Used Dr. Schenk Solarinspect for sale (4,838)

Condition: new, Year of construction: 2017, Gas flame treatment plant Arcotec FTS 4005 DR som, year KW42/2017, machine is new and unused and has CE marking, operating voltage 400V, power 7kw, gas type preset propane it can also be used natural gas, Burners 4x MB3-500S/2E, treatable material are metal sheets, Gsdod Rik Aopfx Anxoit The gas flame treatment plant is intended exclusively for the thermal pre-treatment of metal sheet surfaces in order to improve the adhesion of ink, laughter, adhesives, foam, etc. Machine has cost over 200000€!!

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 6214330001, overall weight: 89 kg, total height: 950 mm, power: 2.2 kW (2.99 HP), pressure (max.): 8 bar, noise level: 60 dB, new oil-free DENTAL piston compressor Dr Sonic 320-50-W-ES with attached double column adsorption dryer with sound insulation box and additional fan Oil-free piston compressor, two-cylinder, single-stage, max pressure 8 bar, built on 50 lt. internally coated tank with attached adsorption dryer. Ideal for 3 dental chairs – minimal space requirement due to compact design. Specifications: Type : Dr. SONIC 320-50-W-ES-3M Operating overpressure max : 8 bar Suction capacity : 320 l/min Effective delivery rate at 6 bar*) : 210 l/min Number of steps : 1 Number of cylinders : 2 Compressor speed : 1400 1/min Nominal power drive motor : 2,2 Motor protection class / insulation class : IP 54 / F Operating voltage / frequency : 230 /50 V/Hz Sound pressure level (DIN 45635 T13) : 60 dB(A) Tank volume : 50 litres Width : 700 mm Gisdpfx Asvlw Haenxot Depth : 500 mm Height : 980 mm Weight : 89 kg Compressed air connection : G 3/8

Condition: excellent (used), Year of construction: 2012, From the inventory of the Thuringian State Office for Consumer Protection, we are pleased to offer you this well-maintained "Chef-III" gel electrophoresis system from the global brand Bio-Rad, complete with all necessary accessories. The complete system was purchased in 2012 and has seen very little use. A total of only approximately 40 runs have been performed, which are documented accordingly in the equipment manual. All components have been regularly inspected and serviced and are in perfect optical and technical condition; there is no damage or malfunction whatsoever. The system consists of: Gisdpfxowf I Dzj Anxet - Power module - Chiller with chamber - Variable pump module - Cooler/cooling module - Accessories and documentation All components are in very good condition; as can be seen in the pictures, there are no visual or technical limitations or damage. Small scratches or discoloration are due to transport, but do not limit its use in any way. Shipping will be made within three business days after receipt of payment via an insured freight forwarder. You also have the option of picking up the device from us during regular business hours. The total weight of the system, including accessories and pallet, is approximately 100 kg. This sale is exclusively for commercial customers; you will, of course, receive a VAT invoice. Private buyers have the option of purchasing the device "on behalf of a customer." Direct commercial sales to private individuals are expressly excluded! The goods are sold excluding any warranty or liability for material defects. This exclusion does not apply to claims for damages resulting from grossly negligent or intentional breach of the seller's obligations, nor to any injury to life, limb, or health. For inquiries regarding prices or technical details, please contact us at the address provided.

Year of construction: 1991, condition: ready for operation (used), Dalex DR-F 2 0,35m/h³ 220 volts No. 109115732 year of manufacture 1991 Refrigerant R12--must be refilled-- Giodpfx Anoftbtmsxot

Condition: used, Year of construction: 1990, machine/vehicle number: 2316-3, Lg.no. 10622 Technical data: - Drilling capacity into solid steel ST 60 28 mm - Drilling capacity GG 25 40 mm - Thread cutting ST 60 M 30 - Thread cutting GG 25 M 40 - Drill spindle holder MK 3 - Spindle diameter 50 mm - Quill stroke 150 mm - 18 drilling spindle speeds 45 - 2240 rpm - 4 drilling feeds 0.1 - 0.45 mm - min. / max. distance spindle - table 300 / 700 mm - Drilling radius min / max 305 / 1005 mm - Table height 820 mm - Table size 1200 x 600 mm - Drive 400 V / 6 kW Gijdpfju Et Nbex Anxjt - Space requirement approx. W 1300 x H 2800 x D 2300 mm - Weight approx. 1500 kg - with: - Thread cutting device - hydr. columns + boom clamping - Coolant device - Vertical T-slots on the left side of the machine

Condition: good (used), Year of construction: 1992, machine/vehicle number: 2355-2, Offer 24416 Technical data: - Drilling capacity into solid steel ST 60 28 mm - Drilling capacity GG 25 40 mm - Thread cutting ST 60 M 30 - Thread cutting GG 25 M 40 - Drill spindle holder MK 3 - Spindle diameter 50 mm - Quill stroke 150 mm - 18 drilling spindle speeds 45 - 2240 rpm - 4 drilling feeds 0.1 - 0.45 mm - min. / max. distance spindle - table 300 / 700 mm - Drilling radius min / max 305 / 1005 mm - Table height 820 mm - Table size 1200 x 600 mm - Drive 400 V / 6 kW - Space requirement approx. W 1300 x H 2500 x D 2300 mm - Weight approx. 1500 kg - with: - thread cutting device Gijdpfxeufw S Ro Anxst - hydr. columns + boom clamping - Coolant device - Vertical T-slots on the left side of the machine

Condition: good (used), DONAU DR 23 – High-Speed Radial Drilling Machine Godpfsxzqausx Anxeit - Drilling capacity / steel approx. 28 mm - Arm reach 700 mm - Morse taper MK3 - Speed range 70-1550 rpm (gearbox) - Automatic feeds 0.075-0.3 mm - Thread cutting device - Drilling depth approx. 130 mm - Hydraulic clamping - Documentation Dimensions: LxWxH 2x1.7x1.9 meters / Weight 1900 kg Subject to errors and input mistakes

Condition: good (used), Schindler DR VCB 025 Biodyn 25 C BR Frequency Converter Schindler DR VCB 025 Biodyn 25 C BR ID. No. 59400893 Frequency Converter Input Giedpfxjtpwhvo Anxst 3AC 340...460V 50/60Hz IC1CS (400V): 21A Output 3A 0...400V 0...65Hz IC2CS: 25.5A IC2N: 21A You can find more items in other sizes – new and used – in our shop! International shipping costs upon request!

Condition: as good as new (ex-display), For sale Demag wheelblocks New and uses NB! we have more than 15,000 Demag parts in stock see our website or other ads Giodpsh Uqibjfx Anxjt

Condition: used, Auxiemba SERVOTECH ROB 20-II-DR Rotary Automatic Labelling Machine – Serial No. 306 Manufacturer Talleres Pupar, S.A. (brand: Auxiemba) San Sebastián, 169 – 08203 Sabadell, Barcelona, Spain Type Gsdpex N Ur Tjfx Anxsit Rotary automatic cold-glue labeller Industrial Applications Specifically designed for labelling cylindrical or conical containers in the beverage, food, cosmetics, or chemical sectors. Compatible with glass or plastic bottles, it provides high-precision labelling at high speeds on continuous production lines. Main Technical Specifications: - Model: SERVOTECH ROB 20-II-DR - Serial number: 306 - Year of manufacture: 2010 - Weight: 7430 kg - Technology: Rotary labelling using cold glue application - Drive system: Servo-motorized - Labelling stations: Multi-heads for wraparound or front label application - Structure: Stainless steel frame for wet/washdown environments 🧩 Machine Usage The SERVOTECH ROB 20-II-DR is a high-performance automatic labelling machine, designed to meet the speed and precision demands of modern industrial production lines. Thanks to its servo-driven rotary system, it guarantees consistent and accurate label positioning at high throughput rates. Suitable for both paper and synthetic labels applied with cold glue. ⚙️ Features / Differentiators This model stands out for its structural robustness, versatility in handling multiple container formats without slowing production, and servo technology that ensures label placement accuracy. The cold-glue system provides a clean finish with lower operating costs compared to hot-melt systems.

Condition: good (used), Exposure unit and drying cabinet Acosgraf Luxdryer DR 1316 Lights power 1080W for screen up to 130x160cm Gijdpfxovnwlzj Anxst quick and efficient drying with temperature and time settings strong and quick vacuum fast and precise screen exposure 230V very clean We ship everywhere in Europe (shipping cost to be added)

Year of construction: 1985, condition: ready for operation (used), Compression spring making machine. Most of the Schenker range of machines, as well as some Bamatec equipment is available with us. Godpof I Uumefx Anxjit

Condition: excellent (used), Description to follow! Gedpsyrhmzjfx Anxoit

Condition: excellent (used), Description to follow! Godpfx Aneyrhmujxoit

Condition: excellent (used), wire diameter - max. 2 mm Giedpjyrhmnefx Anxet

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: D32L/8407, Offer Number: D32L/8407 Machinetype: spring coiling machine Giodpfx Ajwzkr Henxot Make: SCHENKER Type: 20RU Constr. year: 1998 wire diameter: 0,5- 2 mm Location: In our warehouse

Condition: good (used), Included in delivery: 01x holder f. slide-through protection, used material color: sendzimir galvanized Manufacturer: SLP Giodpfxsipuggo Anxet leg A: approx. 200 x 140 mm leg B: approx. 200 x 38 mm opening dimension: approx. 52 x 32 mm for rectangular tube: 50 x 30 mm Weight/pc.: 0.930 kg

Year of construction: 1995, condition: ready for operation (used), A Schenker spring coiling machine including a 2-finger coiling system (left and right), a multiple stroke device and a Böhm MRS-1 length measuring device is available. Wire diameter range: 0.4mm-1.8mm, spring outer diameter: 2mm-30mm, production capacity: 400 springs/min, max. material strength: 2400N/mm², spring outer diameter range: 2mm-30mm, wire feed length: 30mm/470mm/770mm/1200mm. Machine dimensions X/Y/Z: approx. 1150mm/900mm/1450mm, weight: approx. 1000kg. In 2008, the drive motor was replaced by a frequency-controlled servo motor. Documentation available. On-site inspection is possible. Gedev Ip Smjpfx Anxoit

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, power: 7.5 kW (10.20 HP), saw blade diameter: 450 mm, tilt adjustment saw blade: 46 °, rotational speed (max.): 5,000 rpm, cutting width at rip fence: 1,300 mm, TECHNICAL DETAILS Saw blade diameter max.: 450 mm Cutting width at CNC parallel fence: 1,300 mm Max. speed: 5,000 rpm Infinitely variable adjustment Double roller carriage length: 3,000 mm Mitre angle stop length: 3,200 mm Digitally adjustable Table extension: 840 mm Pneumatic quick-clamp range: 0-90 mm 2 quick clamps MACHINE DETAILS Power: 7.5 kW EQUIPMENT CE marking Saw blade guard Double roller carriage with TIP-SERVO-DRIVE Gjdpfx Aney H Errexjit Air cushion table Spray device with remote control Front support roller 2 pneumatic quick clamps Digital mitre gauge L CNC parallel fence

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 18.03.7507, grinding width: 1,100 mm, grinding height: 150 mm, grinding belt length: 1,900 mm, grinding belt width: 1,100 mm, roller diameter: 150 mm, TECHNICAL DETAILS Maximum sanding width: 1,100 mm Maximum sanding height: 150 mm Abrasive belt length: 1,900 mm Abrasive belt width: 1,100 mm Roller diameter: 150 mm Max. working width: 1,100 mm Min. working height: 3 mm Max. working height: 152 mm Min. feed speed: 2.5 m/min Max. feed speed: 8 m/min Feed motor: 0.55 kW Feed speed regulation: Stepless MACHINE DETAILS Motor: 11 kW (15 HP) Voltage: 400 V Power consumption: 28 A Fuse: 32 A Output: 15.6 kW Giedpfey Nx Dyex Anxst Dimensions & Weight Dimensions (L x W x H): 1,900 x 1,800 x 2,200 mm Transport weight: 1,500 kg EQUIPMENT Sanding unit COMBI Pad sanding unit (position: top) Roller material: Rubber CE marking

Condition: like new (used), Year of construction: 2000, operating hours: 7,600 h, functionality: fully functional, *FANUC ROBODRILL T14-iBL DRILL TAP VMC (4 Axis)* Category: Vertical Machining Centers (VMC) Reference No.: 311119 Capacity: 700 X 400 X 330 MM Year of Construction: 2000 Technical Specification: SPINDLE Spindle Taper : BT 30 Spindle Speeds : 8000 RPM Spindle Motor : 3.7 / 5.8 kW WORKING CAPACITY Travels (XYZ) : 700 X 400 X 330 MM Guideways : LM ATC Tool Change Capacity : 14 Tools Gedpsx Ehi Isfx Anxjit CNC Control : Fanuc 16iM Additional Details: With Nikken 170 4th Axis

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,806 kg, axle configuration: 3 axles, first registration: 02/2022, total length: 13,400 mm, total width: 2,460 mm, suspension: air, color: white, Year of construction: 2021, Equipment: cooling unit, full service history, power assisted steering, Technical specifications FP 60 SMART. Cooling unit Thermo King SLX i 300-50, Diesel/Electric. Container type double rear doors, 3 piece aluminium hinges on each door half; quick replacement doo Tool box, PVC, left side behind the axles, dimensions approx. 650x490x450 mm. Fuel tank plastic, for approximately 240 ltr., tank opening on both sides, cover with cylinder lock. Tyres - 6 x 385/65 R22.5. Internal length: 13310mm. Internal width: approx. 2460mm. Internal height: 2650mm. Total height (unl Pallet box for 36 Euro-pallets. Gjdoyzdr Hspfx Anxoit Chassis MB 7350 NOVA GREY SDGL. Axles including hub RAL 9005 JET BLACK. Ventilation flap, at the front wall, at top of left side. Ventilation flap, at rear, left side at to spare wheel.

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,806 kg, axle configuration: 3 axles, first registration: 06/2018, total length: 13,400 mm, total width: 2,460 mm, suspension: air, color: white, Year of construction: 2018, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SAF axles Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Tool box, PVC, left side behind the axles, dimensions Gedpfx Ansy Rkpksxoit approx. 650x490x450 mm Fuel tank plastic, for approximately 240 ltr., tank opening on both sides, cover with cylinder lock EBS-braking system, 2S/2M, 2 sensors on 1 axle 1 pair(s) of load lock rails, horizontally, inserted into side walls Disc brakes 430 mm incl. 2 temperature sensor Ventilation flap, at the front wall, at top of left side, Ventilation flap, small, at rear, right si Lift axle control for 1st axle Low noise aluminium floor, suitable for PIEK floor, tested according to CSC/EN 283, reinforced at re Spare wheel holder as fixed basket for one spare wheel, right side, behind axles, 2nd spare wheel ho 1 spare wheel (6+1) tyres - 385/65R22.5 12 sets of double deck rails, type Airline, inserted into side walls, full length 1.600 mm from the Loading capacity 33 / 66 euro paletts Internal Length/width/heigth - 1331cm/246cm/265cm Gross vehicle weight: 39.000 kg Own weight - 8 813 kg 3 axles Pallet box for 24 Euro-pallets

Condition: new, functionality: fully functional, fuel type: electric, Year of construction: 2026, Spring & Hydraulic Cone Crusher: Design, Operation, and Technical Insights Cone crushers are vital in mining, metallurgy, and aggregate production, designed for secondary and tertiary crushing of hard and medium-hard materials. Among the most common types are the spring cone crusher and the hydraulic cone crusher, each offering distinct advantages in structure, performance, and control. Spring Cone Crusher The spring cone crusher is a traditional design that uses mechanical spring systems for overload protection. When uncrushable material enters the crushing chamber, the spring mechanism allows the bowl liner to move downward, preventing damage to the crusher. Once the foreign object passes, the springs restore the original position, ensuring continuous operation. Structural Composition: Main frame and base assembly Eccentric shaft and transmission system Fixed and moving cones (mantle and concave) Spring and adjustment mechanism Working Principle: Material is fed into the crushing chamber and compressed between the mantle and concave. The laminated crushing principle ensures that particles are crushed by both impact and pressure, producing uniform and well-shaped aggregates. Technical Highlights: Feed size: ≤300 mm Discharge size: 3–60 mm Capacity: 30–700 t/h Motor power: 75–400 kW Advantages: Simple structure, low maintenance cost, stable performance, and reliable overload protection. Applications: Widely used in crushing granite, basalt, iron ore, copper ore, and limestone. It is suitable for medium-scale operations where cost efficiency and durability are priorities. Hydraulic Cone Crusher The hydraulic cone crusher is an advanced evolution of the spring design, integrating hydraulic systems for improved automation, safety, and precision. It replaces the mechanical spring system with hydraulic cylinders that control the discharge opening and provide overload protection. Structural Composition: Main frame and eccentric assembly Hydraulic cylinders and control system Crushing chamber with optimized liner design Automatic lubrication and hydraulic adjustment units Working Principle: The hydraulic system adjusts the discharge opening and releases pressure automatically when uncrushable material enters. This prevents mechanical damage and allows the crusher to resume operation quickly. The combination of high-speed eccentric motion and optimized chamber geometry enhances crushing efficiency and product quality. Technical Highlights: Feed size: ≤320 mm Discharge size: 3–50 mm Capacity: 45–1200 t/h Motor power: 90–630 kW Giodpfjtxhybex Anxjt Advantages: Automatic cavity cleaning, precise control, high crushing ratio, and superior particle shape. Applications: Ideal for large-scale mining, aggregate production, and high-demand crushing lines requiring consistent output and minimal downtime. Comparative Overview Both crushers operate on the same compression principle but differ in control and automation. The spring cone crusher offers simplicity and cost-effectiveness, making it suitable for stable working conditions. The hydraulic cone crusher provides advanced control, faster adjustment, and higher efficiency, ideal for modern, large-capacity plants.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 400 kW (543.85 HP), Ore Beneficiation Plant for Nickel, Copper, Zinc, Graphite, Gold, Silver, Chrome, Quartz/Silica In today’s competitive mining and metallurgical industry, maximizing ore value is critical. Our state-of-the-art Ore Beneficiation Plant offers a complete solution designed to increase the content and quality of raw ore, transforming it into a marketable product ready for further processing or direct sale. Engineered for a wide range of minerals—including nickel, copper, zinc, graphite, gold, silver, chrome, and quartz/silica—our ore beneficiation plant delivers exceptional performance, efficiency, and reliability. Introduction Mining operations around the world face the challenge of processing ores that are often low in grade and require extensive refinement to be economically viable. Beneficiation—the process of increasing the concentration of valuable minerals—plays a vital role in reducing operational costs, enhancing recovery, and ultimately, ensuring profitability. Our ore beneficiation plant, also known as an ore processing plant or mine dressing plant, integrates advanced technology and robust engineering to deliver an efficient crushing, grinding, classifying, and separation process. Designed to handle a wide variety of ores, our plant is the ideal solution for mining companies looking to optimize their extraction and processing operations. Whether you’re processing nickel, copper, zinc, graphite, gold, silver, chrome, or quartz/silica, our plant provides the versatility and performance needed to meet today’s rigorous industrial standards. Gjdpfxjq Nw Uqj Anxsit ## What Is an Ore Beneficiation Plant? An ore beneficiation plant is a facility where raw ore is processed to improve its quality and increase the concentration of valuable minerals. The plant typically includes several stages of processing: 1. Crushing: The raw ore is reduced in size to allow for more efficient downstream processing. 2. Grinding: Further size reduction to liberate the valuable minerals from the waste material. 3. Classifying: Separation of the ore into different size fractions using screening and hydrocyclones. 4. Separation: Employing various physical processes such as magnetic separation, flotation, or gravity separation to concentrate the valuable minerals. 5. Dewatering: Removal of excess water to prepare the concentrate for further processing or shipping. This integrated process not only boosts the metal content but also minimizes waste, thereby improving overall cost efficiency and environmental sustainability.