Used Dmg Dmu 50 M for sale (84,824)

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 5,600 kg, maximum load weight: 33,400 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 9,200 mm, loading space width: 2,420 mm, loading space height: 2,150 mm, loading space volume: 50 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 4,040 mm, suspension: air, tire size: 385/65 R 22,5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Further Information Chassis, Saddle, and Tipper Fine-grain steel welded construction, in basic lightweight design, saddle plate with interchangeable 2 kingpins Curved front end, patented 24 ton, 2-speed landing gear, single-sided operation, with straight lower part, without thrust compensation 2 support wedges with holder Underrun protection, foldable Half-shell fenders Integrated fender holder, surface designed to repel stones With anti-spray flaps, only on the last axle 1 tarpaulin rod with bracket 2 towing hooks at the rear Axles + Suspension BPW disc brake axles with 430 mm disc diameter Axle/chassis laser-measured to reduce tire wear and fuel consumption Air suspension 1st axle: automatic lift axle, including forced lowering and starting assist Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking System 2-line compressed air braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! With lifting and lowering valve Vehicle - Driving Stability System Wheels and Tires 385/65 R22.5, manufacturer's choice Steel rims, factory silver "TPMS" tire pressure monitoring system according to ECE R 141, display via display in the towing vehicle, via EBS, without truck installation (this must be available in the truck. Only on base tires). Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides Yellow LED lighting on the sides coupled with the turn signal "Flashing side lights" 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw fitting, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck auxiliary drive Dump Body Aluminum box dump body made of high-quality, abrasion-resistant material, front wall 5 mm thick, with external side walls made of 30 mm hollow chamber profiles, cleanly welded, with top edge profile to prevent spillage. Inside with ladder on the front wall (not in conjunction with Cramaro). Shovel and broom holder on the outside on the front wall. Greenline - conical and aerodynamic dump body shape Membrane - rear wall Rear wall with oscillating mounting with double-joint hinge and with 2-part door division 1/2 to 1/2, at the top with pivoting gantry, with one grain slide per door. Rear wall with rubber seal. Note! Heat resistant up to max. 170°C! Floor continuously 6 mm thick Standing platform with ladder, connecting plate for air/electricity and brake with large space for optimal operation. Roll cover, single-sided, for placement on the right side, with central locking on the left side Country of Registration / Signs Germany Type approval according to EC 2007/46 Iaodpfx Anoi Ri Ihevsu 24/7 service hotline Prepared for license plate holder, single-row Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paint Finish Frame DB 7350 Novagrau "10-year warranty against rust-through"

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 6,750 kg, maximum load weight: 32,250 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 9,950 mm, loading space width: 2,480 mm, loading space height: 2,150 mm, loading space volume: 50 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 3,670 mm, suspension: air, tire size: 385/65 R 22,5, tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. More information Chassis, saddle, tipper Fine-grain steel welded construction, in basic lightweight design, saddle plate with interchangeable 2 king pin Curved front end, patented 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without stroke compensation Wheel chocks with holder Rear underrun protection, foldable Half-shell fenders Integrated fender holder, surface resistant to stone chipping Tarp pole with holder Towing hook at the rear Axles + Suspension BPW disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned, reduces tire wear and fuel consumption Air suspension 1st axle, automatic lift axle, including forced lowering and start-up assistance Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring brake parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! With lift and lower valve Vehicle - Driving stability system Wheels and tires 385/65 R22.5 Steel rims, factory silver "TPMS" tire pressure monitoring system according to ECE R 141, display via the towing vehicle's display, via EBS, without installation in the truck (this must be a prerequisite in the truck. Only on standard tires). Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides Yellow LED lighting on the sides, coupled with the turn signal ("Flashing side lights") 2 x 7-pole non-interchangeable sockets at the front, without connecting cable Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard-chromed, with HDK screw connection, fixed part, NW 48 mm (without hose connection) Iajdpfei Rizfsx Anvou Actuation hydraulically via truck auxiliary drive Body Steel side body made of high-wear-resistant HB 400 steel, sloping front wall with externally mounted hydraulic cylinder mounting. Shovel and broom holder on the outside of the front wall. Interior with ladder on the front wall. Side walls continuously 3 mm thick, floor continuously 3 mm thick Membrane - rear wall Interior width at the bottom approx. 1440 mm Aluminum rear wall, pendulum-mounted with "double-hinge hinge" and with a 2-flap door, split 1/2 to 1/2, with a pivoting bar at the top, with one grain slide per door. Standing platform with ladder, connection plate for air/electrical and brake with large space for the best possible operability. Rollover tarp on one side for placement on the right, with central locking on the left Country of approval/signs Germany Type approval according to EG 2007/46 Superstructure strength according to EN 12642 24/7 service hotline Prepared for single-row license plate holder Warning sign according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paint Frame DB 7350 Novagrau "10-year warranty against rust-through" Body RAL color, solid color Rollover tarp RAL 7035 light gray

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 7,900 kg, maximum load weight: 31,100 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space width: 2,330 mm, loading space height: 1,950 mm, loading space volume: 50 m³, total length: 11,200 mm, total width: 2,550 mm, total height: 3,470 mm, suspension: air, tire size: 385/65 R 22,5, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements. More information Chassis, semi-trailer, tipper Fine-grain steel welded construction, lightweight design, with slight curvature, kingpin plate with replaceable 2" kingpin 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without shock absorption Wheel chocks with holder Underrun protection, foldable Half-shell fenders Integrated fender holder, surface resistant to stone chipping Tarpaulin rod with holder Towing hook at the rear Axles + Suspension BPW disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned, reducing tire wear and fuel consumption Air suspension 1st axle: automatic lift axle, including forced lowering and starting aid Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking system 2-line compressed air braking system, color-coded lines for easy maintenance Spring-loaded parking brake 2 tamper-proof coupling heads at the front, without connection line EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! with lifting and lowering valve Vehicle - Driving stability system Wheels and tires 385/65 R22.5 Steel rims, factory silver "TPMS" tire pressure monitoring system according to ECE R 141, display via display in the tractor unit, via EBS, without truck installation (this must be available in the truck. Only for standard tires). Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the side Yellow LED lighting on the side, linked to the turn signal "Flashing side lights" 2 white position lights at the front 2 white/red side marker lights at the rear Iodpei Rizqofx Anvjau 2 x 7-pole tamper-proof sockets at the front, without connection cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard chrome-plated, with HDK screw connection, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck auxiliary drive Body Steel side body made of high-wear-resistant HB 400 steel, sloping front wall with external hydraulic cylinder mount. Foldable aluminum splash guard on the right for the tarpaulin. Shovel and broom holder on the outside of the front wall. Inside with ladder on the front wall. Side walls continuously 4 mm thick, floor continuously 5 mm thick Membrane - Rear wall Rear wall with 2-wing door division 1/2 to 1/2, with 1 slide in the right wing. With externally mounted torsion bar lock and mechanical locking at the bottom. Standing platform with ladder, connection plate for air/electricity and brake with ample space for best possible operation. Roll cover on one side for depositing on the right, with central locking on the left Country of registration / Signs Germany Type approval according to EC 2007/46 Body strength according to EN 12642 24/7 service hotline prepared for single-row license plate holder Warning sign according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paint Frame DB 7350 Novagrau 10-year warranty against rust-through Support feet, black coated Body, RAL color of your choice, solid color Roll cover, RAL 7035 light gray

Condition: ready for operation (used), Year of construction: 2000, Immediately available from CH Werkzeugbau: 5-axis milling machine Deckel Maho Type DMU 35 M Year of manufacture 2000 CNC control Heidenhain TNC 310 M Electronic handwheel Table 400 x 280 mm Iaodpfx Anezd N Txjvou Table load up to 100 kg Travel ranges X/Y/Z 350/240/340 mm Spindle speeds, continuously variable 0 – 5000 rpm Tool holder SK 40 Rapid traverse 5 m/min Servomotors for X/Y and Z axes Rotary range 360 degrees Table tilting +105 / -150 degrees Weight 2 tons Tool holders, hydraulic vice Price: Euro 4,000.00 plus VAT, ex works.

Condition: used, Year of construction: 2025, load capacity: 5,000 kg, lifting height: 3,980 mm, Bedienertyp Sitzen · Max. Tragkraft 5000 kg · Lastschwerpunkt 600 mm · Lastabstand, Mitte der Antriebsachse bis zur Gabel 773 mm · Vorderachslast (beladen) / Hinterachslast (beladen) 11520 kg / 1805 kg · Vorderachslast ohne Last / Hinterachslast ohne Last 3285 kg / 5040 kg · Bereifung Pneumatisch · Anzahl der Vorderräder / Hinterräder 2 / 2 · Anzahl der Antriebsräder 4 · Vorderspur 1620 mm · Abstand zwischen den Hinterrädern 1740 mm · Höhe Schutzdach (Kabine) / Gesamthöhe mit niedrigem Fahrerschutzdach (Buggie-Ausführung) 2486 mm / 2486 mm · Sitzhöhe 1455 mm · Gabelträger DIN 15173 A/B 4A · Gangbreite für Palette 1000 x 1200 quer 6812 mm · Gangbreite für Palette 800 x 1200 längs 6812 mm · Wenderadius 4640 mm · Fahrgeschwindigkeit (beladen / unbeladen) 10 km/h / 22 km/h · Hubgeschwindigkeit (beladen / unbeladen) 0.40 m/s / 0.40 m/s · Absenkgeschwindigkeit (beladen / unbeladen) 0.50 m/s / 0.40 m/s · Festellbremse Hydraulik · Nennleistung Verbrennungsmotor 55 kW · Hersteller / Motor Modell / Motornorm Deutz / TCD 2,9 / Stage V · Nenndrehzahl 2300 rpm · Anzahl der Zylinder / Tragfähigkeit der Zylinder 4 - 2925 cm³ · Arbeitsdruck Zusatzsteuerkreis für Anbaugeräte 230 bar · Ölmenge für Anbaugerät 97 l/min Iodpfxsy E Uhgo Anveau · Geräuschpegel am Ohr des Fahrers gemäß DIN 12 053: 78 dB

Condition: used, Year of construction: 2016, functionality: fully functional, Shipping Line/Roller Conveyor System/Conveyor System, Conveyor Technology approx. 50 meters Manufacturer: RBS-Förderanlagen GmbH Model: Shipping Line Condition: Used Year of Manufacture: 2016 The system consists of: 1 x Inclined Belt Conveyor approx. 3.2 meters in length 2 x Pneumatic Lifts 3 x 90° Curves 2 x Flap/Passage Elements 1 x Control Cabinet 25 height-adjustable feet and the remaining conveyor line/roller conveyor approx. 40 meters Total length: approx. 50,000 mm Total width: 750 mm Conveying width: approx. 680 mm Roller diameter: 50 mm Internal article number: 2025120101 Features: Iasdpfx Anex Ala Esvou Condition: fully functional, with signs of use Ideal for fast material handling Professionally dismantled and packaged Pick-up address: Industriestraße 5 (47918 Tönisvorst) The conveyor system was fully operational up to its dismantling. Thanks to the superior workmanship of the conveyor technology, your materials glide smoothly to their destination, even under heavy loads. Customized solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods! We are happy to provide a tailored offer or consult you on design or installation queries. Simply let us know your requirements and local conditions. Benefit from our many years of experience and our excellent network of experts. We have successfully delivered projects for companies in various industries such as logistics, the pharmaceutical industry, trades, or the electronics sector. Together, we will develop solutions to optimize your processes and material flow efficiently and sustainably. We can also offer fully automated sorting technology and complementary components like picking shelves or containers.

Condition: used, maximum load weight: 29,660 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 09/2006, next inspection (TÜV): 12/2025, loading space length: 9,200 mm, loading space volume: 50 m³, total width: 2,550 mm, total height: 3,700 mm, Equipment: ABS, Benalu Landliner 50 m³ Tailgate with locking mechanism Roof roll tarp Support leg Reversing lights Iedpfxex Inhle Anveau Loading pressure gauge Storage box Tipper body has been professionally repaired Tyres 385/65 R 22.5 Further information on request

Condition: used, maximum load weight: 33,080 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2019, next inspection (TÜV): 11/2026, loading space volume: 50 m³, Year of construction: 2019, Equipment: ABS, Bulkliner S 95 Vehicle data: * Manufacturer: Benalu * Type: 95 Bulkliner S * Vehicle type: Tipper * Combination door with grain discharge chutes * First registration: 01/02/2019 * 3 axles with disc brakes Iodpfx Aozcidcenvjau * Lifting axle * Permissible total weight: 39,000 kg * Unladen weight: 5,920 kg * Payload: 33,080 kg * Tires: 385/65 R22.5 * Electric cover

Condition: used, maximum load weight: 30,240 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 08/2017, next inspection (TÜV): 12/2025, total width: 2,550 mm, total height: 3,900 mm, Equipment: ABS, Kempf SKM aluminum tipping trough * BPW axles with air suspension and disc brakes * 1st axle can be lifted * Tires 385/65R22.5 * Air suspension raise/lower * Spare wheel holder * Work lights * Roll-up roof tarpaulin * Work platform with access * Aluminum drop supports * Brake pads on second and third axle replaced * Six air suspension bellows replaced * New TÜV approval We are happy to provide you with further information Iaedpfxevpa Nlj Anvou

Condition: new, maximum load weight: 30,120 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,720 mm, loading space width: 2,410 mm, loading space height: 2,200 mm, loading space volume: 51 m³, total width: 2,550 mm, total height: 3,800 mm, Year of construction: 2026, Equipment: ABS, Light BENALU SANH tipper * Aluminium chassis * Aluminium body Iasdpfx Aexc Ad Ujnvju * Pendulum tailgate, without grain slider, mud-tight * Pneumatic tailgate locking * SAF axles * 1st axle as SAF lift axle * Air suspension * Smartboard * Rotary slide valve * 4 LED additional spotlights * Gear support winches * Plastic toolbox * Superstructure painted in RAL 9006 * Unpainted chassis

Condition: used, maximum load weight: 28,360 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 12/2021, loading space volume: 57 m³, total width: 2,550 mm, total height: 3,900 mm, Equipment: ABS, D-Tec FL-3-S Steel Tipper 57 m³ Iajdpfsyzvf Ejx Anvou - Cargo area length: 11,516 mm - Height: 3,900 mm - Width: 2,550 mm - Permissible total weight: 36,000 kg - Unladen weight: 7,640 kg - SAF axles with disc brakes - 385/65 R22.5 - ABS - Alloy rims - Aluminium landing legs - Air suspension - Wheel chocks - 1st axle is a lift axle - Open side underrun protection - Grain chute - A-board - Plastic toolbox - Platform - Roll tarp 680 g/m2 - 5x tarp holders - Multi-chamber lights (standard) - 4x work lights - LED marking lights, flashing - Acoustic reversing warning device For further information, we are happy to assist you.

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 09/2013, next inspection (TÜV): 10/2026, Year of construction: 2013, Equipment: ABS, Equipment: Air suspension Iajdpfozbn I Rex Anvou Safety: ABS * EBS

Condition: used, Year of construction: 2007, machine/vehicle number: 001669, Lg 33121 Single side decoiler ARKU AH 3000/ST-M year of manufacture 1995 belt width max. 600 mm load capacity max. 3.000 kg Iaedpohigmbefx Anvou coil outer diameter max. 1.800 mm Spreading hydraulic Pressing arm hydraulic Decoiler with auxiliary drive and brake coiler chair fixed + reel traversing device with: Lg 33221 High performance belt leveler LORENZ BRM 50/620.9 year of manufacture 2007 Machine no. 001669 passage width max. 620 mm number of straightening rolls 9 Straightening roll diameter 50 mm Material density 0.7 to 6.0 mm Straightening rolls supported several times against deflection All rolls driven by transfer gearboxes and cardan shafts. cardan shafts. Used, in as-is condition from stock, available immediately. On request with overhaul. Delivery time by agreement. Further data shortly or on request.

Condition: used, Year of construction: 1980, bore capacity in steel (diameter) 50 mm arm length 1250 mm distance spindle/base plate 1350 mm bore capacity in cast iron 60 mm spindle taper MK 5 spindle turning speed range 12,5 - 1000 U/min feeds 0,06 - 0,5 mm/U crossrail adjustment vertical 620 mm Iodpfx Aovh Nbzsnvsau column diameter 350 mm total power requirement 7,7 kW weight of the machine ca. 4,6 t dimensions of machine L x W x H 2,53 x 1,15 x 2,82 m Accessories: swivelling box table, coolant - additional column guide at the end of arm -

Condition: used, Year of construction: 1970, bore capacity in steel (diameter) 50 mm Iedevh Nbhspfx Anvoau arm length 1250 mm workpiece height max. ca. 1150 mm bore capacity in cast iron 60 mm spindle taper MK 5 spindle turning speed range 25 - 2000 U/min feeds 0,06 - 0,5 mm/U crossrail adjustment vertical 620 mm column diameter 350 mm total power requirement 7,5 kW weight of the machine ca. 4,6 t dimensions of machine L x W x H 2,50 x 1,08 x 2,50 m Accessories: box table 1100 x 700 x 550 mm, coolant pump

Condition: good (used), Year of construction: 2001, functionality: unexamined, travel distance X-axis: 350 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 340 mm, rapid traverse X-axis: 20 m/min, controller model: Siemens Sinumerik 840 D, total height: 2,100 mm, total length: 3,800 mm, total width: 3,600 mm, table load: 100 kg, rotational speed (max.): 15,000 rpm, overall weight: 1,600 kg, For sale is a 5-axis machining center from DMG, model DMU 35 M, equipped with two manual axes. The machine is in good condition. Technical specifications: DMU 35 M Year of manufacture: 2001 X-axis: 350 mm Iasdpfx Aey Nz Nrjnvju Y-axis: 240 mm Z-axis: 340 mm Spindle speed: 15,000 rpm Feed rate: Infinitely variable up to 5,000 mm/min Rapid traverse: 20 m/min Clamping surface: Ø 400 x 280 mm Rotary range: 360° (mechanical) Table clamping: +105 / -150 (mechanical) Max. table load: 100 kg Tool holder: SK 40 Tool clamping: pneumatic/mechanical Required space: 3,800 x 3,600 x 2,100 mm Transport dimensions: approx. 2,000 x 1,700 x 2,100 mm Weight: 1,600 kg Transport and loading can be arranged for an additional charge, Europe-wide. All prices are subject to VAT. Inspection by appointment is possible. Contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase and sales BUYING / SELLING OF PRODUCTION & METALWORKING MACHINERY AND MORE. Are you looking for a high-quality but affordable metalworking machine for your production? Or do you want to sell your machine? For further information or contact options, please visit our website.

Condition: like new (used), 15 running meters tire rack Nedcon New & used, see pictures. Height 3 m Depth 50 cm Beam length 3.7 m Beam with load/shelf 1000 kg Frame blue Beam painted blue Negotiable price: € 1.150,-- net ex stock Offer consists of: + 4 pcs. frames pre-assembled, depth 50 cm, height 3 m + 18 pcs. beams, length 3,7 m, 1000 kg load/slot + 36 pcs. suspension locks + 16 pcs. concrete anchors Goods are in stock. Transport and assembly possible on request. Inspection possible at any time by arrangement. More info on request. Iasdpokkch Esfx Anveu Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for, or offer numerous items from various areas broom-clean business clearances company liquidations Fast- flexible - ready to hit! We also clear and dispose for liquidators. Write us with some keywords, we will contact you immediately. To get to our site, please click on our logo!

Condition: refurbished (used), Year of construction: 2010, machine/vehicle number: R-00596, load capacity: 50 kg, arm reach: 2,050 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C302#EGN, Refurbished FANUC M-710iC/50 manufactured in 2010.03. The robot comes with an R-30iA B-Size controller including iPendant. Iedsy I Rraopfx Anvoau   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-710iC/50 Model Number: A05B-1125-B201 Year of Manufacture Robot: 2010.03 Warranty term (months): 12   Payload (kg): 50 Reach (mm): 2050 Repeatability (mm): ± 0.03 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 560   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2010.02 RCC Length (m): 7   Teach Pendant: A05B-2518-C302#EGN Teach Pendant Cable Length (m): 12

Condition: used, Year of construction: 2020, operating hours: 2,040 h, fuel type: diesel, power: 55 kW (74.78 HP), Rental currency: EUR Please contact KEY-TEC Sales for more information Iodpfey I Iwgsx Anvsau

Condition: used, Year of construction: 2019, operating hours: 2,700 h, lifting height: 3,700 mm, fuel type: diesel, power: 55 kW (74.78 HP), Empty weight: 8.056 kg Lifting capacity: 5.000 kg Rental currency: EUR Production country: FR Iasdoy I Iw Hopfx Anveu Please contact KEY-TEC Sales for more information

Condition: used, Year of construction: 2021, operating hours: 1,940 h, fuel type: diesel, power: 55 kW (74.78 HP), Empty weight: 8.056 kg Iedpfx Anjxdhf Hsvjau Lifting capacity: 5.000 kg Rental currency: EUR Please contact KEY-TEC Sales for more information

Condition: used, Year of construction: 2023, operating hours: 885 h, lifting height: 3,700 mm, fuel type: diesel, power: 55 kW (74.78 HP), Empty weight: 8.056 kg Lifting capacity: 5.000 kg Isdpfx Anjx I U I Sjvjau Rental currency: EUR Please contact KEY-TEC Sales for more information

Condition: used, Year of construction: 2024, operating hours: 1,445 h, fuel type: diesel, mast type: duplex, Rental currency: EUR Ijdpfx Aoy I Iwmsnvoau Please contact KEY-TEC Sales for more information

Condition: used, Year of construction: 2024, operating hours: 870 h, fuel type: diesel, Rental currency: EUR Iodpfxoy I Iwye Anvsau Please contact KEY-TEC Sales for more information

Condition: used, Year of construction: 2024, operating hours: 650 h, fuel type: diesel, Rental currency: EUR Please contact KEY-TEC Sales for more information Isdpfey I Iwtsx Anvoau