Used Haas St10 for sale (365)

Condition: ready for operation (used), Year of construction: 2023, operating hours: 2,408 h, spindle speed (max.): 4,500 rpm, travel distance X-axis: 239 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 584 mm, spindle motor power: 22,400 W, overall weight: 5,534 kg, number of axes: 4, This 4-axis HAAS DS30Y horizontal turning machine was manufactured in 2023. It features a maximum part swing of 533 mm and a maximum cutting diameter of 349 mm. The machine is equipped with a robust turret that accommodates 12 tools, ensuring versatility in operations. If you are looking to get high-quality turning capabilities, consider the HAAS DS30Y machine we have for sale. Contact us for further details. • Capacities: • Chuck size (main): 10.0 in / 254 mm • Max part swing: 21.0 in / 533 mm • Max cutting diameter (with BMT65 turret): 13.75 in / 349 mm • Max cutting length (varies with workholding): 32.5 in / 826 mm • Bar capacity: 3.00 in / 76 mm • Between centers: 32.5 in / 826 mm • Feedrates (rapids): • X: 472 ipm / 12.0 m/min • Y: 472 ipm / 12.0 m/min • Z: 945 ipm / 24.0 m/min • Axis motors (max thrust): • X: 4100 lbf / 18238 N • Y: 2300 lbf / 10231 N • Z: 5100 lbf / 22686 N • Main spindle: • Spindle nose: A2-6 • Drive system: Direct speed, belt drive • Max torque: 275 ft-lbf @ 500 rpm / 373 Nm @ 500 rpm • Draw tube bore: 3.0 in / 76 mm • Spindle bore: 3.50 in / 88.9 mm • Main spindle C axis: • Max speed: 60 rpm • Max rating: 5.0 hp / 3.7 kW • Positioning (±): 0.01° • Brake diameter: 13.9 in / 353 mm • Brake holding torque: 250 ft-lbf / 339 Nm • Control type: Interpolated motion and positioning • Secondary spindle: • Chuck size: 8.3 in / 210 mm • Spindle nose: A2-5 • Drive system: Direct speed, belt drive • Max rating: 15.0 hp / 11.2 kW • Max speed: 4000 rpm • Max torque: 100 ft-lbf @ 870 rpm / 135.6 Nm @ 870 rpm • Spindle bore ø (non-through): 0.81 in / 20.7 mm • Secondary spindle C axis: • Max rating: 5.0 hp / 3.7 kW • Max speed: 60 rpm • Positioning (±): 0.01° • Brake diameter: 8.5 in / 216 mm • Brake holding torque: 140 ft-lbf / 190 Nm • Control type: Interpolated motion and positioning • Secondary spindle positioning (M119): • Positioning (±): 0.02° • Brake diameter: 8.5 in / 216 mm • Control type: Positioning only • Turret: • Number of tools: 12 stations • OD vs ID tools: Any combination (will vary with turret) • Boring bar rear clearance (from back of turret): 4.00 in / 102.0 mm • Live tooling: • Max speed: 4000 rpm • Drive ratio: 1:1 • Tooling: BMT65 • General: • Coolant capacity: 55 gal / 208 L • Air requirements: • Air required: 4 scfm @ 100 psi / 113 L/min @ 6.9 bar • Inline air hose: 3/8 in • Coupler (air): 3/8 in • Minimum air pressure: 80 psi / 5.5 bar Lhodpfxjzh Eh To Ag Aok • Electrical specification: • Spindle speed: 4500 rpm • Drive system: Direct speed, belt drive • Spindle power: 30.0 hp / 22.4 kW • Input AC voltage (3-phase) – low: 220 VAC; full load amps: 70 A • Input AC voltage (3-phase) – high: 440 VAC; full load amps: 35 A • Dimensions – shipping: • Domestic pallet: 171 in x 90 in x 98 in / 434 cm x 229 cm x 249 cm • Export pallet: 171 in x 90 in x 98 in / 434 cm x 229 cm x 249 cm Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2019, operating hours: 4,456 h, functionality: fully functional, machine/vehicle number: 1163744, travel distance X-axis: 1,016 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, workpiece weight (max.): 1,814 kg, spindle speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel, X-axis: 1,016 mm Travel, Y-axis: 660 mm Travel, Z-axis: 635 mm Spindle speed: 10,000 rpm Rapid traverse rate, X-axis: 18,000 mm/min Rapid traverse rate, Y-axis: 18,000 mm/min Rapid traverse rate, Z-axis: 18,000 mm/min Feed length, X-axis: 1,016 mm Feed length, Y-axis: 660 mm Feed length, Z-axis: 630 mm Feed rate, X-axis: 12,700 mm/min Feed rate, Y-axis: 12,700 mm/min Feed rate, Z-axis: 12,700 mm/min Workpiece length (max.): 1,370 mm Workpiece width (max.): 610 mm Workpiece height (max.): 630 mm Workpiece weight (max.): 1,814 kg Table width: 610 mm Table height: 630 mm Table length: 1,372 mm Table load capacity: 1,814 kg Number of tool positions in the tool magazine: 30 MACHINE DETAILS Operating hours: 20,865 h (as of July 26, 2026) Machining hours: 4,456 h (as of July 26, 2026) Cycle hours: 6,745 h (as of July 26, 2026) Control system manufacturer: Haas Rated power: 45 kVA Torque: 460 Nm Spindle motor power: 44.7 kW Dimensions (L x W x H): 1,370 x 660 x 630 mm EQUIPMENT Chip conveyor with 4 additional feed screws ISO 50 tool holder 30-position automatic tool changer (ATC) RTAP-3 synchronized thread cutting TSC 300 psi (21 bar) Coolant cooler Programmable coolant nozzle MIN QTY LUBE (minimum quantity lubrication) Automatic air nozzle Air cooling through the spindle Renishaw WIPS High Speed Machining Lhedpszlxnhjfx Ag Aek ACF 25-micron filter Control cabinet cooler Mist separator 4th axis pre-wired DWO/TCPC WIFI connection to the local network WIFI camera Automatic door 15 tool holders

Condition: ready for operation (used), Year of construction: 2023, operating hours: 1,775 h, spindle speed (max.): 4,500 rpm, travel distance X-axis: 239 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 584 mm, spindle motor power: 22,400 W, number of axes: 4, This 4-axis HAAS DS30Y horizontal turning machine was manufactured in 2023. It features a maximum part swing of 533 mm and a maximum cutting diameter of 349 mm. The machine is equipped with a robust turret that accommodates 12 tools and offers a maximum cutting length of 826 mm. If you are looking to get high-quality turning capabilities, consider the HAAS DS30Y machine we have for sale. Contact us for further details regarding this machine. • Capacities (S.A.E / Metric) • Chuck size: 10.0 in (254 mm) • Max part swing: 21.0 in (533 mm) • Max cutting diameter (with BMT65 turret): 13.75 in (349 mm) • Max cutting length (varies with workholding): 32.5 in (826 mm) • Bar capacity: 3.00 in (76 mm) • Between centers: 32.5 in (826 mm) • Feedrates (S.A.E / Metric) • Rapids on X: 472 ipm (12.0 m/min) • Rapids on Y: 472 ipm (12.0 m/min) • Rapids on Z: 945 ipm (24.0 m/min) • Axis Motors (S.A.E / Metric) • Max thrust X: 4100 lbf (18,238 N) • Max thrust Y: 2300 lbf (10,231 N) • Max thrust Z: 5100 lbf (22,686 N) • Main Spindle (S.A.E / Metric) • Spindle nose: A2-6 • Drive system: Direct speed, belt drive • Max torque: 275.0 ft-lbf @ 500 rpm (373.0 Nm @ 500 rpm) • Draw tube bore: ø 3.0 in (76 mm) • Spindle bore: ø 3.50 in (88.9 mm) • Main Spindle C Axis (S.A.E / Metric) • Max speed: 60 rpm • Max rating: 5.0 hp (3.7 kW) • Positioning (±): 0.01° • Brake diameter: 13.9 in (353 mm) • Brake holding torque: 250 ft-lbf (339 Nm) • Control type: Interpolated motion and positioning • Secondary Spindle (S.A.E / Metric) • Chuck size: 8.3 in (210 mm) • Spindle nose: A2-5 • Drive system: Direct speed, belt drive • Max rating: 15.0 hp (11.2 kW) • Max speed: 4000 rpm • Max torque: 100.0 ft-lbf @ 870 rpm (135.6 Nm @ 870 rpm) • Spindle bore ø (non-through): 0.81 in (20.7 mm) • Secondary Spindle C Axis (S.A.E / Metric) • Max rating: 5.0 hp (3.7 kW) • Max speed: 60 rpm • Positioning (±): 0.01° • Brake diameter: 8.5 in (216 mm) • Brake holding torque: 140 ft-lbf (190 Nm) • Control type: Interpolated motion and positioning • Secondary Spindle Positioning (M119) (S.A.E / Metric) • Positioning (±): 0.02° • Brake diameter: 8.5 in (216 mm) • Control type: Positioning only • Turret (S.A.E / Metric) • Number of tools: 12 stations • OD vs ID tools: Any combination (will vary with turret) • Boring bar rear clearance (from back of turret): 4.00 in (102.0 mm) • Live Tooling (S.A.E / Metric) • Max speed: 4000 rpm • Drive ratio: 1:1 • Tooling: BMT65 • General (S.A.E / Metric) • Coolant capacity: 55 gal (208 L) • Air Requirements (S.A.E / Metric) • Air required: 4 scfm @ 100 psi (113 L/min @ 6.9 bar) • Inline air hose: 3/8 in • Coupler (air): 3/8 in • Air pressure min: 80 psi (5.5 bar) • Electrical Specification (S.A.E / Metric) • Drive system: Direct speed, belt drive • Spindle power: 30.0 hp (22.4 kW) • Input AC voltage (3 phase) - Low: 220 VAC; Full load amps (Low): 70 A • Input AC voltage (3 phase) - High*: 440 VAC; Full load amps (High*): 35 A • Dimensions - Shipping (S.A.E / Metric) • Domestic pallet: 171 in x 90 in x 98 in (434 cm x 229 cm x 249 cm) • Export pallet: 171 in x 90 in x 98 in (434 cm x 229 cm x 249 cm) Lodpfx Agszhwx Do Aehk Additional equipment • Bar feeder Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2007, spindle speed (max.): 2,400 rpm, travel distance X-axis: 287 mm, travel distance Z-axis: 864 mm, overall weight: 7,000 kg, controller manufacturer: HAAS, number of axes: 3, This 3-axis HAAS SL 30TBHE was manufactured in 2007. It features a maximum turning diameter of 406 mm and a maximum turning length of 864 mm. The machine is equipped with a chuck diameter of 315 mm and a spindle bore of 103 mm. If you are looking to get high-quality turning capabilities, consider the HAAS SL 30TBHE CNC lathe we have for sale. Contact us for further details. • Configuration: 3-axis machine with driven tools; no counter spindle • Spindle bore: 103 mm Ledpfx Agozhwlqo Aehk • Chuck diameter: 315 mm • Max turning diameter: 406 mm • Max turning diameter over saddle: 368 mm • Max turning length: 864 mm • Tool turret capacity: 12 positions • Live tooling: Yes Additional equipment • Included tooling: 1 live tool + additional accessories (unspecified) Technical Specification Counter Spindle No Driven Tools Yes

Condition: excellent (used), Year of construction: 2016, With B + C axis Working travels 762 x 508 x 508 mm Table diameter 500 mm Spindle taper 40 Spindle speeds -12'000 rpm Tool changer 40 Pos. Control HAAS Coolant through spindle Misc.accessories MARCELS MASCHINEN CH Lhedpfx Agolhqyde Ask

Condition: good (used), Year of construction: 2006, Description: Lhsdpfszlhvzsx Ag Ask The machine is in good technical condition, and can be tested upon prior arrangement. Control system: Haas CNC. Maximum turning diameter: 406 mm / 16". Maximum turning length: 1,219 mm / 48". Distance between centers: 1,219 mm / 48". Swing over carriage/cross slide: approx. 282 mm / 11.1". X-axis travel: 203 mm / 8". Z-axis travel: 1,219 mm / 48". Spindle: A2-6. Spindle bore: 76.2 mm / 3.00". Spindle speed: 0–2,000 rpm. Spindle power: 12 HP / approx. 8.9 kW. Torque: approx. 203 Nm at 150 rpm. Chuck: typically 10" / 254 mm. Tailstock: manual, depending on configuration. Weight: approx. 2,087 kg. Machine dimensions: approx. 2,515 × 1,727 × 1,981 mm (operating dimensions). Electrical connection: 195–260 V, 3-phase / approx. 25 A or 1-phase 240 V / 40 A, depending on configuration.

Condition: like new (used), Year of construction: 2023, operating hours: 800 h, functionality: fully functional, machine/vehicle number: SN3128158, turning diameter over cross slide: 533 mm, turning length: 572 mm, spindle bore: 63 mm, spindle speed (max.): 4,000 rpm, New condition + tooling + bar fender Ljdpfx Agsvwz T Uj Ajhk

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 2,134 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, table load: 1,814 kg, spindle speed (max.): 8,100 rpm, The machine can be inspected while powered on during production! TECHNICAL DETAILS Travel range, X-axis: 2,134 mm Travel range, Y-axis: 813 mm Travel range, Z-axis: 762 mm Max. spindle speed: 8,100 rpm Spindle motor power: 22.4 kW Lhsdpjzg Drzefx Ag Aek Max. torque: 122.0 Nm at 2,000 rpm Table dimensions: 2,134 x 711 mm Max. load capacity on table: 1,814 kg Number of tool magazine slots: 31 Distance from spindle nose to machine table (max.): 864 mm Distance from spindle nose to table (min.): 102 mm MACHINE DETAILS Control system: HAAS Table dimensions: 2,134 x 711 mm Max. load capacity on table: 1,814 kg EQUIPMENT Documentation/Manual Chip conveyor

Condition: good (used), Franz Haas Wafer Stick Baking Oven, Model EWB 1/1, completely refurbished. The machine is constructed from ASIS 304 stainless steel (with the main frame made of carbon steel). The oven is equipped with a rotating ring, which has adjustable speed control to achieve the desired baking characteristics for the wafer sticks. The ring has been cleaned and checked (re-aligned), and the supports/bearings are brand new. Fans have been replaced with new units. The exhaust outlet and flange have been replaced for quick installation. The machine comes with two extruders with bushings for ribbon forming and tube diameter shaping. Equipped with a cutting knife featuring a pneumatic actuator and photoelectric sensor for precise cutting (tube length adjustment is possible). The oven includes a stainless steel batter tank mounted on a frame with a trolley. Fitted with pumps that feed batter from the tank onto the ring surface. Comes with a new control panel and a new gas pressure regulator. Speeds of the ring and pumps are adjustable via frequency inverters. Dimensions: length 3200 mm, width 1400 mm, height 1700 mm. The machine is powered by natural gas, high-methane type, symbol E (previously GZ 50). Electrical requirements: 3x400V / 16A, consumption approx. 2.5/3 kWh. The machine has undergone a complete overhaul. All thermal elements have been replaced with new, environmentally-friendly components—resulting in lower gas consumption and enhanced efficiency. Lhsdsywgaxepfx Ag Ask Output: approx. 120-150 kg per 8 hours.

Condition: new, Coolant mixer for Haas CNC machines. Ledpfxjzllbhj Ag Ajhk

Condition: excellent (used), Year of construction: 2016, operating hours: 13,000 h, functionality: fully functional, Vertical machine center Haas VM 6 with below options 12000 rpm spindle Lhodsyb S U Uopfx Ag Ask HSS Touch probe Tool setter Through spindle coolant chip auger

Condition: used, Year of construction: 2014, operating hours: 7,500 h, 5-AXIS MACHINING CENTER Lhedpfezminnjx Ag Aek BRAND: HAAS VF-3 SS YEAR OF FIRST INSTALLATION: 2014 TABLE DIMENSIONS: 1,219 mm x 457 mm MAXIMUM TABLE LOAD: 800 KG TRAVEL: X: 1,016 mm Y: 508 mm Z: 635 mm SPINDLE SPEED: 12,000 RPM TOOL MAGAZINE: 40 POSITIONS HIGH PRESSURE / INTERNAL SPINDLE COOLING RENISH PROBE PRESETTING ADJUSTABLE COOLANT NOZZLE

Condition: like new (used), Year of construction: 2024, operating hours: 660 h, functionality: fully functional, overall weight: 8,255 kg, HAAS VF-6SS Vertical Machining Center – 2024 2024 HAAS VF-6SS Vertical Machining Center in excellent condition, purchased new in 2024 and with very low operating hours. The machine has been used only for a specific production project and remains in outstanding mechanical and cosmetic condition. Equipment HAAS HRT310 Rotary Table (4th Axis) HTS9 Tailstock WIPS – Wireless Intuitive Probing System Through Spindle Coolant (21 bar) Ledpfx Aszrhrcog Ajhk Through Tool Air Blast (TAB) High Speed Machining (HSM) 12,000 rpm Direct Drive Spindle 22.4 kW Spindle Motor Haas Next Generation Control Ethernet & USB Automatic Lubrication The machine can be inspected under power in Portugal. Immediately available.

Condition: like new (used), Year of construction: 2024, operating hours: 50 h, functionality: fully functional, total height: 2,290 mm, total length: 5,760 mm, total width: 4,440 mm, overall weight: 5,760 kg, HAAS ST-35 CNC LATHE – ONLY 50 HOURS – LIKE NEW – FULLY EQUIPPED HAAS ST-35 CNC Turning Center in outstanding condition with only 50 operating hours. The machine was purchased for a specific production project and has seen very limited use. It is in excellent mechanical and cosmetic condition and is ready for immediate production. Main Features Programmable Tailstock Chip Conveyor Lhjdpfx Aezrhinog Ajk High Pressure Coolant Automatic Tool Presetter (ATP) Haas Next Generation Control (NGC) Ethernet & USB Connectivity Touch Screen Control Work Light Complete documentation The machine has always been operated in a clean industrial environment and maintained according to Haas recommendations. The machine can be inspected under power in Portugal. Additional photos, videos and technical information are available upon request. Price: €60,000 + VAT

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 2,134 mm, travel distance Y-axis: 1,016 mm, travel distance Z-axis: 762 mm, controller model: HASS, table width: 914 mm, table length: 2,134 mm, table load: 1,800 kg, overall weight: 11,340 kg, spindle speed (min.): 40 rpm, spindle speed (max.): 7,500 rpm, coolant supply: 15 bar, distance table center to spindle nose: 864 mm, spindle motor power: 22 W, spindle nose: ISO 40, number of slots in tool magazine: 40, tool length: 406 mm, tool diameter: 63 mm, tool weight: 5,500 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, USED ​​vertical machining center with HAAS CNC Ljdpfx Agswrfams Ajhk

Condition: ready for operation (used), Year of construction: 2019, spindle speed (max.): 4,000 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 406 mm, spindle motor power: 14,900 W, number of axes: 2, Horizontal turning machine manufactured in 2019. This HAAS ST 15 features a maximum cutting diameter of 356 mm and a cutting length of 406 mm. It includes a 12-station VDI turret and a hydraulic chuck diameter of 210 mm. If you are looking to get high-quality turning capabilities, consider the HAAS ST 15 machine we have for sale. Contact us for further details. • CNC Control: HAAS Next Generation Control (NGC) • Max cutting diameter: 356 mm • Max cutting length: 406 mm • Max bar capacity: 63.5 mm • Max swing diameter: 419 mm • Max spindle speed: 4,000 rpm • Spindle nose: A2-6 Ljdpezdrhlefx Ag Ajhk • Hydraulic chuck diameter: 210 mm • Spindle motor power: 14.9 kW (20 hp) • Turret type: 12-station VDI • X/Z axis rapids: 30.5 m/min Additional equipment • Automatic tool probe (tool setter) • Tailstock with hydraulic quill • Belt-type chip conveyor • Coolant system with tank and pump Technical Specification Counter Spindle No Driven Tools No

Condition: used, Year of construction: 2005, functionality: fully functional, travel distance Z-axis: 1,219 mm, rotational speed (max.): 2,000 rpm, travel distance cross slide: 203 mm, Flatbed Lathe Manufacturer: Haas Ledpfxewftdmj Ag Ashk Type: TL-2 S/N: XXXXX Year of Manufacture: 08-2005 On-time hours: n/a Control: Haas CNC Technical Parameters: ----- - 4-way tool post with Parat quick change system - Z travel: 1,219 mm - X travel: 203 mm - Swing over bed: 406 mm - Swing over slide: 282 mm - Spindle bore: 76 mm - Spindle speeds: 10 - 2,000 rpm - Coolant system - Tailstock / MT 4 - Weight: 2,100 kg Accessories: ----- - 3 Parat cartridges - 3-jaw chuck - Documentation

Condition: good (used), Trumpf Vectormark Type: VMc2 Lhedpfezdqcusx Ag Ajk Trumpf Vectormark laser marker with Fuchs extraction and filtration unit Trumpf Vectormark GREEN 532nm Trumpf VMc2 Laser marker, with frequency-doubled diode-pumped Nd:YAG laser with Hurryscan 10 - galvanometer head from Scanlab Fuchs extraction and filtration unit TKFD The integrated pre-separator ensures high filter capacity Different filter stages are possible and can be perfectly adapted individually Ideal for confined spaces – can be placed under a table or integrated into machines Welding fume extraction class W3, IFA certified TKFD can also be transported in the trunk without modification Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, functionality: fully functional, Tool holders for HAAS VF machines 80 pieces, size BT40, including HAAS draw bolts - 6x collet chucks OZ, clamping range Ø2-Ø16 - 3x collet chucks OZ, clamping range Ø2-Ø25 - 1x collet chuck ER32 - 3x shrink fit chucks Ø6 - 1x shrink fit chuck Ø8 - 2x shrink fit chucks Ø10 - 2x shrink fit chucks Ø12 - 1x hydraulic rotary chuck Ø20 - 1x short boring chuck Ø13 Röhm - 4x Weldon Ø6 - 8x Weldon Ø8 - 11x Weldon Ø10 - 10x Weldon Ø12 - 1x Weldon Ø14 - 5x Weldon Ø16 - 5x Weldon Ø20 - 2x MK1 tool holder - 1x MK2 tool holder - 1x MK3 tool holder - 2x milling cutter holder Ø16 - 1x long milling cutter holder Ø16 - 1x extra long milling cutter holder Ø22 - 2x long Weldon Ø6 Lhsdjzi Ebijpfx Ag Ajk - 2x long Weldon Ø8 - 2x long Weldon Ø10 - 1x extra long Weldon Ø8 - 1x extra long Weldon Ø10

Condition: excellent (used), Year of construction: 2020, Traverses XYZ: 610 x 406 x 406mm, 400mm Diameter table, max table weight 226kg, table tilt +120°, -35°, 22.4kW, 10000rpm, BT40, Ljdpfjzg Enqsx Ag Ajhk 30 station tool changer, coolant, swarf conveyor

Condition: excellent (used), Year of construction: 2019, Swing 806mm, Swing over cross slide 527mm, maximum cutting diameter 457mm, 762mm between centres, 584mm maximum cutting length, 0.01 degree C axis, 3000rpm Milling 3.7kW, +/- 50mm Y axis, 76mm Bar capacity, 22.4kW Spindle Motor, 3400rpm spindle, Lhjdpfxozg Efis Ag Ask 24m/minute rapid feedrate, 24 Station turret, swarf conveyor, tailstock, tool setter, coolant,

Condition: good (used), Year of construction: 2020, Maximum cutting diameter 305mm, maximum machining length 406mm, bar capacity 63.5 mm, spindle speed 4000 rpm, 20 hp spindle motor, Ljdpfx Agezg Edls Ajhk 12 station turret, coolant, and swarf conveyor, 3 jaw chuck, toolsetter,

Condition: ready for operation (used), Year of construction: 2013, operating hours: 989 h, travel distance X-axis: 1,016 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 406 mm, controller manufacturer: HAAS, table width: 267 mm, table length: 1,467 mm, table load: 159 kg, overall weight: 2,295 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 5,600 W, number of slots in tool magazine: 10, number of axes: 3, This 3-axis HAAS HAAS TM-2P was manufactured in 2013. It features an X-axis travel of 1016 mm, Y-axis travel of 406 mm, and Z-axis travel of 406 mm. The machine includes a table size of 1467 x 267 mm and a maximum table load of 159 kg. If you are looking to get high-quality machining capabilities, consider the HAAS HAAS TM-2P vertical machining centre we have for sale. Contact us for further details. • Max tool diameter: 89 mm • Positioning accuracy: 0.01 mm • Repeatability: 0.01 mm • Air pressure: 6.9 bar Lhodpfozcnzmox Ag Aek • Air consumption: 113 l/min • Power supply: 3 × 400 V, 50 Hz Technical Specification Taper Size ISO 40

Condition: excellent (used), Year of construction: 2013, Haas-Mondomix -Buhler , A-15, 2013, continuous aerator for mixing and whipping, marshmallow & nougat, choco pie, chocolate and creams for sugar confectionary and bakery with Touch screen control, with product pump In good condition. with mondotherm Lsdpfsf Azwzjx Ag Ajhk

Condition: excellent (used), Year of construction: 2016, operating hours: 581 h, feed length X-axis: 508 mm, feed length Y-axis: 406 mm, feed length Z-axis: 356 mm, controller manufacturer: Haas, spindle speed (max.): 6,000 rpm, number of spindles: 1, number of slots in tool magazine: 20, input voltage: 400 V, We are offering this excellent Haas Mini Mill 2 vertical machining center, manufactured in 2016. It was primarily used to process aluminum, with occasional work on other materials such as POM, MDF, and brass; steel was processed very rarely. A large selection of tools (almost exclusively for non-ferrous metals) is available and will also be sold. We would be happy to offer it as a set. Ledpezg E Hmefx Ag Aohk Total cycle time: 581 hours. The machine has been used infrequently and is therefore in very good condition. Includes a Renishaw measuring system. If you have any questions or require further information, please feel free to send us a message or call us.