Used Roller Discharge Table With Side Ejection for sale (42,536)

Condition: ready for operation (used), Year of construction: 1972, functionality: fully functional, machine/vehicle number: 1217, input voltage: 380 V, power: 34.8 kW (47.31 HP), input frequency: 50 Hz, We offer this ready for use Gubisch BS2000 planer and moulder, year of construction 1972. Serial number: 1217 Voltage: 380 V Dksdpfx Apsz Hac Hs Deu Frequency: 50 Hz Power consumption: 34.8 kW Working width: 200 mm Planing height: 120 mm Number of spindles: 6 Bottom spindles: 2 Right spindles: 2 Left spindles: 1 Top spindles: 1 Spindle configuration: b-r-l-r-t-b Spindle rotation speed max: 6.000 rpm Spindle diameter: 40 mm Feedrate max: 30 m/min Continuously variable feed: Yes Feed motor: 2,2 kW Main motor power: 5,5 kW Chip rabbet cutter: No Seperate motor per spindle: Yes Motoric adjustment: Planing height Infeed table length: 3.500 mm Lubrication pump: manually First infeed roller controlled: Yes Type of feed roller drive: Cardanic Total connection: 23 kW If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2022, functionality: fully functional, cooling capacity: 118.1 kW (160.57 HP), type of input current: three-phase, type of cooling: air, overall weight: 850 kg, input voltage: 400 V, total width: 1,200 mm, total length: 2,830 mm, total height: 1,980 mm, warranty duration: 6 months, AIRCOOLED CHILLER CLIMAVENETA NX2-G06 0122 118.1 KW Cooling capacity: 118.1 kW / 33.58 tons (12/7 — 35°C) Year of manufacture: 2022 Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum Compressors: 1 pcs. Bitzer GSD60235VLB4-2 (scroll) + 1 pcs. Bitzer GSD80295VLB4-2 (scroll) Type of refrigerant: R454b Number of fans: 2 pcs. Dimensions: 2.83x1.2x1.98 m Weight: 850 kg Working hours: 2219/2220 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT Dksdpfsz Hkiqjx Ap Dsu The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: reconditioned (used), Year of construction: 2015, Number of spindles 9 St. Working width 240 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 7,5 kW Working speed 6-36 m/min weight of the machine ca. 6500 kg Control CONTROL 100 PC PLUS SCM Topset XL, Year of Manufacture 2015; currently undergoing partial recondtionning in stock ----- Summary: - 9 spindles (including 4 x HSK 85 S) - Electronic horizontal and vertical positioning - 8,300 rpm - SCM "Set-up" - SCM "T-Set" - Includes workpiece infeed magazine Working dimensions: - Maximum working width: 240 mm - Minimum working width: 25 mm (reducible to 15 mm via installed special kit) - Maximum working height: 120 mm - Minimum working height: 10 mm (reducible to 6 mm via installed special kit) Special working cross-section equipment: Equipped with a special kit for extremely small minimum cutting dimensions of 15 x 6 mm. Infeed table and table surfaces: - Infeed table length: 2,500 mm (2.5 meters) - Surface finish: Wear-resistant, special chrome-plated finish for optimal sliding properties and minimal wear. Spindle specifications: 1. Spindle: 1st horizontal spindle (BOTTOM): - Motor power: 11 kW - Speed: 6,000 rpm - Shaft: High-precision spindle, 40 mm diameter 2. Spindle: 1st vertical spindle RIGHT: - Motor power: 11 kW - Speed: 8,300 rpm - Tool mounting: Milling spindle with HSK 85S quick-change mount - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning 3. Spindle: 1st vertical spindle LEFT: - Motor power: 11 kW - Speed: 8,300 rpm - Tool mounting: Milling spindle with HSK 85S quick-change mount - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning - Tool diameter adjustment "SET UP": Electronic regulation of tool diameter, tool diameter positioning 4. Spindle: 2nd vertical spindle RIGHT: - Motor power: 11 kW - Speed: 8,300 rpm - Tool mounting: Milling spindle with HSK 85S quick-change mount - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning 5. Spindle: 2nd vertical spindle LEFT: - Motor power: 11 kW - Speed: 8,300 rpm - Tool mounting: Milling spindle with HSK 85S quick-change mount - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning - Tool diameter adjustment "SET UP": Electronic regulation of tool diameter, Tool diameter positioning 6. Spindle: 1st horizontal spindle (TOP): - Motor power: 11 kW - Speed: 8,300 rpm - Shaft: High-precision spindle, 40 mm diameter (working length 250 mm) - Tool clamping: "T-SET" quick-clamping system for tools - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning - "SET UP" tool diameter adjustment: Electronic tool diameter regulation, tool diameter positioning 7. Spindle: 2nd horizontal spindle (BOTTOM): - Motor power: 11 kW - Speed: 8,300 rpm - Shaft: High-precision spindle, 40 mm diameter (working length 250 mm) - Tool clamping: "T-SET" quick-clamping system for tools - Vertical positioning: Electronic vertical positioning Dodpfxszl Hbio Ap Deku - Horizontal positioning: Electronic horizontal positioning 8. Spindle: 2nd horizontal spindle (TOP): - Motor power: 11 kW - Speed: 8,300 rpm - Shaft: High-precision spind...

Condition: good (used), Year of construction: 1985, Cold circular saw, metal circular saw, miter saw, circular saw, sawing system, metal saw -Manufacturer: MEP, Cold circular saw, metal circular saw type TRL 300, swivels on both sides -Engine: Type C 112 M -Power: 2.2 / 3.0 kW -Speed: 720 / 1450 rpm -Saw blade: Ø 300 mm Djdoz Hwc Rspfx Ap Dsku -Cutting area at 90 degrees flat: 110 x 70 mm -Cutting range at 45 degrees: 100 mm -Dimensions: 1100/720/H1490 mm -Weight: 227 kg

Condition: used, Year of construction: 2016, Used four-sided planer WEINIG Powermat 600 Compact for sale. Dkjdpoz Hyvyjfx Ap Deu

Condition: refurbished (used), Seewer Rondo dough sheeter, table model with new belts and maintained. Dsdpfxjx D U Egj Ap Deku

Condition: excellent (used), Year of construction: 2005, I sell the combined tunnel for surface finishing Superfici Elmag Combiline. Configuration: 1-head roller coater Cleaning unit with dust exhaust system 2-head UV-drying tunnel Cleaning unit with dust exhaust system Model: Combiline. Working width: 1500mm Year 2005. Working hours: 4600 mthrs. Total length: 5,30m Total width: 2,40m Weight: 4000kg Available immediately. Fully working. Dkedpsiuc R Hsfx Ap Dou

Condition: ready for operation (used), Year of construction: 2011, Number of spindles 6 St. Working width 230 mm Working height 150 mm Length of the planing table 2000 mm Feed motor 5,5 kW Feed speed 7-36 m/min. Kuper SWT 23 XL-6 Four-Sided Planer ----- Machine fully functional tested! ... Working width min/max: 18 - 230 mm Working height min/max: 8 - 150 mm Spindle configuration: 1st Spindle - bottom ----- Power: 5.5 kW Speed: 6,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 240 mm Pulley diameter: 160 mm Adjustment: axial and radial, manual 2nd Spindle - right ----- Power: 5.5 kW Speed: 6,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 160 mm Pulley diameter: min. 110 mm - max. 200 mm Adjustment: axial and radial, manual, via mechanical digital display Adjustment: vertical 35 mm below Table 3rd Spindle - Left ----- Power: 7.5 kW Speed: 6,200 rpm, including brake Spindle diameter: 40 mm Spindle length: 160 mm Cutting circle diameter (125 mm): min. 110 mm - max. 200 mm Adjustment: axial and radial manual via mechanical digital display Adjustment: horizontal 18 mm to 230 mm at 125 mm diameter, vertical 35 mm below table 4th Spindle - Top ----- Power: 7.5 kW Speed: 6,200 rpm, including brake Spindle diameter: 40 mm Spindle length: 240 mm Cutting circle diameter (125 mm): min. 120 mm - max. 200 mm Adjustment: axial manual and radial electric via mechanical digital display Adjustment: vertical 8 mm to 150 mm at 125 mm diameter, axial 26 mm 5. Spindle - top ----- Power: 7.5 kW Speed: 7,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 240 mm Djdpfxeyyqnlj Ap Djku Cutting circle diameter 125 mm: min. 120 mm - max. 200 mm Adjustment: axial manual and radial electric according to mechanical digital display Adjustment: vertical 8 mm to 150 mm at 125 mm diameter, axial 26 mm 6. Spindle - bottom ----- Power: 7.5 kW Speed: 7,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 240 mm Cutting circle diameter 125 mm: min. 110 mm - max. 250 mm Adjustment: vertical manual according to mechanical digital display, axial manual Adjustment: Radial 8 to 150 mm with a 125 mm diameter Axially 35 mm Further features: ----- -Infinitely variable feed speed, 7-36 m/min, 5.5 kW motor -Electric height adjustment, 0.75 kW -Siemens touchscreen - Includes existing planer heads (Technical specifications provided by the manufacturer - no guarantee!)

Condition: excellent (used), functionality: fully functional, mileage: 4,892 km, gearing type: hydrostat, fuel type: diesel, color: traffic orange, overall weight: 3,900 kg, empty load weight: 3,520 kg, drive condition: 90 %, axle configuration: 2 axles, number of seats: 1, suspension: steel, Year of construction: 2004, operating hours: 4,892 h, Equipment: additional headlights, hydraulics, tilting carriage, Welcome to MGC.pl. We have been selling vehicles and machinery since 1995. We offer a remarkably robust HAMM DV 3.22H road roller from 2004. This is a compact machine with two smooth steel drums, designed for surface compaction. It is suitable for roadworks and the construction of parking lots, squares, and driveways. The roller comes from a well-established Scandinavian company that specializes in road repairs and all types of road-related work, which means that no expense was spared on maintenance, and its condition is excellent for its age. Of course, it is not a new machine, but it works well. We arrange transport of machinery throughout the European Union and can deliver the roller to your specified address. We also offer other road rollers. Please contact us if you are looking for a machine with different specifications. Dedpfsz H Ukfjx Ap Djku Technical data: Manufacturer: HAMM, Germany Model: DV 3.22H Year of manufacture: 2004 Type: tandem roller, double-drum Drum type: smooth, steel Engine: Hatz Diesel 2M41 Engine power: 24.3 kW / approximately 33 hp Drum width: 1100 mm Drum diameter: 780 mm Basic weight: 3520 kg Operating weight: 3900 kg Maximum weight: 4100 kg Overall length: approx. 3.0 m Overall width: approx. 1.2 m Overall height: approx. 2.3 m Operator station: open, with ROPS protective frame Machine condition: The roller is in full working order. The engine runs smoothly and does not emit smoke. No play was detected during inspection. The drums have a large amount of metal and do not show significant wear. The machine is available for viewing and inspection on-site. The stated price is net and applies to exports and businesses. A significant discount is possible for individual customers – Please contact us directly by phone to get your best price.

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 45 kg, total length: 600 mm, total width: 400 mm, total height: 690 mm, input voltage: 230 V, input frequency: 50 Hz, laser power: 20 W, laser wavelength: 1,064 nm, scan area length: 110 mm, scan area width: 110 mm, type of cooling: air, type of input current: AC, laser type: fiber laser, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Due to its small size, the unit is very practical and can be used anywhere. The device is very easy to operate without programming knowledge. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks and without extensive programming knowledge. Serial and item numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a handheld scanner is also possible. Dodpfey Emthex Ap Doku The standard equipment includes a laptop with Windows operating system and laser software. Optionally, the laser model LAS 22 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 30 Watt (Optional: 20 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x110mm - marking software EZCAD in German / English - Pilot laser (simple preview/contour) - Focus finder (simple focusing) - Max. Component height approx. 95 mm - Grid holes for fixtures - Clamping area 310x190mm - Electrically adjustable Z-axis - Electric door with pinch protection - optional: exhaust system (incl. activated carbon filter) - Welded steel plate construction - Connection 230V - Air cooled - Laptop with Windows operating system (German or English) - dimensions: LBH 600x 400x 690 mm - weight: approx. 45 Kg - low operating costs - marking of various materials

Condition: new, 1 set of brand new steel profile rollers, suitable for an AKYAPAK APK 50 profile bending machine. Djdpfx Apsz Eaque Doku Suitable for rectangular tubes 60 x 40 x 3 mm, flat. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: new, neu ca. 6-8 Wochen ab Auftrag 10265 € 197.09 € 4000 x 2000 mm 850 mm 8000 kg 2340 kg 200 mm Dkjdpfxeyq Sqzo Ap Dsu 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet withload capacity 2 ton/feet and levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 8 to - All-round 200 mm high side cheeks with diagonal perforation - 2-sided millimetre scaling - Substructure with stiffeners OPTION (PRICE ON REQUEST): Diagonal holes

Condition: used, gebraucht 6019 390 € 1 Dksdjytx Huspfx Ap Dju 270 € 40 kg 1500 mm 600 mm 1000 kg 700 - 1.000 mm MINT CONDITION 3 table elements with 6 balls each

Condition: new, Year of construction: 2026, neu 2026 060182 prompt, Zwischenverkauf v Deutschland 3806 € 1 3000 mm 820 - 940 mm 300 kg/m 350 mm 65 x 3 mm 15 mm 2600 mm 250 mm with mm-scale and magnifier on stop carriage rolls and table with manual measuring system and a rigid flat steel guide Dkodpfjyw Tkqex Ap Deu stop carriage 6-fold ball bearing mounted, manually slideable and fixable fold up material stop INCL. FOLLOWING OPTION: material depth stop arm sprung and adjustabel up to the mechanical zero (man. dischargeable by eccentric lever (SZ05) FURTHER LENGTHS AND ROLL WIDTHS ON REQUEST

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 3303.85 € 6 mm B 12 220 mm Dkedoy Hf Rhspfx Ap Dju 100 - 10000 U/min 0,54 kW M5 452 mm 700 mm 1130 mm 44 kg 60 mm 140 - 315 mm 300 x 250 mm 70 mm Drilling capacity / normal drilling Performance 6/8 (in E335/ST60) Drilling capacity / normal drilling performance Thread cutting system Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with Schuko plug 3 years warranty for single shift operation OPTIONS (PRICES ON REQUEST): Machine cabinet with door and drawer Drill package 2 (vice & keyless chuck)

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 2792.28 € 10 mm B 16 220 mm 250 - 3000 U/min 0,45 kW 320 mm 520 mm 820 mm 44 kg Dedpoy Hf Rzefx Ap Doku 60 mm 140 - 315 mm 300 x 250 mm 70 mm Drilling capacity / normal drilling Performance 10/12 (in E335/ST60) Robust, high quality and inclined rotation hood for easy speed reading LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Undervoltage release Drill protection with electr. Fuse Connection cable with Schuko plug (1.2 m) 3 years warranty for single shift operation Art. - No. 217.410 with intermediate table and table height adjustment via toothed rack OPTIONS: Machine cabinet with door and drawer Drill package 2 (vice & keyless chuck)

Condition: used, mileage: 1,08,000 km, power: 235 kW (319.51 HP), first registration: 05/2018, fuel type: diesel, overall weight: 18,000 kg, gearing type: mechanical, emission class: euro6, loading space length: 4,600 mm, loading space width: 2,450 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, Iveco Eurocargo 180-320 !!!! ONLY 108,000 km !!!!! Registration: 05/2018 Djdpfx Ajz Ivlyop Deku Manual transmission Air conditioning Tires approximately 80% tread German vehicle Tow hitch with hydraulic connections for low-bed trailers/tippers Meiller tipper Tipper body 4.6m x 2.45m, side walls 60 cm ---- Visit our website: German/English/Serbian/Croatian/Bosnian/Bulgarian... Goran German/English/.../... Roman We will be happy to assist you with financing or leasing. EU sales: net price upon presentation of company documents and VAT number. VAT deposit: 2000 € Our services for you: - Customs license plates - Export documents and EUR1 - Worldwide transport - Overnight accommodation - Transfer to Munich Airport or Passau train station

Condition: reconditioned (used), Year of construction: 1999, functionality: fully functional, One side tenoning machine .Face levelling saw , vertical milling cutter .Sliding table on slides .Machine wigo cast iron , stable .Heads set at an angle .Machine has a pneumatic clamping gate .Manual displacement . Dsdpfsvfv A Hex Ap Doku

Condition: ready for operation (used), Year of construction: 2009, Board thickness 60 mm Edge thickness 3 mm Dodpfeuftubjx Ap Dsku Feed advance 25 m/min Sound-proof cabin Yes Glue tank Yes ----- Weight 3300 kg Hours worked Hours under power State good At local norms ----- Status in production Description We are putting our IDM edgebander up for sale as a replacement following the expansion of our production workshops. Here are the technical specifications: Model P-RT4 (productivity) Machine dimensions: 8656 x 900mm 1600mm wide roller table Crawler feed speed: 12-25 m/min Minimum panel size (length x width): 220 x 60mm Panel thickness: 10 to 60 mm Edge thickness from 0.3 to 3 mm Top, bottom, front, rear shape copying, end trimming on independent motors Profiled and flat scraping unit Integrated router shaft for optional panel grooving Edge and panel cleaning system with brushes Safety devices on all covers + environment (machine complies with standards) Electronic and mechanical adjustment of all aggregates Automatic part detection and aggregate positioning Granular gluing system with glue tray Integrated edge-roller tray Panel and edge preheating lamps Electronic positioning of pressure rollers Weight: 3300 kg

Condition: used, Roller conveyors Length: 6.26 m Width: 0.8 m Roll width: 0.7 m Djdpjwmnniefx Ap Deku Height: 20 - 40cm 12PCS

Condition: used, Rip saw - Saw for lengthening boards. - Manufacturer: omega T55 300 - Year: 1996 Dkodpfx Ajtq Eblep Deu - Electric motor - Frequency counter

Condition: used, Year of construction: 1975, Panhans sliding table saw IDL000791 - manufacturer: Panhans - model: 685 Djdpfxsukgyij Ap Deku - year: 1975 - working condition

Condition: used, mileage: 4,09,000 km, power: 335 kW (455.47 HP), first registration: 08/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 02/2027, color: grey, gearing type: automatic, emission class: euro6, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, * Mercedes-Benz Arocs 2646 6x4 three-sided dump truck with Bordmatic Dkjdpfszwtd Iox Ap Deu * Euro 6c * Meiller body * Bordmatic * Differential lock * Short-haul cab * Auxiliary heater * Seat heating * Air horns * Trailer coupling * Hydraulic connections for trailer operation * Multimedia radio * Electronic Fuel Monitoring (EFM) * Permissible total weight: 26,000 kg, unladen weight: 12,233 kg * Next inspection: 02/27

Year of construction: 1990, condition: reconditioned (used), 4-sided planer unimat U23, 7 heads 4-sided Weinig 7-head planer, 7 universal arrangement: horizontal, lower vertical, right, left, vertical, right, vertical, upper horizontal, lower horizontal, and the last universal. The drive is realized by means of cardans. The drive is secured with Rotax clutches. Pressure of the element using pneumatics. Feed smoothly regulated by an inverter. Machine feed 0-42 m/min. 2.5 kW and 7.5 kW engines. Grinding table and a new one. Additionally, new wiring and new electrics. The machine has been completely renovated. Warranty . Dksdpfjpqxnxox Ap Dou

Condition: excellent (used), Panel Beam Saw - With rear lifting table Dkjdpjz Erw Hjfx Ap Dou Numerical Control POWER CONTROL V2.1 (Power TOUCH) Software CADmatic 5 (TAPIO READY) Lifting scissor table (mm) 3800 x 2200 Rear pushers (N.) 1 with clamps / grippers (7 + 2) Max. cutting width (mm) 3800 - Useful stroke of the pushing system (mm) 3800 Max blade projection (mm) 125 Scoring Unit (max saw diameter / power) mm 180 / Kw 2,2 (ca.) Main Sawing Unit (max saw diameter / power) mm 450 / Kw 28 Adjustable speed of the saw carriage (m/min) 1 - 150 Front supporting tables with Air blowing system (N.) 3 (2 x 2160mm x 800mm + 1 x 2810mm x 800mm) Total power (Kw) 34