Used Promac Biplane 1200 for sale (5,138)

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, pressing force: 60 t, bale weight: 550 kg, Equipment: documentation/manual, Used HSM V-Press 1160 Plus vertical press from 2015. The device is regularly serviced by an authorized service center. The press is fully functional and in very good technical and technical condition. Crushing force: 594 kN Voltage / required: 400 V / 50 Hz Width x height of the loading opening: 1195 x 650 mm Bale length x width x height: 1200 x 1100 x 1200 mm Width x height x height of the machine: 1780 x 1568 x 2985 mm Machine weight: 2403 kg Pressed material: foil, mixed paper, cardboard, cutting machine waste Freight costs depend on the weight, volume and above all on the distance, the following information is relevant for inquiries: Delivery address (postcode and name of the town), but further details require a telephone call, so we ask you to inquire about transport costs and other delivery modalities to contact us by phone. Our contact details can be found under the legal information of the seller. We sell and export worldwide, due to our very large storage capacity we can also deliver larger quantities flexibly and quickly. We issue intra-community invoices - excluding VAT. Opening hours Mon-Fri: 8 a.m.-4 p.m. sat .: closed Hsdpfxjz Aagaj Ab Isnt

Condition: used, Year of construction: 2009, faceplate diameter 1250 mm turning height 1250 mm Control 0i-TD Fanuc max. torque at faceplate 12500 Nm max. turning diameter 1600 mm max. workpiece weight 5000 kg table speed 2- 300 min/-1 x-axis 1475 mm z-axis 900 mm rapid traverse 10 m/min spindle cone ISO BT50 tool capacity 12 pos. total power requirement 75 kW weight of the machine ca. 32 t dimensions of the machine ca. 4,7 x 5,8 x 5,5 m CNC vertical lathe with 12 positions ATC. Spindle reception is BT 50. Hnodpfozhxi Rox Ab Ijt Control: Fanuc 0i-TD

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: M12902*19846, Year of construction: 2020, Currently, no forks are installed. However, the manufacturer could install forks and shorten the mast before the sale, if desired. This forklift is a returned leased unit. The original purchase price was €313,926.00. The technical data corresponds to the original invoice. The seller assumes no liability for this. The operating hours reflect the status as of April 2025. Additional hours have been added since then. TECHNICAL DETAILS Lifting height: 19,065 mm Load center: 1,220 mm Turning radius (outside): 6,000 mm Overall height: 10,490–19,710 mm Side shifters Side shift: ±600 mm Tilt compensation: ±6° hydraulic, mechanical height compensation 200 mm Hedpsyly Dxsfx Ab Isnt MACHINE DETAILS Dimensions & Weight Dimensions (W x H): 6,660 x 10,490 mm Total weight: 44,900 kg Engine Engine: Volvo TAD-881-VE Fuel type: Diesel Power: 185 kW / 1,175 Nm at 1,600 rpm Displacement: 7.7 liters / 6 cylinders / EU Stage 5 Transmission: ZF automatic 4WG-191-B Drive axle: Kessler D91 (track width: 4,600 mm) Electrical system: 24 V CAN-Bus system with 7" color display EQUIPMENT Box frame, bolted tanks, mudguards Operator protection roof (steel construction) External rearview mirrors (mounted high) Variable displacement pumps with return filter (10 µm) Joystick control with power steering Accumulator for lifting mast (60 bar / 2 liters) LED lighting (position, turn, work, and tail lights) Cabin (OPTIMA): L x W x H = 1,605 x 1,480 x 1,620 mm 3 windshield wipers, ventilation, opening side windows Electrical 24V connection (10A), interior rearview mirror, coat hook Duplex mast 6/7: Lifting height 2,310–19,070 mm, overall height 10,490–19,710 mm Spreader: ELME 584LD, side double spreader 20–40", with hooks and side shifters Central lubrication system "Lincoln" Rear-view camera (MOTEC, color display 6.7", heated lens) Fire extinguisher (6 kg, mounted on the outside left) Tires: Type: 14.00 x 24" / PR24, manufacturer: Michelin XZM Operating manual, driver's manual, parts catalog

Condition: new, Year of construction: 2024, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, overall weight: 720 kg, warranty duration: 12 months, welding current (min.): 800 A, input frequency: 50 Hz, Equipment: CE marking, USB port, documentation/manual, type plate available, The SITEC ITR1200 CN is a tilting rotary table with CNC control, designed for circumferential welding of large components. Thanks to its robust structure, brushless drive, and fully programmable management, it guarantees high precision, reliability, and repeatability of the processing cycles. Key features: Table diameter: 1,000 mm Maximum load in the horizontal plane: 1,200 kg Hedpjzlih Sofx Ab Ijnt Rotation speed: 0.04 – 2 revolutions/min Bending moment: 300 kgm Torque: 150 kgm Hydraulic tilting: 0° – 100° Welding processes: TIG / MIG Brushless motor with permanent magnets and digital control CNC with integrated PLC Touch screen display for programming and cycle management Storage and retrieval of welding programs Setting of overlap, number of tack welding points, and processing parameters Rotating mass 800 A High-rigidity, electro-welded steel structure Advantages: High precision and repeatability of welding Complete control of processing cycles Reduced setup times High-efficiency and low-maintenance brushless drive Ideal for industrial production and heavy-duty machining Applications: Particularly suitable for welding tanks, vessels, flanges, dished ends, large-diameter pipes, and components for the energy, plant engineering, shipbuilding, and metalworking industries. Customization: The machine can be configured with numerous optional features and accessories, including pneumatic torch holders, dedicated supports, and further customizations to adapt to specific production requirements. For more information, photographs, demonstration videos, and available configurations, please do not hesitate to contact us.

Condition: like new (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 2000027, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, nominal power (apparent): 30 kVA, torque: 150 Nm, controller manufacturer: fanuc, controller model: FANUC 31İ-MODEL B, workpiece length (max.): 1,200 mm, workpiece width (max.): 600 mm, table width: 600 mm, table length: 1,200 mm, rotational speed (max.): 15,000 rpm, spindle speed (max.): 15,000 rpm, Equipment: chip conveyor, documentation/manual, MATSUURA VX-1000 1200x600mm 15,000 RPM. Our machine was purchased specifically in 2014 for a precision job. It has never been used for rough machining. It has low operating hours. If you have any questions or need further information, please send us a message or call us. Hjdpfxezgv Izs Ab Ijnt

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 1,250 mm, controller manufacturer: SIEMENS, controller model: Sinumerik, overall weight: 9,700 kg, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis CHIRON MILL FX 1250 was manufactured in 2015. It has a mass of 9700 kg and operates at a voltage of 400 V with a full load current of 63 A. If you are looking to get high-quality machining capabilities, consider the CHIRON MILL FX 1250 vertical machining centre we have for sale. Contact us for further details. Hnsdpjzzdw Hefx Ab Iet - Voltage / Phases / Frequency (U): 400 V / 3 Ph / 50 Hz- Full Load Current (I): 63 A- Short-Circuit Current Rating (SCCR): 10 kA- Power (P): 38 kVA- Operating Pressure (p): 6 bar

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 1183016, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, workpiece length (max.): 1,270 mm, workpiece width (max.): 635 mm, workpiece height (max.): 508 mm, workpiece weight (max.): 794 kg, table width: 475 mm, table length: 1,321 mm, overall weight: 6,033 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 2,240 W, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, MACHINE Vertical machining center, HAAS, VF-4SS STANDARD EQUIPMENT: CNC control, 4 axes, HAAS type (NGC version), compatible with Fanuc, ISO programming, G-codes ISO40 spindle taper, CT type 1 GB memory capacity 15" LCD monitor, touchscreen and USB port Ethernet + WiFi network card Early voltage drop detection module (prevents the effects of voltage drops) HaasConnect – remote monitoring of machine operating status via the Internet, VNC and DPRNT protocol Program restart – ability to start the program from any block RunStopJogContinue – ability to move the tool without interrupting the program SafeRun – active anti-collision system (minimizing the effects of collisions) Electronic handwheel Spindle cooling system Temperature compensation for ball screws Protective cabin with sliding front doors and side windows Side magazine with 30 positions Hjdpfx Abszt Nlmj Iont Memory lock Spindle taper air blow system Thread cutting without a compensating chuck (rigid) Installation for connecting compressed air Cooling system with a pull-out coolant tank, filled with coolant Automatic central lubrication system Machine tool lighting "Guns" for air and coolant (mounted on the front of the machine) 4AXD – Machine preparation / connections, wiring / For connecting the table, without a table AUGER – Screw chip conveyor HSM – Faster processor with look-ahead function, accelerating the machining of shapes with 3-axis interpolation ACF – Additional 25 μm filtration system, essential for machining cast iron, aluminum, wood, and phenol-based and other dusty materials TSC* – Through-spindle cooling, pump with increased power /21 bar, 22 l/min/ (ACF option required) WIPS-R – Renishaw probe set, wireless, for measuring tool radius and length, for measuring and setting using (graphic) measuring cycles. SO – Spindle orientation MACRO – Parametric programming COORD – Scaling and rotation of the coordinate system VPS (Visual Programming System) – graphic machining cycles, expansion and creation of custom cycles

Year of construction: 2021, operating hours: 200 h, condition: like new (used), Amos Belt Press OPUS 1200 including fruit washer Amos ELE 280 N. The entire system is made of stainless steel, including the electrical control cabinet. Few operating hours. The unit is being sold due to the acquisition of a larger press system. Hjdpfjwimqzsx Ab Ijnt

Condition: good (used), Year of construction: 2015, operating hours: 24,272 h, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 720 mm, torque: 406 Nm, controller manufacturer: Heidenhain, overall weight: 11,800 kg, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, MAS KOVOSVIT MCV 1270 Power Year of manufacture: 2015 Heidenhain iTNC 530 control system Hnjdpozydarsfx Ab Ijt X-axis: 1270 mm, Y-axis: 610 mm, Z-axis: 720 mm Tool changer with 24 positions, SK50 Spindle speed up to 8000 rpm Spindle torque 406 Nm / 100% 623 Nm / 40% Chip conveyor IKZ 20 BAR (internal cooling system) Weight: 11800 kg

Year of construction: 2025, condition: new, functionality: fully functional, Maximum stack + pallet weight: 1,200 kg Maximum paper size: 1,200 x 900 mm Minimum paper size: 560 x 360 mm Minimum opening width: 840 mm Maximum opening width: 1,600 mm Power: 9.5 kW Power supply: 380V three-phase 50 Hz Weight: 3,400 kg Dimensions: 2,700 x 2,200 x 2,200 mm Hsdpfx Asyztm Teb Ient Noise level: < 80 dB

Condition: used, Year of construction: 1999, total length: 1,000 mm, total width: 2,040 mm, total height: 1,710 mm, Colour: Grey Empty weight: 900 kg - Year: 1999 - Documentation available: No - CE certificate present: No - Serial number: 126-02049 - Main motor power [kW]: 7.8 - Spindle diameter [mm]: 40 - Table length [mm]: 1990 - Max. tool diameter milling head [mm]: 180 - Feeding device present: Yes Hnodpfx Abjwnigcj Iet - Brand: Holz-her - Number of wheels [pcs]: 3 - Number of speeds: 2 - Voltage [V]: 380 - Current consumption [A]: 12 - Power [kW]: 6.2 - Transport dimensions: 1000mm x 2040mm x 1710mm (l x w x h) - Transport weight [kg]: 900kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2016, Used 2016 SPINNER U-1520 Machining Centre Supplied with Siemens SINUMERIK 840 control, 12,000 RPM spindle, 32-station tool changer, 80 bar high-pressure coolant, air through spindle, Renishaw probe, touch probe, and additional Ø650 mm rotary table. ----- SPECIFICATION: TRAVELS: - X Axis: 1,500 mm - Y Axis: 500 mm - Z Axis: 600 mm - 4 Continuous Axes + 1 Positioned Axis TABLE: Hedpszx Ehnjfx Ab Ient - Rotary Table Diameter: 650 mm - Fixed table: 920x540mm SPINDLE: - Max Speed: 12,000 rpm - Taper: SK40 - Air Through Spindle TOOL CHANGER: - Capacity: 32 Tools COOLANT EQUIPMENT: - High Pressure Coolant: 80 bar GENERAL: - Control: Siemens SINUMERIK - Renishaw Probe - Touch Probe - Year of Construction: 2016 Control: Siemens 840D Spec: Travel X 1500 Y500 Z600 | Spindle Speed 12000RPM | SK40 Accessories: 5 axis Table, Fixed Table, 32 Tool Changer

Condition: used, Year of construction: 2012, travel -x axis 1.630 mm travel -y axis 762 mm travel -z axis 650 mm control FANUC - 0I-MD Spindle speed 12.000 min -1 weight of the machine ca. 13 t Milling machining centers - vertical | DOOSAN - DNM 750 equipped with 30-way tool changer, ITC (20 bar) and chip conveyor. Hnodpozw N E Isfx Ab Iot The machine only has 13.686 spindle hours. The machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DNM750 | DNM-750

Condition: used, Year of construction: 2000, machine/vehicle number: 990101, total length: 6,400 mm, total width: 2,200 mm, total height: 2,300 mm, overall weight: 18,500 kg, Heavy Duty Lathe Seiger SLZ 1200 x 3000 with Siemens Sinumerik 810D Cycle Control (Teach-In) The heavy duty lathe Seiger SLZ 1200 x 3000 is equipped with a Siemens Sinumerik 810D cycle control (Teach-In). The machine was most recently used as a faceplate and frontal lathe and therefore operated without a tailstock and without steady rests. However, the machine can still be structurally equipped with appropriate steady rests or a tailstock and used for classic center work. Configuration with AC main drive, large faceplate, hydraulic unit, separate control cabinet, and 2 chip conveyors. Working Area Distance between centers: 3,000 mm Swing diameter over bed: 1,200 mm Swing diameter over cross slide: 850 mm Cross slide travel: 620 mm Bed width: 750 mm Spindle Spindle nose: DIN 55027 size 11 Spindle diameter front bearing: 190 mm Spindle bore: 104 mm Speed range: 5 – 900 min⁻¹ Max. torque: 6,000 Nm Main Drive Drive power: 37 / 52 kW (100% / 60% duty cycle) Feed X-axis feed force: 24,000 N Z-axis feed force: 16,000 N Rapid traverse X: 7 m/min Rapid traverse Z: 4 m/min Tool Holder Turning tool cross-section: 40 × 40 mm Electrical Data Supply voltage: 400 V Frequency: 50 Hz Hodpfx Abjzdd E Rs Ient Max. current consumption: 200 A Workpiece Weights (Manufacturer specifications for standard configuration) Between centers without steady rest: 5,000 kg Between centers with 1 steady rest: 6,000 kg Between centers with 2 steady rests: 7,000 kg Flying in faceplate: 1,800 kg Chip Conveyor 2 x AME Chip Conveyors Manufacturer: AME GmbH, Emsdetten Type: S8 300 Tlg. 63 Year of manufacture: 05/2016 Not Included: Tailstock Steady rests Note The machine was most recently used as a faceplate or frontal lathe. Therefore, neither a tailstock nor steady rests are currently available. The machine is particularly suitable for machining large disc, ring, and flange workpieces. A later retrofit for use between centers is fundamentally possible. Serial number: 990101 Tip width: 3000 - mm Turning diameter max.: 850 mm Control: • Siemens Sinumerik 810D Weight approx.: 18,500 kg Dimensions (LxWxH) approx.: 6400 x 2200 x 2300 mm Year of construction: 2,000 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: No

Condition: used, This listing is for a Quattroflow QF 1200-S Single-use Pump diaphragm pump. The unit is in full working condition and is ready for immediate release. The Quattroflow QF 1200-S is a sophisticated quaternary diaphragm pump specifically engineered for sterile fluid transfer in the pharmaceutical manufacturing and biotech sectors. Its compact design and advanced features position it as a top choice for applications requiring precision and contamination control. Here’s a closer look at its characteristics, advantages, and applications: Key Characteristics: Flow Rate: Capable of handling flow rates of up to 1200 litres per hour, making it versatile for various processing needs. Eccentric Shaft Design: Offers 3° and 5° angles for adjustable flow rates, tailoring the pump’s performance to specific applications. Pump Chamber Material: Available in both stainless steel for multi-use and polypropylene for single-use, catering to different operational requirements and preferences. Hsdpfxsxxy S Us Ab Isnt Control System: Features an integrated pump controller (Q-Control) that allows for automated control and monitoring, enhancing operational efficiency and precision. Interfacing Options: Compatible with various flow and pressure sensors, ensuring seamless integration into existing systems for real-time monitoring. Model Variants: Includes several models such as QF30, QF150, QF1200, QF2500, and QF44, providing options to meet diverse process demands. Advantages: Low-Shear, Low-Slip, Low-Pulsation Performance: This design ensures the gentle transfer of critical biological fluids, preserving their integrity and functionality. Single-Use Positive Displacement Technology: Reduces maintenance costs significantly and enhances purification yields by minimizing the need for cleaning and validation. Total Product Containment: The unique seal-less design eliminates contamination risks and particle generation, ensuring the purity of the fluids being transferred. CIP/SIP-Capable and Autoclavable: Supports clean-in-place and sterilize-in-place protocols, making it suitable for sterile fluid transfer in highly regulated environments. Easy Installation and Replacement: The single-use pump chambers are quick to install and replace, streamlining workflows and minimizing downtime.

Condition: excellent (used), Year of construction: 1999, operating hours: 40,000 h, functionality: fully functional, color channels: 5, Good working condition, belt width 1200mm Hsdpshtncujfx Ab Isnt

Condition: used, Year of construction: 1996, machine/vehicle number: 7037, equipped with an ABB IRB6400F removal robot, year of manufacture: 1997, serial number: 1318, inventory number: 073005700, WOLLIN spray unit, casting automation, control system, touch panel, cooling tank, machine platform, belt conveyor, 1 ABB industrial robot as a spare parts dispenser. Hodpfx Ajzhax Teb Ijnt

Condition: used, functionality: unexamined, Danobat Universal Grinder model 1200 RP with automatic diamond dressing device, capable of working in automatic cycle, maximum grinding diameter 270mm, maximum wheel diameter 400mm, maximum wheel width 60mm, head power 12 HP. Hnsdpfxjw Iv Hue Ab Ijt

Condition: used, Year of construction: 2018, A manual shaft measuring device for measuring shafts and rotationally symmetrical workpieces and for determining various form, position, length and diameter parameters is offered. Measuring length: 1200mm, max. workpiece diameter: 200mm, max. workpiece weight: 50kg, measuring method: manual, software: PREMION measuring software, operating system: Windows 11. Equipment: PC with monitors, keyboard and mouse, manual length and diameter module, centering tips and additional measuring accessories, PC replaced and equipped with Windows 11. Weight: 250kg. An on-site inspection is possible. Hnedpfxjzvgibo Ab Iot

Condition: used, mileage: 3,12,656 km, power: 92 kW (125.09 HP), first registration: 07/1992, fuel type: diesel, overall weight: 7,500 kg, color: orange, gearing type: mechanical, number of seats: 2, Year of construction: 1992, Equipment: all wheel drive, Unimog 427/10 Winter service VIN: W171477 Chassis / Attachments * Leaf suspension * Wheelbase 2640 mm * Tires: 14.5R20 * Residual tire tread: V.~90/50% H.~80/50% * 1 diesel tank * Trailer coupling * PTO V+H * Hydraulic connections V+H * Device for snow blade * Raised exhaust Superstructure * Küpper-Weisser HD built in 1992 1.7m3 road salt body * Parking feet included (see photo) * Three-way tipper Cab / Driver's cab * 2 seater * Roof hatch * Rotating beacons Engine / Gearbox * 5,958 cm³ * Manual gearbox Weights * Total weight 7,500 kg * Payload 3,000 kg * Unladen weight 4,500 kg Miscellaneous * German vehicle * 1 previous owner New general inspections / safety tests or weight reductions/additions are possible on request. We are happy to assist you in obtaining export/transfer license plates, and it is also possible to transfer your purchased vehicles within Germany. Please contact us at ---- We speak the following languages: German, English and Russian!---- No liability for printing & typing errors, changes, prior sale and errors excepted!----Who are we ? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. Thanks to our many years of experience in the reconditioning and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. A large number of vehicles can be found on 11,000 square meters. Our corporate philosophy is characterized by fairness and reliability. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person to assist them with the purchase or sale of vehicles. See for yourself! Our service for you: Loading vehicles We are happy to help you load your purchased vehicles. Organizing special transports We are happy to help you organize special transports. Daily numbers / export license plates We are happy to help you obtain export license plates/short-term license plates. Hnsdswyy N Sopfx Ab Ist Completing customs formalities We are happy to help you with customs formalities.

Condition: used, Year of construction: 2008, Manufacturer: Fritz Müller Machine type: Hydraulic drawing press Type: BZE 1200 – 35.1.1 Year of manufacture: 1972 General overhaul: 2008 Total drawing force, press ram: 1,000 – 12,000 kN Drawing force: 7,000 kN Holding force per cylinder: 200 – 1,250 kN Ram surface area: 3,500 × 2,200 mm Max. ram stroke: 1,330 mm Max. drawing depth: 430 mm Distance, table – holding cylinder, top dead center: 2,700 mm Distance, table – holding cylinder, bottom dead center: 1,420 mm Hsdey Ndz Ropfx Ab Ient Distance, table – ram, top dead center: 2,500 mm Distance, table – ram, bottom dead center: 1,200 / 1,600 mm Hydraulic table cushion, one-piece: Displacement force: 800 – 2,500 kN Stroke: 0 – 300 mm Cushion surface area: 2,700 × 1,200 mm Table clamping surface: 3,500 × 2,200 mm Clear width between guides: 3,550 mm Max. tool weight: 32 t Max. plate width: 2,200 mm Max. plate length: 1,600 mm Sheet metal thickness: 0.5 – 2.5 mm Feeding height above table: 650 – 900 mm Max. single part weight: 40 kg Max. stack height: 450 mm Max. weight per plate stack: 4.5 t Single or double plate feeding possible Electronic double sheet control available Rapid descent speed: max. 500 mm/s, unregulated Working speed: 30 – 115 mm/s Return speed: 30 – 600 mm/s Documentation: No digital data available Drawings: Partially available as ink drawings; on-site inspection possible Packing lists: No packing lists with individual weights available

Condition: used, This listing is for a Quattroflow QF 1200-S Single-use Pump diaphragm pump. The unit is in full working condition and is ready for immediate release. The Quattroflow QF 1200-S is a sophisticated quaternary diaphragm pump specifically engineered for sterile fluid transfer in the pharmaceutical manufacturing and biotech sectors. Its compact design and advanced features position it as a top choice for applications requiring precision and contamination control. Here’s a closer look at its characteristics, advantages, and applications: Key Characteristics: Flow Rate: Capable of handling flow rates of up to 1200 litres per hour, making it versatile for various processing needs. Eccentric Shaft Design: Offers 3° and 5° angles for adjustable flow rates, tailoring the pump’s performance to specific applications. Pump Chamber Material: Available in both stainless steel for multi-use and polypropylene for single-use, catering to different operational requirements and preferences. Control System: Features an integrated pump controller (Q-Control) that allows for automated control and monitoring, enhancing operational efficiency and precision. Interfacing Options: Compatible with various flow and pressure sensors, ensuring seamless integration into existing systems for real-time monitoring. Model Variants: Includes several models such as QF30, QF150, QF1200, QF2500, and QF44, providing options to meet diverse process demands. Advantages: Hnedpfx Absxxz I Ro Iet Low-Shear, Low-Slip, Low-Pulsation Performance: This design ensures the gentle transfer of critical biological fluids, preserving their integrity and functionality. Single-Use Positive Displacement Technology: Reduces maintenance costs significantly and enhances purification yields by minimizing the need for cleaning and validation. Total Product Containment: The unique seal-less design eliminates contamination risks and particle generation, ensuring the purity of the fluids being transferred. CIP/SIP-Capable and Autoclavable: Supports clean-in-place and sterilize-in-place protocols, making it suitable for sterile fluid transfer in highly regulated environments. Easy Installation and Replacement: The single-use pump chambers are quick to install and replace, streamlining workflows and minimizing downtime.

Condition: used, Year of construction: 1998, functionality: fully functional, DECKEL MAHO - DMU 125 T Offer Details Stock Number 1039-8700 Machine Type Machining Center - Vertical Manufacturer DECKEL MAHO Type DMU 125 T Year of Manufacture 1998 Control TNC 426 Heidenhain Location D-59302 Oelde Country of Origin Germany Delivery Time Upon Agreement Incoterms EXW (Ex Works) Additional Information CNC - Vertical Machining Center DECKEL MAHO - DMU 125 T - Coolant Through Spindle (CTS) Technical Details X-axis travel 1,250 mm Hodpfx Aozfzhdeb Ijnt Y-axis travel 880 mm Z-axis travel 800 mm Control TNC 426 Heidenhain Main Spindle: Spindle Speed Range - Main Spindle max. 12,000 min/-1 Drive Power - Main Spindle 15 / 10 kW Max. Torque 500 Nm Tool Interface SK 40 Work Table: Table Surface Area 1,500 x 1,050 mm Max. Table Load 2,500 kg Number of T-slots 10 T-slot Width 18 H7 mm T-slot Spacing 100 mm Tool Changer: Number of Tool Positions 30 Max. Tool Diameter 80 mm Max. Tool Diameter with Free Neighboring Position 160 mm Max. Tool Length 315 mm Max. Tool Weight 8 kg Max. Total Weight 100 kg Feeds: Rapid Traverse (X / Y / Z) 15 m/min Feed Rate 10,000 mm/min Total Power Consumption 29 kW Machine Weight approx. 16.0 t Space Requirement approx. 7.0 x 5.0 x 3.3 m Accessories Documentation Chip Conveyor Coolant System High-Pressure Cooling Internal Coolant Supply Tool Changer Measuring Probe Heidenhain Electric Handwheel

Condition: used, Dinnissen Dima 1200 bag emptying machine bag cutting machine stainless steel Machine has been overhauled. Equipped with new running wheels, bearings, clamps, etc. Capacity: 1200 bags/hour Completely made of stainless steel Drum motor power: 2x 1.5kW 124rpm Cutting rotor motor power: 2x 5.5kW 211rpm Hnodpfxox D U Nlj Ab Ist Cutting chamber with double rotor is mounted on top of the infeed hopper of the drum sieve See our other advertisements VMA Wekerom

Year of construction: 2012, operating hours: 5,000 h, condition: used, functionality: fully functional, The Italforni TSC Tunnel Electric Stone Deck Conveyor Oven (31") is a premium, high-output commercial pizza oven that bridges the gap between traditional stone baking and automated conveyor convenience. It features a unique refractory ceramic stone conveyor belt that allows operators to cook genuine Italian-style stone-baked pizzas, flatbreads, and focaccia directly on the stone surface at high volumes. Key Specifications: According to technical data from Italforni and official suppliers like External Dimensions: 1100 mm (H) x 2520 mm (L) x 1200 mm (W) Internal Chamber Dimensions: 2500mm (L) x 870mm (W) x 110mm (H) Belt Width: 31 inches / 790 mm Weight: 420 kg Power Requirements: 34 kW, 415 V three-phase (requires a 63-amp feed) Hourly Production Output The 31-inch variable speed belt handles large quantities efficiently, achieving a standard bake time of roughly 3 minutes per pizza: Hsdpfx Aboz Ad S Hj Ijnt Core Features: Static Heating Elements: Uses individually controlled top and bottom static Incoloy heating elements. This design provides up to 30% more cooking capacity compared to standard convection models. Precise Digital Controls: Features touchscreen menu programming with an accuracy of +/-1°C. Maximum cooking temperatures reach up to 450°C to 500°C. Energy Efficiency: Includes a built-in standby mode that lowers energy consumption by up to 50% during off-peak hours. Simplified Maintenance: Built with premium stainless steel, a self-diagnostic service function, and removable crumb-collecting trays for easy cleanup.