Used Faccin Three Rolls Angle Roll W=720 Cm³ for sale (49,574)

Year of construction: 2018, condition: like new (used), Interroll 113S drum motor 800mm drive roller, 0.18Kw, 24m/min more pieces Manufacturer: Interroll Type: 113S Roller width: 800 mm Axle length: 800 mm + 2x 30 mm axle stub Cylinder diameter: 120 mm Flat width: 20 x 35 mm Bedpfxema Rtao Adgsdc Nominal speed: vN 0.56 m/s voltage: 400v 50Hz 0.62A Nominal speed: 0.4 m/s Housing material: stainless steel Protection: IP66 Weight: approx. 15.3 kg

Condition: new, machine/vehicle number: 087c7b6bc0c6118a84279fb46, empty load weight: 4,100 kg, Further information Frame Welded steel construction made of fine-grained steel, hot-dip galvanized, flat plateau without raised edges, Loading area slanted downwards by approx. 8° after the rear axle. Side members made of steel profiles, Hot-dip galvanized steel frame, with stainless steel plate at the kink as cable guide - flush with the floor. For trucks with Wheelbase: 2nd axle 5,100 mm / 2nd to 3rd axle 1350 mm Trailer coupling Towing hitch ball head D24.8: (height from floor to top edge approx. 480 mm), towing capacity 2,800 kg, incl. assembly and electrics with 7-pin socket Accessories/conversions 2 holders for wheel chocks, aluminum side bumpers, foldable - are taken from the truck! Steel underride guard, quarter-shell mudguards with mud flaps - will be taken from the truck! Storage box Plastic tool box, with drawer and shelf, w=650 Incl. / h=520 / d=670 mm, lockable with a padlock (lock not included). not included) 1 holder for 3 pcs. petrol cans 1 stainless steel storage box, w=600/h=400/t=500 mm, with polished door, incl. lockable, includes control valve. lockable, includes control valve and electro-hydraulic pump unit. pump unit. Control box with circumferential door seal and sealing sleeves on the back (splash-proof according to techn. Bdedpfx Adji Riytsgec technical possibility) Electrics Adaptation of the existing rear lights, 2 additional LED work lights, recessed in the bulkhead recessed switched via parking light with switch on front wall outside in FR-left, 1 LED work light, at the rear, with integrated reversing camera Incl. with color flat screen monitor, screen with suction cup mount and power supply via 24 volts, Voltage divider 24/12V, 1 socket 7-pin 12V = plug-in adapter Base Mega Grip made of toothed galvanized grating, steel grating 50/4 Incl. with mesh width 50 mm. Top side with anti-slip serration, laid continuously over the entire main frame plateau Lashing eyes 12 pairs of lashing rings suspended freely pivoting in the outer frame - 10 tons each. 1 x at the front and the last one at the rear. 1 piece Lashing eyelet at the very rear in the center for fastening the winch cable 12 lashing eyes centrally embedded in the floor, 5 tons each, (not included in Incl. rear sloping) Front wall Sheet steel bulkhead, height 1,500 mm. Fixed with corner pillars at front wall height. In each case 2 x 12 pcs. Suspension brackets for lashing chains mounted on the left and right of the front wall Cable winch Electric cable winch, 24 volt, pulling force approx. 6350 kg, mounted in the center of the bulkhead (recessed with loading bridge), operation with radio remote control, cable length min. 35 m x 9.5 mm, with roller rope window, with cable pressure plate, incl. overload protection, cable freewheel clutch, manual switch with approx. 5 m control lever, acceptance of the cable winch, civil engineer test report, test book, operating instructions Drive-on ramps Length 3,500 mm - 2-part (2,000 mm + 1,500 mm), width 850 mm, load capacity 20,000 kg / pair (also for ramp loading), electric for ramp loading), electro-hydraulically foldable and laterally movable - incl. Electro-hydraulic pump unit. Drive-on angle approx. 8° with lowered rear axle Ramp support made of hot-dip galvanized steel grating (like the floor of the loading bridge), with with anti-skid toothing. Ramps can be pushed together to approx. 170 mm, Hydraulic ramp extension. Ramp prepared for operation on loading ramp with full load capacity. Ramp locking with 2 tension belts. Ramp tip offs

Condition: new, machine/vehicle number: c78894767223a51dd199030f3, empty load weight: 4,600 kg, Further information Frame Welded steel construction made of fine-grained steel, hot-dip galvanized, flat plateau without raised edges, Loading area slanted downwards by approx. 8° after the rear axle. Side members made of steel profiles, Hot-dip galvanized steel frame, with stainless steel plate at the kink as cable guide - flush with the floor. For trucks with Wheelbase: 2nd axle 1,795 mm / 2nd to 3rd axle 4105 mm and 3rd to 4th axle 1350 mm Trailer coupling Towing hitch ball head D24.8: (height from floor to top edge approx. 480 mm), towing capacity 2,800 kg, incl. assembly and electrics with 7-pin socket Accessories/conversions 2 holders for wheel chocks, aluminum side bumpers, foldable - are taken from the truck! Steel underride guard, quarter-shell mudguards with mud flaps - will be taken from the truck! Storage box Plastic tool box, with drawer and shelf, w=650 Incl. / h=520 / d=670 mm, lockable with a padlock (lock not included). not included) 1 holder for 3 pcs. petrol cans 1 stainless steel storage box, w=600/h=400/t=500 mm, with polished door, incl. lockable, includes control valve. lockable, includes control valve and electro-hydraulic pump unit. pump unit. Control box with circumferential door seal and sealing sleeves on the back (splash-proof according to techn. technical possibility) Electrics Adaptation of the existing rear lights, 2 additional LED work lights, recessed in the bulkhead recessed switched via parking light with switch on front wall outside in FR-left, 1 LED work light, at the rear, with integrated reversing camera Incl. with color flat screen monitor, screen with suction cup mount and power supply via 24 volts, Voltage divider 24/12V, 1 socket 7-pin 12V = plug-in adapter Base Bjdpfx Adek Unitsgedc Mega Grip made of toothed galvanized grating, steel grating 50/4 Incl. with mesh width 50 mm. Top side with anti-slip serration, laid continuously over the entire main frame plateau Lashing eyes 12 pairs of lashing rings suspended freely pivoting in the outer frame - 10 tons each. 1 x at the front and the last one at the rear. 1 piece Lashing eyelet at the very rear in the middle for fastening the winch cable 12 lashing eyes centrally embedded in the floor, each 5 to. (not included in Inkl. rear slope) Front wall Sheet steel bulkhead, height 1,500 mm. Fixed with corner pillars at front wall height. Each with 2 x 12 pcs. Suspension brackets for lashing chains mounted on the left and right of the front wall Cable winch Electric cable winch, 24 volt, pulling force approx. 6350 kg, mounted in the center of the bulkhead (recessed with loading bridge), operation with radio remote control, cable length min. 35 m x 9.5 mm, with roller rope window, with cable pressure plate, incl. overload protection, cable freewheel clutch, manual switch with approx. 5 m control lever, acceptance of the cable winch, civil engineer test report, test book, operating instructions Drive-on ramps Length 3,500 mm - 2-part (2,000 mm + 1,500 mm), width 850 mm, load capacity 20,000 kg / pair (also for ramp loading), electric for ramp loading), electro-hydraulically foldable and laterally movable - incl. Electro-hydraulic pump unit. Drive-on angle approx. 8° with lowered rear axle Ramp support made of hot-dip galvanized steel grating (like the floor of the loading bridge), with with anti-skid toothing. Ramps can be pushed together to approx. 170 mm, Hydraulic ramp extension. Ramp prepared for operation on loading ramp with full load capacity. Ramp locking with 2 tension

Condition: excellent (used), Viessmann Vitoplex 300/720 kW/low-temperature/heating boiler/available with oil or gas burner upon request Bedpfx Adoxv Exbjgodc

Year of construction: 2010, condition: excellent (used), Interroll roller conveyor 1,65m with drive The Interroll roller conveyor is in a very good condition. Furthermore, the roller conveyor has its own drive motor Series: 5600 width: 410mm length: 1650mm Pitch: 75mm Bodpehvmniefx Adgsdc Load capacity: 200kg per meter Drive voltage: 400Volt Complete factory lock, wide range of storage platforms, pallet racks, shelf racks, paternosters. High quality industrial machines, lathes, grinding machines, hand machines More articles - new and used - you can find in our store! International shipping costs on request!

Condition: reconditioned (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 12-562, overall weight: 900 kg, workpiece diameter (max.): 40 mm, spindle diameter: 54 mm, type of input current: three-phase, roll diameter: 150 mm, spindle speed (max.): 80 rpm, spindle speed (min.): 10 rpm, total height: 2,150 mm, total length: 1,200 mm, total width: 800 mm, roll width: 80 mm, year of last overhaul: 2026, Equipment: documentation/manual, We offer this factory-refurbished thread rolling machine RWT 12X FR, year of manufacture 2013. Directly from the manufacturer! Machine type: RWT 12X FR Rolling force: 12 t Power: 5.5 kW Year of manufacture: 2013 PLC: Siemens S7-313c HMI: Siemens OP7 Frequency inverter: Siemens Micromaster 440 Speed: 10–80 rpm, stepless adjustment Max. tool width: 80 mm Rolling spindle diameter: 54 mm Rolling die diameter: max. 150 mm Suitable for plunge and through-feed rolling. Condition: very good, used, workshop-refurbished by the manufacturer If you have any questions or need further information, please write us a message or call us. Bdjdpfxjydkb Se Adgoc

Condition: excellent (used), Year of construction: 2017, Ref: 11039 . 2017 Rollem 36” Jetslit + 30” Rollaway and Cassette AutoCollator Delivery High volume print finishing system to maximizes finishing productivity for large volume producers For greeting cards, photo books, direct mail, postcards, invoices, business cards, game cards and much more. Features: This flexible system takes full press sheets and converts them to finished products in one step, eliminating the need for guillotine cutting, excess manpower and paper movement. 100% accuracy of finished products is a key feature of the Jetslit. Performs multiple print finishing steps with one system Bi-directional slitting, cutting, creasing and perforating in one machine Ideal for high volume production Multiple-up layouts maximize press sheet Decreases excess labour costs Eliminates touch points and paper movement Fully integrates with press via DFA communication system Accepts sheets in-line from press or operates in a stand-alone near-line configuration Process: The system takes full printed sheets with multiple images and converts each sheet in two directions, as shown below: Bedpfxjxyxtte Adgsdc 1. Full sheets are fed into the JetSlit registration guide for perfect alignment. 2. The sheets are completely slit on the extreme edges and timed slit in-between with Rollem's patented strike-slit feature. 3. The sheets are turned 90 degrees and re-registered. 4. Final slits are made, removing the notched portions and leaving the final pieces. Specification: Speed: Up to 6,000 cut product sheets per hour Format: Up to 36’’ (915mm)

Condition: excellent (used), Year of construction: 2017, Ref: 11038 . 2017 Rollem 36” Jetslit + 30” Rollaway and Cassette Delivery High volume print finishing system to maximizes finishing productivity for large volume producers For greeting cards, photo books, direct mail, postcards, invoices, business cards, game cards and much more. Features: This flexible system takes full press sheets and converts them to finished products in one step, eliminating the need for guillotine cutting, excess manpower and paper movement. 100% accuracy of finished products is a key feature of the Jetslit. Performs multiple print finishing steps with one system Bi-directional slitting, cutting, creasing and perforating in one machine Ideal for high volume production Multiple-up layouts maximize press sheet Decreases excess labour costs Eliminates touch points and paper movement Fully integrates with press via DFA communication system Accepts sheets in-line from press or operates in a stand-alone near-line configuration Process: The system takes full printed sheets with multiple images and converts each sheet in two directions, as shown below: 1. Full sheets are fed into the JetSlit registration guide for perfect alignment. 2. The sheets are completely slit on the extreme edges and timed slit in-between with Rollem's patented strike-slit feature. 3. The sheets are turned 90 degrees and re-registered. 4. Final slits are made, removing the notched portions and leaving the final pieces. Specification: Speed: Up to 6,000 cut product sheets per hour Bedpfsxyxr Njx Adgsdc Format: Up to 36’’ (915mm)

Condition: excellent (used), workpiece diameter (max.): 30 mm, spindle diameter: 54 mm, roll diameter: 125 mm, spindle speed (max.): 224 rpm, spindle speed (min.): 40 rpm, roll width: 70 mm, Excellent Used Profiroll Bad Duben Model UPWS 10 ton Hydraulic Thread Rolling Machine with swivelling spindle for in-feed and thru-feed rolling Bdjdjymlx Djpfx Adgoc Max rolling diameter: 30mm - Max thread length infeed rolling: 70mm - Max thread length thru-feed rolling: infinite Dia. of rolling spindles: 54mm - Max size of thread dies: 125mm dia x 70mm wide - 4 spindle speeds 40 to 224 rpm

Condition: new, Year of construction: 2025, Ring bending machine roll Bedsgg Nu Ujpfx Adgsdc

Condition: new, power: 346 kW (470.43 HP), fuel type: diesel, axle configuration: 6x6, wheelbase: 3,800 mm, fuel: diesel, gearing type: mechanical, emission class: euro3, Year of construction: 2026, Equipment: air conditioning, cruise control, differential lock, fog lights, = Additional options and accessories = - Immobiliser - Spare wheel = Remarks = Cabin type: Active Time Country of origin: Spain Displacement: 12,900 Steering: LH Drive Construction: Tractor Head EBS + BAS Type: AT720T47WTH Fifth Wheel: Jost fifth wheel Rear Axle : HR-TP Colour: 50105- White IC 194 Headlamps Protection Roof Rotating LED lights Reverse Buzzer Pneum. Horn-Chassis Without PTO preparation Bunk Curtains External Sunvisor 2 lowered bunks w/o prot net Headed Electric rear mirrors Drive T. 14.00R20 Front Multileaf Susp Speed Limiter 80KM/H Rear Axle ratio 5.01 Senza ADM Safety Hor. Filter Cartridge Horizontal air filter 630cc air compressor Standard airtank plating Steel air tanks 90A alternator Standard gear mode 08329 APU free discharge Horiz Batt side fram STD cab insulation Standard grey plastic part Without roof 02640 Mechanical Cab Suspension Manual Cab Tilt AT low roof cab Bdodpjy Tylgefx Adgjc Roof in standard color Standard reverse Temperate countries preparation S Disp oper ped post Fabric air susp driver seat Limitation on CC Lower exhaust pipe Eng RPM = 1900 REV/ 5th W EC POSI06139 front anti roll bar Rear anti roll bar Filter HP TR/NO heat Serb. Comb. 390L ZF 16S 2520 to GBOX Standard Headlights Plates in ECC languages Jack R. overhang 780mm Loads 8000-130000-13000 kgs Bulb rear lights Mechanical battery switch Fabric Sta. 2 way adj. pass Engine plate radiator guard Provision radio and CB Rear suspension no spacer Rear cross member Rear multileaf susp Steel wheels Twinned wheels Grey IC44 chassis Standard cab trim mph/kph speedometer soft touch foam steering wheel with stickers79240 Aux. chassis for 5th wheel Pre heater Generic towhook Trattam. Prot. STD 15 Pin trailer plug Towing version Ft/Rr Torque 1:1 Tyre inflation hose VIN code check digit warning Triangle Radice VIN WJM STD setting C11/C13 Steel front bumper = More information = Number of cylinders: 6 GVW: 33.000 kg

Condition: new, power: 346 kW (470.43 HP), fuel type: diesel, tire size: 12.00R20, axle configuration: 6x4, wheelbase: 3,500 mm, fuel: diesel, fuel tank capacity: 680 l, color: white, gearing type: mechanical, emission class: euro3, Year of construction: 2026, Equipment: air conditioning, cruise control, fog lights, trailer coupling, = Additional options and accessories = - Immobiliser - LED headlights - Spare wheel - Sun visor = Remarks = Cabin type: Sleeper - Active Time Country of origin: SPAIN Displacement: 12,900cc Gcw: 120 Tons Brakes: Drum , Air Dual circuit Steering: LH Construction: Tractor Head Headlamps Protection Roof Rotating LED lights 7+7 Pin Trailer plug Fuel Tank 680 LT Pneum. Horn-Chassis PTO pre - equipment Curtains on door windows 2 lowered bunks w/o prot net Heated Electric rear mirrors rear dampers Front multileaf susp Loads 7500-13000kgs Drive T. 12.00R20 EBS+BAS Safety Hor. Filter cartridge Horizontal air filter 630cc air compressor Standard airtank plating Steel air tank 90A alternator Standard Gear mode 08329 APU free discharge Horizontal batt side fram Manuals EMEA APAC STD Cab insulation Standard grey plastic part Mechanical cab suspension Manual Cab Tilt At lowroof cab Roof in Standard color Standard reverse Temperate countries preparation S Disp oper ped post Fabric air susp driver seat Limitation on cc Lower exhaust pipe Eng RPM = 1900 REV/ 5th W EC POSI06139 Mounting Plate H=16MM Rear anti roll bar Filter HP TR/No heat ZF 16S 2520 to GBOX Standard Headlights Plates in ECC languages Jack R. overhand 785mm Bulb rear lights Electronic Battery cut off Emission Euro III Fabric Sta. 2 way Adj Pass Engine Plate Radiator Guard Provision Radio and CB Rear suspension no spacer Rear Axle ratio 4.23 Rear cross member Rear Multileaf Susp Rever Monotone buzzer Steel wheels Grey IC444 chassis Standard Cab Trim MPH/KPH speedometer Speed limiter 90KM/H Soft touch foam steering wheel With stickers 79240 Aux. Chassis for 5th wheel Pre heater Trattam Prot STD Towing version Trye inflation hose Vin Code check digit Warning Triangle Radice VIN WJM STD Setting C11/C13 Tryes 12.00R20 5th wheel 3 1/2" + moun. Plate Steel front bumper Front Anti Roll Bar Bdsdpfsy Tydvjx Adgjc = More information = Tyre size: 12.00R20 Number of cylinders: 6 Engine capacity: 12.900 cc Empty weight: 9.980 kg

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Siemens, controller model: PLC, number of rollers: 4, roller (bottom) diameter: 190 mm, roller (top) diameter: 210 mm, side roll diameter: 170 mm, roller diameter: 210 mm, roller length: 2,050 mm, working width: 2,000 mm, roller height adjustment: 700 mm, working height: 700 mm, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 5 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 15 mm, sheet thickness copper (max.): 15 mm, overall weight: 5,000 kg, total length: 4,600 mm, total width: 1,400 mm, total height: 1,700 mm, power: 5.5 kW (7.48 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, number of digital displays: 1, warranty duration: 24 months, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, W12-8X2000 Four-roller Plate Rolling Machine This machine is equipped with plate end pre-bending and CNC rolling functions. It allows the metal plate to be fed in one single pass, completing pre-bending and roll forming of the workpiece without the need for turning over the plate. The upper working roller serves as the main drive roller, while the lower roller and two side rollers are hydraulically driven. Their lifting strokes are controlled by the CNC system, enabling automatic leveling with a synchronous display accuracy of ±0.1 mm. The tilting and resetting of the tilting bearing housing adopts a hydraulic transmission structure, and the upper roller is equipped with a balancing mechanism to facilitate the removal of the finished workpiece. The machine comes with a movable independent control console for flexible repositioning at any time, and is equipped with safety interlock devices to ensure safe and reliable operation. Working Roll Material The working rolls are made of 42CrMo high-strength premium alloy steel, manufactured through forging, rough machining, and quenching & tempering heat treatment, achieving a bulk hardness of HB 240–300. After finish machining, they undergo medium-frequency induction hardening, resulting in a surface hardness of HRC 47–58. The products comply with the JB/ZG4289-86 standard for roll steel, ensuring uniform roll rigidity with a controlled deflection of (1/700–1/1000)L. Note: L refers to the center distance between the two side frames. The entire production process strictly follows the standard manufacturing flow for rolls, fully guaranteeing the comprehensive mechanical properties of the working rolls. Bdsdjy Ugtajpfx Adgoc Working Roll Rotation & Drive System The upper roll is the driving roll of the four-roller rolling machine. It is fitted with an independent hydraulic motor directly coupled to the heavy-duty gear housing, with no intermediate gear transmission. This is the most energy-efficient drive design. The hydraulic motor is equipped with an instant braking device, enabling accurate positioning of the roll shaft during pre-bending operations. Double-row spherical roller bearing Excellent Self-aligning Performance The outer ring adopts a spherical structure, allowing the inner ring and roller assembly to deflect within an angle of 1.5°~3°. It can automatically compensate for misalignment caused by installation errors and shaft deflection, preventing seizure and abnormal wear. Heavy Load & Impact Resistance Line contact between rollers and raceways enables the bearing to withstand extremely high radial loads as well as bidirectional axial loads, perfectly suited for heavy-duty working conditions of rolling machine rolls. High Durability Made of high-strength bearing steel with quenching and other heat treatments. Combined with a well-designed lubrication system, it ensures long-term stable operation under harsh conditions and greatly reduces downtime for maintenance.

Condition: excellent (used), CATALOG NUMBER 6875 TECHNICAL SPECIFICATIONS - Infeed width: 720 mm - Infeed height: 160 mm - Maximum input material thickness: 160 mm - Shaft width: 720 mm - Shaft diameter: 600 mm - Knife length: 80 mm - Number of knives: 4×12 pcs - Screen size: 25 mm - Infeed pressure feed roller motor: 0.75 kW - Lower toothed feed roller motor: 1.8 kW - Upper toothed feed roller motor: 1.8 kW - Vibrating chute length: 4470 mm - Vibrating chute width: 710 mm - Vibrating chute motor: 2.2 kW - Main motor: 55 kW - Autoreverse (with adjustable control) - Extraction nozzle diameter: 260 mm Bodpfxjza D T Tj Adgsdc - Vibrating chute dimensions (L/W/H): 4470/950/930 mm - Machine dimensions (L/W/H): 3100/1500/1170 mm - Total weight: approx. 5500 kg – German manufacture – Very low hours – Original documentation – Used shredder, condition very good / excellent Net price: 139,900 PLN Net price: 33,300 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In the event of significant exchange rate fluctuations, the price may be subject to change)

Year of construction: 2021, condition: used, Karl Roll RUK0200-130-150-04 Automated part washing system (2021) The automatic cleaning system is used exclusively for cleaning and degreasing metal parts using aqueous media. Including a VE-Water supply 3x400V/50Hz-415kW/647A total connected power 2000x1300x1600mm batch size/workpiece carrier size (L x W x H) 8.0 batches/hour max. throughput with a batch weight of 300kg (including workpiece carrier) depending on the program 450 kg (carrier + goods) max. batch weight/The weight must be evenly distributed in the basket Cleaning station volume 7550 liters approx. Station 1 6900 liters approx. Station 2 6900 liters approx. Station 3 7500 liters approx. VE water tank Heating - electric 96 kW Station 1 72 kW Station 2 72 kW Station 3 24 kW VE water tank 72 kW Hot air station 75 °C max. temperature cleaning baths 65°C max. temperature VE water tanks Process Station 1: Cleaning 1 in aqueous solution, hot Filter circuit with pressure monitoring Pressure recirculation device Fluid draining Oil separator Short stroke via trolley Re-dosing of 2 different media, Refilling directly or via pump cascade from station 2. Station 2: Rinse 1 in hot aqueous solution Filter circuit with pressure monitoring Short stroke via trolley Refilling directly or via pump cascade from station 3. Station 3: Rinse 2 in hot aqueous solution Filter circuit with pressure monitoring Bdsdpfxjy Uxvte Adgoc Short stroke via trolley DI water recirculation system, Refill directly. Station 4 on unloading track: Hot air drying Fans Heating coil with temperature monitoring Air supply via filter Adjustable Bypass exhaust air Condition: Very Good

Condition: good (used), GMP Surelam-Pro 500D Roll Laminator Production-ready, This high-quality machine is manufactured in Korea. Description: The GMP SURELAM laminator is a professional roll laminator with a working width of 500 mm. This laminator is ideal for a small printing company, advertising agency, or office. Bedpfxjy Sd Txe Adgedc This device allows us to laminate a variety of materials thanks to independent heating control of the upper and lower rollers. Electronic lamination process control and two operating modes: manual and automatic, make working with this machine easy and enjoyable, and ensures laminations are always of the highest quality. The laminator offers single- or double-sided lamination options. Includes laminating pouch Technical specifications: – Maximum laminating width: 500 mm – Pouch thickness: 25-500 microns – Lamination speed: 700 mm/min – Pressure adjustment: manual – Temperature control: digital – Power supply: 230 V – Power: 3000 W

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 100 h, !! Parts in mint condition with warranty!! Bdedpfx Asucwzajdgjc Price between €300-1000 each. Over 40 motors and controllers available. A list of the items is available upon request. We would be happy to advise you!

Condition: used, Year of construction: 2001, sheet width 1650 mm plate thickness 0,5- 3 mm number of rolls 21 straightening feed 0- 60 m/min straightening roll diameter 50 mm adjustment 30 mm weight of the machine ca. 24,5 t dimensions of the machine ca. 4,5x 2 x 2,8 m voltage 400 V passage width 1720 mm Bdjdszafi Nepfx Adgsc number of support rolls 18 main drive motor 45 kW run-in height 1250 mm 6 HI High-performance straightening machine with 21 rolls for fine straightening work of steel or non-ferrous metals. Machine has 23 intermediate rolls and 18 support points. Working rolls are adjustable with DRO in 0,01 mm. Main Gearbox was renewed in 2021.

Condition: used, empty load weight: 3,520 kg, maximum load weight: 14,480 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2022, next inspection (TÜV): 05/2026, suspension: air, tire size: 265/70 R19.5, | Scheuwimmer hook-lift trailer | Tyres: 265/70 R19.5 | BPW axles with drum brakes | Toolbox | Valid inspection certificate until 05/2026 | Errors, input mistakes, and prior sale excepted. Bdodpfx Adjypbacsgec

Condition: ready for operation (used), Tool changer turret for DMC 63 V machine, 24 tool holders, Ø 74.5 cm, used, in good condition, 100% functional. Scope of delivery as shown in the photos. PLEASE NOTE: Please request separate quotes for packaging and shipping costs! Bdsdpfoy U Tm Tox Adgsc

Condition: excellent (used), Year of construction: 2014, sheet width 2050 mm plate thickness 6.0 mm ST pre-bending 5.0 mm ST diameter of upper rolls 170 mm side roll diameter 165 mm diameter of lower rolls 135 mm Control SIEMENS oil volume 80.0 Liter voltage 380 V total power requirement 7,5 kW weight 3450 kg Dimensions (only the machine) 3750 x 1170 x 1000 mm very good condition (!!) current new price incl. accessories approx. 70.000 Euro special price on request The FACCIN 4HEL model series is regarded in the industry as one of the most most precise, reliable and productive electronic 4-roll round bending 4-roll round bending machines worldwide. It has been specially designed for high throughput rates and maximum accuracy for medium to heavy sheet thicknesses. Features: - robust electro-hydraulic 4-roll round bending machine * with linear guidance of the rolls * the side rollers move on a straight, diagonal axis . up and down * extremely short distances between the rollers, . which increases the bending quality - 4-roll concept offers a wide range of bending and rounding options - Freely movable control unit * SIEMENS numerical control with touchscreen * Control of all rollers and machine axes * Digital position display of the side rollers * Manual operation possible via electric buttons - Infinitely variable adjustment of the bending speed - top roller and bottom roller with hydraulic motors and planetary gears * active rotary movement = side rollers run freely with - Conical rolling possible by tilting the rollers * Reduction of the maximum material thickness by approx. 50-60 % Bsdpfx Aey Uy R Sodgodc . during conical bending - Electronic roller parallelism (EPS) - Bending on both sides - diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rollers with a hardness of 53-55 HRC - Low-maintenance, stable machine concept - Sturdy welded steel construction - electro-hydraulic hinged bearing for easy pipe removal - pressure gauge / pressure display for the rollers - safety device (safety line with switch unit) - Manual central lubrication - operating instructions incl. circuit diagram CE explanation

Condition: refurbished (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: Nadany w/g wskazań klienita, Roadheader for mining, designed for preparatory work and tunnel construction (for roads) in mountainous areas. Refurbished and ready for immediate operation, with warranty. Combainer types: AM 50, AM 75, MR 340. Bodpfszai Ivsx Adgodc

Condition: excellent (used), Year of construction: 2022, operating hours: 10 h, ABB IRB 1200-5 /0.9 +Controller +TPU DEMO ROBOT as new DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc. Bodpfxoxq Tu Tj Adgedc

Condition: new, Year of construction: 2025, ABB IRB1200-7/0.9 NEW!!With Omnicore C30 controller 09.2025 ABB warranty untill have 2 robots on stock. DEVELOPMENT OF GSG ROBOTICS Bsdpsxq Tugefx Adgsdc GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: excellent (used), Year of construction: 2016, ABB IRB4400L-10+IRC5 controller+TPU-Low DTC Bdjdpoxq Tt Nefx Adgec DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.