Used Olympus Szh 10 for sale (29,662)

Condition: used, machine/vehicle number: 11327, Year of construction: 2016, operating hours: 570 h, load capacity: 1,400 kg, lifting height: 120 mm, load center: 600 mm, fuel type: electric, mast type: other, construction height: 1,380 mm, battery voltage: 12 V, fork length: 1,200 mm, front tire size: 60 - 80%, rear tire size: 60 - 80%, overall weight: 300 kg, 5007023 Serial Number: 82605051 Psdpjxul A Defx Abpora Battery Details: 2x12 Volt

Condition: reconditioned (used), Tenoning spindle 1 St Number of milling agregates 4 St. Spindle diameter 50 mm Control Weinig, PC-Nexus Weinig Unicontrol 10 CNC - Spindles radially and axially CNC-controlled ----- The machine was factory overhauled by Weinig in 2024. The control panel was also upgraded to a Siemens S 7 677 C, with a new membrane panel "Touch". With the following machining units: Crosscut saw ----- with laser alignment light, motor power 3 kW, spindle diameter 40 mm, spindle speed 3,000 Axially adjustable via NC axis Radial pneumatic adjustment to 8 positions for edge rounding from above Unit from below for edge rounding ----- Axially adjustable with crosscut saw Tenon and slotting spindle ----- Motor power 15 kW Spindle diameter 50 mm Spindle speed 2,925 rpm Tool travel radius min. 380, max. 400 mm Tool clamping length 640 mm Axially adjustable CNC axis Axially adjustable travel 580 mm Adjustment speed 100 mm/sec. 1. Profile spindle (up- and down-rotation) ----- Motor power 11 kW Spindle diameter 50 mm Spindle speed 6,000 rpm Tool clamping length 400 mm with counter bearing Axially and radially adjustable via CNC axis 2. Profile spindle ----- Motor power 11 kW Spindle diameter 50 mm Predsxpi Duspfx Abpsa Spindle speed 6,000 rpm Tool clamping length 400 mm with counter bearing Axially and radially adjustable via CNC axis Profile milling unit horizontally mounted on top ----- Motor power 3 kW Spindle diameter 40 mm Spindle speed 9,000 rpm Pneumatically adjustable to 8 axial and radial positions Profile milling unit vertically mounted on the right side Machine end ----- Motor power 3 kW Spindle diameter 40 mm Spindle speed 5,850 rpm Pneumatic adjustment to 8 axial and radial positions Additional accessories ----- CNC-controlled length stop, mounted on the slotting table for lengths up to 3,500 mm, including a positioned cross-cutting saw integrated into the control system. Studio window device, pivots 60° on both sides Double-part package with automatic separation and transfer Synchronization device with automatic window rebating Rebating carriage for rebating small sash widths Air conditioning unit in the control cabinet PC control NEXUS Automatic turning system Slat conveyor, including conveyor belt for returning the workpieces to the operator (Technical specifications according to the manufacturer - without guarantee).

Condition: used, Year of construction: 2024, operating hours: 317 h, machine/vehicle number: 34300446, used RENNER RS-PRO 11 (10 bar) oil-injected screw compressor including RENNERtronic Touch controller Operating hours: 317 Pressure: 10 bar Rated power: 11 kW Delivery quantity at 10 bar: 1.56 Compressed air connection: G 1/2" Sound level: 74 dB(A) Dimensions L x W x H: 540 x 553 x 1014 mm Weight: 216 kg Freight possible for an additional charge. Visit our store. Prodpewva Akjfx Abpja We always have a large selection of new and used compressors in stock!

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 1 h, Demonstration machine: Psdpfx Aormnp Hjbpora new piston compressor available immediately (Plug and Play): AIRKO MAXXI 5.5 D - 270 ST - 10 bar with standing 270 liter compressed air tank The compressor has 1 operating hour and is available immediately. 2 cylinders Pressure: 10 bar Rated power: 5.5 kW Delivery quantity at 7 bar: 605 l / min Sound level: 80 dB (A) Compressed air outlet: 1/2 " Dimensions length x width x height: 86 x 85 x 210 cm Weight: 113 kg Convenient leasing via our house bank possible. Visit our shop. We always have a large selection of new and used compressors in stock! Immediately available.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 2 h, functionality: fully functional, machine/vehicle number: 20253436, Exhibit in stock immediately available (Plug and Play): RENNER RSK-B 7.5 - 10 bar oil-injected screw compressor with integrated refrigerant dryer with automatic Drain Operating hours: 2 h Year: 2024 Pressure: 10 bar Rated power: 11.0 kW Pjdpfx Astiy Auebpjra Delivery quantity: 1.54 m³ / min Sound level: 81 dB (A) Compressed air outlet: 1/2 " Dimensions length x width x height: 1031 x 572 x 803 mm Weight: 243 kg Visit our store in Erlangen. On more than 450 square meters of exhibition space you will find a large number of used and new compressors.

Condition: as good as new (ex-display), Year of construction: 2024, machine/vehicle number: 21572417, New in stock immediately available (Plug and Play): RENNER RSK-PRO 22 - 10 bar oil-injected screw compressor with integrated refrigerant dryer with automatic drain with controller RENNERtronic touch The new compressor is in stock and available immediately Pressure: 10 bar Rated power: 22 kW Delivery quantity: 3.44 m³ / min Prjdjtzdaujpfx Abpea Sound level: 76 dB (A) Compressed air outlet: 1 " Dimensions length x width x height: 1510 x 747 x 1270 mm Weight: 571 kg Operating hours: 1 Bh Visit our store in Erlangen. On more than 450 square meters of exhibition space you will find a large number of used and new compressors.

Condition: as good as new (ex-display), Year of construction: 2026, Exhibit: Compressor Kaeser SM 10 (10 bar) with SIGMA CONTROL 2 Year of construction: 2026 Operating hours: 0,5 Bh Techn.Daten: Volume flow at 10 bar: 0.78 m³ / min Motor power: 5.5 kW Electrical connection: 400 V / 3/50 Hz Dimension W x D x H: 630 x 790 x 1100 mm Weight: 220 kg Connection compressed air: G 3/4 " Sound pressure level: 62 dB (A) Visit our store in Erlangen. On more than 450 square meters of exhibition space you will find a large number of used and new compressors Podpfxsipm Iyo Abpera

Condition: good (used), Year of construction: 2012, operating hours: 1,340 h, fuel type: electric, color: yellow, Drivetrain Drive: Wheel Weights Empty weight: 2.760 kg Functional Mast: articulated arm Lifting capacity: 200 kg Working height: 1.000 cm Dimensions of cargo space: 265 x 100 x 199 cm Psdpfx Abezayzyopera CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: good Visual appearance: good Other information Remanufactured: Yes Delivery terms: EXW Max. horizontal reach: 300 m Max swing of arm in degrees: 130 Max swing of platform in degrees: 345 Latest inspection: 2026-05-30 Production country: FR Additional information Please contact Rothlehner Arbeitsbühnen GmbH for more information

Condition: like new (used), Year of construction: 2021, machine/vehicle number: see PDF files, FANUC CRX-10iA/L collaborative robot (cobot) – 10 kg / 1418 mm – 05/2021 – first owner, very low use – incl. vacuum gripper + CE base Description: For sale: FANUC CRX-10iA/L collaborative robot (cobot), build date 05/2021, payload 10 kg and reach 1418 mm. From first owner and hardly used. The robot was purchased for a specific application/project, but the concept did not work as intended; therefore the installation was taken out of service and stored in 2021/2022. Including vacuum gripper beam with multiple suction cups as pictured, mounted on a CE-marked base built by Machinefabriek van de Weert (Helmond, NL). Robot specifications: * Make / model: FANUC CRX-10iA/L * Build date: 05/2021 * Payload: 10 kg * Reach: 1418 mm * Robot weight: 40 kg * Type / part no.: A05B-1702-B202 * Serial no.: R2150086C Predpfozq Tzasx Abpja * Software: standard/basic configuration (no upgrades known) Base / installation (integrator): * Built by: Machinefabriek van de Weert – Helmond b.v. (CE) * Year of building: 2021 * Power supply: 230V / 50Hz * Compressed air: 6 bar * Base weight: approx. 150 kg Included: * FANUC CRX-10iA/L robot on base * Vacuum gripper / suction cup beam (as shown) * Cabling / pneumatics as installed * Control/electrics integrated in the system / complete as installed Condition: * Very low use, stored since 2021/2022 * Cosmetic dust/storage marks visible (see photos) * Inspection possible at our warehouse Location & delivery: * Location: Son (near Eindhoven), The Netherlands * Loading available Fixed quick-sale price: € 27,500.- excl. VAT, ex works Son (NL) Contact: Walther van Rooij – Machinehandel van Rooij BV (The Netherlands) Mobile/WhatsApp: E-mail:

Condition: used, functionality: unexamined, overall weight: 7 kg, Ferwood code: RU0011395 - Manufacturer code: 10.F5.CBB-YM00 - Condition: Used - Functionality: Not tested - Compatible machine: - If interested, we offer an overhaul service, please contact us. 7 KG - 46x39x27 Podpfxjyk Dzrj Abpsra

Condition: used, functionality: unexamined, overall weight: 7 kg, Ferwood code: RU0011395 - Manufacturer code: 10.F5.CBB-YM00 - Condition: Used - Functionality: Not tested - Compatible machine: - If interested, we offer an overhaul service, please contact us. 7 KG - 46x39x27 Psdpsyk Dz Ssfx Abpera

Condition: new, functionality: fully functional, Ferwood Code: R21001601 - Manufacturer Code: 503606/12 - Condition: New - Functionality: Fully functional - Compatible Machine: BST100 DRILLING MACHINE - If interested we offer a revision service, contact us. Prjdsvvac Sepfx Abpja

Condition: new, sheet thickness: 10sheet length: 3200Combo Package: CNC Press Brake & Swing Beam ShearFor precise, efficient, and safe sheet metal processing We offer you a powerful complete package consisting of a CNC Press Brake (160t / 3200 mm) and a Swing Beam Shear (10 mm / 3200 mm) – perfectly matched for modern metalworking with high precision and productivity. CNC Press Brake – 160 Tons / 3,200 mmWith 4 CNC axes (Y1, Y2, X, R) & CNC-controlled crowning Standard Equipment:Heavy-duty design for precision bending and long service life CNC axes: Y1, Y2, X, and R – for accurate positioning and repeatability Motorized CNC-controlled crowning system for automatic angle correction ZY 68 CNC controller (similar to Delem) – user-friendly and highly flexible Backgauge with linear guides and ballscrew, equipped with 4 fingers 2 front sheet support arms for ergonomic handling Laser safety guard on the upper beam for operator protection Quick-clamp system for upper tools Tooling system: Promecam/Amada, segmented and gooseneck for flexibility Multi-V die system – compatible with Promecam and Amada CE-compliant safety equipment Swing Beam Shear SWC 3200 x 10 mmWith NC control and motorized backgauge Technical Specifications:Sheet thickness: up to 10 mm, cutting length: 3,200 mm Cutting angle: 1.30°, Motor power: 15 kW Motorized backgauge: up to 1,000 mm Dimensions: L 3,800 × W 1,820 × H 1,920 mm Weight: 7,700 kg Predpfx Aozdwfisbpsa Equipment:Swing beam design for clean and accurate cuts NC control ELGO P40 T, with front-side operation including blade gap adjustment Hydraulic hold-downs positioned close to the cutting line User-friendly control panel on a swivel arm Foot pedal, blade gap adjustment & cutting line illumination Wide sheet support table with ball transfers, 2 front support arms with T-slot Flip-up finger guard, 1 side gauge with T-slot Upper blade reversible 2 times / Lower blade reversible 4 times Adjustable cutting length for efficient operation Qualified customer support, operating manual in English Machine and equipment comply with CE regulations Your Benefit – All-in-One Solution:Perfectly matched machines Time and cost savings through combined package Ideal for workshops, metal fabricators, and job shops Contact us now for a non-binding offer!

Year of construction: 2015, condition: used, Used Machine Year of Manufacture: 2015 Predpfozk Nqkex Abpea with refrigerated dryer Features and Technical Specifications: - Pressure: 10 bar - Suction capacity: 660 l/min - Speed: 1025 rpm - Tank volume: 270 l - Noise level: 78 dB(A) - Effective flow rate: 520 l/min - Air outlet: 3/4"i - Drive power: 4 kW - Air intake capacity: 660 (l/min) - Drive type: V-belt - Tank design: vertical - Power (kW): 4.0 - Voltage (V): 400 V - Starting method: Direct-on-line (DOL) - Compression type: 2-stage - Dimensions: 750x705x1800 mm - Weight: 170 kg With DK 985 Eco refrigeration dryer: - Airflow at pressure dew point 3 °C: 600 l/min - Power consumption: 0.3 kW - Pressure drop: 0.25 bar - Voltage: 230 V - With automatic condensate drain - Dimensions: 325 x 263 x 745 mm - Weight: 25 kg Availability: available shortly Storage location: DE-63934 Röllbach

Condition: excellent (used), Year of construction: 2006, 2006 CIMC 40FT FLATRACK FLUSH FOLDING Stackable Tare weight: 5,100 kg Max payload: 39,800 kg Max gross weight: 50,000 kg CSC: 12/2027 = Further information = Year of manufacture: Dec 2006 Model year: 2006 Tare weight: 5,100 kg Prjdpfxozua Hdj Abpoa Payload: 39,800 kg Gross vehicle weight: 44,900 kg Technical condition: very good Optical condition: very good Please contact Arne Honingh for more information.

Condition: ready for operation (used), functionality: fully functional, !!! We have a shipment of 11 pcs coming in. Price is for one pc only !!! Specially designed for rotary evaporators, distillation, filtration, vacuum ovens and vacuum drying. With chemical-resistant diaphragm vacuum pump and vacuum controller VCpro600. To ensure a freely selectable vacuum of ±1 mbar, the pump speed is continuously adapted to the gas load. Advantages: Faster process results are ensured by constant evaporation and degassing Automatic vacuum adjustment and control Controller with large, multilingual colour display and light/dark screen mode for optimum visibility Integrated solvent library with stored distillation-specific parameters and freely adjustable boiling points; storage of individual pressure curves for novel processes possible With communication interface for remote control/monitoring, for downloading logged process data and for software updates Low-noise operation through speed reduction Technical Information Type LVS 105 T-10 ef+ System LVS 105 T-10 ef+ Suction capacity (l/min) 18.0 End vacuum (abs.) 2,0 mbar Pedpfx Abswvluxepsra Connection for hose inner Ø 8 mm Materials in contact with media pump head: PTFE with carbon fibre reinforcement diaphragms: elastomer with PTFE coating valves: PEEK seals: EPDM screw fittings/connecting elements: PP, PVDF vacuum hose: PTFE Port RS 232, LAN W x D x H 250 x 260 x 435 mm Weight 9,5 kg Mains connection 115-240 V, 50/60 Hz Good working condition. Please check our our other listings as well.

Condition: refurbished (used), Hosokawa Mikropul ACM 10 fine mill / classifier mill with new control cabinet and accessories We are offering a Hosokawa Mikropul ACM 10 fine mill in very good condition - an ideal solution for the precise crushing and classification of powders and granules. Technical data: • Model: ACM 10 • Motor power: 9.2 kW • Condition: Very good condition (refurbished), with newly built control cabinet Additional details: • Classifying sieve available: A subsequent classifying sieve is also in stock. • Comparable mills: We have similar/analog mills in stock that work on the same principle as the ACM 10. Prjdpfxovn Riaj Abpsa Advantages of the ACM 10: • Compact design: Saves space in production • Energy efficient: Optimized for lower power consumption • Flexible use: For processing chemicals, food, pharmaceuticals and more Condition and inspection: The machine would be ready for use quickly and can be inspected by arrangement. We also offer technical accessories and spare parts for seamless integration into your production. Contact us for more information or a customized offer.

Condition: used, mileage: 80,909 km, power: 316 kW (429.64 HP), first registration: 12/2021, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 09/2026, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, Exhaust with ground outlet, rear axle differential lock, multifunction steering wheel, emergency brake, sun visor, driver's air comfort seat, LED daytime running lights, perimeter/beacon lights, RIO Box, Truck Advanced radio with 7'' display including Europe navigation, Lane Guard, air pressure assist, Luis turning assistant HS Olympus Industrial 23 m³ with HS rear loader tipping system Comfortlift type U-K-KL EuroMax, suitable from 80 l to 5 m³, bulky waste collection with folding chute, comfort gearshift, centralized lubrication system. Tipping system lifts approx. 2 t, Welvaarts scale. Prodpfx Abergmm Uspoa

Condition: used, functionality: fully functional, mileage: 15,700 km, power: 183.87 kW (249.99 HP), first registration: 07/2009, fuel type: diesel, color: red, number of seats: 9, From our immediately available stock of used vehicles, we offer you: Fire engine HLF 10 ALL-WHEEL DRIVE 4x2 on IVECO FF140E25 The LF10 is the standard fire engine for rural areas and small towns. It is suitable for both firefighting and technical assistance operations. General data: Podpfx Aboznkkyopjra • First registration: 07/2009 • Mileage: approx. 15,700 km Chassis: • IVECO FF140E25 4x2 with 250 hp (185 kW) • Manual transmission • Trailer coupling Cab: • Standard crew cab (1:8) in RAL 3000 (fire engine red) • Mountings for 2 compressed air breathing apparatus facing forward Superstructure: • Manufacturer: Magirus • HLF10 superstructure according to DIN standard • Three large side equipment compartments on each side • Fold-out steps for the front and rear side equipment compartments • Mountings for standard equipment • Mountings for 2 additional compressed air breathing apparatus Vehicle pump/fire extinguishing agent tank: • Magirus FPN 2000-10 fire extinguishing centrifugal pump • Output: 1,000 l/min at 10 bar • Water tank: 1,000 l • Foam tank: 120 l Firefighting equipment: • Fixed, quick-attack hose reel, long, on top, G6 Safety and lighting • Area lighting on the superstructure • Pneumatic lighting mast We would be happy to provide you with a specific offer and show you the vehicle in detail at our location in Berlin. All information is provided to the best of our knowledge and belief, without guarantee of completeness and accuracy. This advertisement does not constitute an offer, but rather provides information. Subject to prior sale!

Year of construction: 2009, condition: good (used), machine/vehicle number: 133, Offer 18291 Hydraulic horizontal bending and straightening machine Technical data: - Bending force: 100 kN / 10 t Predpog Ewi Njfx Abpoa - Adjustable bending force: 0 - 100 kN - Stroke: 0 - 150 mm - Working width: approx. 200 mm - Stroke speed: 0 - 0.6 m/min - Tool height: up to approx. 100 mm - Bending capacity: - with MW 100 prism, flat material up to approx. 100 x 12 mm - Tube bending up to approx. 1 inch - Straightening capacity Wy at a straightening block distance of 1 m: 100 cm³ - Drive: 400 V / 1.1 kW - Space requirement: approx. W 1100 x H 1000 x D 650 mm - Weight: approx. 400 kg

Condition: used, Year of construction: 2019, operating hours: 1,650 h, Equipment: soot filter, Well-maintained short-tail mobile excavator Komatsu PW 98 MR-10 Technical data: * Engine: Komatsu SAA4D95LE-6 * Engine output: 48.5 kW * Transport length: 6,810 mm * Transport height: 3,100 mm * Overall width: 2,350 mm * Max. digging reach: 7,860 mm * Max. digging depth: 4,055 mm Features include: * Twin tires 8.25-20 with spacers (in good condition) Prsdpfszng Iujx Abpja * Common rail direct injection diesel with cooled EGR technology * Komatsu Diesel Oxidation Catalyst (KDOC), without DPF * 3 travel modes (Creep / Low / High) * Front axle with 6° oscillation, automatic and manual locking * Cruise control * Komtrax stage 4 * Heating and air conditioning * Adjustable driver's seat with seat belt * High-resolution LCD monitor * Offset boom with 1,650 mm dipper arm * Additional 2-way valve with hydraulic circuit switchable to hammer mode * Rear dozer blade (2,350 mm) with cylinder safety valve * Grab pipe * CE conformity * 4 additional work lights on cab roof * Rain protection for windscreen + wiper * Mechanical quick coupler MS08 + lifting hook * Radio * Rear hood with high-resolution reversing camera * Urban reverse warning system Other: * Includes ditch cleaning bucket and digging bucket * Next safety inspection (UVV) due: 10/2026 !!! NOTE: Sale only to businesses and for export !!!

Condition: ready for operation (used), Size max 520 x 250 mm min 240 x 100 mm Book block thickness max 60 mm Pjdpfed Nzwvex Abpora min 5 mm Speed max 20.000 c/h

Condition: like new (used), Year of construction: 2017, load capacity: 1,000 kg, lifting height: 5,350 mm, construction height: 2,900 mm, operating hours: 903 h, fuel type: electric, mast type: duplex, Manufacturer + model: STILL EK-X 10 Mast: 2W5350 ID: 25052.0274 Category: Demo Mast: 2W Lowered height: 2900 mm Lifting height: 5350 mm Capacity: 1000 kg Platform height: 4750 mm Psdpozuucaefx Abpjra Picking height: 6350 mm Initialized: Yes Cabin width: 1200 mm Year: 2017 Hours: 903 hours Capacity: 24 V / 620 Ah Options:

Condition: excellent (used), Year of construction: 2019, operating hours: 1,903 h, lifting height: 1,990 mm, fuel type: electric, total height: 1,940 mm, total length: 1,800 mm, total width: 800 mm, color: other, Empty weight: 728 kg Lifting capacity: 1.000 kg CE mark: yes Technical condition: very good Visual appearance: very good General Country of production: Germany Condition Podsw U Appopfx Abpora CE type: CE

Condition: used, TECHNICAL DETAILS Podpfxjuhaids Abpjra Same as on photos