Used B+M/Carel/Hygrex Paint Coating System for sale (97,057)

Condition: not inspected (used), Year of construction: 1999, functionality: unexamined, working width: 1,300 mm, working height: 110 mm, TECHNICAL DETAILS Max. working width: 1,300 mm Max. working height: 110 mm Min. working height: 8 mm EQUIPMENT Motorised feed rollers 2 brush units The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents with descriptive character. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. Psdsyqynuspfx Antept External reference: 7615

Condition: used, Year of construction: 1992, operating hours: 10,150 h, This Eder mobile crane M 825 B, used in a sawmill, was manufactured in 1992 and has approximately 10,150 operating hours. The crane is fitted with a Hultdins SuperSaw log grapple with integrated saw, allowing for the handling and cross-cutting of logs. Saw bar: 75 cm. Grapple opening: 58 cm. Rotor capacity: 16,000 kg. Bids from €10,000 excluding VAT. Ppedpfx Aeyzpg Aentot If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: new, Year of construction: 2026, VFK MANUAL POWDER COATING BOOTH WORKING PRINCIPLE Ppodpfxsvv Rfks Antjt The extraction fan is located at the top of the booth, at the end of the system. The pressurized air flow created by the fan carries the powder coating particles towards the filters and collects them on the outer surface of the filters. Powder coating filters are cartridge type and are cleaned during operation by a pull-reverse filter cleaning system. The pull-reverse system consists of pulse valves and a compressed air tank, controlled automatically or operated using manual buttons on the control panel. POWDER RECYCLING As a result of the filter cleaning system, powder coating particles fall down and are manually collected in a bucket at the bottom of the filter unit. This bucket can optionally be a simple drawer or can be with a sieve having a vibration motor with a powder pump to sift the powder coatings collected on it and transfer the sifted powders for reuse and send it to the powder recovery system for reuse. The powder coating booth is designed as single-sided open type for manual powder coating. There is an electrical panel on the system and the electrical wiring up to the motors has been done. Made in Türkiye CE Mark We offer the best technical solutions and competitive prices Contact us for more information and quotations

Condition: new, Year of construction: 2025, DESIGN VFDK powder booths are designed as an open wall cartridge filtered for manual powder coating use from one side. Powder booths are manufactured of externally powder coated sheet metal structure with castor wheels at the ground. The system consists of filtration system with automatic cleaning, ventilation and electrical control panel. Long lasting 100% polyester cartridge filters are used for high efficiency. WORKING PRINCIPLE Air flow generated by the extraction fan carries overspray powder coating particles to the filter unit and collects them at the outer surface of the filters. Filters are cleaned by pulse valve operated pull-reverse system during the operation. Powder coatings accumulated by this way at the ground of powder booth are collected manually in the drawer and can be reused after sieving. A hopper with vibrated sieve can be added optionally for powder recycling. ADVANTAGES Saves space in the workshop Easy and fast cleaning Made in Türkiye CE Mark We offer the best technical solutions and competitive prices Contact us for more information and quotations Podpfovv H Hdjx Antept

Condition: new, Year of construction: 2026, functionality: fully functional, working height: 2,200 mm, BUMEX Sp. z o.o. offers a professional industrial washing system designed for the preparation of components prior to the powder coating process. The equipment has been engineered for demanding industrial environments where washing efficiency, process stability, and long-term durability are essential. The washing system enables effective preparation of steel and aluminum components through a multi-stage cleaning, degreasing and rinsing process. Technical parameters Working chamber dimensions: 1500 × 3200 × 2200 mm Process technology: 3-stage washing process Process tanks The unit is equipped with three process tanks: tank for cleaning / degreasing chemicals tank for rinsing water tank for demineralized water (DEMI water) Tank capacity: 1500 – 2000 liters DEMI water generator The system is equipped with a demineralized water generator, ensuring high-quality final rinsing and optimal surface preparation before powder coating. Heating system The chemical tank is equipped with a heating system for the process liquid. Available heating options: oil heating gas heating electric heating Maximum operating temperature: up to 60°C Machine construction The machine is manufactured entirely from high-quality stainless steel AISI 1.4301, which provides: excellent chemical resistance long service life easy maintenance and cleaning The washer features: very robust industrial construction full thermal insulation of the entire machine to reduce energy losses spray system designed for minimal mixing of process liquids pre-filter for collecting contaminants high washing efficiency Control system The machine is equipped with a fully automatic control system, enabling precise control of: process temperature pump operation washing time sequence of process stages Why choose BUMEX? Our equipment stands out on the market due to: Ppodpfx Ajhfv D Sjntst very high manufacturing quality robust industrial construction operational safety complete technical documentation possibility of adapting the equipment to the existing production facility All machines manufactured by BUMEX Sp. z o.o. are CE certified. Additional technological support BUMEX also provides: powder coating booths dust extraction and filtration systems industrial ventilation systems professional technological consulting Cooperation conditions company transport available (price determined individually) VAT invoices issued short production lead times possibility of manufacturing machines in custom configurations and dimensions

Condition: new, Year of construction: 2025, MANUAL POWDER COATING PLANTS AND SYSTEMS Our design department will give you the best customized powder coating line solution which meets your product capacity demands. Made in Türkiye Ppodpfevv Nuqjx Antjt CE Mark We offer the best technical solutions and competitive prices * Office in France and Germany, Contact us for more information and quotations

Condition: used, Year of construction: 2001, x-travel 400 mm Ppjdoxab T Aopfx Antst y-travel 250 mm z-travel 400 mm tool taper ISO 40 spindle turning speed range 30-6300 / 20-4200 U/min feeds 0 - 10.000 mm/min quill stroke 90.0 mm table-size 600 x 320 mm T-slots 5 x 14 x 63 mm Control TNC 410 CA spindle ein ~ 126 Std. engine output 11.0 kW weight 1300 kg dimensions of the machine ca. 1600 x 1500 x 1900 mm Original price incl. special accessories ~ 72.000 euros Machine was very rarely used (!!) with only approx. 126 spindle hours (spindle on) Furnishing : - MACMOM / INAS CNC universal milling and drilling machine - HEIDENHAIN CNC path control TNC 410 CA * workshop-oriented path controls, with * Programming in easy-to-understand plain text dialog * HEIDENHAIN electr. Remote control with handwheel - Pivoting control panel, to the right of the machine - hydraulic tool clamping (tie bolt DIN69872-A) - Vertical milling head rotating on both sides - ISO 40 - Vertical speed range - infinitely variable .. 30-6300 rpm. - Horizontal speed range - stepless .. 20-4200 rpm. - robust, rigid angle table with 5x T-slots - Coolant device, with tub - Swarf spray protection cabin - Instruction manual for machine Special accessories included : - 1x pneumatic clamping plate, with aggregate - 1x WALTER TANIH125 NEGI-R dividing head - 1x machine vice - HILMA RÖMHELD type SM 100 - very many tool holders - Machine swing feet * Machine video : ?v=3dqLbTme81E

Year of construction: 2018, condition: excellent (used), functionality: fully functional, For sale: Beil M-B-HD-XL105 CTP plate bender. Year of manufacture: 2018 Pjdpfeuhlk Tsx Antspt Type number: 52200042 Serial number: 31269 Additional Information: • Sold directly by the seller • Viewing and testing available on-site • Consultations with our technician can be arranged • Currently located in Kaunas, Lithuania • Terms: EXW

Year of construction: 2023, condition: new, functionality: fully functional, 2x ICM19 Standard system designed for operation at ambient temperatures of 5 °C - 30 °C Pedpew Snm Uofx Antopt GA-drawing according to NEA standard arrangement P&ID No. EX-Protection PSR 11 + ATEX protective systems Power Supply 380 V ± 5% - 50 Hz Control cabinet designed for operation at environmental conditions of 5 °C - 30 °C. (altitude of installation side < 500m a.s.l.) Capacity Range 137 - 410 kg/h = 120 - 360 g/m³ at 19 m³/min system intake (cyclone collector operation) defined as feed rates to mill - not discharge Nominal Capacity 319 kg/h for fineness 99% < 105 microns at 19 m³/min system intake airflow (cyclone collector operation) Details for air intake mill < 11°C, flakes temp. < 25°C. flakes size < 25 mm, bulk density 0,6 - 0,7 kg/dm³

Condition: used, working width: 250 mm, Brushing Machine / Brushing Automat Manufacturer: Ceetec Model: A 250 Automatic brushing machine with brush application system Workpiece dimensions: Max. width: 250 mm Max. height: approx. 100 mm Length: from approx. 800 mm The painting machine is suitable for the application of paints, wood preservatives, as well as oils and waxes (e.g., for exterior cladding, decking boards, etc.) Technical specifications: - Electronic diaphragm pump (no compressed air required) - Spray nozzles for all-round application of wood preservatives - 12 rotating distributor brushes on 8 axes (standard nylon bristles) for four-sided application of coating materials Feed speed adjustable via feed roller, approx. 16-45 m/min. Capacity: approx. 960 – 2,500 meters/hour Power supply: 3 × 380 V EU Machine weight: approx. 350 kg Pjdpfxjyuapto Antept Machine will be cleaned and technically inspected before delivery. All hose connections, the diaphragm, and the set of brushes will be renewed! Delivery time: approx. 3-4 weeks

Condition: used, Year of construction: 2024, operating hours: 300 h, functionality: fully functional, 1. MERKUR Airless Pump 45:1 Ratio: 45:1 Maximum fluid output pressure: 310 bar Maximum air inlet pressure: 6.2 bar Fluid flow at 60 cpm: 3 lpm Volume per cycle: 50 cc Air consumption at 7 bar and 20 cpm: 0.48 m³/min Fluid inlet: ¾” Fluid outlet: 3/8” Includes: wall mount, surge filter, suction hose, suction pipe, suction filter. 2. XTR 5 Airless Manual Spray Gun Maximum fluid pressure: 345 bar Fluid passage: 2.3 mm Fluid inlet: ¼” Weight: 411 g Dimensions: length 111 mm x height 180 mm Wetted parts: aluminium, stainless steel, polyethylene, polyurethane, polypropylene, nylon, acetal, carbide, solvent-resistant O-rings. 3. Mini Merkur Airless 30:1 Ratio: 30:1 Maximum operating pressure: 207 bar Maximum tip size: 0.019” Fluid flow at 240 cpm: 1.5 lpm Air inlet: 3/8” Fluid outlet: ¼” Minimum compressor capacity: 1.5 HP Includes: wall mount, suction hose, suction pipe, suction filter. Key advantages: convertible wall mounting, pneumatic motor, consistent finishes, low air and material/solvent consumption. 4. Silver Plus Airless Manual Spray Gun Maximum fluid pressure: 345 bar Fluid inlet: ¼” Weight: 510 g Wetted parts: stainless steel, polyethylene, polyurethane, nylon, Teflon. 5. Product Hoses with Stainless Steel Braid Braid: AISI 304 Inner tube: Teflon Psdpoyx Irlefx Antopt Applications: chemicals, solvents, steam. Length: 10 metres Diameter: ¼"

Condition: new, Year of construction: 2025, Suction nozzle diameter: 300mm Pedpfx Aopfat Nentspt maximum volume flow: 6000 m³/h nominal volume flow: 5089 m³/h volume flow monitoring: pressure difference display Filter area: 31.8 m² Residual dust content: less than 0.1 mg/m³ Sound pressure level: 70 db Shrew bag volume: 480 l Filter cleaning: mororic Engine power: 7,5 kW Extinguishing device: yes Machine length: 3245 mm machine width: 1030 mm Machine height: 2595 mm Weight: 780 kg

Condition: used, mileage: 1,35,000 km, power: 287 kW (390.21 HP), first registration: 10/2014, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: orange, gearing type: automatic, loading space length: 5,400 mm, loading space width: 2,480 mm, loading space height: 600 mm, Year of construction: 2014, Equipment: ABS, crane, had accident, RENAULT C 380 TIPPER 5,40 m + CRANE Imported / Damaged Podpfordufyex Antept ? YEAR OF PRODUCTION: 2014 ? MILAGE: 135 000 km EQUIPMENT: ? ABS ? EL. WINDOWS ? EL MIRRORS ? POWER STEERING ? ENGINE BRAKE ? TACHOGRAPH TIPPER: 540 x 248 x 60 cm (L x W x H) CAPACITY: 13 000 kg TOTAL WEIGHT: 26 000 kg WHEELBASE: 430/135 cm TIRE SIZE: 315/80R22,5 SUSPENSION: AIR CRANE: PALFINGER PK 16001 K - B TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ?????

Condition: used, Year of construction: 1995, Used machine Ppedpfx Answka Hlotjt Year of manufacture: 1995 Equipment and technical data: efficient: - Turbo system: 25% higher system performance thanks to state-of-the-art application technology, all with the same space requirements! - Reduced throughput times due to optimized program automation for fast UV systems - Up to 70% cost savings compared to casting and spraying, thanks to the use of solvent-free systems and single-operator control flexible: - Cost-effective single-operator operation with return function or, alternatively, continuous operation for two-person operation - Expandable: The system can be upgraded with additional roller, smoothing, or sanding units ergonomic: - Simple operation thanks to ergonomic controls service-friendly: - Cleaning cycle and quick-change system process-safe: - Top-quality surfaces, precisely reproducible Included: - Roller conveyor, 2000 mm long - ELX 1400 roller conveyor - Bar conveyor, 3000 mm long - UV drying tunnel, 1 lamp 60/80/120 W Working height: 850 - 950 mm Application roller, rubberized: D=238 mm Dosing roller, chrome-plated: D=174 mm Passage height: 3–120 mm UV lamp module: 80/120 W mercury Connected load: approx. 21 kW Dimensions: 1300 x 3080 mm Availability: short notice Location: Röllbach

Condition: good (used), conveyor belt, belt conveyor, transport belt, belt conveyor -Conveyor system: with sheet metal support -Speed: 2 m/min -Drive: VEM 0.18 kW -Dimensions: see photos -Dimensions: 2540/780/H870 mm Ppedpfxjvpd Hue Antst -Weight: 168 kg

Condition: used, Gear motor, electric motor, electric gear motor, bevel gear motor -Manufacturer gearbox: ZAE geared motor with brake -Gear: Type M 50 B i = 40 : 1 -Speed: 7/70 rpm -Motor: Kobold type PO619-3-16/2MB -Power: 0,04/0.55 kW / 280 /2800 rpm Ppjdsmrxanopfx Antst -Shaft: Ø 20 x 25 mm / 23 x 48 mm -Protection class: IP44 -Brake: 8 Nm -fan motor -Dimensions: 610/195/H183 mm -Weight: 26 kg

Condition: excellent (used), Roller chain, drive chain -Length per package: 5 m -reinforced 16B-1 roller chain -1-fold 1" x 17.02 -Number: 10 packages available Ppsdeb A Niuspfx Antjt -Price: 28 euros/m

Condition: good (used), Roller chain, drive chain -various lengths 5 m 10 m -16B-1 roller chain Pjdpfeb A St Isx Antjpt -1-way 1" x 17.02 mm -Price: 28 euros/m

Condition: new, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ). Seppi M. H-SMO-B 125 Mulcher / NEW / in stock & immediately available Price: €11,790.00 net / €14,030.10 gross Working width: 125 cm Overall width: 140 cm Depth: 120 cm Height: 60 cm Weight: 380 kg Support roller: 152 mm V-belts: 4 - Powerful and manoeuvrable attachment suitable for excavators or crawler vehicles, ideal for maintaining embankments and fallow land - Mulches grass and light brush up to 7 cm diameter - Suitable for excavators from 5 to 13 tons Podpfx Ansymi Enetept - Designed for mounting on various adapter plates - Drive designed for hydraulic motor according to the carrier unit's oil flow - Indirect belt drive with 4 V-belts - Drop-forged counter blades - Double-skinned housing made from high-tensile steel - Adjustable discharge hood with rear rubber guard - Reinforced support roller with double taper roller bearings, height-adjustable by 5 cm - Rotor wall thickness: 12.5 mm - Front protection with chains - Colour: red RAL3020 · anthracite RAL7021 OPT 371 Rotor with SMO flails (standard) - 12 pieces, part no. 130.02.001 OPT 291 VARIO FLOW - Axial piston hydraulic motor with variable displacement 29-58 cm³ and pressure relief valve - Displacement in cm³ (min-max): 29 - 58 - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic oil flow in l/min (min-max): 60 - 120 OPT 099 Floating mounting (parallel linkage) Optional: MS08 adapter plate incl. bolts and installation = €750.00 net Three hydraulic connections required: pressure, return, and drain. Unit delivered without hoses or couplings. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. We have a very large selection of various Seppi M. products available for immediate delivery in our warehouse! Simply contact us at / . Finance options available upon request. We are an official Seppi M. sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official DMS sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. With 800 used commercial vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. We can supply the full range of Seppi M. products! Errors and prior sale excepted! = Further Information = Please contact Marius Herden for further details.

Condition: used, Year of construction: 1973, grinding diameter max. 30 mm regulating wheel width 12 mm max. width of grinding wheel mm total power requirement kW weight of the machine ca. t Podpet Hwwwsfx Antept dimensions of the machine ca. m

Condition: good (used), Paint roller machine, roller coating machine, powder coating system -Drying and exhaust air: used for slat/blind production -Dimensions: 2950/800/H1920 mm -Weight: 484 kg Pjdpfxsgal Agj Antjpt

Condition: used, Year of construction: 2011, total height: 3,900 mm, total length: 48,000 mm, total width: 12,000 mm, space requirement length: 48,000 mm, space requirement width: 18,000 mm, Equipment: cabin, SAMES automatic powder coating system The offer includes the following components: 1. Automatic transport system with a travel speed of 1 m/min and a DEMAG elevator 2. Surface preparation components: - Water treatment system - 3 water tanks - Surface preparation tunnel 3. Dryer with RX500 thermoreactors measuring 5.0 m long and 2.4 m high, along with a control unit 4. Painting unit components: - Spray booth - 2 RFV 2000 manipulators - Powder coating mixing center - Control cabinet - 6 powder applicators - PVV recycling kit - Filter unit - Filter press - Tanks for the powder coating mixing center - Fire extinguishing unit - Paint shop control system Podpowcfppsfx Antjpt 5. RX500 thermoreactor oven measuring 9.0 m long and 2.4 m high, along with a control unit

Condition: like new (used), Year of construction: 2021, functionality: fully functional, total height: 3,000 mm, total length: 8,880 mm, total width: 4,000 mm, volume flow: 38,000 m³/h, type of input current: three-phase, workpiece weight (max.): 80 kg, compressed air connection: 8 bar, suction capacity: 38,000 m³/h, load capacity: 80 kg, heating capacity: 340 kW (462.27 HP), Equipment: cabin, lighting, For sale is a brand new wet painting line. Internal dimensions of the cabin 8880x4000x3000mm. Overhead conveyor of products with a length of 41m. Pitch of swivel hinges 400mm. Load capacity 80kg/m. Production speed maximum 4m/min. Large door to the cabin 2000x2500mm (possibility of painting large parts). Ventilation exhaust unit 38,000m3/min. Paint preparation room including membrane pump 01D140. Application electrostatic gun. Gas heating 340kW. Podewmm U Ujpfx Antjpt

Condition: used, Automatic wooden chair painting system, already disassembled and sold in separate pieces: - 3 roller shutter belts, 2.5 metres wide - 3 roller shutter belts, 4 meters wide - 2 painting chains consisting of tracks, chain, towing motor and hangers - spray booths - correspondence desks - various Psdpfx Anoxlb E Aotopt

Condition: used, System D8 brand painting chain, 94.50 linear meters, complete with towing, tracks and chain. Psdpfx Anom D Hcfotept