bunk bed mounted in storage box 35. Lighting package complies with road traffic regulations - LED lighting in storage boxes - LED lighting, outside - LED warning light bar GAMET DE LUX, 1800mm - Mounting of the warning light bar on the upper part of the superstructure - Warning light ORANGE BLTZ, 2 pieces - front mou

Condition: new, Year of construction: 2026, The Hebrock F 5 If you want maximum performance, the Hebrock F 5 is the solution for edgebanding in demanding workshops. The F 5 guarantees edge processing in all steps, as it is equipped with all the components you need for your requirements: jointing cutter, miter saw, milling unit, radius pull blade, corner cutter, surface pull blade, and finishing station. For even more flexibility on the way to the perfect finish, the F 5 can optionally be equipped with a practical multi-radius pull blade. Maximum edge thickness: 3 mm Maximum workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: Hebrock F5 Next - 10 m/min Edgebanding machine F5 Next With PLC control (including touchscreen) and with hot melt adhesive application to the workpiece for edge material up to 3 mm; jointing cutter (including diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with interchangeable tank preparation including glue dispensing device, HF miter saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable plate cutter (combination design), corner rounding cutter, radius pull blade, surface pull blade (including pneumatic feed), finishing station, robust chain drive, ball-bearing double roller pressure, viewing window from the back of the machine, pull-out workpiece support, feed rate approx. 10 m/min. Hebrock F5 F5/08/4 Quick-change preparation for corner cutter F5/08/5 additional interchangeable motor for corner cutter with tool set F5/09/4 Multi-radius pull blade (R1/R2) F5/10 Chassis F5/14 additional interchangeable tank F5/24/1 Spray device for release agent F5/24/2 Spray device for cleaning agent F5/25 Spray device for edge F5/27 Nesting for cutter and radius pull blade Lsdpfolht Hwox Akmshn F6/28 Spray texture finish F5/30 Pneumatic 3-point adjustment (radius, bevel, flush milling) F5/31 Jointing up to 50 mm F5/32 LED lighting Location: In stock, 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2026, Adhesive application machine / Adhesive roller machine Brand: ORMA/Osama Type: I/213 (S2R-1300) Working width: 1,300 mm Maximum passage height: 100 mm Speed: 18 m/min Working height: 900 mm Diameter of application rollers: 185 mm Power rating: 0.5 Hp 0.37 KW Lhjdjd Iz Dfopfx Akmen Operating side: right Electrical system: 400 V/50 Hz/3 phases Technical features: - Structure of the adhesive application machine made of welded sheet metal. - 1 motor for driving the two rollers - Adhesive application rollers coated with acid-resistant special rubber, ground to shape and grooved, wear-resistant. - The thickness of the rubber layer can be ground to shape multiple times. - Special dampers on the roller supports, which allow automatic opening of the rollers to compensate for unevenness up to a maximum of 5 mm on the workpieces. - Adhesive dosing via a distribution trough made of zinc sheet. Easily removable for cleaning. - 1 handwheel for adjusting the roller gap - Safety guard for the rollers to prevent accidents - Electrical components according to the highest quality standard - CE standard

Condition: as good as new (ex-display), Year of construction: 2026, Technical specifications: Laminated panel press from our showroom; Working area: width from 150 - 2,550 mm, height from 150 - 1,400 mm, depth from 150 - 700 mm; Variable pressure adjustment 300/700/1100/1400/1800/2200 dN (kg) of the side pressing beam; Variable pressure adjustment 500/800/1200/1500/1900/2200 dN (kg) of the top pressing beam. Simple operation via 6 separate push buttons, freely adjustable pre-selection of pressing time with automatic opening function, loading height 300 mm. The machine is in our showroom and can be delivered immediately. Lhodpob Eln Djfx Akmon Location: available from our warehouse in 54634 Bitburg.

Condition: new, Year of construction: 2026, Weima Single-Rotor Shredder Type WL 6 Power: 18.5 kW Our WL 6 Machine Concept The Weima high-performance shredders, with their flexible application options, can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer remnants, etc.) into fuel chips, achieving an enormous volume reduction of the material, especially with bulky materials. Operating principle: The machine is equipped with a large feed hopper and can be fed by means of a conveyor belt or manually. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without the need for manual assistance. Technical Specifications WL 6 / 18.5 kW Hopper opening: 800 x 1,000 mm Hopper capacity: 0.9 m³ Working width of the rotor: 800 mm Diameter of the rotor: 252 mm Drive power: 18.5 kW Rotor speed: 80 - 120 rpm Number of knives: 42 pieces Type and size of knives: concave / 40 x 40 mm, cutting reversible edges Screen size: 10-60 mm possible (standard 15-20 mm) Paint: WEIMA standard RAL 2002 / 7016 Connection value: 400 V +/- 5% / 50 Hz Weight: approx. 1,600 kg Included: - Control cabinet (Rittal) incl. electrical control (Moeller / Siemens) and star-delta starter - Rubber vibration dampers - V-rotor (patented) with knife pockets milled into the profile - Gearbox end switch Lodpfx Ajh Hnp Dokmohn - Pressing bar - Very robust Weima WAP gearbox - Log spacer (self-cleaning hopper) - 2nd knife row Available from stock in 54634 Bitburg - immediately available -