Used Zebra 96Xiiii Mit Farbbändern for sale (7,281)

Year of construction: 2025, operating hours: 1 h, condition: as good as new (ex-display), Mytho S with TP / Transparent, accessible at ground level with lift trucks and El. lifts. MAST VERSION Winding height 2450 mm 99 program TOUCH display 7" FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) ARYA system for automatic foil blowing and cutting, incl. infrared remote control Psdpsyktrtjfx Abhepu

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Synthesi01, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 2,200 mm Max. pallet dimensions: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,200 mm FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Ppedpeykub Asfx Abhsu Some images may contain options that are subject to a surcharge. Illustration similar

Condition: good (used), 2550 x 880 mm (6 pieces) 2550 x 1090 mm (3 pieces) 1300 x 100 mm driven + 2 pieces without drive (2 pieces) Pedpfx Aoxcufkjbhepu 1300 x 200 mm driven + 1 piece without drive (1 piece) Roller diameter: 60 mm

Condition: used, Size of the roller conveyor: 3300 x 1100 mm speed: 36m/min roller diameter: 65 mm 2 strips: 1050x370mm Ppjdpfxstwnd Dj Abhsu speed: 10m/min

Condition: good (used), 1x Arburg 320C 500-170 with Multilift, safety fence, and discharge conveyor. Sold without Z-belt conveyor, temperature control units, and Koch vacuum loader. The machine is available at short notice by arrangement. Pedjyym Saopfx Abhjpu

Condition: used, Year of construction: 1995, functionality: fully functional, controller model: DNC 80, degree of automation: manual, Jonescheit Hytap 30 with DNC 80 – robust press brake featuring proven control system For sale is a Jonescheit Hytap 30 equipped with DNC 80 control. This is a robust and reliable press brake suitable for use in both workshop and production environments. The machine is designed for precise bending operations and stands out due to its solid construction and user-friendly operation via the DNC-80 control unit. It is an attractive solution for companies seeking a fully functional and immediately available press brake. Specifications: Manufacturer / Model: Jonescheit Hytap 30 Control: DNC 80 Year of manufacture: 1995 Type: manual Condition: used, fully functional Notes: The machine is sold without tooling. Ppsdpfx Abeyxakyeheu Inspection and test run on site are possible. Condition: Used and ready for operation. Conclusion: A solid press brake for operators seeking a field-proven machine with DNC control. Ideal for on-site inspection and functional testing.

Condition: good (used), functionality: fully functional, Technical details: SEW motor Type: DV132H8/4BH/HF/TH Psdpfx Abswu Dbbehspu rpm: 700/1450 IP:54 Hz: 50 400V AC Brake: 400V kg: 83.94 The SEW motor with rotary table is a powerful and versatile drive solution, ideally suited for precise positioning and automation tasks. The motor stands out due to its robust construction and reliable operation, ensuring stable and efficient performance. The integrated rotary table allows flexible and accurate control of movement sequences, making it particularly suitable for use in manufacturing and assembly applications.

Year of construction: 1992, condition: not inspected (used), Bagging machine and net clipper, double unit, manufacturer Strapack, for apples, potatoes, 1-5 kg capacity. Pedpfjhh Idrjx Abhjpu The machine is in very good condition and was in operation for only about 10 years. The machine has 4 bagging stations, which allows for a throughput of approximately 15-20 2 kg bags per minute. The machine is complete with all accessories and ready for operation. The machine has been fully overhauled; price upon request. I am also selling SPARE PARTS for EW20, EW10 and net clippers UC20. If interested, please contact:

Condition: used, 7 Collet sizes: Psdpfx Asbn Rpiobhjpu 7-9-10-12-16-18-20 mm

Condition: new, Pro Sandblaster for Industry Pressure Unit SAPI Mammut Sandblasters with QUICK STOP™ System The SAPI Mammut sandblasters with the QUICK STOP™ system are powerful industrial sandblasting machines, designed for use in industries such as automotive, construction, and manufacturing. These machines ensure fast and efficient surface preparation, cleaning, and treatment of metal, concrete, and other materials. QUICK STOP™ – Safety & Protection The SAPI QUICK STOP™ system is a safety feature designed to prevent accidents and protect the machine from damage. It works by immediately stopping the blasting process as soon as the operator releases the control handle. This instantly cuts off the abrasive flow, preventing potential hazards and protecting the equipment from overuse-related damage. Efficiency & Durability Podpfx Aoupyw Ejbhepu The QUICK STOP™ system reduces air and fuel consumption, making the sandblasting process more efficient and cost-effective. The Mammut sandblasting machine is built for durability, featuring high-quality components that ensure consistent performance, even in harsh conditions. All our machines are fully CE- and TÜV-certified. Flexibility & Versatility The machine is available in different sizes to meet various sandblasting needs. It is compatible with a wide range of abrasive materials, from standard sand to specialized plastic or metallic media. The Mammut with QUICK STOP™ can be used for surface preparation, cleaning, and removing rust, paint, and coatings. Precision & User-Friendliness The Mammut with QUICK STOP™ allows for precise pressure control and adjustment during operation, ensuring consistent results and high accuracy. Additionally, inspection and maintenance access points are designed for easy upkeep. Maximum Safety The QUICK STOP™ system with a dead man’s switch ensures maximum safety during operation. It also prevents moisture buildup inside the machine, as pressure remains constant even when blasting stops—a major advantage over standard on/off blasting systems. Fully Equipped from the Start All Mammut sandblasters with QUICK STOP™ come fully equipped. Our standard package includes: ✔ Sandblasting hose ✔ Nozzle ✔ Pressure control valve ✔ Water separator ✔ Abrasive dosing valve ✔ Basic personal protective equipment

Condition: good (used), Year of construction: 1998, functionality: fully functional, CNC machining center • Homag BOF 321, year 1998 designed for the production of stairs and other components. • Homag PC83 control system • Working area X = 5,200 mm • Working area Y = 1,300 mm • Working area Z = 410 mm • Number of milling spindles: 2 • Milling spindle motors: 12 kW • Maximum speed: 24,000 rpm • Swivel arm: Yes • 4-axis machine • Tool clamping system: HSK-F63 • Two tool magazines: 12 tools each • Double working area • Number of operator consoles: 10 • Vacuum pump: 2 • Vacuum pump capacity: 100 m³/h • Safety device: safety mat • CE marking: Yes Pedpfxox S Ewro Abhepu

Condition: used, functionality: fully functional, Year of construction: 2025, input voltage: 380 V, input frequency: 50 Hz, laser power: 3,000 W, pipe length (max.): 6,000 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Hohe Geschwindigkeit · Hohe Präzision · Hohe Stabilität Diese Maschine verfügt über ein hochpräzises Spannsystem, das speziell für das Rohrschneiden entwickelt wurde. Dank hervorragender Abdichtung und Staubschutz bietet sie eine Spanngenauigkeit von ≤0,1 mm – ideal für die hochpräzise Bearbeitung kleiner Rohre. Das Spannfutter dreht sich mit bis zu 160 U/min und erreicht eine Beschleunigung von 1,5 G. Dies ermöglicht die hocheffiziente Bearbeitung von Rohren mit kleinem Durchmesser. Unterstützt automatisches oder halbautomatisches Laden. Ermöglicht mühelos intelligente und automatisierte Bearbeitung. Ppsdpfx Aswwi H Uobheu Eine Maschine ersetzt drei Mitarbeiter.

Condition: used, Year of construction: 2013, operating hours: 3,000 h, functionality: unexamined, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, For sale as a complete package: Waterjet Cutting Machine STM 3015, year 2013, with computer from 2018 and 3 network dongles for IGEMS software. Working area: 3000x1500mm High-Pressure Pump Ecotron 40.37, year 2013 Water Softening System, year 2018 – like new Abrasive Backwash System, year 2013 Column Slewing Crane Abus 2t, year 2018 – like new Vacuum Lifting Device Devo-Tech, load capacity 1800kg – like new Various accessories and sandbags available The system was purchased at the end of 2018 and commissioned at the beginning of 2019. The waterjet system and pump had been completely overhauled by the supplier at that time. Psdsyq Rdyspfx Abhjpu Unfortunately, the cutting system was hardly used. It only ran for a few hours per year and has not been in operation since about July 2025. The high-pressure pump is defective (leaks water and is not sealed). Both high-pressure cylinders have been replaced in recent years. Last serviced in 2025. According to the service technician, repair of the pump would cost approx. CHF 5,000 to 6,000. The crane and vacuum lifting device can also be purchased separately. Please send your offer with price expectations. In 2019, the new price for the crane and vacuum lifter was around CHF 37,000 incl. VAT. The machine can be inspected during business hours. It is still connected, but has been drained and cleaned. Please arrange appointments or submit offers via email, not by phone.

Year of construction: 1990, condition: used, functionality: fully functional, The machine is in good condition. The milling head is not included. The Wegoma feed unit with standard stand is also included. Ppjdpfx Abeyfxa Eoheu

Condition: new, Year of construction: 2025, This model SGR-1400 is characterized by the removed upper and lower segments and also the bending beam is divided into segments. In addition, treadle is mounted to the opening of the upper bending beam. - Segments of an upper and lower clamping arm extends the application range, - Blockade by means of a pedal, the hands are free and you can freely position a sheet, - Folding machine for universal use in repair, - and body shops, - Compact design, modern shaped, - Manual folding machine for standard tasks, - Segments of an upper clamp enhance the bending ability segmentback width 30,40,50,60,70 and 100 mm - three cheeks are equipped with segment jaws (full segmentation) -application for preset bending angles Technical specifications: - Max. Working width; 1400 mm - Bending angle max. 160 degrees - Max. Sheet thickness (steel) 1.5mm - Weight 285 kg Price: 5.700 Euro Ppodpoc I T Txofx Abhsu

Condition: new, Year of construction: 2025, Multi-use, powerful, heavy and very massive segment folding bench - this is not a typical folding bench - much stronger and more robust. A segment folding bench is characterized by the full segmentation over the entire working length of 1.40M. The upper and lower segments can be removed quickly and easily, and the bending beam is divided into segments. The bending angle is from 0 to 155 degrees. Pedpfxec Swhys Abhepu Lock with the pedal, the hands are free and you can easily position the sheet metal - open and close with your foot. The folding beam is connected to 2 gas pressure dampers, so the control with the folding beam is incredibly easy. Practical tool box on segments at the rear of the machine. Technical specifications: - Max. Working width; 1400mm - bending angle max. 160 degrees - Max. Sheet metal thickness (steel) 1.5mm - weight 300 kg - segment jaws width 30,40,50,60,70 and 100mm - three cheeks are equipped with segment jaws (full segmentation) -Stop for preset bending angles -Gradscala Price: 5700 euros wheels incl. We are looking forward to your contact!

Condition: good (used), Year of construction: 2007, functionality: fully functional, Kolbe MWE-32 Meat Grinder Mixer In good used and working condition. New belt and motor. The machine runs on 400 volts, is made entirely of stainless steel, has a mixing paddle, is 98 cm Enterprise, has been tested in the workshop, and is ready for immediate use. FD 200 loading, built in 2009. The machine is built in 2007. Further information upon request. Pedpfjwcgr Ejx Abhjpu Cash or advance payment. Sale to businesses only. No guarantee. No warranty.

Condition: good (used), Year of construction: 2003, Pallet labeling system for variable labeling of pallets at different heights and from two sides. Pallet labeler type: ZEBRA Xi4 / RXi4 Pedpfx Ajr H D Hgjbhspu The pallet labeler prints and applies labels to the front and/or side of a loaded pallet or other container, thus enabling product identification.

Condition: excellent (used), Interroll roller conveyor 0.99m with drive The Interroll roller conveyor element is in a very good condition. Furthermore, the roller conveyor has its own drive motor. Pjdpfx Ashvmi Tebhspu Width: 400mm Length: 990mm Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High quality industrial machines, lathes, grinding machines, hand machines Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: used, This listing is for a Zebra TLP 3844-Z Printer Ppsdpfjxzhiyjx Abheu

Condition: used, This listing is for a Zebra TLP 3842 Printer. The unit is in full working condition and is ready for immediate release. The Zebra TLP 3842 is a thermal transfer barcode printer designed for high-quality printing of labels, tags, and barcodes. Its advanced technology ensures clear, precise output, making it ideal for various labelling needs. Key Specifications: Print Resolution: 300 dpi resolution allows for high-quality graphics and small text, ensuring legibility and detail. Print Width: Supports a maximum print width of 4 inches, accommodating a range of label sizes. Connectivity: Equipped with multiple interfaces: Parallel, Serial, and USB, providing flexible connectivity options for different setups. Pjdpfx Aexxyl Iobhjpu Memory: 512 KB RAM and 1 MB Flash memory support efficient processing and storage of label formats and graphics. Power Supply: Comes with a U.S. power supply; a dispenser option is also available for added functionality. Real-Time Clock: Note that the printer does not include a real-time clock, which may be relevant for time-stamping labels. Applications: Prescription Bottle Labelling: Ideal for pharmacies requiring accurate and clearly printed labels for medications, ensuring compliance and safety. Laboratory Specimen Labelling: Perfect for labs needing to label samples and specimens clearly, minimizing the risk of mis-identification. Electrical Component and Mechanical Part Labelling: Useful in manufacturing settings for labelling parts and components, aiding in inventory management and traceability.

Condition: used, This listing is for a Zebra DS3678 cordless barcode scanner Pedpfx Ajxv A Tisbhepu The unit is in full working condition and is ready for immediate release. It’s part of the XR (“extra-range”) version of Zebra’s ultra-rugged 3600 series, meaning it is designed for long-distance barcode capture (both 1D & 2D) and tough operational environments. Wireless (cordless) connectivity: uses Bluetooth (Class 1, v4.0 LE) so users can scan without being tethered to a cable. Supports a wide set of barcode symbologies: 1D (Code39, Code128, GS1 DataBar, etc) and 2D (PDF417, DataMatrix, QR Code, Aztec, MicroQR, Chinese “Han Xin”, DotCode) plus Digimarc digital watermark scanning. Extended scanning range: one specification sheet shows “Scanning Distance: 104.99 ft (≈ 32 m)” for the kit version. Rugged build for industrial / warehouse / outdoor use: Drop / shock resistance: e.g., multiple drops from up to ~3 m / 10 ft. Ingress protection: IP65 / IP68 for dust and water (depending on model/config). Good battery life for cordless operation (Li-Ion ~3100 mAh battery). Designed for harsh temperature/humidity environments: e.g., operating temperature down to -20 °C and up p Feedback / user interface: It offers multi-feedback (vibration, LED, beep) so the user knows when a scan is successful even in noisy / vibrating environments

Condition: used, This listing is for 1 of 2 Zebra GK420T Label Printer - Monochrome Ppjdpsxv Ag Aefx Abhou

Condition: used, functionality: fully functional, machine/vehicle number: E2170, Year of construction: 2007, operating hours: 5,430 h, load capacity: 2,500 kg, lifting height: 4,950 mm, fuel type: diesel, mast type: triplex, construction height: 2,150 mm, power: 35 kW (47.59 HP), drive type: Diesel, Diesel forklift Chassis number: E2170 Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: good Front tire type: Solid rubber Podszhdpvjpfx Abhepu Front tire condition: 60 - 80% Rear tire type: Solid rubber Rear tire condition: 40 - 60% Description: Yale GDP25VX diesel forklift – 2.5 tons – Side shifter – Triplex free-lift mast – Year of manufacture 2007 – Operating hours: 5430 – Overall height: 2.15m – Lifting height: 4.95m – Half-cab with roof – Headlights front and rear – 4-cylinder Yanmar engine – 35.8 kW – Solid rubber tires – Front tires: 80%, rear tires: 50% – Good condition – 3rd and 4th hydraulic circuits – Simple and mechanically operated – Original paint Side shifter, 3rd valve, 4th valve, rear work light, front work light, roof cover, half-cab, Half-cab with roof – Headlights front and rear

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 5,739 h, load capacity: 4,000 kg, lifting height: 9,000 mm, fuel type: diesel, mast type: telescopic, construction height: 2,450 mm, power: 75 kW (101.97 HP), empty load weight: 9,445 kg, total length: 5,500 mm, drive type: Diesel, construction width: 2,350 mm, Rigid telescopic handler Mast type: Telescopic Condition: Ready for operation and fully functional Technical condition: Good Front tyres type: Pneumatic Front tyres condition: 80 - 100% Rear tyres type: Pneumatic Psdpfx Aszhdnfjbhopu Rear tyres condition: 80 - 100% Description: Telehandler JLG 4009PS --- TURBO --- Year of manufacture 2011 --- 5,739 operating hours according to the display --- 4 tonne maximum lifting capacity --- Lifting height up to 9 m --- Levelling --- JOYSTICK CONTROL --- Mechanical QUICK COUPLER --- All-wheel steering, front-wheel steering, and crab steering --- 4-speed powershift transmission --- 4-cylinder PERKINS turbo diesel engine, 100 hp --- ALL-WHEEL DRIVE --- 9.4 tonne own weight --- 2.35 m wide --- 5.5 m long --- 2.45 m high --- Includes used pallet forks with SIDESHIFT --- Very good tyres approx. 90% --- Good condition --- Telescopic handler with very robust construction --- NEW bucket available at extra cost Sideshift, Quick coupler, 3rd valve, Heater, Full cab, CE Certificate,