Used Guard Rail Roll Forming Line for sale (31,387)

Condition: new, maximum load weight: 52,810 kg, overall weight: 63,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of immediately and soon available vehicles on our website. Excerpt from the equipment list. Full specifications available on request. Cargo area: * Cargo area with approx. 30 mm thick hardwood floor * 10 pairs of folding external lashing rings (LC 10,000 daN) Landing legs: * Hydraulic landing legs TPMS: * TPMS tire pressure monitoring system compliant with ECE R 141. Data transmission to the tractor unit is via the standardized EBS interface according to ISO 11992. For correct display, the tractor must be capable of transmitting and displaying these data. Axles and suspension: * BPW axles, technical capacity 12,000 kg each, first axle fixed, all others hydro-mechanically forced-steered, mounted on turntables * Air-suspended with lift and lower valve * Axle toolkit Tires: * Tires 445/65 R 22.5 169 K Electrical system: * Electrical system in accordance with EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets * Connections according to standards. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Brake system: * Wabco brake system compliant with EU regulations, with EBS-E (4S3M), without connecting lines to the tractor unit Steel construction: * Steel construction made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield point 355MPa), S690QL/S700MC (yield point 690MPa) Painting: * Complete steel structure automatically shot-blasted after welding using a shot-blasting machine * Secondary blasting with corundum for optimal adhesion of the coating system * Final painting with 2 coats of 2K topcoat, single color in RAL 1007 Narcissus Yellow according to RAL system 841GL * Rear section metallized and painted in RAL 9010 Pure White * Wheels in Silver Grey Lsdpfx Aoxttc Aob Uort * Paint structure tested in salt spray test according to ISO 9227-NSS * Cavity sealing with special wax Including accessories: * Cargo area with approx. 30 mm thick hardwood floor * 2-inch king pin * One galvanized steel front wall (EN12642-XL), approx. 1,200 mm high * Yellow-red air couplings on the galvanized front connection strip * On the gooseneck and rear panel left and right, each with a bracket for warning signs including socket * Rear steering from the front and rear by cable remote control via push buttons, with single-track control of the axles (without installation in the tractor unit) * Electro-hydraulic unit * 12 pairs of stake pockets for approx. 100 x 50 mm stakes in the outer frame of the cargo area * Load manometer for determining axle loads including load diagram * Lift axle on the front axle, controlled by TEBS E * 5 pairs of crosswise stake pocket rails on the cargo area, for approx. 100 x 50 mm stakes * One INOX toolbox 1,200 x 460 x 550 mm mounted at the front left under the cargo area (in direction of travel) * 1 shunting coupling with reinforcement bolted to the rear cross member * BEKAMAX (Pico) automatic central lubrication system with standard grease NLGI-2 and removable pump guard * 2 LED reversing lights mounted on the rear panel * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum)

Condition: good (used), Year of construction: 1975, 13 stations shaft Ø: 50,4 mm strip width: 500 mm Lrjdpfxsbif E Eo Ab Uot strip thickness: 1,5 mm

Condition: new, Year of construction: 2025, Standing seam roof panel machine F3-39 (1.5 inches) Standing seam roof panel machine F3-39 logically complements the line of machines for double standing seam roof panels production we make. In Europe, the most common is 25 or 27mm lock high, but outside of Europe, in some parts of America and Canada regions seam metal roofing with 39mm lock high is also popular. That is why our company decided to start production equipment for such task, to expand sales geography, and to bring our products to more and more customers who may need it. Metal roof machine F3-39 has additional rolls for clip-relief rolling, which come as standard set of machine supply. Clip-relief is a small bend locating closer to the locks of panel and which make possible to hide fixation clips under the panel. Standing seam machine F3-39 has 8 pairs of main rolls to make the main part of the lock and a ninth stand to make clip-relief part. The rollers and base of machine are stronger comparing to standard version of equipment – roof panel roll forming machine F3. It has also rolls of bigger diameter to make 39mm (1.5 inches) lock. Despite all these increases, standing seam roof panel machine F3-39 is portable one, our customers can directly take it to construction place, and you can use it at the roof installation site as well. Thus giving the customer opportunity to reduce number of panel’s damages and the transportation cost. There is drawing of panel you can get with our F3-39 machine Roof panel roll forming machine F3-39 can make panels with clip relief or without it, depends on customer preferences. Machine can work with coated materials or without coating as well. Suitable for steel coils, copper aluminum, zinc etc. It’s possible to adjust gaps between rollers depends on material thickness customer use for forming. Standing seam metal roof machine has easy adjustable system to change the width of the panels. The machine operator just need to rotate adjusting wheel to make it happens As additional options you can get Length measuring device to set up number and lengths of panels; Cross cutting knife for metal cutting; Rolls for ribbed panels production; Floor decoiler; Hand seamers for lock closing; Sliding clip formers; Fixed clip former. Our company can produce other machines for metal roofing production: Lsdpfx Asq U N T Rjb Ujrt Standing seam metal roof machine F3 for 25mm lock high; Standing seam machine F3-27 for 27mm lock high; Snap lock roof panel machine SL-1; Automatic snap lock metal roofing panel machine SL-1 auto;

Condition: excellent (used), Year of construction: 2022, operating hours: 800 h, Equipment: documentation/manual, Top specification forming coating and frying line. B ought new in 2022 and only used for a few months. Fryer 6m x 650mm has 800 running hours. Lodpfxjzii N De Ab Uort

Condition: good (used), Year of construction: 2010, Koenig G 2000 Roll Line Lsdpfxoyu Rt Aj Ab Ujrt - used - year of manufacture: 2010 - Mini REx Futura divider - 2-row - weight range: 20–135 g - machine from production - checked and cleaned - collection from warehouse/shipping option available - price on request

Year of construction: 1992, condition: excellent (used), Roll forming machine Manufacturer: Abele & Höltich Type: BB 20 Year of manufacture: 1992 Roller diameter: 180 mm Power: 5.5 kW Voltage: 400 volts Space requirement: Lredpfx Absg Tcn Is Uet Width: 2400 mm Depth: 2100 mm Height: 1800 mm Documentation available.

Condition: good (used), Year of construction: 2011, Automatic unloading line for box pallets. The line is manufactured by MEGA and consists of roller conveyors, a turntable, and a tipper. Suitable for all types of vegetable unloading from box pallets / bins. Lrodpfx Abowylikj Ust

Condition: excellent (used), SINGLE-SIDE Sizing-Milling & Edge Banding Line PRE-FORMING (DIRECT POSTFORMING), composed of the following machines: A) Double station bridge loader "TREVISAN", with motorised roller conveyor B) Single-side Sizing & Edge Banding "HOMAG" Mod. Profi VFL79/3/P/A Preforming Edges (tape) thickness in rolls (min/max) max mm 0.35 (for U and L profiles) Panel thickness (min/max) mm 16 / 30 (optional mm 50) Working width (min/max) min mm 150 - Variable feeding speed (m/min) 10 - 32 Numerical control / PC 22 software / WoodCommander 01°) Horizontal milling unit (for top incision) Kw 2,2 02°) Hogging Unit (Kw 15) 0°-15° (for pre-hogging from above) 03°) Milling Shaping Unit Kw 6,6 (top rebate milling) with Hydro-clamp 04°) Milling Shaping Unit Kw 6,6 (bottom rebate milling) 0°-120° (with Hydro-clamp) 05°) Milling Shaping Unit Kw 0.7 (radius milling for profile finishing) 06°) Milling Shaping Unit Kw 1.85 (U profile milling) HSK25 07°) Milling Grooving unit UF 11 (Kw 4) for grooving or rebate milling 08°) Milling Shaping Unit Kw 2,2 (milling for chamfering and laminate overhang at top) 09°) Milling Shaping Unit Kw 2,2 (milling for the bottom bend groove) 10°) RIGHT SIDE: Milling Shaping Unit Kw 6,6 (grooving & rebate milling) panel width mm 160 - 1050 11°) RIGHT SIDE: Fine trimming unit (2 x Kw 1) for top and bottom edging and finishing (0°-25°) 12°) Cleaner / Blower (Kw 0,55) of postformed piece 13°) Laminate overhang control (to detect laminate breakages) Ledpfjnzhxqox Ab Usrt 14°) Glueing Unit (P.U.R) Glue (PU34+QA34) spray glue application (with nozzles) 15°) Pressure zone for "L" profile (VF Direct) for panels up to max. thickness 50 mm 16°) Pressure zone for "U" profile (for spacer profile R = 2.5 mm) 17°) Upper Circular Knife 18°) Fine Trimming Unit / Finishing Unit (2 x Kw 0.55) HSK25 (0°-30°) 19°) Oscillating upper cleaner (1 x Kw 0.25) C) Double station bridge unloader "TREVISAN", with motorised roller conveyor

Condition: used, Year of construction: 2017, machine/vehicle number: LC623, Used Thermoforming Packing water cup line - 11500 BPHTechnical Specifications & Performance DataThis used bottling line is a complete cup filling and packaging solution engineered for beverage production in water applications. The centerpiece is the TR-ALP 10 cup form-fill-seal machine, designed to thermoform, fill, seal, and cut PET cups with high efficiency. With a 5x2 format (10 cavities per cycle) and a working capacity of 17–20 cycles/min, the system achieves up to 12,000 cups/hour, ideal for second hand industrial packaging lines seeking reliable output. The integrated end-of-line equipment includes a robot cartoner, a case erector, a case sealer, and conveyors for smooth downstream handling.Production speed: up to 12,000 cups/hour (10,200–12,000 cups/hour typical)Cycle rate: 17–20 cycles/minCavity configuration: 5x2 (10 cavities per cycle)Punch size: 71 x 71 mmSupported cup formats: 100 ml and 200 mlBase material: PET film, 500–700 micronLid materials: Aluminum 40 µm or 12 µm / APET + 12 µm / HSL heat-sealable, peelableProduct contact parts: Stainless steel AISI 316Maximum film width: 390 mm (base), 375 mm (upper)Reel diameters: lower 800 mm, upper 300 mmMain machine weight: approx. 2,500 kgCase sealer model: GEM F470Case erector model: F2000Advanced Automation & Control SystemsThe line features robust automation for consistent cup forming, accurate dosing, and reliable sealing. The TR-ALP 10 employs a time-controlled gravimetric dosing system with 10 control valves for uniform fill volumes. Electrical architecture is industrial-grade with clear protection ratings and safety circuitry.Power supply: 3 x 380 V ACInstalled power: 25 kWCurrent: 40 AFrequency: 50 HzControl voltage: 24 V DCDosing system: time-controlled gravimetric, 10 valvesFilling temperature: 15–25 °CSafety hardware: integrated emergency and safety switching (industrial components)Production Line Integration CapabilitiesEngineered for seamless industrial packaging, the line integrates cup production with end-of-line case handling. A vacuum pick-and-place robot cartoner manages multiple cup sizes, with packing recipes for both 100 ml and 200 ml formats. Automatic case erecting, sealing, and three conveyors enable inline or modular operation in diverse layouts.End-of-line: robot cartoner, case erector F2000, case sealer GEM F470, conveyorsPacking configuration: 30 cups/carton (200 ml: 2 layers 15x2; 100 ml: 3 layers)Format flexibility: 100 ml and 200 ml tooling setsContainers: PET cups; secondary packaging in cartonsMachine Condition & Maint... Ledpey Icp Dofx Ab Ujrt

Condition: not inspected (used), Konig eco twin 800 with rex classic ll head macine Ex bakery condition as is Lrodpfoxy Svbjx Ab Ust

Condition: excellent (used), The minimum order quantity is 8 stations, with the price per station being €4,000. The stations are new. The line consists of stations for profiling shafts with a diameter of 50 mm and an 8 mm keyway. Material feed thickness ranges from 0.4–2.5 mm, with a strip width of 320 mm. There are 8 stations per table, driven by a 15 kW motor with a reduction gearbox. Four sets of stations are mounted on robust steel beams measuring 45 x 700 x 1,500 mm. This allows for quick changing of rollers fitted with various spare modules for finished profiling station segments. Ljdpfx Abjwxv Nls Uert This configuration includes two table segments with 8 stations each, providing a total of 16 profiling stations. The specified price applies per set of stations on a given table. These tables can be configured and assembled according to the required profile—e.g., with 8, 16, 24, or 32 stations. The table features a strip guide and a turk's head, a straightening head, and a profile output device before the guillotine shear, a flying saw, or a fixed take-off table. We offer various configurations of such solutions for these tables. By exchanging the shafts, we can achieve a maximum input width of 550 mm.

Condition: new, maximum load weight: 14,140 kg, overall weight: 18,000 kg, axle configuration: 2 axles, Equipment: ABS, Dimensions and Weights External length approx. 6,896 mm Overall width approx. 2,500 mm Loaded ride height approx. 1,310 mm Rollway length approx. 6,880 mm Wheelbase 5,100 mm Complete empty weight 3,860 kg Lsdjvynagepfx Ab Uort Gross weight approx. 18,000 kg Payload 14,140 kg For containers with a length of 5,000 to 7,000 mm according to DIN 30722. Chassis Chassis with cross members, welded box-type idler beams made of QSTE steel 4 pneumatically operated container locks Side guards closed according to Directive 89/297/EEC. Spare wheel holder in basket design for 2 spare wheels including mounting kit for 1. Bogie Bogie 1300 FM including ball-bearing turntable 90/1300/22 (low-maintenance). Drawbar Drawbar 2600/1300/100/30 with height adjustment (tension spring with turnbuckle) Drawbar with DIN drawbar eye, inner diameter 40mm, outer diameter 110mm, thickness 30mm Axles 2 x 9 t axles for 22.5 disc brakes, manufacturer's choice. Brake disc diameter approx. 4300 mm, wheel mounting by centering according to DIN 74 361 Part 3. Braking system Compressed air brake system according to EU directive with Duomatik coupling head Conventional air suspension system, EBS type 4S/3M, electronic braking system with ROLL Stability, double-diaphragm spring-loaded cylinder on the rear axle, release valve for separate release of the spring-loaded brake. Lighting system 24-volt full LED lighting system in accordance with Directive 76/756/EEC with multi-chamber light and license plate light integrated into the light panel, manufacturer's choice 1 x 15-pin connector 6 LED side marker reflectors with flashing lights 2 white LED front marker lights 2 LED rear lane departure lights, separately mounted 1 LED reversing light Wheels/Tires Regional transport tires: 4 tires 385/55R22.5 (11.75x22.5) Steel wheels, offset 120, unpainted wheel nuts. Including tire pressure monitoring Underrun protection Aluminum underrun protection. Two vertical delta bumper profiles serve to protect the rear during loading and unloading. Accessories 4 plastic half-shell fenders, front and rear, single-wheel fenders 4 anti-spray mud flaps, neutral 1 lockable plastic toolbox 1 wheel chock with bracket 1 license plate holder 1 A-plate for transporting waste materials 1 hanging net box Paintwork Chassis color: MB 7350 Nova Gray Wheel hub color: black cathodic dip-coat Wheel rim color: RAL 9006 Silver Rear contour markings: red Side contour markings: white Closed SSE: RAL 7001 Silver Gray Rear end/light panels: RAL 7001 Silver Gray Underrun protection: anodized aluminum (silver) Locking hook: yellow Documentation Commissioning and braking report Operating instructions Axle manufacturer's maintenance instructions Side protection device, closed Hanging net box, galvanized EBB sticker DEKRA certificate All information No guarantee. Errors excepted. Prior sale possible.

Condition: new, maximum load weight: 45,115 kg, overall weight: 53,000 kg, axle configuration: 3 axles, Equipment: ABS, More vehicles can be found at [website address]. Excerpt from the equipment list. Complete equipment list available upon request. Loading area: Loading area with approximately 30 mm thick hardwood flooring. 8 pairs of lashing rings that can be folded outwards (LC 10,000 daN). Kingpin: JOST kingpins (mechanical) with a 2-speed gearbox for an approximate lifting capacity of 24 tons (approx. 50 tons test load). Tires: 385/65 R 22.5. TPMS tire pressure monitoring system according to ECE R 141. Data transmission to the tractor unit is via the standardized EBS interface according to ISO 11992. For correct display, the tractor unit must be able to transmit and display this data. Axles and suspension: BPW axles, technically rated at 10,000 kg each. 1st and 3rd axles are hydro-mechanically forced-steered and mounted on a turntable. 2nd axle is fixed. Air-suspended with lifting and lowering valve. Axle spanner. Braking system: Wabco braking system in accordance with EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit. Electrical system: Electrical system in accordance with EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098. Lsdpfxjzhd Nis Ab Uert Steel structure: Steel structure made of high-strength fine-grain steels. Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa). Painting: Complete steel structure automatically blasted with a shot blasting system after welding. Second blasting with corundum for optimal adhesion of the coating system. Final coating with 2 layers of 2K topcoat, solid color in RAL 3002 Carmine Red according to the RAL 841GL system. Rear part is metallic and painted in RAL 9010 (pure white). Rims in silver. Coating tested in a salt spray test according to ISO 9227-NSS. Sealing of cavities with special wax. Accessories: Loading area with approximately 30 mm thick hardwood flooring. 2-inch kingpin. One galvanized steel front panel (EN12642-XL), approximately 1,200 mm high. Yellow-red air couplings on the galvanized front connection bar. 4 pieces of wheel chocks with holders on the front panel. Storage for approximately 1,000 mm lashing bars in the rear central beam. On the gooseneck and rear panel, one holder each on the left and right sides for warning signs including a socket. Yellow reflector tape according to EU regulations on the side and rear of the trailer. 10 pairs of lashing bar pockets for lashing bars approximately 100 x 50 mm in the outer frame of the loading area. European reflector signs (red-yellow) on the rear of the trailer. One holder for a rotating beacon on the rear of the trailer. One mud flap on the rear of the trailer. Manual and description on a USB stick. Speed stickers 80 km/h on the rear and both sides. Electro-hydraulic unit. 1 maneuvering coupling with reinforcement bolted to the end cross member. Load manometer for determining the axle loads including a load diagram. Central lubrication system BEKAMAX (Pico) with standard grease NLGI-2 and a removable guard around the pump. Follow-up steering from the front and rear using a cable remote control via push buttons, with single-axle steering control (without installation in the tractor unit). 7 pairs of galvanized lashing bars approximately 100 x 50 mm, approximately 1,000 mm high. 4 pairs of lashing bar strip rails, mounted transversely in the loading area, for las

Year of construction: 1986, condition: good (used), Technical Details : Products - - Flats - 10x3 - 25x3 mm 10x4 - 25x4 mm 12x5 - 20x5 mm - Square - 6x6 - 12x12 mm - (T) Profile - 20x10x3 mm Lredpfx Aed H Ur Aob Uot - ( L) Profile - 15x15x3 - 18x18x3 mm Raw Material wire - 8,9,10,11,12,13,14,16 mm Transformer Power - 20 Kw Speed - 35m/min

Condition: used, first registration: 01/1991, color: grey-black, Year of construction: 1991, gearing type: other, LICENSE PLATE: PV014435 TITLE: VIBERTI HYDRAULIC TIPPING SEMI-TRAILER REF: 25R22 Ljdpextrbqsfx Ab Uert YEAR: 1991 AXLES: 2 WHEELBASE: 4900 MAXIMUM LENGTH: 8.985 m COUNTRY: Italy PAYLOAD: 17000 kg - SEMI-TRAILER: 20500 kg at full load TYPE OF EQUIPMENT: hydraulic tipping EQUIPMENT MODEL: MEC ADR: CARGO SPACE DIMENSIONS FROM: 5.00 m + 0.20 m TO: 6.60 m + 0.20 m SUSPENSION: pneumatic BRAKES: drum TIRES: 265/70 R19.5 ACCESSORIES - operation of the tipping mechanism with hydraulic lines from the tractor unit RECONDITIONED: no INSPECTION: 23/02/2024 TIRE CONDITION: 1st axle 70%, 2nd axle 40% PRICE: 3,500.00 € + VAT. Subject to errors and/or omissions. The prices shown do not include VAT. Please contact the sales representative for an updated comparison of prices and conditions. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile AURORA HYDRAULIC TIPPING SEMI-TRAILERS operates in the sector of sales and purchase of industrial and commercial vehicles, specializing mainly in the waste management sector. Specialized in trucks, trailers, and hydraulic tipping equipment. With a stock of over 50 trucks and over 150 tipping bodies, containers with and without cranes, available for immediate delivery. S.E.&O Given the number of listings and details provided, Aurora invites you to verify the accuracy of the data with the sales staff.

Year of construction: 2005, condition: excellent (used), 16 stations design: cassette Ledpfx Abeh I Nizo Ujrt shaft Ø: 45 mm strip width: 300 mm strip thickness: 2 mm

Condition: new, maximum load weight: 35,510 kg, overall weight: 43,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory with vehicles available immediately and in the short term on our website. Excerpt from the equipment. Complete equipment available upon request. Chassis: * Welded construction made of high-quality steel profiles with continuous profile cross members, designed for high point loads. Underride guard, width approx. 700 mm, outer frame as UNP profile, wear plate approx. 8 mm, goose neck height front approx. 130 mm Fifth wheel coupling: * 2-inch kingpin Underrun protection: * Bolted design, according to EC Side impact protection: * According to EC, made of aluminum profiles, anodized Kingpin supports: * 2 x 12 t kingpin supports with leveling foot and one-sided operation on the right side Axles: * 3 x 9 t air suspension axle, manufacturer SAF, disc brakes 22.5" * Total stroke approx. 180 mm, raising and lowering device via rotary slide valve Braking system: * Two-circuit compressed air braking system according to EC with EBS and RSS, automatic load-dependent regulation, spring brake cylinders as parking brake, interlockable coupling heads permanently mounted on the front cross member, without connection line to the towing vehicle Tires: * 6 tires, 385/55 R22.5 160J on steel rim 11.75 X 22.5 ET 120, manufacturer of our choice * Tire pressure monitoring system (TPMS) via CAN-bus system of the EBS Fenders: * According to EC Spare wheel holder: * None Load securing: * 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 5.0 t * 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 2.0 t * In the outer frame, holes approx. every 400-600 mm for attaching lashing straps Front wall: * Reinforced steel construction, fixed, approx. 1,400 mm high * Interior lined with approx. 9 mm screen-printed flooring (approx. 1,250 mm high) Floor: * Approx. 28 mm Z-hardwood floor embedded in the outer frame with galvanized omega steel profiles Lighting: * According to EC, 24 volts, with multi-chamber lights, LED side marker lights, LED position lights white front, LED outline lights rear, license plate lights Lrsdszhd Ncepfx Ab Uet * Lane-keeping lights LED * 1x15- and 2x7-pole connector sockets on the front cross member Equipment: * Warning signs ECE 70 * Holder for rotating beacon, including rotating beacon * Foldable and extendable access ladder at the rear right (without platform) * 1 open box made of perforated sheet metal, transverse to the direction of travel, approx. 600 x 450 x 2,430 mm, galvanized, behind the axles Painting: * Front wall: RAL 5010 azure blue * Chassis: Hot-dip galvanized * Outer frame: Hot-dip galvanized + RAL 5010 azure blue * Crossbars: RAL 5010 azure blue * Kingpin supports: Aluminum, anodized * Underrun protection: white (RAL 9016 traffic white) * Attachments: galvanized/KTL black * Rims: silver Accessories: * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of crossbar pockets in the outer frame, evenly distributed * 4 rows of crossbar pockets transverse to the loading area * 20 pieces of crossbars made of galvanized tube 80/50, total length approx. 1,200 mm * Inside on the front wall, a magazine for 20 pieces of plug-in crossbars * 5 x 25 mm side boards and rear wall made of anodized aluminum hollow profiles, foldable and removable, removable crossbars * Side board magazine under the chassis left and right * Sliding rails for side boards * Container locks for 1 x 40" and 2 x 20" containers, flush at the rear * Containe

Condition: used, maximum load weight: 14,600 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 06/2025, Equipment: ABS, Dimensions and Weights External length approx. 7,055 mm Overall width approx. 2,500 mm Loaded ride height approx. 1,285 mm Rollway length approx. 6,890 mm Wheelbase 5,240 mm Complete empty weight approx. 3,400 kg Gross weight approx. 18,000 kg Payload approx. 14,600 kg For containers with a length of 5,000 to 7,000 mm according to DIN 30722. Chassis Chassis construction made of welded I-beams in QSTE steel. 4 container locks and top slide lock are pneumatically operated. Side guards closed according to Directive 89/297/EEC. (Item 2) Spare wheel holder in basket design for 2 spare wheels including mounting kit for 1. Bogie Bogie 1300 FM including ball-bearing turntable 90/1300/22 (low-maintenance). Drawbar Drawbar 2600/1300/100/30 with height adjustment (tension spring with turnbuckle) Drawbar with DIN drawbar eye, inner diameter 40 mm, outer diameter 110 mm, thickness 30 mm. Axles 2 x 9 t axles for 22.5 disc brakes, manufacturer's choice. Brake disc diameter approx. 430 mm, Wheel mounting by centering according to DIN 74 361 Part 3. Braking system Air brake system according to EU directive with Duomatik coupling head Conventional air suspension system, EBS type 4S/3M, electronic braking system with ROLL Stability, double-diaphragm spring-loaded cylinder on the rear axle, release valve for separate release of the spring-loaded brake. Lighting system 24-volt full LED lighting system according to Directive 76/756/EEC with multi-chamber light and license plate light integrated into the light panel, manufacturer's choice. 1 x 15-pin connector 6 x LED side marker reflectors with flashing indicators 2 x white LED front marker lights 2 x separately mounted LED rear lane departure lights 1 x LED reversing light Wheels/Tires Regional transport tires: 4 x 385/55R22.5 (11.75x22.5) Steel wheels, offset 120, unpainted wheel nuts. Including tire pressure monitoring Underrun protection Aluminum underrun protection. Two vertical delta bumper profiles protect the rear during loading and unloading. Accessories 4 plastic half-shell fenders, front and rear, single-wheel fenders 4 anti-spray mud flaps, neutral 1 lockable plastic toolbox 1 wheel chock with bracket 1 license plate holder 1 A-plate for transporting waste materials 1 hanging net box 2 container guides Paintwork Chassis color: MB 7350 Nova Gray Sliding attachment: MB 7350 Nova Gray Wheel hub color: black cathodic dip-coat Wheel rim color: RAL 9006 Silver Rear contour markings: red Side contour markings: white Closed SSE: RAL 7001 Silver Gray Rear end/light panels: RAL 7001 Silver Gray Underrun protection: anodized aluminum (silver) Locking hook, container guide: yellow Documentation Commissioning and braking report Operating instructions Axle manufacturer's maintenance instructions DEKRA Expert opinion Side guard closed Hanging net box, galvanized Lrsdpovzdw Dsfx Ab Ujt All information is provided without guarantee. Errors and omissions excepted. Subject to prior sale.

Condition: excellent (used), Year of construction: 2003, 683 USED Industrial Kaiser roll line, hamburger line, and hot dog line. NOTE: It is possible to see the line in operation in Poland. EQUIPMENT: - bowl tipper, - KOENIG 6-row divider-rounder, - pre-proofer, - bun labeling station, - final proofer, - tunnel oven, - feed conveyors, - bun counter. 1. Koenig Roll Line TECHNICAL DATA: - Capacity: 3,000-12,000 rolls/h - Weight: 50-130 g - Labeling: 3 roll symbols, Kaiser roll, Portuguese roll - Koenig roll line length: 900 cm, height: 376 cm, width: 180 cm 2. Final Proofer TECHNICAL DATA: - Final Proofer equipped with temperature and humidity control - Dimensions: L: 460 cm, W: 340 cm, H: 380 cm 3. Ciberpan Tunnel Oven TECHNICAL DATA: - Dimensions: W: 386 cm, L: 29 m, H: 290 cm - Baking belt working width: 245 cm, Baking belt length: 28.8 m - Baking area: 70 m² - Weishaput gas burner: 50-55 kW - Equipped with a burner and steam generator. 4. Affeld Roll Counter TECHNICAL DATA: Lrodpfxsy Skr Ij Ab Ujt - Year of manufacture: 2012. - Dimensions: width 200 cm, length 227 cm, height 240 cm. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, rack oven, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices.

Condition: used, functionality: fully functional, empty load weight: 690 kg, maximum load weight: 2,810 kg, overall weight: 3,500 kg, first registration: 02/2013, loading space length: 2,800 mm, loading space width: 1,750 mm, loading space height: 600 mm, total length: 4,900 mm, total width: 2,330 mm, total height: 950 mm, trailer brake: trailer braked, Year of construction: 2013, SDAH Platform Trailer: + Gotha + First registration: 14.02.2013 + TL 35.27x17C + Trailer for roll-off container transport / low-loader + Truck towing eye + Loading area: 280 cm x 175 cm + Loading edge: 60 cm Lsdpfx Asymfb Ejb Ujrt + Container rail: 220 cm + Lashing eyes + Unladen weight: 690 kg; permissible total weight: 3,500 kg; payload: 2,810 kg + Overall dimensions: 490 cm x 233 cm x 95 cm (LxWxH) Receive all newly listed vehicles by email – subscribe to our NEWSLETTER! Errors and omissions excepted; subject to prior sale!

Condition: used, maximum load weight: 35,480 kg, overall weight: 43,000 kg, axle configuration: 3 axles, first registration: 05/2026, next inspection (TÜV): 05/2027, Equipment: ABS, Excerpt from Equipment: Chassis: Welded construction made of high-quality steel profiles with continuous profile crossmembers, designed for high point loads. Underride guard, width approx. 700 mm, outer frame as a UNP profile, wear plate approx. 8 mm, neck height at the front approx. 130 mm. Coupling device: 2-inch kingpin. Underrun protection: bolted design, according to EC. Side underrun protection: according to EC, made of aluminum profiles, anodized. Saddle supports: 2 x 12 t saddle supports with leveling foot and single-sided operation on the right-hand side. Axles: 3 x 9 t air suspension axle unit, disc brakes 22.5". Total stroke approx. 180 mm, raising and lowering device via rotary slide valve. Braking system: Two-circuit compressed air braking system according to EC with EBS and RSS, automatic load-dependent regulation, spring brake cylinders as parking brake, interlockable coupling heads permanently mounted on the front crossmember, without connection line to the tractor unit. Tires: 6 tires, 385/55 R22.5 160J on steel rim 11.75 X 22.5 ET 120, manufacturer of our choice. Tire pressure monitoring system (TPMS) via CAN bus system of the EBS. Fenders: according to EC. Spare wheel holder: none. Load securing: - 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 5.0 t - 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 2.0 t - In the outer frame, holes for attaching lashing straps are provided every approx. 400-600 mm. Front wall: Reinforced steel construction, fixed, approx. 1,400 mm high. Internally lined with approx. 9 mm screen-printed material (approx. 1,250 mm high). Floor: approx. 28 mm Z-hardwood floor recessed in the outer frame with galvanized omega steel profiles. Lighting system: according to EC, 24 Volt, with multi-chamber lights, LED side marker lights, LED position lights white at the front, LED outline lights at the rear, license plate lights. Lane departure warning lights LED. 1x15- and 2x7-pole plug connections on the front crossmember. Equipment: - 2 wheel chocks with holder - Warning signs ECE 70 - Holder for rotating beacon, incl. rotating beacon - 2 rubber impact buffers at the rear - Access ladder at the rear right, foldable and extendable (without platform) - 1 open box made of perforated sheet, transverse to the direction of travel, approx. 600 x 450 x 2,430 mm, galvanized, behind the axles. Painting: Front wall: RAL 3002 carmine red. Chassis: hot-dip galvanized. Outer frame: hot-dip galvanized + RAL 3002 carmine red. Center beams: RAL 3002 carmine red. SSV: Aluminum, anodized. Underrun protection: white (RAL 9016 traffic white). Components: galvanized/KTL black. Rims: silver. Outline marking: complete, yellow. Incl. special accessories. First axle liftable, with fully automatic, load-dependent lift control. 10 pairs of stake pockets in the outer frame, evenly distributed. 4 rows of stake pockets transverse to the loading area. 20 stakes made of galvanized tube 80/50, total length approx. 1,200 mm. Inside the front wall, a magazine for 20 stakes. 5 x 25-mm side boards and rear wall made of anodized aluminum hollow profiles, foldable and removable, removable Kinnegrip stakes. Side board and stake magazine: under the chassis, left and right, sliding rails for side boards and stakes. Container locks for 1 x 40' and 2 x 20' containers, rear-flush. Container locks for 1 x 20' container in the center. Work lights on the lamp carrier (switched via reverse gear). 2 Lredpfxszrq U Hs Ab Ust

Condition: like new (used), functionality: fully functional, UV roller painting line Barberan , DMC , Cefla , Burkle 1300 mm. Complete : 1. Barberan roller coater 2. Barberan roller coater reverse 3. UV 1 tube dryer 4. Barberan roller coater 5. UV 2 tube dryer 6. DMC grinding machine . 7. Brush machine . Lrodpfx Abjvcmi Ee Uot 8. Barberan roller coater 9. UV 2 tube dryer 10. Burkle roller coater 11. UV 2 tube dryer

Condition: used, maximum load weight: 14,040 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 02/2016, next inspection (TÜV): 05/2027, Equipment: ABS, * ABS * Front stabilizer Lsdpfxjzxi Sko Ab Ujrt * Rear support * Adjustable drawbar via offset plate * Disc brakes * BPW-ECO axles ----Superstructure: Sliding roll-off container trailer for a total container length of up to 7.7 meters, pneumatic container locking system. For sale to commercial businesses only. IN THE CASE OF EXPORT, ONLY THE NET PRICE IS TO BE PAID!!!!! ALL INFORMATION IS WITHOUT GUARANTEE, INCLUDING EQUIPMENT AND ACCESSORIES. Our general terms and conditions (see imprint) form the basis for all purchase agreements, invoices, pro forma invoices, orders, and sales negotiations.

Condition: good (used), Roll Lam 120CS Roll Laminator Double-sided cold lamination, original base included, Lamination width: 1200 mm Manufactured by: Biedermann GmbH Roll laminator equipped with silicone-coated rollers. Technical specifications: Working width / rollers: 120 cm Lsdszuryvopfx Ab Uert Working width / roll width 130 cm Dimensions (W x D x H): 170 x 68 x 125 cm Infeed table height: 92 cm Weight (with base): approx. 168 kg Maximum board thickness: up to 25 mm Roller diameter: approx. 112 mm (silicone-coated) Maximum speed: approx. 3.5 m/min Power supply: 230 V / 0.07 kW

Year of construction: 1995, condition: ready for operation (used), functionality: fully functional, working width: 1,450 mm, mount diameter: 800 mm, number of feed rollers: 2, section length (max.): 1,560 mm, The machine is equipped with 2 unwinding stations, allowing you to process double the quantity of cut lengths simultaneously. The machine speed is 50 m per minute. In the longitudinal direction, 3 knives can be set, enabling the width to be halved and a trim to be cut off on each side. The unwinding station is equipped with 3-inch and 6-inch pneumatic expanding shafts. We have successfully processed BO PET films with thicknesses ranging from 36 to 250 microns. The machine is fully connected, can be inspected daily, and, by arrangement, customer material can also be tested. We would disassemble and load the machine, either onto a truck or into a container. Lrsdpfx Aey D Edcsb Ujt