Used Wpm Wpm 400-C for sale (65,664)

Condition: ready for operation (used), Year of construction: 2001, spindle speed (max.): 4,000 rpm, travel distance X-axis: 410 mm, travel distance Z-axis: 280 mm, spindle motor power: 30,000 W, overall weight: 6,800 kg, number of axes: 2, Horizontal turning machine manufactured in 2001. This Monforts RNC 400 A features a swing over bed of 410 mm and a turning length of 600 mm. It is equipped with a 12-position disc turret and a powerful three-phase induction motor with a speed range of 30-4000 rpm. If you are looking to get high-quality turning capabilities, consider the Monforts RNC 400 A machine we have for sale. Contact us for further details. • Swing over bed: 410 mm • Swing over radial slide: 280 mm • Turning length: 600 mm • Spindle bearing diameter: 130 mm • Spindle nose: DIN 55026 A6 • Bar capacity/material clearance: 65 mm • Main drive: Three-phase induction motor (100% ED/40% ED), 20.5/30 kW • Max. torque: 500 Nm • Feed drive: Three-phase servo drives with electronic safety monitoring • Rapid traverse (X/Z): 24/24 m/min • Feed force (X/Z): 7.2/10.7 kN • Tailstock: On separate guideway, manual clamping, 900 mm travel, 90 mm quill stroke, 12,000 N force Djdpfxsy If A He Aa Nout • Tool turret: 12-position disc turret, DIN 69880 / VDI 3425/2, 40 mm shaft diameter (VDI 40), directional logic and plane gear positioning • Hydraulics: Central pressure oil supply for hydrostatics and clamping; hydraulic hollow clamping device (max 65 mm) • Coolant system: 310 L tank, 3 bar, 40 L/min • Control and features: 256 kB memory (expandable to 1.5 MB), DIN 66025 programming, 2D/3D simulation, RS-232C serial interface, tool compensation (up to 600 tools), constant cutting speed, thread cutting/tapping • Construction: 60° slant bed, steel welded construction on reinforced concrete base with 3-point support; hydrostatic guides (X-axis) • Tool measurement setup • Chip conveyor interface (interface only) • Power supply: 3x400 V (+10%), 50 Hz, total connected load 20.5 kW (41 kVA) Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2000, spindle speed (max.): 4,000 rpm, travel distance X-axis: 410 mm, travel distance Z-axis: 280 mm, spindle motor power: 30,000 W, overall weight: 6,800 kg, number of axes: 2, Horizontal turning machine manufactured in 2000. This Monforts RNC 400 AC features a turning length of 600 mm and a swing over bed of 410 mm. It is equipped with a 12-station disc turret and a maximum spindle speed of 4000 rpm. If you are looking to get high-quality turning capabilities, consider the Monforts RNC 400 AC machine we have for sale. Contact us for further details. • CNC memory: 256 kB (buffered RAM), expandable to 1.5 MB • Programming language: DIN 66 025 with high-level language extensions • Swing over bed: 410 mm • Swing over cross slide: 280 mm • Turning length: 600 mm • Spindle bearing diameter: 130 mm • Spindle nose: DIN 55026 A6 • Material clearance (bar capacity): 65 mm • Max. torque: 500 Nm Duedpfx Aaoy Ifpts Njt • Axes/feeds: AC servo drives with electronic safety monitoring; rapid traverse X/Z 24/24 m/min; feed force X/Z 7.2/10.7 kN • Turret: 12-station disc turret (DIN 69880/VDI 3425/2), 40 mm shaft diameter • Driven tools: 12 stations; max power 13.6 kW (25% ED); max torque 28.9 Nm; max speed 4500 rpm • C-axis: 0–25 rpm; 300 Nm holding torque • Tailstock: Separate guide rail; manual clamping; 900 mm travel; 90 mm quill stroke; 12,000 N force (adjustable); MT3 • Hydraulic system: Central pressure oil supply for hydrostatics and clamping • Cooling: 310 L tank; reinforced coolant pump (3 bar, 40 L/min) • Bed: 60° slant bed; steel welded construction on reinforced concrete base with 3-point support • Power requirements: 3x400 V, 50 Hz; total connected load 20.5 kW (41 kVA) Additional equipment • Hydraulic hollow clamping device • Parts catcher • A6 drawtube for collet chuck • 200 mm suction nozzle • 1 GB storage expansion • Network card • Driven tools with tapping without compensation chuck Technical Specification Counter Spindle No Driven Tools Yes

Condition: used, Year of construction: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTIONAL TABLE - WORK CELL VERSIONX400 CELLDrilling and milling made for you!The numerically controlled machining center is equipped with a wide range of milling/drilling tools to meet every need in the processing of wood and similar materials.- More powerful, with drilling spindles with 8,000 rpm and . Technology, the toughest spindle available on the market, with over 1,000 maintenance-free hours of use. Better and more comprehensively equipped, with various configuration options thanks to the multifunctional table to optimally equip the machine according to your needs. Easier and more understandable programming thanks to the integrated MAESTRO CNC CAD-CAM module. Easier to use: the work table is accessible at all times, the electrical cabinet and vacuum pump are integrated, and in the PRO SPACE configuration there are no guards. Supporting structure. The supporting structure consists of a particularly strong monolithic steel base, heavily ribbed and very rigid. The particularly wide support was specifically designed to give the machine stability, ensuring consistent precision regardless of the working conditions and eliminating the need to anchor the machine to the floor. The base forms a large and solid support for the mobile column: the work unit is thus equipped with a balanced, stable, and durable support that can withstand the most extreme stresses, ensuring higher quality performance and greater precision. The mobile gantry consists of a single, solid unit anchored to the base on both sides and slides on pyrotechnic guides with top-quality ball-return slides. The dual motorization along the X-axis ensures top performance even under demanding working conditions. The movement of the lower moving unit (X-axis) and the working unit along the rod of the moving unit (Y-axis) is achieved thanks to a rack/pinion transmission with helical teeth. this creates a greater tooth-to-tooth thrust which achieves greater acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures absolute quality of finishes as any vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters; These ensure: - Reduced processing times thanks to improved acceleration - Better positioning accuracy thanks to the high-resolution encoder - Zeroing of setup operations when switching on the machine thanks to absolute encoders - Zeroing of general maintenance operations since there are no brushes with the "brushless" system The management of the axis displacement and, in general, of the machine's working elements is carried out by an industrial NS module with digital D Duedpfjvvi N Isx Aa Not

Condition: good (used), Year of construction: 2014, spindle turning speed range 170 - 18000 U/min weight of the machine ca. 7,5 t dimensions of the machine ca. 5,00 x 4,00 x 2,20 m --> Control conversion (2014) to Siemens Sinumerik 840D Solutionline --> Overhaul of the new control system in 2016 --> Technical data Grinding diameter: 20 - 300 mm --> Oscillation diameter: 350 (500) mm --> Workpiece length: 300 (1300) mm --> Recommended grinding depth up to: 300 mm --> Grinding table stroke Z-axis (total): 650 (950) mm --> Resolution: 0.001 mm --> Rapid traverse: 12 m/min-1 --> Grinding stroke speed: 0 - 9.99 m/min-1 --> Feed rate: 0 - 99.99 m/min-1 --> Step feed value during reversal: 0 - 0.999 mm --> Grinding table stroke X-axis (total): 150 mm --> Resolution: 0.001 mm / Ø --> Rapid traverse: 5 m/min-1/R --> Grinding stroke speed: 0 - 5 m/min-1/R --> Feed rate: 0 - 99.99 m/min-1/R --> Step feed value during reversal: 0 - 0.999 mm / Ø --> Swivel capability of the workpiece headstock: --> B-axis: -32° (-23°) / +2° --> Resolution: 0.0001° (0.36") --> U-axis stroke (total): 300 mm --> Resolution: 0.001 mm / Ø --> Travel speed: 5 m/min-1 Dujdpjw Intaofx Aa Nst --> Centre height above workpiece table: 200 (300) mm --> Centre height above grinding table: 330 (430) mm --> Workpiece spindle passage: 50 (70) mm --> new in 1988

Condition: used, all stainless steel hopper capacity 270L die width 400 mm usable die surface 370 x 130 mm maximum volume per stroke ± 1,47 kg maximum 50 strokes / minute (Depending on the product, shape, temperature and machine settings) total power 8 kW air consumption ± 300 L / min. mobile variable speed 3x400v 50hz dimensions (l x w x h) : ± 2.200 x 1.000 x 2.100 mm weight 1200 kg PLC control with “bridge breaker” in good condition in good working order + Shuttle conveyor belt “GEA” Type SHC 1000/600 all stainless steel adjustable speed mobile infeed belt width 600 mm outfeed width 1.000 mm overall dimensions (l x w x h) : 2.700 x 800 x 1.100 mm Dsdpfx Aajy Izi Ne Njut

Condition: new, Year of construction: 2025, functionality: fully functional, turning diameter over cross slide: 235 mm, spindle bore: 52 mm, turning diameter: 400 mm, center height: 200 mm, turning length: 1,000 mm, Lathes Series PREMIUM CU 400 RD-Vario Our universal lathes and lathes with stepless speed control from the PREMIUM CU series feature a wide range of features and accessories for customers across various industries. The PREMIUM CU series allows precise adjustment of cutting speed to suit material and turning diameter – especially advantageous for non-ferrous metals, plastics, and for achieving perfect surface finishes on precision parts and fits. A notable highlight is the integrated R/L control units mounted on the tool slides, enabling simple switching between clockwise and counterclockwise spindle rotation. These replace the conventional shift rods typically found on universal lathes. The machine is equipped with electromechanical spindle brakes for extremely fast spindle stops, ensuring efficient handling. The leadscrews are fitted with overload protection. Performance Data and Specifications: Center distance: 1000 mm Center height: 200 mm Swing over bed: 400 mm Swing over cross slide: 235 mm Swing without bridge: 550 mm Bed width: 320 mm Cross slide travel: 235 mm Top slide travel: 110 mm Maximum turning tool cross-section: 25x25 mm Chuck mounting: DIN 55027 No. 6 Spindle (main spindle) taper: MK 6 mm Spindle bore: 52 mm Speed Range 1, stepless: 18 – 98 rpm Speed Range 2, stepless: 48 – 265 rpm Speed Range 3, stepless: 144 – 790 / 385 – 2120 rpm Longitudinal feeds (80): 0.015 – 0.6 mm/rev Cross feeds (80): 0.0075 – 0.3 mm/rev Metric thread pitch (40): 0.25 – 7.5 mm Metric module threads (40): 0.0625 – 1.875 mm Inch threads, TPI (40): 120 – 4 TPI Inch module threads, TPI (40): 480 – 16 TPI Tailstock quill taper: MK 4 Tailstock quill diameter: 50 mm Tailstock quill stroke: 100 mm Motor power: 7500 W Power supply: 400/50 V/Hz Total length: 2350 mm Total height: 1330 mm Weight: 1590 kg Standard Equipment: Duodpfx Aasy Hlxfs Not - RÖHM 3-jaw chuck - 5-piece quick-change toolholder set - Halogen machine lamp - Emergency stop button / no-voltage release - Chuck guard with safety switch - Tool slide with splash guard - Machine base / chip tray / splash wall - Tool set / operating manual / CE PREMIUM CU Series Standards: - Heavy-duty grey cast iron machine bed, excellent vibration damping - Removable bridge - Prismatic guideways - Hardened and precision-ground main spindle, high concentricity, adjustable precision bearings - Smooth-running main spindle and feed gearbox in oil bath - Gears made of case-hardened chromium-nickel steel, hardened and precision ground - Feed reverse function - Covered trapezoidal thread leadscrew, hardened, precision ground - Tool slide with locking nut - Precisely adjustable slideways - Solid tailstock with offset - Machining accuracy according to DIN standards Including 3-axis digital position display This machine is available for immediate delivery and can be viewed at our showroom in 71334 Waiblingen-Beinstein. For information on equipment, please contact us.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 60,672 h, clamping force: 4,000 kN, screw diameter: 80 mm, total height: 2,360 mm, overall weight: 11,000 kg, product length (max.): 7,420 mm, This Engel DUO 3550/400 pico was manufactured in 2013. It features a clamping force of 4,000 kN, a screw diameter of 80 mm, and a maximum injection volume of 1,960 cm³. The machine dimensions are 7,420 × 2,360 × 2,360 mm, and it weighs 11,000 kg. It is equipped with a robot interface Euromap 67. Contact us for more information about this machine. Djdpsx Nr Ryofx Aa Njut • Operating hours: 60,672 h • Condition: Excellent • Status: In production • Maximum injection volume: 1,960 cm³ • Minimum mould height: 350 mm • Maximum mould height: 850 mm • Platen opening stroke: 1,050 mm • Platen dimensions (W × L): 1,100 × 1,190 mm • Tie-bar distance: 800 × 800 mm • Motor power: 70 kW • Heater power: 52.95 kW • Number of electrical connection pins: 32 • Injection nozzle radius (tip): R35 • Centering ring diameter: 200 mm • Number of cores: 0 • Number of heating zones: 0 Additional equipment • Robot equipped: Yes • Robot interface: Euromap 67

Condition: new, Year of construction: 2025, Cutting length: 3200 mm Cutting width at rip fence: 1250 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 125 mm Scoring unit: yes Saw blade height adjustment: electric / NC control Saw blade tilt adjustment: electric / NC control Rip fence adjustment: electric / NC control Saw blade angle display: digital Cutting height display: digital Dsdpfxexzfwuj Aa Neut Rip fence display: digital Crosscut fence display: digital Saw blade diameter: 400 mm Motor output: 7 kW Motor brake: yes / automatic Extraction port: 80 mm and 120 mm Machine length: 3400 mm Machine width: 2000 mm Weight: 1025 kg

Condition: good (used), 1 used MIG MAG welding machine Manufacturer: Lorch Model: Micor Mig 400 Welding range 3~ 400 V [A]: 30 - 400 Voltage range [V]: 15.5 - 34 Weldable wires steel [Ø mm]: 0.6 - 1.6 Weldable wires stainless steel [Ø mm]: 0.8 - 1.2 Weldable wires aluminium [Ø mm]: 1 - 1.6 Weldable wires CuSi [Ø mm]: 0.8 - 1.2 Voltage adjustment: stepless MIG-MAG duty cycle Duty cycle 100% (40°C) [A]: 300 Duty cycle 60% (40°C) [A]: 370 Duty cycle at max. welding current (40°C) [%]: 45 Electrode welding Welding range 400 V [A]: 10 - 400 Voltage range [V]: 20.4 - 36 Weldable electrodes [Ø mm]: 1.5 - 8 Electrode duty cycle Duty cycle 100% (40°C) [A]: 290 Duty cycle 60% [A]: 370 Duty cycle at max. welding current (40°C) [%]: 45 General specifications Open-circuit voltage [V]: 76 - 83 Standard wire feed speed [m/min]: 1 - 25 Power supply: 400 V Mains voltage 3~ (50/60 Hz) [V]: 400 Mains fuse 3~ (50/60 Hz) [A]: 32 Max. positive mains tolerance 3~ (50/60 Hz) [%]: 15 Dujdpsy Hfwnefx Aa Nst Max. negative mains tolerance 3~ (50/60 Hz) [%]: 15 Power plug: CEE 32 Standards and certifications Protection class: IP32S Insulation class: F Standard: EN 60974-01 Markings/Certifications: CE, S Cooling type: Gas-cooled, water-cooled Cooling Standard cooling capacity (l/min) [kW]: 1.06 Tank capacity [l]: 4.3 Dimensions (L x W x H) [mm]: 880 × 490 × 885 Case dimensions (L x W x H) [mm]: 575 × 245 × 434 Weight [kg]: 61

Condition: excellent (used), Year of construction: 2013, screw diameter: 22 mm, injection pressure: 2,000 bar, injection weight: 31 g, Arburg 270C 400-70 Golden Edition Dusdoy I Uzxspfx Aa Njt Clamping force: 40 t Year of manufacture: 2013 Injection weight: 31 g Injection unit: .../70 Screw diameter: 22 mm Specific injection pressure: 2000 bar Injection volume: 34 ccm Injection weight: 31 g Clamping system: 400/... Clamping force: 40 t Platen dimensions: 446 x 446 mm Mould height: 200 mm Opening stroke: 350 mm Max. platen distance: 550 mm Ejector stroke: 125 mm General data: Control system: Selogica Equipment: 2 x pneumatic valves 2 x hydraulic cores Multilift robot 3 hot runner zones Rotameter

Condition: like new (used), Year of construction: 2022, operating hours: 4 h, functionality: fully functional, type of input current: three-phase, total height: 960 mm, total width: 560 mm, total length: 1,040 mm, overall weight: 130 kg, warranty duration: 6 months, electrical fuse: 400 A, Equipment: documentation/manual, The equipment has been checked by an authorized service center and is ready for operation. Condition: Almost NEW (used 4h) Warranty of 6 months Model: EWM Titan XQ R 400 AC puls Welding current range: 20 – 400 A Duty cycle (40 °C): 400 A (eta) 100% Power supply: 3~ 400 V, 50/60 Hz Processes: MIG/MAG standard, pulse, double pulse, forceArc, rootArc, AC Arc TBI BRG-2-ES-DEA attachment for automatic cutting and nozzle cleaning. Wire diameters: Steel: 0.8 – 1.6 mm Aluminium: 1.0 – 1.6 mm Cooling: Water-cooled (integrated cooling unit) Dujdpfoxdncxex Aa Njt Efficiency: >90% Dimensions (L×W×H): approx. 960 × 560 × 1040 mm Weight: approx. 130 kg Robot Interface Equipped with robotic interface (digital/analog I/O and Fieldbus options). Compatible with major robot brands: ABB, KUKA, Fanuc, Yaskawa, Panasonic, Kawasaki, OTC. Full integration possible – process parameters controllable directly via robot controller. German quality – designed for continuous industrial use. AC/DC pulse technology for aluminium and non-ferrous metals. Large database of synergic programs for easy setup. High energy efficiency, reduced operating costs. Ready for manual welding or complete robotic integration. Mobile trolley with 4 wheels for easy handling.

Condition: new, functionality: fully functional, fuel type: electric, color: other, Year of construction: 2026, Our 400 Ton/Hour Capacity Stationary Crushing and Screening Plant consists of 40 m³ vibrating feed bunker, wobbler feeder, CLK-110 jaw crusher, impact crusher, tunnel systems, stock and return belts, stock bunkers, control cabinet and automation system. The products transferred to the feed bunker are separated from dirt and mud in the first stage of the double-stage wobbler feeder and bypassed by the bypass belt conveyor In the second stage of the wobbler feeder, the products that are suitable for the jaw crusher are sent to the stock area with the transfer belt. The jaw crusher, with a maximum feed of 800 mm, crushes the products and sends them to the fist vibrating screen. In the first vibrating screen, the products are separated in 0-40 mm, 40-90 mm sizes and sent to the stock area. Products above 90 mm size are transferred to the secondary crushing and screening unıt. The products transferred to the tunnel system are sent to the 12-13 S impact crusher. Dujdey Db Rrjpfx Aa Njt The products crushed in the impact crusher are separated in different sizes by vibrating screen and sent to the stock area. The products stored in the stock area are transferred to the pan feeder by passing through the tunnel system according to the need. The vibrating pan feeder transfers the products to the stock bunkers with the transfer belt conveyor All equipment of the crushing &screening plant is controlled from 3 different automation panels.

Condition: used, all stainless steel mobile with outfeed conveyor belt width 400 mm Duodpjy Ichmefx Aa Njt dimensions: (L x W x H): ± 2.390 x 800 x 2.285 mm power 13 kW weight 850 kg

Condition: used, mileage: 7,353 km, power: 330 kW (448.67 HP), first registration: 02/2023, fuel type: electric, maximum load weight: 14,245 kg, overall weight: 27,000 kg, axle configuration: 6x2, wheelbase: 4,900 mm, color: black, driver cabin: day cab, gearing type: other, emission class: euro6, suspension: air, loading space volume: 46 m³, loading space length: 7,600 mm, loading space width: 2,450 mm, loading space height: 2,490 mm, Year of construction: 2022, Equipment: ABS, air conditioning, cruise control, navigation system, onboard computer, tail-lift, traction control, This offer is non-binding. Errors and prior sale excepted. If a foreign currency is indicated, it is calculated at the current daily exchange rate. The currency valid is that of the vehicle location. Predictive Powertrain Control, front axle with air suspension, front axle 8.0 t, trailing axle, 8 t, steered, unloadable, liftable, cable remote control for air suspension, air suspension, rear axle, axle load monitoring system, tire pressure monitoring system, electronic parking brake, wheelbase 4,900 mm, M cab, M cab, cab width 2.30 m, tinted windscreen with band filter, heated, comfort central locking system, roll stabilization assist, smoke detector in the cab, lower bunk, automatic climate control, driver's air-sprung seat, air conditioning, passenger air-sprung seat, air conditioning, electronic braking system with ABS and ASR, reversing warning system integrated with hazard warning lights, rain sensor, bi-xenon headlights, automatic main/dipped beam and cornering light, fog lights, LED daytime running lights, lane keeping assist, distance control assist, attention assist, traffic sign assist, blind spot assist, cruise control, comfort telephony, wireless charging, navigation system, tail lift: Dautel DL 1500S, 1,500 kg with roll-off protection. Dsdpfxoy Nf R Hj Aa Nout

Year of construction: 2010, condition: ready for operation (used), A Kodak thermal computer-to-print system with peripheral devices is available. Workflow: Prinergy EVO RTPO, laser wavelength: 830nm, imager sides: 6, cassette drawers: 3, punching heads: 4, max. plate dimensions X/Y/Z: 762mm/685mm/228mm, resolution: 3048dpi, screen ruling: 250lpi, repeat accuracy: +/-5µm, production capacity: approx. 17plates/h, max. cassette capacity: 180. System dimensions X/Y/Z: approx. 3350mm/1850mm/1850mm, weight: approx. 2000kg. Including a multi-cassette unit MCU U/G, 6-side thermal platesetter Magnus 400 II S, plate transport unit, plate stacker transfer, printing plate stacker 860, Kodak Compressor with Atlas GX2FF and washout unit with collecting tray Agfa Azura C 95. The autoloader has a suction problem with the printing plates. Documentation available. An on-site inspection is possible. Dedpfoy N Uxaex Aa Nout

Condition: new, Year of construction: 2026, machine/vehicle number: H4-400_1, functionality: fully functional, power: 30 kW (40.79 HP), pressing force: 400 t, stroke length: 300 mm, operating speed: 100 mm/s, reverse speed: 80 mm/s, table width: 4,100 mm, throat depth: 400 mm, clearance between the columns: 3,600 mm, oil tank capacity: 180 l, total length: 6,150 mm, total width: 2,700 mm, total height: 3,400 mm, overall weight: 23 kg, Equipment: CE marking, documentation/manual, safety light barrier, Cone H4-400 Hydraulic Press Brake - DA-66S CoastOne - Finland Technical Specifications Cone H4-400: Bending force: 400 tons Bending length: 4100 mm Cylinder spacing: 3600 mm Stroke: 300 mm Width: 500 mm Throat depth: 400 mm Table height: 985 mm Length: 6150 mm Width: 2700 mm Height: 3400 mm Approach speed: 100 mm/s Return speed: 80 mm/s Bending speed: 10 mm/s Oil tank: 400 l Weight: 22.5 tons Main motor: 30 kW Standard Equipment: - CNC-controlled X, R, Z1, and Z2 axes - 2 backgauge fingers - Delem DA-66S Graphical Control - CNC-controlled crowning device type 1 Dujdpey Efczjfx Aa Njt - AMADA Promecam tool holder - LazerSafe LZ2 front safety laser + PLC + rear light curtain - Standard punch and 4V die - Integrated LED lighting on the ram as front lighting Delem DA-66S Graphical Control: - 24-inch high-resolution touchscreen - 2D graphical programming interface - 3D machine visualization in simulation and production - Supports 3- to 8-axis control - Includes offline programming software Profile-T Lite – T2D - USB and peripheral interfaces - User-specific application support in the control's multitasking environment - Interface for sensor bending and automatic angle correction

Condition: ready for operation (used), ASYST CNC Profile Dressing Device Model: APNC 400 Duodpfxoy Edc Te Aa Net Year of manufacture: 2003 Device is operational; offered as a spare or for parts harvesting.

Condition: ready for operation (used), Year of construction: 1997, travel distance X-axis: 620 mm, travel distance Z-axis: 2,000 mm, bar diameter (max.): 110 mm, controller manufacturer: SIEMENS, controller model: 840C, number of axes: 3, Horizontal turning machine manufactured in 1997. This BOEHRINGER VDF 400 CM features a maximum chuck diameter of 500 mm, an X-axis travel of 620 mm, and a Z-axis travel of 2000 mm. It is equipped with a live tool for enhanced functionality. If you are looking to get high-quality turning capabilities, consider the BOEHRINGER VDF 400 CM machine we have for sale. Contact us for further details. • Chuck: 500 mm Dusdpfx Aajy Enyio Njt Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 850 mm, travel distance Z-axis: 315 mm, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 3, Vertical turning machine manufactured in 2000. This EMAG VSC 400 features an X-axis travel of 850 mm and a Z-axis travel of 315 mm. It is equipped with live tools for enhanced functionality and track motion loading for efficient operation. If you are looking to get high-quality turning capabilities, consider the EMAG VSC 400 machine we have for sale. Contact us for further details. • Track motion loading (automation/loader) Dusdpoy Enpkefx Aa Nst Technical Specification Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 620 mm, travel distance Z-axis: 2,000 mm, bar diameter (max.): 110 mm, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 3, Horizontal turning machine manufactured in 2007. This BOEHRINGER VDF 400 CM features a 500 mm chuck and a live tool for enhanced versatility. It offers an impressive X-axis travel of 620 mm and Y-axis travel of 2000 mm. If you are looking to get high-quality turning capabilities, consider the BOEHRINGER VDF 400 CM machine we have for sale. Contact us for further details. • Chuck diameter: 500 mm Duodsy Enllopfx Aa Njt Technical Specification Driven Tools Yes Counter Spindle No

Condition: good (used), Year of construction: 2011, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 680 mm, Tool holder: HSK 63 Turning spindle: 85 Spindle speeds: 20,000 rpm Chain magazine: 60 positions Chip conveyor Pallet changer Coolant filter unit High-pressure coolant through spindle Dedpfxjy Iyqlj Aa Neut

Condition: ready for operation (used), functionality: fully functional, The line will remain in operation until mid-July. The system consists of an X-ray machine (GreCon), cross-cut saw (GreCon), packaging unit, KZF, cross conveyor, and KZP (all GreCon). Achieved output: With an average board length of 3.74 m, output in 8 hours is approx. 10,000 linear metres of spruce. Dodpsy N Uu Isfx Aa Neut With an average board length of 2.43 m, output in 8 hours is approx. 7,000 linear metres of larch. Board widths: 90 mm / 160 mm and 110 mm Min: thickness 17 mm, width 70 mm Max: thickness 90 mm, width 270 mm

Condition: used, mileage: 2,80,433 km, power: 130 kW (176.75 HP), first registration: 12/2008, fuel type: diesel, empty load weight: 6,390 kg, maximum load weight: 6,110 kg, overall weight: 12,500 kg, axle configuration: 2 axles, wheelbase: 3,050 mm, brakes: engine braking, color: orange, gearing type: mechanical, emission class: euro4, suspension: other, number of seats: 2, total length: 5,100 mm, Equipment: ABS, air conditioning, all wheel drive, differential lock, low noise, trailer coupling, Mulag mower type RMK-1200, Gmeiner Yeti 2500W spreader, year 2012, delineator post washing device, heated windscreen, hydraulic connections front and rear, front PTO. Non-binding offer – subject to change and prior sale – sold without any warranty – all information provided without guarantee! Dusdpfjylvtpex Aa Not

Condition: new, Year of construction: 2022, 28.55 rm. Wide span shelving 80 cm deep , Workshop shelving , Storage shelving , Large shelving , Manual storage , Shelving , Small parts storage Data : - Height : approx. 200 cm - Depth : approx. 80 cm - Length : approx. 28.55 running meters Shelf offer consisting of: - 16 x frame approx. 200 x 80 cm, disassembled. Duodpfoy N Twbjx Aa Njt - 90 x crossbar approx. 185 cm. - 45 x support shelf approx. 184.5 x 79.5 cm. - 90 x beam / load distributor. - Incl. safety pins - Model : BLT , Type WR20/80 - Load: 400 kg shelf load, with evenly distributed load. - Levels: 3 x storage levels. - Chipboard, natural. - Uprights blue. - Galvanized beam - New from stock. - other quantities available! We can pre-assemble the frames for a small surcharge of 6€/net per piece. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 2887,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2022, 57 rm. Wide span shelving 60 cm deep , Workshop shelving , Storage shelving , Large shelving , Manual storage , Shelving , Small parts storage , Data : - Height : approx. 200 cm - Depth : approx. 60 cm - Length : approx. 57 running meters Shelf offer consisting of: - 031 x frame approx. 200 x 60 cm, disassembled. - 240 x traverse approx. 185 cm. - 120 x support shelf approx. 184.5 x 59.5 cm. - Incl. safety pins - Model : BLT , Type WR20/60 - Load: 400 kg shelf load, with evenly distributed load. - Levels: 4 x storage levels. - Chipboard, natural. - Stand blue. - New from stock. - Other quantities available! We can pre-assemble the frames for a small surcharge of 6€/net per piece. Djdpfey N Tv Dex Aa Nsut -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 5885,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.