Used Casadei / Scm - Sofort Verfügbar Libra 10/95 Tc Aktionsausstattung - for sale (34,366)

Condition: new, mileage: 100 km, power: 350 kW (475.87 HP), fuel type: diesel, overall weight: 18,000 kg, brakes: retarder, color: black, gearing type: automatic, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Equipment list Lrodps Aa Hqdsfx Akmju WHEELBASE 5500 MM AIR INTAKE, CORNER-MOUNTED, INTEGRATED IN CAB WATER PUMP, REGULATED INSECT PROTECTION GRILLE, IN FRONT OF RADIATOR HIGH PERFORMANCE ENGINE BRAKE AIR COMPRESSOR, TWO-STAGE, SWITCHABLE FRAME, SCREWED FRAME OVERHANG 1350 MM ADBLUE TANK 75L, LEFT TANKS, LOCKABLE PROTECTIVE CAP FOR ADBLUE DOSING SYSTEM TANK CROSS-SECTION, NARROW TANK CROSS-SECTION, LOW EXHAUST SYSTEM, TAILPIPE TO THE RIGHT OUTSIDE EXHAUST BOX FENDER, FRONT, RIVETED, AERODYNAMICALLY OPTIMIZED FENDER, FOR CHASSIS EXTENSION SPLASH GUARD (EC), FRONT FRONT UNDERRUN PROTECTION (ECE), ALUMINUM BUMPER, CORNERS MADE OF PLASTIC BUMPER, CENTER SECTION WITH TOWING EYE BRAKE SYSTEM CAB TILT MECHANISM, MECHANICAL-HYDRAULIC WINDSCREEN TINTED, WITH BAND FILTER LIGHT SENSOR RAIN SENSOR STORAGE COMPARTMENT, LEFT BELOW CAB ENTRY, LACKED DOOR EXTENSION CAB ENTRY LEFT/RIGHT, FIXED FRONT MIRROR, HEATED MIRRORCAM SUN VISOR, EXTERIOR, TRANSPARENT A-PILLAR TRIM, AERODYNAMICALLY OPTIMIZED OMISSION OF WIND DEFLECTORS AIR HORN, CAB ROOF CLOSING SYSTEM, WITH CENTRAL LOCKING COMFORT CLOSING SYSTEM CAB INTERIOR DRIVER'S AIR-SUSPENDED SEAT, CLIMATE-CONTROLLED PASSENGER FUNCTIONAL SEAT SEAT BACK, UNLOCKING, DRIVER'S SEAT ARMRESTS, ON BOTH SIDES, PASSENGER SEAT SEAT BELT WARNING SEAT COVER, DINAMICA, BLACK, DRIVER'S SEAT SEAT COVER, DINAMICA, BLACK, PASSENGER SEAT SEAT BOX LOW, LOWERED BY 40 MM COMFORT BED, LOWER MATTRESS TOPPER FOR COMFORT BED, LOWER MATTRESS, EXTRA PREMIUM COMFORT, LOWER PREPARATION COMFORT BED, UPPER, WIDE LEATHER STEERING WHEEL AIRBAG, DRIVER FLOOR MAT, ENGINE TUNNEL THE SUNBLIND, 1-PART, ELECTRIC WINDSCREEN BLIND, ACROSS IN FRONT OF BED (EN) SUNBLIND, SIDE, DRIVER AND PASSENGER SIDE REAR VIEW CAMERA, TRACTOR UNIT TACHOGRAPH MANUFACTURER VDO MULTIMEDIA COCKPIT INTERACTIVE 2 PREPARATION REMOTE TRUCK 3.0 APP DIGITAL RADIO J2J SOUND SYSTEM NAVIGATION SYSTEM INTERFACE, FLEET MANAGEMENT SYSTEM EMS REMOTE UPDATE OF DRIVER ASSISTANCE MAP PREREQUISITE FLEETBOARD MANAGER APP PREPARATION FOR WALL FIXING SOCKET 24 V/15 A, REAR SEAT PREPARATION FOR ELECTRICAL EQUIPMENT LED AMBIENT LIGHTING, DRIVING AND LIVING 2 LED WORK LIGHTS, SWAN NECK AUXILIARY HEATER, HOT WATER CAB NOISE AND HEAT INSULATION ELECTRIC STAND-ALONE AIR CONDITIONING SYSTEM CLIMATE CONTROL STORAGE COMPARTMENTS, ABOVE WINDSCREEN, ONE LOCKABLE STORAGE COMPARTMENT COVER, DRIVER AND PASSENGER SIDE DRAWERS, UNDER BED DRAWER, UNDER BULKHEAD SHELVING SYSTEM, FLEXIBLE, FOR STORAGE ABOVE WINDSCREEN TABLE, ON PASSENGER SIDE Y1T NOTEBOOK HOLDER REFRIGERATOR, IN DRAWER, UNDER BED THE COMPRESSED AIR CONNECTION, IN THE CAB ELECTRIC / ELECTRONICS CABLE REMOTE CONTROL FOR AIR SUSPENSION PREPARATION SWITCH, LIFT AXLE, SEMI-TRAILER/ TRAILER PSM 2ND GENERATION E4C ADDITIONAL FUNCTIONS, FOR BODY MANUFACTURER TRAILER SOCKET 24 V, 15-PIN LED DAYTIME RUNNING LIGHT LED HEADLIGHTS INTELLIGENT LIGHT FOG LIGHTS LED PREPARATION, HEADLIGHTS ADDITIONAL, ROOF REAR LIGHTING HARNESS, EXTENDED LED REAR LIGHTS PREPARATION, WORK LIGHTS, CAB REAR LED SIDE MARKER LIGHTS SIDE MARKER LIGHTS, BLINKING PREPARATION ALL-ROUND ROTATING BEACON LED BLINKERS IN LIGHT SIGNATURE PHOTO MERCEDES STAR, ILLUMINATED LIGHTING REGULATION SPEED LIMITER 90 KM/H / 56 MPH, ECE GOT PREDICTIVE POWERTRAIN CONTROL J7V DRIVER ASSISTANCE ATTENTION ASSIST S10 TRAFFIC SIGN RECOGNITION ACTIVE BRAKE ASSIST 6 ACTIVE SIDEGUARD ASSIST 2 FRONTGUARD ASSIST

Condition: new, Year of construction: 2026, Exceptional special price, as it was used at our in-house trade fair. Operating hours: 2 Lrodpfx Aolht H Eokmju Immediately available – subject to prior sale. First come, first served. Compact design, high reliability, and excellent value for money: these are the advantages of this machine, which is perfectly suited for briquetting materials such as wood, polystyrene, foams, or paper. A special feature is the screw pre-compaction, which guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. Overall dimensions: 1900 x 1410 mm Hopper opening: 1044x1044 mm Hopper height: 1010 mm Hopper volume: 1.1 m³ Drive power: 4 kW Briquette diameter (mm): 40 Throughput (kg/h): 30-40 Hydraulic oil volume (l): 100 Weight (kg): 530 Equipment: Press Powerful pressing mechanism with wear-resistant, chrome-plated jaws Pre-compactor with end-position dampened cylinder and bolted cover Switchgear with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Tank with agitator and gear motor Screw channel with discharge screw and gear motor Accessories: Briquette length monitoring Automatic on/off Location: 54634 Bitburg

Condition: new, Year of construction: 2026, Miter and compound miter saw with a maximum cutting height of 170 mm sturdy cast iron construction precise ball bearing guide for the tool carriage on hardened and ground steel shafts manual saw feed quick miter adjustment up to 65° horizontal adjustable fixed stops lower saw blade guard, can be connected to a dust extraction system Model-----Motor-----Speed-----Cutting length ZS 170: 400 V / 2.0 kW--3500 rpm---410 mm (at 90 degrees) Model-----Cutting height----Miter range horizontal ZS 170 ----- 170 mm----- 45 degrees -90 degrees Model-----Saw blade-----Dust extraction port-----Weight ZS 170 -----420 mm----- 100 mm ----- 120 kg Accessories available upon request: Roller conveyor / fence type RO, RL, RLK, RLH and RLHK for processing aluminum and PVC profiles and for wood profile board processing the modular roller conveyor system can be supplied as: 3 m type RO: infeed roller conveyor with at least 2 support feet 3 m type RLK: roller conveyor fence with a fence slide that can be folded back - Machine stand - Main switch with lock - Infeed roller conveyor Ro-St60 3 meters, right - Roller conveyor RLK-ST60 L 3.0 meters, measuring length Lsdocnz N Hjpfx Akmoru Heavy-duty fence/roller conveyor mm - scale on the rear beam, measuring slide with magnifying glass and fence flap - Saw blade 420 x 3.5 x 40 Z 84 Neg Location: In stock at 54634 Bitburg - free loading - - immediately available - Location: In stock at 54634 Bitburg - free loading - - immediately available -

Condition: ready for operation (used), Year of construction: 2009, operating hours: 1,000 h, spindle speed (max.): 2,600 rpm, travel distance X-axis: 360 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 980 mm, spindle motor power: 22,000 W, overall weight: 7,000 kg, controller manufacturer: SIEMENS, controller model: 840D Solution Line, number of axes: 4, This 4-axis SPINNER TC800 was manufactured in 2009. It features a radial turret and is equipped with Siemens control, ensuring reliable operation. With approximately 1,000 operating hours, this machine has been barely used. If you are looking to get high-quality turning capabilities, consider the SPINNER TC800 horizontal turning machine we have for sale. Contact us for further details. • Control: Siemens 840D Solution Line • Rapid traverse X-axis: approx. 18 m/min • Rapid traverse Z-axis: approx. 24 m/min • Main spindle speed: up to approx. 4000 rpm • Main spindle power: approx. 24 kW (100%) • Main spindle power: approx. 33 kW (40%) • Spindle nose: A11 • Bar capacity: approx. 77 mm • Tool turret type: VDI 50 • Number of tool stations: 12 • Driven tools: Yes • Number of driven tools: up to 12 • Driven tool speed: up to approx. 4000 rpm • Maximum turning diameter: approx. 500 mm • Maximum swing over bed: approx. 800 mm • Maximum turning length: approx. 800 mm • Tailstock taper: MK4 • Tailstock stroke: approx. 100 mm • Tailstock force: approx. 8500 N • Voltage: 400 V • Frequency: 50/60 Hz • Control voltage: 24 V DC • Compressed air pressure: approx. 6–10 bar • Hydraulic pressure: approx. 70 bar • Chip conveyor: Yes • Coolant system: Yes • Hydraulic unit: Yes • Electrical cabinet: Yes • Radial turret • No quill • Barely used, approximately 1,000 operating hours Technical Specification Counter Spindle No Lrodpfx Akeyv Epvomsu Driven Tools Yes

Condition: as good as new (ex-display), Year of construction: 2026, Technical specifications: Laminated panel press from our showroom; Working area: width from 150 - 2,550 mm, height from 150 - 1,400 mm, depth from 150 - 700 mm; Variable pressure adjustment 300/700/1100/1400/1800/2200 dN (kg) of the side pressing beam; Variable pressure adjustment 500/800/1200/1500/1900/2200 dN (kg) of the top pressing beam. Simple operation via 6 separate push buttons, freely adjustable pre-selection of pressing time with automatic opening function, loading height 300 mm. The machine is in our showroom and can be delivered immediately. Ljdpfxeb Eln De Akmoru Location: available from our warehouse in 54634 Bitburg.

Condition: used, Year of construction: 2002, functionality: fully functional, grinding width: 1,100 mm, overall weight: 6,600 kg, type of input current: three-phase, The machine is in working condition. 2+2 level grinding is possible. Lrsdpfoyybgrjx Akmsu

Condition: new, Year of construction: 2023, Stable cast iron construction Milling spindle can be swiveled backwards from 0° to -45° Right-left rotation of the milling spindle Generously dimensioned milling unit made of cast iron, attached directly to the table Solid and precise cast iron table Standard curved milling protection hood Ljdpfsiknp Rox Akmjru Aluminum sliding carriage ball contact system Torsion-resistant, highly precise, smooth-running and problem-free in daily use 10-year SCM guarantee on wear of the guideways Milling spindle mounted high up with precision ball bearings, resulting in the lowest possible bearing load and the longest possible service life Exact router fence with quick adjustment and fine adjustment with a scale on the stop jaw Integrated suction connection Large milling table opening allows the use of larger tools Weight approx. 290 kg Extraction connection diameter 2 x 120 mm Working table L x W = 1000 x 435 mm Table height 900 mm Sliding carriage length 1000 mm Sliding carriage width 270 mm Drive motor power 5.0 kW, 400 V, 50 Hz Milling spindle inclination 0 to -45 ° Spindle usable length 100 mm Overhang max. above table 130 mm Spindle speeds 3500/7000/10000 rpm Mandrel diameter 30 mm Tool diameter max. lowerable 180 mm

Condition: new, Year of construction: 2026, The VPR-4000 vacuum membrane press is a universal press for woodworking and thermoforming. The VPR-4000 press is also swiveling and mobile. Possible applications: Veneering / Form gluing / Encasing... Coating of various profiles (veneer, paper, plastic...) Wood bending: Production of curved and laminated components Vacuum system: Work surface with vacuum channels for uniform negative pressure, even with large workpieces. Becker vacuum pump / Oil-free / Tank capacity 100 l Work surface: 4000x1500mm Pump power: 0.75 kW Vacuum pump capacity: 40 m3/h Rubber membrane Lsdeyr R Hwjpfx Akmsru External dimensions: 4100 x 1650 x 1000 mm Weight: 400 kg Location: In stock at warehouse 54634 Bitburg - free loading -

Condition: new, Immediately available Fassi cranes in the respective versions: - Fassi F135 A.0.24 (4-section hydraulic extension) - Fassi F235 A.2.24 (4-section hydraulic extension) - Fassi F235 A.2.26 (6-section hydraulic extension) - Fassi F255 A.2.24 (4-section hydraulic extension) Ledjz Hkckepfx Akmeru - Fassi F255 A.2.26 (6-section hydraulic extension) - Fassi F545 RA2.28 (8-section hydraulic extension) incl. additional support struts Each with very good equipment: - Control system for 2 additional functions with »2 hose guides for e.g. grapples or clamps (5th & 6th control circuit), with the exception of the F545 - Hydraulic outriggers, operable via remote control - LED work lights - Scanreco remote control with cross-lever, charger and carrying straps - Electronic overload protection system - Emergency shut-off and optical alarm (90% and 100%) including adjustable digital swing limiter - FASSI stability control FSC including LMB II - From F235 model size: double-knee lever system with over-extension of the boom up to 15° - Manual extensions for the 5th and 6th sections available at an extra cost (can be ordered individually for each crane) - For Fassi F545 series = incl. preparation for a winch (the V30 winch can be fully retrofitted at any time) Individual financing is possible with one of our financing partners. This is a non-binding offer. Subject to prior sale, errors and changes. = Further information = Price: On request

Condition: as good as new (ex-display), Year of construction: 2025, Technical specifications POWER UNIT 160 P: • Intake nozzle diameter: 160 mm • Rated motor power: 2.2 kW; 400 V/50 Hz • Max. volume flow: 2000 m³/h • Rated volume flow: 1448 m³/h • Vacuum: 2503 Pa • Filter area: 9 m² • Filter cleaning: Compressed air cleaning • Collection container (rolling container): 241 liters • Dimensions (L x W x H): 1684 x 830 x 2050 • Weight: 288 kg • Design / Operating side, selectable: right / left Location: In stock at warehouse 54634 Bitburg Ljdpfxsbpg Itj Akmeru Excellent price for the showroom model.

Condition: as good as new (ex-display), Year of construction: 2025, Basically a new machine, it was demonstrated at our in-house trade fair (3 days). 5 operating hours. Technical data 300-P Intake nozzle: 300 mm Motor rated power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Max. volume flow: 6,000 m³/h Rated volume flow: 5,089 m³/h Negative pressure: 2,280 Pa Ledpfx Akobqachomjru Filter area: 30 m² Chip collection volume: 3 x 165 L Dimensions (L/W/H) in mm: 2963 x 994 x 2346 Weight: 880 kg Location: Available from warehouse 54634 Bitburg Immediately available Subject to prior sale.

Condition: new, Year of construction: 2022, Swivel spindle 0° - 45° Height and swivel adjustment via handwheel Ljdpjipv A Tefx Akmoru Dial indicators in the handwheel Motor power 7.0 kW 4 speeds 30mm milling spindle Aluminum clamping jaws Milling fence with crank adjustment Long cast iron tables Safety rulers

Condition: new, Year of construction: 2026, Holzkraft bandsaw HBS 533 S. Heavy-duty professional model with high weight for maximum smooth operation. Particularly quiet and precise operation thanks to a torsion-resistant machine housing. Large, one-piece cast iron saw table, swiveling from 0° to +20° with a ground and polished surface. Patented table tilting mechanism with handwheel and rack and pinion. Saw blade quick-release tensioning system. Ceramic saw blade guide rollers. Large cast iron parallel fence. Fast and precise adjustment of cutting height via handwheel and rack and pinion with millimeter scale. Safety switch for automatic shutdown when the door is opened. Large cast iron parallel fence. Comes standard with a miter gauge. Flywheels made of cast iron with a special coating on the running surfaces. Inspection window for checking the saw blade run. Professional saw table guide. The heavy, solid cast iron saw table is easily and conveniently adjusted via a handwheel and rack and pinion guide. The tilt is continuously adjustable from 0° to +20°. Patented. Work table dimensions: 750 x 530 mm Cutting speeds: 1400 m/min. Flywheel diameter: 530 mm Lrjdpfjb S Uzksx Akmou Max. cutting height: 350 mm Max. cutting width with fence: 465 mm Max. cutting width without fence: 510 mm Bandsaw blade length: 4190 mm Precision guide: top / bottom Saw table tilt: 0° - +45° Motor power 400 V/50 Hz/P2: 4.0 kW Weight: 305 kg Dimensions: 1000 x 720 x 2040 Dust extraction port diameter: 2 x 100 mm Location: In stock, Bitburg.

Condition: new, Year of construction: 2025, Description: IE 3 motor as standard Lodpfxecqy I Sj Akmjru Maximum volume flow up to 8,500 m³/h at the fan Approximately 73 m² filter area, residual dust content after H3 Pre-separator as standard 71 dB (A) at full load (according to DIN EN ISO 11201) Already meets the requirements of prEN 16770 Optional: Models with type-tested rotary valve airlock (FSA) Tested backflow damper Integrated automatic extinguishing system Suction nozzle: 350 mm Motor rated power: 11 kW Voltage: 400 V / 50 Hz Maximum volume flow: 8500 m³/h Rated volume flow: 6927 m³/h Negative pressure at Vnenn.: 2765 Pa Filter area: 73 m² Chip collection volume: (net/gross) 3 x 165 L / 3 x 241 L Sound pressure level: 71 dB (A) Dimensions (L x W x H): 3112 x 1058 x 2351 mm Weight: 1074 kg Location: in stock at 54634 Bitburg

Condition: new, mileage: 100 km, power: 390 kW (530.25 HP), fuel type: diesel, overall weight: 44,000 kg, axle configuration: > 3 axles, color: yellow, gearing type: automatic, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), parking heater, Available Immediately!!! Vehicle located at Triftstr. 29, 38723 Seesen Specially designed recovery arm with lifting yoke for lifting, towing damaged vehicles, trucks, tractor units, buses, trailers, etc. Complete hydraulic system. 3rd coat of paint HDRV (STANDARD) STORAGE BOXES (inside): yellow RAL 1032 STORAGE BOXES (outside): yellow RAL 1032 LIFTING YOKE: black, powder-coated RAL 9005 RECOVERY ARM: black, powder-coated RAL 9005 REAR SUPPORT LEGS: black, powder-coated RAL 9005 COUNTERWEIGHT (front, under cab, if applicable): black, powder-coated RAL 9005, smooth on the front side. 4. Intermediate frame (STANDARD) - hot-dip galvanized - for mounting the counterweight in the front - rear part painted in body color. 5. Recovery arm (STANDARD) - lifting angle 40° (Fig. HDRV 1013) - mounting plates for main and auxiliary winch - shackles 2x15000kg - left and right side in the rear part of the arm - space for spare wheel holder on the recovery arm. 6. Lifting Yoke (STANDARD) - Area position with respect to the horizontal axis -5° / +10° - Load capacity in retracted state 20000kg - Load capacity in extended state 10000 kg - Extension 3800 mm - Reach to vehicle axle. 7. Hydraulic support legs at the rear (STANDARD) - independently controlled - maximum width -3000mm - rotatable support legs for working on asphalt and on the ground. 8. Hydraulically extendable beam No HDRV 1013 Individual extension 0 - 3000mm maximum payload 2000 - 9000kg 9. Relocation of the tank behind the cab - Relocation of the air tank behind the cab - Relocation of the battery behind the cab - Relocation of the AdBlue tank - Counterweight behind the cab on the frame in the front (weight 100kg) - Main winch COME UP Bison 50, mounted on the recovery arm, pulling force 22.6T - Auxiliary winch COME UP Bison 50, mounted on the recovery arm, pulling force 22.6T. 16. Hydraulic system (STANDARD) - Dual hydraulic pump (STANDARD) - hydraulic control block on the right side (STANDARD) - on right side, in rear storage box. 19. Connections for supplying the braking systems, transferred from the chassis - quick coupling with cable 20 meters - air pressure roller, on the left side of the superstructure, mounted over the rear axles. 21. Electric connector for trailer + trailer hitch, transferred from the chassis Lrjdpfxsz Sitho Akmju - Jump start 12V/24V, cable, lever, mounted on the right side - Jump start 12V/24V, cable, lever, mounted on the left side - Camera + LCD screen in the cab - Camera over winch + LCD screen in the control box SCREEN: - Vibration resistance: 10G - Impact resistance: 100G - Operating temperature: -30 to + 70 ° C - CE marking - EMC approval: E26. Control of EMERGENCY STOP switch - Wireless remote control - 1 function - Made of aluminum - Holder for tools and accessories - Floor with rubber mats - small ladder - Auxiliary ladder in storage boxes. 29. Storage box opening - doors - Railing on storage boxes - stainless steel - Aluminum platform, perforated, mounted on the upper part of the storage boxes - Stainless steel holder in large storage box, behind the cab, for fork, hook, open box. 33. All edges of the storage boxes are finished with stainless steel profiles - Bunk bed mounted in storage box 35. Lighting package complies with road traffic regulations - LED lighting in storage boxes - LED lighting, outside - LED warning light bar GAMET DE LUX, 1800mm - Mounting of the warning light bar on the upper part of the superstructure - Warning light ORANGE BLTZ, 2 pieces - front mou

Condition: new, mileage: 100 km, fuel type: diesel, overall weight: 18,000 kg, brakes: retarder, color: yellow, gearing type: automatic, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Equipment list Lredez Sipijpfx Akmou WHEELBASE 5500 MM AIR INTAKE, CORNER-MOUNTED, INTEGRATED IN CAB WATER PUMP, REGULATED INSECT PROTECTION GRILLE, IN FRONT OF RADIATOR HIGH PERFORMANCE ENGINE BRAKE AIR COMPRESSOR, TWO-STAGE, SWITCHABLE FRAME, SCREWED FRAME OVERHANG 1350 MM ADBLUE TANK 75L, LEFT TANKS, LOCKABLE PROTECTIVE CAP FOR ADBLUE DOSING SYSTEM TANK CROSS-SECTION, NARROW TANK CROSS-SECTION, LOW EXHAUST SYSTEM, TAILPIPE TO THE RIGHT OUTSIDE EXHAUST BOX FENDER, FRONT, RIVETED, AERODYNAMICALLY OPTIMIZED FENDER, FOR CHASSIS EXTENSION SPLASH GUARD (EC), FRONT FRONT UNDERRUN PROTECTION (ECE), ALUMINUM BUMPER, CORNERS MADE OF PLASTIC BUMPER, CENTER SECTION WITH TOWING EYE BRAKE SYSTEM CAB TILT MECHANISM, MECHANICAL-HYDRAULIC WINDSCREEN TINTED, WITH BAND FILTER LIGHT SENSOR RAIN SENSOR STORAGE COMPARTMENT, LEFT BELOW CAB ENTRY, LACKED DOOR EXTENSION CAB ENTRY LEFT/RIGHT, FIXED FRONT MIRROR, HEATED MIRRORCAM SUN VISOR, EXTERIOR, TRANSPARENT A-PILLAR TRIM, AERODYNAMICALLY OPTIMIZED OMISSION OF WIND DEFLECTORS AIR HORN, CAB ROOF CLOSING SYSTEM, WITH CENTRAL LOCKING COMFORT CLOSING SYSTEM CAB INTERIOR DRIVER'S AIR-SUSPENDED SEAT, CLIMATE-CONTROLLED PASSENGER FUNCTIONAL SEAT SEAT BACK, UNLOCKING, DRIVER'S SEAT ARMRESTS, ON BOTH SIDES, PASSENGER SEAT SEAT BELT WARNING SEAT COVER, DINAMICA, BLACK, DRIVER'S SEAT SEAT COVER, DINAMICA, BLACK, PASSENGER SEAT SEAT BOX LOW, LOWERED BY 40 MM COMFORT BED, LOWER MATTRESS TOPPER FOR COMFORT BED, LOWER MATTRESS, EXTRA PREMIUM COMFORT, LOWER PREPARATION COMFORT BED, UPPER, WIDE LEATHER STEERING WHEEL AIRBAG, DRIVER FLOOR MAT, ENGINE TUNNEL THE SUNBLIND, 1-PART, ELECTRIC WINDSCREEN BLIND, ACROSS IN FRONT OF BED (EN) SUNBLIND, SIDE, DRIVER AND PASSENGER SIDE REAR VIEW CAMERA, TRACTOR UNIT TACHOGRAPH MANUFACTURER VDO MULTIMEDIA COCKPIT INTERACTIVE 2 PREPARATION REMOTE TRUCK 3.0 APP DIGITAL RADIO J2J SOUND SYSTEM NAVIGATION SYSTEM INTERFACE, FLEET MANAGEMENT SYSTEM EMS REMOTE UPDATE OF DRIVER ASSISTANCE MAP PREREQUISITE FLEETBOARD MANAGER APP PREPARATION FOR WALL FIXING SOCKET 24 V/15 A, REAR SEAT PREPARATION FOR ELECTRICAL EQUIPMENT LED AMBIENT LIGHTING, DRIVING AND LIVING 2 LED WORK LIGHTS, SWAN NECK AUXILIARY HEATER, HOT WATER CAB NOISE AND HEAT INSULATION ELECTRIC STAND-ALONE AIR CONDITIONING SYSTEM CLIMATE CONTROL STORAGE COMPARTMENTS, ABOVE WINDSCREEN, ONE LOCKABLE STORAGE COMPARTMENT COVER, DRIVER AND PASSENGER SIDE DRAWERS, UNDER BED DRAWER, UNDER BULKHEAD SHELVING SYSTEM, FLEXIBLE, FOR STORAGE ABOVE WINDSCREEN TABLE, ON PASSENGER SIDE Y1T NOTEBOOK HOLDER REFRIGERATOR, IN DRAWER, UNDER BED THE COMPRESSED AIR CONNECTION, IN THE CAB ELECTRIC / ELECTRONICS CABLE REMOTE CONTROL FOR AIR SUSPENSION PREPARATION SWITCH, LIFT AXLE, SEMI-TRAILER/ TRAILER PSM 2ND GENERATION E4C ADDITIONAL FUNCTIONS, FOR BODY MANUFACTURER TRAILER SOCKET 24 V, 15-PIN LED DAYTIME RUNNING LIGHT LED HEADLIGHTS INTELLIGENT LIGHT FOG LIGHTS LED PREPARATION, HEADLIGHTS ADDITIONAL, ROOF REAR LIGHTING HARNESS, EXTENDED LED REAR LIGHTS PREPARATION, WORK LIGHTS, CAB REAR LED SIDE MARKER LIGHTS SIDE MARKER LIGHTS, BLINKING PREPARATION ALL-ROUND ROTATING BEACON LED BLINKERS IN LIGHT SIGNATURE PHOTO MERCEDES STAR, ILLUMINATED LIGHTING REGULATION SPEED LIMITER 90 KM/H / 56 MPH, ECE GOT PREDICTIVE POWERTRAIN CONTROL J7V DRIVER ASSISTANCE ATTENTION ASSIST S10 TRAFFIC SIGN RECOGNITION ACTIVE BRAKE ASSIST 6 ACTIVE SIDEGUARD ASSIST 2 FRONTGUARD ASSIST

Condition: new, Year of construction: 2025, Martin T 45 thickness planer with Tersa cutterblock Lodpeqlclbefx Akmjru Accessories: 7,5 KW The T45 thickness planer offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. blocking for easy cutter change - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, finely planed table surface - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: ready for operation (used), Bosch SM 10/20-TC servo module SN:481559, professionally fully overhauled and tested with 12 months warranty, 100% functional, scope of delivery as shown in the photos. The agreed sales discounts do not apply to this item. Please request the price separately! Lrodpfex Eqylex Akmju

Condition: as good as new (ex-display), Year of construction: 2026, Low-noise and low-speed model WL 4/18.5 kW Technical data: Hopper opening: 600 x 800 mm Hopper opening with log spacer: 600 x 1050 mm Hopper capacity: approx. 0.6 m³ Working width of the rotor: 600 mm Diameter of the rotor: 252 mm Number of knives: 28 pieces Knives: 40 x 40 mm, concave Screen perforation: 15/20 mm Included: Control cabinet Lredpsbtnftsfx Akmsu Electrical control system Star-delta starter Rubber vibration dampers 2nd knife row Log spacer (self-cleaning hopper) Top-of-the-line equipment Location: In stock in Bitburg - immediately available - at a special price.

Condition: as good as new (ex-display), Year of construction: 2026, Low-noise and slow-speed model WL 4/18.5 kW Technical data: Hopper opening: 600 x 800 mm Hopper opening with log spacer: 600 x 1050 mm Hopper capacity: approx. 0.6 m³ Working width of the rotor: 600 mm Lredpjbunq Hsfx Akmsu Diameter of the rotor: 252 mm Number of knives: 28 pieces Knives: 40 x 40 mm, concave Screen hole size: 15/20 mm Included: Control cabinet Electrical control system Star-delta starter Rubber vibration dampers 2nd knife row Log spacer (free-cutting hopper) Location: 54634 Bitburg Available immediately

Condition: used, first registration: 07/2013, loading space length: 7,250 mm, total width: 2,550 mm, * WECON BDF container chassis WSK 745 NG, length 7.45m, with portal doors * Please schedule an appointment for a viewing. Lrsdpfx Akjzfd Sremou * Contact person: Mr. Andreas Vogel * The information provided online is a non-binding description. * It does not constitute a guarantee of any specific characteristics. * The seller is not liable for typographical or data transmission errors. * Subject to changes, errors and prior sale.

Condition: new, Year of construction: 2026, The Hebrock F 5 If you want maximum performance, the Hebrock F 5 is the solution for edgebanding in demanding workshops. The F 5 guarantees edge processing in all steps, as it is equipped with all the components you need for your requirements: jointing cutter, miter saw, milling unit, radius pull blade, corner cutter, surface pull blade, and finishing station. For even more flexibility on the way to the perfect finish, the F 5 can optionally be equipped with a practical multi-radius pull blade. Maximum edge thickness: 3 mm Maximum workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: Hebrock F5 Next - 10 m/min Edgebanding machine F5 Next With PLC control (including touchscreen) and with hot melt adhesive application to the workpiece for edge material up to 3 mm; jointing cutter (including diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with interchangeable tank preparation including glue dispensing device, HF miter saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable plate cutter (combination design), corner rounding cutter, radius pull blade, surface pull blade (including pneumatic feed), finishing station, robust chain drive, ball-bearing double roller pressure, viewing window from the back of the machine, pull-out workpiece support, feed rate approx. 10 m/min. Hebrock F5 F5/08/4 Quick-change preparation for corner cutter F5/08/5 additional interchangeable motor for corner cutter with tool set F5/09/4 Multi-radius pull blade (R1/R2) F5/10 Chassis F5/14 additional interchangeable tank F5/24/1 Spray device for release agent F5/24/2 Spray device for cleaning agent F5/25 Spray device for edge F5/27 Nesting for cutter and radius pull blade Lrsdslht Hwjpfx Akmsu F6/28 Spray texture finish F5/30 Pneumatic 3-point adjustment (radius, bevel, flush milling) F5/31 Jointing up to 50 mm F5/32 LED lighting Location: In stock, 54634 Bitburg - available immediately -

Condition: ready for operation (used), Working width 410 mm Length of the planing table 1450 mm Number of knives 4 St. Motor output 4 kW Dimensions (L/W/H) 2650x850x1100 mm weight of the machine ca. 750 kg SCM Surface planer F 410 N ----- Technical manufacturer's description: Planing width: 410 mm Total table length: 2600 mm Table height: 855 mm Feed table length: 1450 mm Ljdpfx Akewzmu Demsru Aluminum planing fence swivels up to 45° Planing fence dimensions: 1100 x 170 mm 4-knife planing shaft diameter: 120 mm Knife shaft speed: 5000 rpm Motor power: 4 kW TERSA monobloc one-way reversible cutterhead SCM dressing protection device integrated in machine stand 120 mm diameter extraction nozzle Manual star-delta switch Motor protection switch, undervoltage release Lockable main switch Automatic motor brake Pivoting auxiliary fence ----- Price of the above machine on request! ----- (technical data according to manufacturer - without guarantee!) All prices quoted are net and subject to VAT.

Condition: used, functionality: fully functional, USED ELECTRONIC WHEEL BALANCER, CEMB ZE 100/TC. Lrsdpezh Ehyefx Akmju

Condition: new, Year of construction: 2026, Weima Single-Rotor Shredder Type WL 6 Power: 18.5 kW Our WL 6 Machine Concept The Weima high-performance shredders, with their flexible application options, can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer remnants, etc.) into fuel chips, achieving an enormous volume reduction of the material, especially with bulky materials. Operating principle: The machine is equipped with a large feed hopper and can be fed by means of a conveyor belt or manually. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without the need for manual assistance. Technical Specifications WL 6 / 18.5 kW Hopper opening: 800 x 1,000 mm Hopper capacity: 0.9 m³ Working width of the rotor: 800 mm Diameter of the rotor: 252 mm Drive power: 18.5 kW Rotor speed: 80 - 120 rpm Number of knives: 42 pieces Type and size of knives: concave / 40 x 40 mm, cutting reversible edges Screen size: 10-60 mm possible (standard 15-20 mm) Paint: WEIMA standard RAL 2002 / 7016 Connection value: 400 V +/- 5% / 50 Hz Weight: approx. 1,600 kg Lodpfx Aeh Hnp Djkmjru Included: - Control cabinet (Rittal) incl. electrical control (Moeller / Siemens) and star-delta starter - Rubber vibration dampers - V-rotor (patented) with knife pockets milled into the profile - Gearbox end switch - Pressing bar - Very robust Weima WAP gearbox - Log spacer (self-cleaning hopper) - 2nd knife row Available from stock in 54634 Bitburg - immediately available -