Used Gas - Automation Gmbh / Schunk Sar-1000-B-015 for sale (97,834)

Condition: good (used), WSM Stationary Screw Unit, Assembly Station Assembly of components for car radios and navigation systems, as well as testing of these components. The assembly station is surrounded by a protective enclosure. The service doors are equipped with monitoring switches with interlocking (locking). The doors are locked in automatic mode and can only be opened when the automatic mode is stopped or in manual mode after pressing the "Doors" button on the control panel. The automatic mode cannot be started when a door is open. Functional Sequence The station is loaded with the pre-assembled unit via the conveyor belt. The following describes the work steps of the automatic station with a process flow for a WT (test object). In normal operation, all 3 stations work in parallel. - Positioning the WT with the pre-assembled unit in Station 2.1 - Lowering the carrier with the scanner and vision sensor - Scanning the 3 codes (front panel, front PCB, SD PCB), comparison with the database - Checking the correct locking of the FFC in the connector - Raising the carrier and lowering the WT onto the belt - Positioning the WT with the pre-assembled unit in Station 2.2 - Positioning the screwdriver and screwing in the front PCB - Lowering the WT onto the belt - Positioning the WT with the pre-assembled unit in Station 2.3 - Lowering the light shield and making contact, moving the carrier with the test sensors from below - Type-dependent testing of the lighting of the SD + CD slots and buttons - Functional test of the CD eject button - Lowering the WT onto the belt > continue If errors occur during the test, they are displayed on the display and can be corrected if possible. Fjdsibichjpfx Ap Djpn To do this, switch to manual mode and open the doors. After the repair and starting the automatic mode, the WT is tested again in the station. If no repair is possible (e.g., screwing error), the WT is marked as NIO (Not In Order) in the control system and is no longer processed. Manual NIO marking and removal are also possible. More new and used assembly stations - find them in our shop! International shipping costs on request!

Condition: new, Year of construction: 2025, operating hours: 30 h, Panel benders (also known as swing bending machines or folding machines for sheet metal) are used across various industries where precise, automated bending of sheet metal components is required. The main sectors include: 🏭 Metalworking & Sheet Metal Processing Contract manufacturers / Sheet metal processing companies Fpsdpfjyb Hu Nox Ap Dsn Series and single-part production Enclosures, housings, cassettes, boxes 🚗 Automotive Industry & Suppliers Structural and body components Brackets, covers, interior components Especially suited for mass production requiring consistent repeatability ⚡ Electrical Engineering & Electronics Switchgear and distributor manufacturing Enclosures for controls, servers, industrial electronics Very common use due to numerous 90° bends and complex contours ❄️ Household Appliances & White Goods Washing machines, refrigerators, ovens Internal frames, covers, claddings 🏗️ Construction Industry & Architecture Facade elements Roof and wall claddings Metal panels, cassettes 🚆 Transport & Public Transit Rail vehicles, buses, commercial vehicles Interior claddings, technical housings 🛠️ Mechanical & Plant Engineering Machine frames Protective claddings Switchgear enclosures 🌬️ HVAC / Air Conditioning Technology Ventilation ducts HVAC unit enclosures Air distribution systems 🏥 Medical Technology Equipment enclosures Stainless steel claddings High requirements for precision & surface finish Why Panel Benders in these sectors? ✔ High degree of automation ✔ Excellent repeat accuracy ✔ Ideal for complex bent parts ✔ Gentle processing of painted or coated sheets ✔ Fast processing for small to medium batch sizes

Condition: good (used), Year of construction: 2013, operating hours: 300 h, functionality: fully functional, machine/vehicle number: H50KS, tractive force with load: 50,000 N, Universal testing machine, type H50kS up to 50KN for tension and compression Load cell 50KN 10KN 1KN and Windows software 8-9-10-or 11 for tension, compression, bending, shear etc., according to EN ISO 7500-1, ASTM E4 The H50kS is a universal testing machine developed according to the latest standards. The machine operates in accordance with the relevant radiation protection and safety directives in the EC. (EN 50081-1, 72/23/EEC, EN 61010-1) The maximum voltage within the machine is 48 volts. Special features - large, easy-to-read liquid crystal display with backlighting - Graphical or numerical display mode - alpha-numeric file input - speed range 0.001 to 500 mm/min. - high return speed 0.001 to 500 mm/min. - exact crosshead positioning - Robust load frame - Output report of results with mean value and standard deviation via printer - Large selection of test software under Windows for various standards - RS232 interface mode for use with computer system - Accuracy of load cell force display 0.5 % over the entire range - Displacement display accuracy 0.001 mm Fpedpjq Ruw Nefx Ap Den - Equipped with a force and displacement alarm system - 32bit motor controller - 20% digital weight blanking during load cell capacity check - Automatic motor alarm in case of over or under voltage and overheating Specifications: - Force measurement accuracy +/- 0.5 % of the displayed force in the range 2% to 100% - Accuracy of position measurement +/- 0.01 % or 0.001 mm - Speed accuracy +/- 0.005 % of the selected speed - Operating temperature 0 to 38°C - Humidity range 10% to 90% Technical data: - Two-spindle table model - maximum load 50kN in tension and compression - maximum stroke 1100 mm without clamping fixtures - for further details please refer to the brochure Dimensions: Height: 1613 mm width: 720 mm Depth: 500 mm Weight: 140 kg Connection: Machine: 50-60 Hz - 2000 W Power supply: 220/240VAC

Condition: good (used), Year of construction: 2010, 4 jaw air chuck SCHUNK Type: ROTA TB 850-270 LH/4 Year 2010 with control unit . Chuck diameter 850 mm Bore 270 mm Fpsdsubbx Hepfx Ap Don Jaws are individually adjustable with many soft jaws in good condition.

Condition: like new (used), functionality: fully functional, For sale is 1x Kistler maXYmos BL evaluation unit with the article number 5867B1011. XY monitor for good/bad assessment of curve profiles Table/wall mounting Sensor channel Y: for strain gauge sensors, +/-10V Fedpjzxz Epsfx Ap Dspn Sensor channel X: for potentiometers, +/-10V Fieldbus: Selectable - Ethernet/IP, EtherCat, or PROFINET for process values and control Digital I/O (24V) for control and results Measurement functions: Box, Line, Envelope Evaluation elements: Box, Line, Envelope 4 evaluation elements per curve 16 measurement programs for 16 different parts Up to 8,000 XY value pairs per curve Short evaluation time, up to 10 parts/second 2 switching signals in real-time for X and Y thresholds USB for notebook (PC program maXYmos PC) Info pages for NIO cause diagnosis Internal serial number generator with selectable format Warning and alarm messages can be freely assigned Access protection for different user groups 3.5" color touchscreen Power supply 24 VDC The item comes from stock/spare parts inventory. The optical condition can be seen in the attached pictures. We will gladly provide further technical documents or detailed pictures upon request. Inspection and collection are possible by arrangement. Shipping is possible for an additional charge. Subject to prior sale, errors and changes.

Condition: good (used), Year of construction: 2004, functionality: fully functional, total length: 880 mm, total width: 700 mm, Equipment: type plate available, Belt Conveyor/Conveyor Belt Manufacturer: Transtechnik GmbH Year of manufacture: 04/2004 Condition: Used Model type: 80/600 Total length: 880 mm Total width including motor: 700 mm Total width without motor: 650 mm Belt width: 595 mm Belt type: smooth Color: Stainless steel/black Material: Stainless steel/aluminum Frame height: 100 mm Drive type: drum motor Internal item number: 2026013003 Thanks to the excellent workmanship of the conveyor technology, your materials glide smoothly to their destination even under heavy load. Tailor-made solutions for your intralogistics Whether roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods – we are your experienced partner! We are happy to provide you with a customized offer or advise you on design and installation matters. Simply inform us of your requirements and local conditions. Benefit from our many years of experience and our outstanding network of experts. We have already successfully implemented projects for companies in various industries, such as logistics, pharmaceutical, crafts, and electronics sectors. Fpsdpfx Apeyg Nqqs Dsn Together, we will develop solutions to optimize your processes and material flow efficiently and sustainably. We can also offer fully automated sorting technology or additional components such as order picking racks or containers.

Condition: like new (used), Year of construction: 2018, operating hours: 100 h, functionality: fully functional, Equipment: documentation/manual, The conveyor belt from Kraus GmbH is for sale. It was previously displayed at a trade show and has the following technical specifications: New price of the belt: €7,000 Belt length: 2600 mm Belt width: 1200 mm (usable width) Overall width: 1300 mm Height: 800 mm - 950 mm Mobile Fpodpoziuqgofx Ap Djn Load capacity: 100 kg Belt speed (constant): 2 m/min Conveyor surface: Modular belt, PP/gray, with FDA approval (suitable for medical/food applications) Gear motor: SEW 230/400V Frame made of galvanized profiles with bolted connections.

Condition: used, Year of construction: 2004, Overview The Solo Screw Capper was manufactured in 2004 by the German engineering company Dr. Datz. The machine can process aluminum screw caps. It was used in a bottling line of a mineral water company. The line mainly used for contract bottling and was now stopped, to be sold in parts. Fsdpsxrfzhsfx Ap Dopn Technical Specifications: - Number of closing elements: 8 - Capacity: up to 20.000 bph - Cap type: 28mm aluminum screw cap - Working direction from left to right - Format: 0,7l GDB bottle

Year of construction: 2026, condition: new, functionality: fully functional, Selling a roll-off container, 4-20 cubic meters, without a lid. Product description: For sale is a 4-20 cubic meter roll-off container without a lid, manufactured according to DIN 30720-1, ideal for the transport and storage of waste, bulk materials, or industrial materials. The container is robust, safe, and ready for immediate use. Technical data: * Standard: Technical description 30720-1 * Bottom: 6 mm, steel S355 * Sides: 4 mm, steel S355 * All sheets and profiles welded * Corner reinforcements * Double-sided 3-point tilting bearing (pin Ø45) x 2 – simple and safe emptying * Stacking bar: 5 mm * Securing bar * Front profile: 120 x 60 x 4 mm * Frame edges: U 100 x 50 x 4 mm * Information and warning labels: white and red Fpjdpfxszmhdhs Ap Den * Color: entire RAL color range available * Coating: interior and exterior with zinc phosphate primer, exterior painted with synthetic resin paint (80–100 μ) * Certificate: CE * Warranty: 2 years Advantages: * Robust construction for heavy materials * Easy handling thanks to the lid and sturdy hinges * Stackable and transportable with tilting truck systems * Weather-resistant thanks to corrosion-resistant paint

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, total height: 1,240 mm, !Exhibition return cabinet! WKS003 Tool cabinet set for bending with five vertical pull-outs of 180mm each Dimensions: W=1040mm, D=1300mm, H=1240mm Two-colour powder-coated (Trumpf) Housing: gentian blue structure (RAL5010) Pull-outs: white structure (RAL9002) Payload of 900 kg per pull-out Fodeuucmgopfx Ap Depn Product code: 94032080 manufactured: DE/08 Weight: 445 kg net (475 kg gross) Pre-assembled as a set for approx. 33 running metres of press brake tools. Max payload 900 Kg for each drawer

Condition: ready for operation (used), B&R 5AP820.1505-00 Automation Panel 800 with 5AC800.EXT1-00 keyboard + 5AC800.EXT3-03 keyboard extension, used, in good condition, 100% functional, scope of delivery as shown in the photos. Fsdpfjx Equ Nox Ap Dspn

Condition: ready for operation (used), Year of construction: 2001, operating hours: 56,927 h, functionality: fully functional, Manufacturer: ATM Recyclingsystems GmbH Model: ArnoBrik 15 Year of manufacture: 2001 Briquette diameter: 150 mm Technical Data Briquette diameter: 140 or 150 mm Capacity: - Cast iron chips: 4.8 – 5.3 t/h - Steel chips: 4 – 5 t/h - Mixed briquetting: 4 – 5 t/h - Aluminium chips: 1.6 – 1.8 t/h Mixed briquetting: 4 – 4.5 t/h Tyre wire: 2.5 – 3 t/h Hourly throughput depending on material Briquette density for steel and cast iron: 5.5 kg/dm³ Operating pressure: 300 bar Required space (L x W x H): 13,500 x 6,500 x 2,000 mm Machine weight: 30 t Main cylinder force: 5,300 kN Fpedpfxsxy E H Ho Ap Den Oil requirement: 2,800 litres Main drive: 4 x 30 kW Connected load including ancillary equipment: approx. 150 kW Briquette height: 110 - 140 mm Briquette weight – depending on material: approx. 10 - 16 kg Cycle time: approx. 10 sec

Condition: like new (used), Equipment: type plate available, Used stainless steel transport container Prepared for agitator Type: SBPA150 Item number: 10796 Volume: 173 liters Type: Upright design on pallet Design: Single-walled, 1.5mm wall thickness Fodpor A Engefx Ap Depn Material (wetted parts): 1.4301 stainless steel Surface: Satin-finished outside, IIId inside Internal weld seams: Pickled, passivated and brushed Operating pressure: Atmospheric Top: 1/2 hinged lid Underbody: dished bottom with outlet bead Tank dimensions: Tank diameter: 650mm Total height: 815mm Pallet: 675 x 719mm Equipment: 1x 1/2 hinged lid on the top, latching function (lid can be latched in open 90° position) Stainless steel sheet metal grates underneath the hinged lid, screwed, removable DN50 ball valve outlet fitting DIN11851 Galvanized transport pallet Type plate

Condition: ready for operation (used), A Maka 5-axis CNC machining center for aluminum, plastic, or wood in need of repair is offered. Travel path X/Y/Z: 2500mm/1500mm/650mm, max. fixture height: 180mm, rapid traverse X/Y/Z: 60m/min, C-axis rotation: 540°, A-axis swivel: +/-98° (196° total range), number of work tables: 2, table size per table: 2500mm x 1500mm, magazine capacity: 20 tools per magazine, total tool positions: 2x20. The drive motor of the Z-axis is defective. Inspection possible by appointment. Fjdpfx Apezcyq Ho Depn

Year of construction: 2026, condition: new, functionality: fully functional, For sale: skip loader container, 5.5 - 12 cbm, with steel lid. Product description: For sale is a 10 cbm skip loader container with a steel lid, manufactured according to DIN 30720‑1, ideal for the transport and storage of waste, bulk materials or industrial materials. The container is robust, safe and ready for immediate use. Technical data: Standard: Technical description 30720‑1 • Bottom: 6 mm S 355 • Sides: 4 mm S 355 • All sheets and profiles are welded • Corner reinforcements • Double-sided 3-point tilting bearing (pin Ø45) x 2 • Stacking bar: 5 mm • Securing bar • Front profile: 120 x 60 x 4 mm x 2 • Frame edges: U 100 x 50 x 4 mm • With steel lid - 1.2 mm • Information and warning stickers, white and red • The entire range of RAL colors is available • Zinc phosphate primer inside and outside, painted with synthetic resin paint (80-100 μ) outside Certificate: CE Fjdpszmh R Iefx Ap Dspn Warranty: 2 years Advantages: Robust construction for heavy materials Easy handling thanks to flap and sturdy hinges Stackable and transportable with tilting truck systems Weather-resistant due to corrosion-resistant coating

Condition: good (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: K974.016, Plasma spraying system - Comfort control panel - Gas regulation cabinet for plasma - Power source PPC 2002 NG Fpedpfx Apsym Ay Ee Dsn - JamBox - Powder feeder PF 2/2 - Plasma torch - Plasma hose and cable set for 9MB - Sigma 67-2K water recooler with 2 cooling circuits for separate use of a 9MB and TopGun torch - Control cabinet - TS modem adapter

Condition: new, Year of construction: 2021, Mobile Banding Machine – Flexible, Compact, and Ready to Use Looking for a simple and efficient solution for bundling and labeling your products? Our mobile, manually operated banding machine offers maximum flexibility for a wide range of applications in production, shipping, and logistics. Thanks to its compact design, the machine can be easily moved and used at different workstations. Its user-friendly operation enables fast and reliable banding of products, cartons, printed materials, and bundled goods without the need for complex installation. Using paper or plastic bands, products can be neatly bundled, identified, and secured for transport. Key Benefits: Mobile design for flexible use Manual operation – simple and intuitive Fast bundling and labeling of products Suitable for paper and plastic banding materials Compact, space-saving construction Sustainable packaging solution with reduced material consumption Ideal for small to medium production volumes and seasonal applications Applications: Fpjdpfx Apszd Apgo Don Shipping and logistics Food and consumer goods industries Printing and publishing companies Warehousing and order fulfillment Retail and manufacturing operations Bundle efficiently, package sustainably, and work flexibly with a mobile banding machine designed for modern business needs. Suggested Advertisement Headline: Mobile Banding Machine – Flexible Bundling, Easy Operation, Sustainable Packaging

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, total length: 1,050 mm, total width: 1,040 mm, total height: 1,240 mm, overall weight: 410 kg, number of drawers: 5, !RETURNED KNIVES! Directly from the manufacturer, the original from the patent holder Apfel GmbH. Dimensions: W=1040 mm, D=1050 mm, H=1240 mm two-tone powder-coated Housing: gentian blue structure (RAL 5010) Pull-outs : gray-white structure (RAL 9002) Payload per pull-out 900 kg Product code: 94032080 Swiss commodity code: 9403.2010 Origin: DE/08 Weight: approx. 410 kg As a set approx. 26 running meters of press brake tools completely assembled. Available in various sizes and with many accessories! Fpedpfx Apouua Uze Den

Condition: excellent (used), Year of construction: 1986, Cryolor gas tank semi trailer for oxygen, nitrogen, argon cryogenic, carbon dioxide, LIN, LOX, LAR,CO2 Manufacturer: Cryolor, France Year of Manufacture: 1986 Type: EFM 17000 Total Capacity: 17,410 liters Fedpfx Aowmmaksp Depn Tare Weight: 10,050 kg Gross Weight: 22,000 kg Working Pressure: 20 bar Test Pressure: 27.32 bar Tank Code: R 27.3BN Insulation: Vacuum insulated The tank is for the transport and storage of deep-cooled liquid gases such as nitrogen, oxygen, argon, or CO₂. Contact us for more information or to arrange a viewing.

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: MIKA Seilzüge, 1x Demag DR wire rope hoist crane Due to numerous inquiries - Price is per unit! 5 units available, see listing below: 1x Demag wire rope hoist EKDR-Pro3 NL1600Kg/1.6t, serial number 96656002, 4M, hook path/lift 12m! – double reeved, year 2015 1x Demag wire rope hoist EKDR-3 NL1600Kg/1.6t, serial number 96656701, 2M, hook path/lift 12m! – double reeved, year 2015 1x Demag wire rope hoist EKDR-3 NL1000Kg/1.0t, serial number 96305549, 4M, hook path/lift 12m! – double reeved, year 2012 1x Demag wire rope hoist EKDR-3 NL1000Kg/1.0t, serial number 96305548, 4M, hook path/lift 12m! – double reeved, year 2012 Fedpfx Apoy D D S So Dopn 1x Demag wire rope hoist EKDR-3 NL1600Kg/1.6t, serial number 96305550, 4M, hook path/lift 12m! – double reeved, year 2012 Each with 2 lifting speeds, lifting height 12m, trolley gauge adjustable Each hoist supplied with pendant control and power supply plug Total weight approx. 300 kg, connection to 400V 50Hz Very good condition, see photos Item location: 75053 Gondelsheim Shipping available, please inquire with your postal code

Year of construction: 2026, condition: new, functionality: fully functional, For sale: 4-10 cubic meter skip loader with a flap Fpjdpfx Apszmhuye Den Product description: For sale is a 4-10 cubic meter skip loader with a flap, manufactured according to DIN 30720-1, ideal for the transport and storage of waste, bulk materials, or industrial materials. The container is robust, safe, and ready for immediate use. Technical specifications: * Standard: Technical description 30720-1 * Base: 6 mm, steel S355 * Sides: 4 mm, steel S355 * All sheets and profiles are welded * Corner reinforcements * Double-sided 3-point tilting bearing (pin Ø45) x 2 – simple and safe emptying * Stacking rail: 5 mm * Securing rail * Frame edges: U 100 x 50 x 4 mm * Frame edges flap: U 100 x 50 x 4 / 100 x 50 x 6 mm * Information and warning stickers: white and red * Color: entire RAL color palette available * Coating: zinc phosphate primer inside and outside, painted with synthetic resin paint outside (80–100 μ) * Certificate: CE * Warranty: 2 years Advantages: * Robust construction for heavy materials * Easy handling thanks to the flap and sturdy hinges * Stackable and transportable with tipping truck systems * Weatherproof due to corrosion-resistant coating

Condition: used, Second-hand machine Features and technical specifications: - Universal dowel drilling machine for horizontal and vertical drilling - Working width 720 mm - with drilling beam, drive motor 3 PS, 2800 rpm - 23 drilling spindles, drilling pitch 32 mm - Pneumatic workpiece clamping via foot valve - 2 stop rails, 1000 mm - with chassis Availability: at short notice Storage location: 63934 Röllbach Fsdpfxjzk N Ats Ap Djpn

Condition: as good as new (ex-display), Year of construction: 2025, Briquette Diameter: 40 mm Power: 4 kW Press Output per hour: depended on material Hopper opening: 1.044 x 1.044mm Controlled by PLC Hydraulic tank: 100l New exhibition machine with 5 operating hours Fpodjvptrtepfx Ap Dsn

Condition: new, Year of construction: 2026, operating hours: 10 h, functionality: fully functional, machine/vehicle number: Parmel_042026PA, type of input current: three-phase, total width: 2,504 mm, total length: 5,768 mm, input voltage: 400 V, feed length Y-axis: 2,500 mm, working width: 1,800 mm, total height: 1,330 mm, repeat accuracy: 0.01 mm, cutting width (max.): 1,600 mm, cutting height (max.): 50 mm, compressed air connection: 4 bar, BUFFALO Cutter – Fabric & Textile Cutting Machine Our BUFFALO Cutters are the ideal solution for the precise cutting of textiles, leather, technical fabrics, and composite materials. With state-of-the-art CNC technology, they guarantee: • Highest cutting precision for patterns, prototypes, and series production • Flexibility for different materials and formats • Efficiency through short setup times and automated processes Whether in the fashion, furniture, or automotive industry – our fabric & textile cutting machines deliver perfect results with maximum productivity. Fpjdpfx Aezf Ifvsp Dsn Model PC W16L25 • Single-layer cutting up to 50 mm height • Working area (W × L): 1600 mm × 2500 mm • 2 cutting heads, double cutting head, needle punch, and plotter pen holder • Tool kit: ERT, EOT, VPT (electric rotary knife, oscillating knife, punching module) • KIS (Knife Initialization System) • Vacuum pump • Air compressor • Passive roller feeder for non-elastic fabrics • Parmel Cutting Software • 12 months warranty We offer installation, training, spare parts, consumables, and guarantee smooth operation both during and after the warranty period.

Condition: like new (used), functionality: fully functional, Year of construction: 2019, load capacity: 500 kg, The equipment is like new and has barely been used. Hydrobull mobile crane with counterweight, 500 kg load capacity, pre-filled, model ITI 500 N. Fpedpfoy El E Nsx Ap Dsn The original Hydrobull crane with counterweight features a chassis shifted to the rear, and its uniquely curved design conceals the counterweight, which is added on-site. Thanks to the counterweight, the compact crane is flexible and ready for immediate deployment. This highly affordable original Hydrobull crane is designed for occasional use. For more frequent operation, we recommend the Elektrobull or industrial models. The compact hydraulic unit is rated for approximately 500 lifting cycles.