Used Leadermac Mrs 350 for sale (7,983)

Condition: new, axle configuration: 2 axles, Year of construction: 2021, Equipment: ABS, Technical specifications for the EBERT TLS 43 ST special low-loader: Permissible fifth wheel load: 19,000 kg, Permissible axle load: 24,000 kg, Permissible total weight: 43,000 kg, Payload: approx. 32,200 kg, Low-bed length: 9,350 mm, Axle center distance: 2,700 mm, Overall width: 2,550 mm, Loading height/low-bed: approx. 200 mm, 350 mm, Overwidth signage at the front and rear with red/white signs Wheels: 245 / 70 R 17.5 Steering: TRIDEC Axles: 12,000 kg – Gigant axles, hydraulically steered Electrical system: NATO connector used, power supplied by the towing vehicle, rotating beacon at the rear center, side marker lights in LED design, standard rear light for vertical mounting (LC5) Hydraulics: Hydraulic system on the upper deck for steering Upon request, we can provide you with a leasing or financing offer from Mercedes-Benz Bank. Mr. Ebert (Tel.) will be happy to assist you. Further information can be found on our website. Errors and prior sale are subject to change! Rental possible = Further information = Hedpfx Ahsyfp Aqs Ssnt GVWR: 43,000 kg Please contact Tobias Ebert for further information.

Condition: used, Year of construction: 2016, 1) Zyklomat coolant cleaning system, application: cleaning of grinding emulsion, cleaning capacity: 350l/min, recirculation clean tank-dirty tank: 100-350l/min, max. machine supply: 250l/min, supply pressure: 3.5bar, filtration principle: ZYKLOMAT high-performance hydrocyclone Z1B-9/3, separation limit: approx. 5µm, medium: emulsion 3-6%, max. medium temperature: 50°C, solid particles: brass particles, max. solids quantity: 15kg/h, total volume: 5.14m³, operating volume: 3.6-4.58m³, process: fully automatic full-flow filtration, sludge discharge: fully automatic, with non-flowing consistency, 2) double scraper tank for grinding sludge KR 1.75-5.1, total volume: 5.14m³, max. volume: 4.58m³, length: 4,000mm, including 70mm reinforcement, width: 1,890mm, including 140mm reinforcement, height: 1,105mm, including 100mm base profile, neck height: 2,300mm, max. theoretical discharge capacity: 15kg/h, function: coolant storage tank with integrated clean tank, sedimentation and flotation tank with fully automatic sludge discharge, serviced annually, fully functional, no known defects, with documentation. An on-site inspection is possible. Hnjdpfszvghkox Ah Sot

Condition: used, Year of construction: 2018, Second-hand machine Year of manufacture: 2018 Features and technical specifications: Hnedpfx Aezk Nlneh Sjt - The drilling depth is adjusted via a maintenance-free linear guide - Efficient and cost-effective operation thanks to the rapid-lift system, eliminating the need for laborious cranking - Smooth-running and infinitely variable drilling unit - Height adjustment with fine adjustment and gas pressure cylinder for weight compensation - Transverse and height adjustment with scales and adjustable stops - Vibration-free operation thanks to robust steel construction - Drilling depth adjustable via a scale and stop - The drill head height adjustment can be used entirely for vertical slotting - Large-dimension grey cast iron table with a ground surface - Motor power: 1.5 / 1.9 kW - Voltage: 400 V - Speed: 1,400 / 2,850 rpm - Westcott drill chuck: 0–20 mm - Maximum drilling depth: 220 mm - Drilling width: 340 mm - Height adjustment: 145 mm - Swivelling drill head: -60° to +60° - Drilling table size: 595 × 315 mm - Table extension: 2 × 200 × 220 mm - Drilling table height: 830 mm Dimensions: 1,200 × 1,050 × 1,300 mm Weight: approx. 240 kg Availability: at short notice Location: Flörsheim

Condition: good (used), functionality: fully functional, machine/vehicle number: E9-00274, For sale is a Daewoo G50SC-2 forklift with a gas-powered engine and side shifter. The forklift is in perfect working order. The last inspection was carried out in 2023. Hjdpfsz Apf Sjx Ah Sjnt Technical data and equipment: • Manufacturer: Daewoo • Model: G50SC-2 • Engine: Gas / LPG • Rated load capacity: 5,000 kg • Load capacity with mounted attachment according to the nameplate: 4,550 kg at a 500 mm load center and 3,650 mm lifting height • Side shifter • Operator protection roof with weather protection • Windshield with windshield wiper • Work lights • Mount for two gas cylinders The forklift is in used condition with typical signs of wear and tear. Suitable for material handling, warehousing, and loading/unloading operations. Inspection and demonstration are possible by arrangement. Location: Quickborn (25451) near Hamburg, close to the Quickborn highway exit. If you are interested or have any questions, please do not hesitate to contact me.

Year of construction: 2024, condition: like new (used), functionality: fully functional, The Emmegi Rifila is a miter saw with a blade that moves from below, specifically designed for the precise cutting of aluminum profiles and sheets. Its robust construction ensures exact cuts with perfectly parallel profile sides. The machine can be equipped with roller conveyors to enable flexible use. The saw includes 2 new roller conveyors (see photos). - Precise cuts due to the stable machine structure - Versatile for use with profiles and sheets - Safety through an effective protective cover - Easy operation with an adjustable stop and scale - Carbide-tipped saw blade, Ø 350 mm - Max. after-cut height 120 mm - Protective device for the cutting area - Lubrication system with micro-spray device - Motor: Self-braking three-phase motor Hodpjza Aafefx Ah Ssnt - Motor power: 1.5 kW - 2 roller conveyors

Condition: new, TECHNICAL DATA: - Footprint: 15,000 x 20,000 mm [other versions available] - Grid: 5,000 x 5,000 mm - Top edge of floor covering: 3,340 mm - Clear height: 3,000 mm [customizable] - Floor covering: 38 mm particle board, P6 grade, raw/white - Load capacity: 350 kg - Colour: RAL of your choice - Condition: new The mezzanines can be extended in the specified grid as standard. Other sizes and heights available upon request. Our team is happy to advise you! Hnjdpsxpic Refx Ah Sjt Scope of delivery: - Columns - Main and secondary beams - Bracing crosses - Floor covering - Fastening material PRICES: 25 m² | Area: 5,000 x 5,000 mm | €2,345.00 net, plus transport costs and VAT 50 m² | Area: 5,000 x 10,000 mm | €4,135.00 net, plus transport costs and VAT 75 m² | Area: 5,000 x 15,000 mm | €5,835.00 net, plus transport costs and VAT 100 m² | Area: 5,000 x 20,000 mm | €7,645.00 net, plus transport costs and VAT 100 m² | Area: 10,000 x 10,000 mm | €7,555.00 net, plus transport costs and VAT 150 m² | Area: 10,000 x 15,000 mm | €10,985.00 net, plus transport costs and VAT 200 m² | Area: 10,000 x 20,000 mm | €14,175.00 net, plus transport costs and VAT 300 m² | Area: 15,000 x 15,000 mm | €20,515.00 net, plus transport costs and VAT 400 m² | Area: 20,000 x 20,000 mm | €26,675.00 net, plus transport costs and VAT 500 m² | Area: 20,000 x 25,000 mm | €30,035.00 net, plus transport costs and VAT Further versions available. Optional accessories: - Guardrail - Flush wall connection - Staircase - Transfer station - Impact protection - Diagonal struts instead of bracing crosses, at extra cost YOUR CONTACT PERSONS: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp TRANSPORT & ASSEMBLY We are happy to assist with transport and assembly of the goods. This item is available for collection. Delivery or shipping is available at an extra charge. The additional costs depend on the place of delivery and shipping volume and can be quoted individually on request. TERMS OF PAYMENT Terms of payment must be agreed upon in the event of an order. The price is per unit/net price or as specified in the description (plus VAT). You will, of course, receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, trades in new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machinery for trade, industry, and crafts. We continuously offer interesting used items from various manufacturers/brands at attractive conditions. Please do not hesitate to contact us if you have any questions. 'Vier gewinnt' – The four success modules of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: used, For inquiries regarding the attachment, Mr. Herden will be pleased to assist you (telephone: [please insert number]). Westtech Woodcracker C300 Felling Grapple / incl. Collector Grapple / incl. ALBACH Quick Coupler / BRAND NEW unit / in stock & immediately available - Softwood cutting diameter (mm): 350 - Hardwood cutting diameter (mm): 300 - Grapple opening width (mm): 1,430 - Shear opening width (mm): 550 - Own weight (basic – fully equipped) (kg): 750 – 1,080 - Recommended flow rate main circuit (l/min): 70 – 150 - Recommended flow rate auxiliary circuit (l/min): 45 – 60 - Recommended operating pressure (bar): 280 - Carrier vehicle service weight (t): 12 – 18 Equipment features: - incl. Autospeed function - incl. collector grapple - incl. hydraulic changeover between collector grapple and cutting unit (Sennebogen single circuit system) - incl. ALBACH quick coupler We stock numerous adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) which are immediately available. At our warehouse, we offer a very large selection of various Westtech products, all available for immediate delivery! Mr. Herden (Tel. [please insert number]) will be happy to assist you. Financing options available upon request. We are an official sales and service partner for: - Westtech - OilQuick - Holp - Magni telehandlers - DMS - Gierking GMT - Weber MT - Seppi M. - JCB construction equipment - Mercedes-Benz - Iveco With 800 used commercial vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete range of Westtech Woodcracker products! Errors and prior sale reserved. = Additional information = New: Yes Hnjdpey E Et Tsfx Ah Sst Part suited for: Forestry applications For further information, please contact Marius Herden.

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Equipment and technical data: - Electrics 3x400V 50 / 60Hz - Gimbal-mounted 5-axis electrospindle 12 kW (S6) HSK F63 - 24,000 rpm - ceramic bearings incl. liquid cooling with infinitely height-adjustable extraction hood - electric-motor controlled - full rated power at approx. 12,000 rpm - speed: 1000 - 24000 rpm - drive: 3-phase HF motor, inverter-controlled - direction of rotation: clockwise/counter-clockwise - 2 controlled compressed-air connections - interface for aggregates - tool weight (rotating): 6 kg - max. saw blade Ø 350 - spindle cooling: liquid cooling - extraction hood infinitely variable - Profit H350 16.30: CNC machining centre in gantry design (without tool) with digital drives (driven on both sides). The machine column of the Profit H350 16.30 is made of thick-walled, electrically welded rectangular tubes. The steel ribbing inside the column achieves high stability. - Machining field H350 16.30: Travel of the axes: X = 4000 mm Y = 1970 mm Z = 455 mm Working field: X = 3000 mm Y = 1500 mm Z = 150 mm clearance height Axis positioning speeds: depend on the selected safety system (these can be found in the layout). - Travelling gantry driven on both sides - Guide system X axis: The travelling gantry of the X axis is driven via a rack with inclined, crowned tooth form - This guarantees highest precision. The reduction gear ensures highest machining quality and repeat accuracy. The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. Hnjdpfx Ajzlbpbjh Sjt - Guide system Y axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Y axis is positioned by means of a ground recirculating ball screw. - Guide system Z axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Z axis is positioned by means of a ground recirculating ball screw. - Automatic central lubrication: The grease is delivered in a controlled manner to the guide carriages of the X, Y and Z axes as well as to the recirculating ball screws in Y and Z. The lubrication process is carried out automatically after a specified time. - 12-position linear tool changer on the left of the machine column incl. a pick-up position for aggregates: The 12-position linear changer ensures shortest changeover times and offers sufficient space for milling tools. One aggregate change position (fitting variants see layout) Max. tool diameter 250 mm Max. tool length 240 mm - Drilling head DH 18 6H 1S: Vertical 12 spindles: 7 spindles in the X direction and 5 spindles in the Y direction. Horizontal 6 spindles: 4 spindles in the X direction and 2 spindles in the Y direction. Forward stroke = 70 mm max. drill length = 70 mm and shank D = 10 mm. All spindles are individually driven and selectable. 1 grooving saw – in the X direction max. saw blade diameter 120 mm max. blade thickness 5 mm max. speed infinitely variable up to 7500 rpm. The drilling group covers the entire working field both horizontally and vertically. - Controlled central extraction connection: Via the program control, either the drilling head or the milling spindle is extracted. This controlled slide gate achieves an optimised extraction performance. Connection diameter see layout - 6 workpiece supports: With front and rear...

Condition: excellent (used), Year of construction: 2019, operating hours: 5,045 h, functionality: fully functional, machine/vehicle number: 3116946, turning diameter over cross slide: 279 mm, turning length: 406 mm, turning diameter: 279 mm, spindle bore: 64 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 200 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 406 mm, spindle motor power: 15 W, rotational speed (min.): 4,000 rpm, rotational speed (max.): 6,000 rpm, total height: 2,167 mm, total length: 3,395 mm, total width: 1,612 mm, feed rate X-axis: 12 m/min, feed rate Y-axis: 12 m/min, feed rate Z-axis: 30 m/min, workpiece weight (max.): 3,583 kg, type of input current: three-phase, overall weight: 3,583 kg, spindle nose: -, Equipment: documentation/manual, Used turning center for sale – CNC lathe with Y-axis and driven tools, in very good condition. Contact us for further details. Model: HAAS ST-15Y Year of manufacture: 2019 Maximum turning diameter: 305 mm Reblezr E H Djvzwyrecf Maximum turning length: 406 mm Y-axis travel: 102 mm Bar capacity: 64 mm Chuck size: 8 inches Hnedpfx Aezr E H Deh Sjt Maximum spindle speed: 4000 rpm Number of controlled axes: 4 Spindle motor power: 14.9 kW Tool size: BOT 6/12 VDI40 Controls: HAAS 2019 Voltage: 440V AC Weight: 3583 kg Dimensions (L x W x H): 3030 x 1550 x 1810 mm Additional Equipment: VPS Programming System, Hydraulic Tailstock, HAAS Auto-door, Chip conveyor, 6000 rpm Live Tools Resale capability included. The center is in very good condition. It is currently in continuous operation and connected to power. The machine operated in one shift.

Condition: new, axle configuration: 3 axles, Year of construction: 2022, Equipment: ABS, Technical data for the EBERT TLS 43 ATV special low-loader: Permissible saddle pressure: 19,000 kg, Permissible axle load: 36,000 kg, Permissible total weight: 55,000 kg, Unladen weight according to DIN: approx. 15,500 kg, Low-bed length i.L.: approx. 6,650 mm + 4,000 mm, Axle table length: 3,550 mm, External width: 2,550 mm, Loading edge/low-bed: approx. 200 mm, 350 mm, Sliding table length: 500 mm, Extension/low-bed to: 3,050 mm, Low-bed/extendable by: 4,000 mm, B-dimension: 13,300 mm, Entire vehicle hot-dip galvanized, with epoxy primer and 2K paint finish, overwidth signage at the front and rear with red/white panels. Wheels: 13 x Michelin 245 / 70 R 17.5 X MULTI T VB 143J/146F Steering: TRIDEC DLS with Tritronic Axles: 12,000 kg – DLS single-wheel suspension, hydraulically steered and hydraulically sprung Front upper deck: Sideboards, 600 mm high, corners angled on the front upper deck, doors accessible from the outside in the corners on the left and right, lockable storage box with a lid behind the front wall, height 600 mm, width 2,480 mm, depth 7,500 mm, spare wheel on the upper deck, behind the partition on the right, ladder on the right side to get from the low-bed to the front upper deck, hydraulic coupling for detaching on the left side, 6-way Multi-Faster coupling, 6 tie-down positions, 3,000 kg capacity, on the outside of the upper deck (eye-type tie-down points), 2 tie-down positions, 5,000 kg capacity, on top of the longitudinal beams (towards the rear). Low-bed: Climbing aids on the boom - extension, outer frame t=8 mm, low-bed extendable by 4,000 mm and lockable every 500 mm, with sliding table, lockable every 250 mm, 28 tie-down positions, 10,000 kg capacity, on the outside of the outer frame, 24 insertion pipes 90 x 90, evenly distributed for low-bed extension to 3,050 mm, 50 mm hardwood planks are placed between the extension tubes, 10 mm overhang. Rear upper deck: Upper deck sloping and perforated towards the front, for retrofitting ramp attachment profiles, using adapters with a galvanized finish, ramp attachment profiles (Altec) – C rails at the rear, 8 tie-down positions, 10,000 kg capacity, on the outside of the upper deck, 6 tie-down positions, 5,000 kg capacity, in the excavator well, 10 tie-down positions, 5,000 kg capacity, for overwidth on the outer frame, closure of the excavator well at the front and rear with a wooden floor panel (insertable). Electrical system: Use NATO coil, energy comes from the towing vehicle, revolving beacon at the rear in the middle, side lights in LED version, standard rear light for vertical mounting (LC5), work lights on the upper deck, to illuminate the low-bed, overwidth signage at the front and rear for controlling the detachment, sensor for securing and pressure switch for the suspension. Air: Aluminum air reservoir 80 l, TEBS modulator, locking of extension on the left and right (valve on the side in the rear upper deck), double release valve. Hydraulics: Hydraulic system on the upper deck for steering, suspension and detachable gooseneck. Accessories: Hjdpfx Ahsyfu N As Sent 2x 4 pieces of wooden plank as support for extending the low-bed and intermediate table, 2 pieces of securing wedges for detaching, 4 pieces of chock blocks. Upon request, we will provide you with a leasing or financing offer. Mr. Ebert (Tel. ) will be happy to assist you. Further information can be found on our website. Errors and prior sale are excepted! Rental possible GVW: 55,000 kg Please contact...

Condition: new, For sale: Professional power controller (thyristor-based) Advanced Energy Thyro-A series. The device is NEW – never used (warehouse stock). High-end industrial equipment designed for advanced production installations. 🔧 Technical specifications: Manufacturer: Advanced Energy Model: Thyro-A 3A 400-350 HF RL3 Voltage: 400 V Current: 350 A Output: Relay Out 4A / 250V Type: thyristor power controller (SCR) ⚙️ Applications: industrial furnaces heating systems industrial automation power control in production lines 📦 Included in the set: 3x Thyro-A modules industrial enclosure / heat sink cooling fan full set as shown in photos Hedpfxjyw T Ipe Ah Sont ✅ Condition: NEW – unused May show minimal signs of storage. Fully functional.

Year of construction: 2022, operating hours: 50 h, condition: new, functionality: fully functional, heating capacity: 12 kW (16.32 HP), product height (max.): 100 mm, product length (max.): 100 mm, product width (max.): 100 mm, machine/vehicle number: 43865, The KSN Drum Washer 350 WRD is an industrial cleaning system designed for efficient and reliable parts cleaning in automated production environments. The system combines washing, draining, rinsing and drying in one automated process, ensuring consistent cleaning results while reducing manual handling. The rotating drum provides continuous movement of the components throughout the cleaning process, making the cleaning system particularly suitable for industrial applications requiring efficient and repeatable processing of parts. Designed for continuous operation, the Drum Washer 350 WRD can be integrated into existing production lines and contributes to increased productivity and reduced operating costs. Standard equipment: Siemens PLC Grundfos pump Fully insulated construction Automatic level and pressure monitoring Technical specifications can be found in the attached PDF document. Hnsdozy E Drepfx Ah Sjt

Condition: excellent (used), Pegic miter saw, Model GP 350 RT Year: 2012 Complies with CE standards Includes dust extraction system Hsdpfx Ahjzzw U So Sent

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, power: 7.35 kW (9.99 HP), input voltage: 400 V, input frequency: 50 Hz, cutting height (max.): 105 mm, cutting width (max.): 1,300 mm, saw blade diameter: 350 mm, rotational speed (max.): 4,000 rpm, total length: 4,300 mm, overall weight: 1,300 kg, cutting length (max.): 3,200 mm, pivoting range: 45 °, The Concept 350 combines the advantages of various saw systems: As flexible as a panel saw, the cutting quality of a pressure beam saw, and as ergonomic as a trimming saw. This is the sawing concept for modern industrial production. The machine is a leasing return. Further technical data: - Motorized rip fence with 4 aluminum stops, which move synchronously - Screen control with 8" touchscreen - Air requirement: 6 bar - Sliding table: 1,000 x 400 mm (extension table) - Outrigger table size: 3,200 mm with 2 digital stop jaws - Extraction connection: 1 x 100 mm, 1 x 120 mm - Feed speed: 0 - 40 m/min Special features: - Programmable saw blade height adjustment - Mitre fence +/- 50° - Cutting line laser - Additional support table 800 x 200 mm With the new Concept 350, you no longer need a panel saw! The workpiece rests on the machine and is positioned precisely with a pressure beam. The saw unit can be swiveled from 90° to 45°, is guided with precision, and cuts your workpiece at a constant feed speed of 0–40 m/min, ensuring the best possible cutting results. The standard crosscut fence enables quick cutting to length and efficient operation, with significantly less space required compared to any sliding table saw! Advantages over a sliding table panel saw: Hsdpfx Ajwzuipeh Ssnt - Significantly less space required - The pressure beam secures the workpiece on the machine and guarantees optimal cutting results - The pressure beam prevents the operator from reaching into the saw blade - Ergonomic operation, as the operator no longer has to push the material through the saw blade - Time saving, as the operator does not need to guide the material during the sawing process Including delivery and installation within postal code areas 71, 72, 73, 77, 78, 79, 86, 87, 88, 89.

Condition: excellent (used), Year of construction: 2003, Arburg 570C 2000-350/150 / Production line with the Arburg Multilift side robot / 2K machine Year of manufacture: 2003 Injection unit: Screw diameter: 40 mm Shot weight: 153 g Injection pressure: 2120 bar Dosing volume: 182 ccm Hnodszy I Rhopfx Ah Sjt Clamping unit: Clamping force: 200 t Tie bar spacing: 570x570 mm Platen size: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Production line with the Arburg Multilift side robot 2K machine Air valve x 1 Hydraulic core pull x 5 Control system with hot runner Reinforced injection units – bimetal Proportional valves on injection units – precise injection The vertical injection unit - screw diameter: ⌀25 mm - 49 g/shot A rotary table can be purchased for an additional charge. Dimensions: Weight: 7300 kg All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request.

Condition: excellent (used), Year of construction: 2009, Arburg 420C 1000-350/150 / Production line with the Arburg Multilift H side robot / 2K machine Year of manufacture: 10.2009 Injection unit: Screw diameter: 45 mm Shot weight: 210 g Injection pressure: 1670 bar Dosing volume: 230 ccm Clamping unit: Clamping force: 100 t Tie bar distance: 420x420 mm Mold size: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Production line with the Arburg Multilift H side robot 2K machine with rotary table Control system with air valve Hydraulic core pull x 2 Control system with hot runner Reinforced injection units – bimetal Proportional valves on injection units – precise injection The vertical injection unit – screw diameter: ⌀30 mm – 71 g/shot Rotary table available at an extra charge Side robot Arburg Multilift H Year of manufacture: 2009 5-axis robot: Z-axis with servo motor (electric); X, Y, B and C axes pneumatic Hodpezy Iz Hofx Ah Ssnt Safety package for robots Robot with adapter, conveyor belt, protective housing Purchase of the robot and conveyor belt available at an extra charge Dimensions: Weight: 5210 kg All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Universal Feeder HB 350 The Universal Feeder HB 350 is capable of handling even very heavy products with a height ranging from 2 to 80 mm. Thanks to its independent control and drive unit, it operates completely autonomously. Hnedpeyk Emvefx Ah Set It enables fully automatic feeding of both main products and inserts. For example, magazines or catalogs with a length of 148 – 420 mm, a width of 105 – 315 mm, and a height of 2 – 60 mm can be easily inserted. The performance of this universal feeder reaches up to 18,000 cycles per hour. Thanks to its motorized height adjustment, it can be used flexibly.

Condition: excellent (used), Year of construction: 2008, operating hours: 32,820 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, workpiece height (max.): 400 mm, workpiece width (max.): 700 mm, workpiece length (max.): 1,200 mm, Equipment: cooling unit, Agie Charmilles FI 440 SLP year of manufacture 2008 operating hours 32,820 x, y, z: 550 x 350 x 400 mm u, v: 550 x 350 mm Hnodpezgu Igsfx Ah Sst linear glass scales on all axes 0.5 μm max. workpiece dimensions 1200 x 700 x 400 mm max. taper angle 30 degrees chiller option for large wire spool option for wire chopper automatic wire threading/cutting and repair documentation and software machine powered up for inspection

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, New unit, in stock, immediately available -Volume 18,000 liters -Maximum temperature 350°C -Internal dimensions L x W x H 4100 x 2100 x 2100 mm Hjdeu Hma Nspfx Ah Sont -External dimensions (with rails) L 9970 x W 3060 x H (with lift-up door) 6110 mm -Control system Eurotherm Nanodac -Temperature stability (at rated temperature without load) ±5°C -Automatic inlet and outlet air dampers -Electric lift-up door -Electrically driven hearth carriage -Power 247 ± 9% kW -400 V, 50 Hz -Documentation, CE declaration We would be pleased to offer installation and commissioning, as well as training for your employees. Please contact us! We offer new and used industrial furnaces. Inspections in our warehouse are available upon request! Furnace, kilns, annealing furnace, firing furnace, hardening furnace, heat treatment furnace, tempering furnace, enamelling furnace, drying oven, industrial furnace, heating chamber, heating oven, temperature oven, drying cabinet, chamber furnace, large-volume furnace, bogie hearth furnace, car hearth furnace, shuttle kiln, bogie hearth kiln.

Year of construction: 2006, condition: used, The Ulma PV 350 flowpack machine is designed for packaging loose, difficult-to-handle, delicate, and wet products. It can be used for, among other things, leeks, carrots, fennel, celery, radishes, pak choi, peppers, Chinese cabbage, and even anthuriums. Top sealer Automatic product length sensor Suitable for transparent/unprinted film Double film roll holder, up to a maximum width of 1000 mm Pneumatic opening of the sealing rollers Digitally adjustable sealing temperature Self-centering, adjustable folding unit Electronic speed control Temperature control for sealing bar and sealing rollers Infeed belt on the right side Hnodpfx Ahozxi A Aj Sjt Built in accordance with European directives / CE marking Capacity up to a maximum of 50 pieces per minute, depending on the product. Digital (English) manual available. Upon request, this can be sent to you. Product dimensions Ulma PV 350: Length: Min. 60 mm – up to infinity, using a length indication photocell. Width: Min. 10 mm – Max. 250 mm Height: Min. 10 mm – Max. 235 mm Note: 2 units available.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, total length: 495 mm, total height: 780 mm, total width: 585 mm, overall weight: 17 kg, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading are to be arranged by the buyer! The unit will be available from October 2026! TECHNICAL DETAILS Build volume X-axis: 230 mm Build volume Y-axis: 190 mm Build volume Z-axis: 200 mm Layer height: 0.06–0.4 mm Build plate: Heated glass plate Build plate temperature: up to 120 °C Filament diameter: 2.85 mm Nozzle temperature: up to 280 °C Print speed: up to 150 mm/s Material flow: up to 24 mm³/s Compatible Print Cores: AA 0.4; BB 0.4; AA 0.25; AA 0.8; BB 0.8; CC 0.4; CC 0.6; DD 0.4 MACHINE DETAILS Technology: Fused Deposition Modeling (FDM) Software Print preparation: UltiMaker Cura, Cura Cloud Printer management: UltiMaker Digital Factory Supported operating systems: Windows, macOS, Linux Environmental conditions Operating temperature: 15–32 °C Operating humidity: 10–90 % RH, non-condensing Storage temperature: 0–32 °C Non-operating humidity: 10–90 % RH, non-condensing Placement: Away from direct sunlight Power supply: 100–240 V AC Mains frequency: 50–60 Hz Power consumption: 350 W Hodpfx Ahjzx S Dvs Sont Operating noise: < 50 dB(A) Connectivity: WLAN 2.4 GHz, LAN, USB Monitoring: HD camera Dimensions & Weight Dimensions: 495 × 585 × 780 mm Net weight: 14.4 kg Weight in operation: approx. 17 kg EQUIPMENT Dual-extrusion print head Automatic nozzle lifting system Interchangeable Print Cores Dual-gear feeder Filament flow sensors Dual spool holder with NFC detection Color touchscreen HD camera Heated glass plate PEI print bed Spool holder with material guide Power cable Ethernet cable USB stick User manual CE marking Print Core AA 0.4 – 2 pieces Print Core BB 0.4 – 1 piece Nozzle cover – 3 pieces

Condition: used, Year of construction: 2023, control SIEMENS SINUMERIK 828D greates pass round over bed 650 mm Hjdpfxszzrhye Ah Sont swing diameter over slide rest 540 mm max. turning diameter 395 mm bar material dia. 67 mm x-axis 235 mm y-axis 105(±52.5) mm z-axis 580 mm Feed ( x / y / z) 24/10/24 mm/min spindle tunring speed 4.500 U/min torque 169,8/89,2 Nm spindle nose A2-6 spindle passage 76 mm spindle bearing diameter 110 mm drive capacity - main spindle 20/10,5 kW spindle tunring speed 6.000 U/min torque 45 Nm spindle nose A2-5 spindle passage 45 mm spindle bearing diameter 90 mm Drive power - sub spindle 7,8 kW number of tool places 12 Pos. shank size for square tool 25 x 25 mm Shank diameter for boring bars 40 mm tool taper BMT 55 Live tool torque (Max./Cont.) 44,4/23,4 Nm total power requirement 49 kVA Overall size ca. 4.130 x 1.752 x 2.085 mm weight of the machine ca. 4.200 kg In our assessment, the machine is in mint condition and can be inspected under power by appointment. Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: like new (used), Year of construction: 2023, Technical Data: Maximum clamping force: 3,500 kN Maximum locking force: 3,850 kN Opening stroke: 725 mm Minimum mold installation height: 400 mm Maximum mold installation height: 900 mm (extended) Clamping plate dimensions (h x v): 1,168 x 1,144 mm Clear tie bar spacing (width x height): 830 x 830 mm Maximum mold weight: 6,600 kg Maximum weight on moving platen: 3,800 kg Maximum weight on fixed platen: 5,100 kg Ejector stroke: 250 mm Hodpsy Hmfyofx Ah Ssnt Ejector force (increased): 100 kN Max. ejector speed: 270 mm Screw diameter: 60 mm Injection pressure: 2,426 bar Max. injection volume: 891 cm³ Max. injection speed: 160 mm/s Max. dosing stroke: 315 mm Max. nozzle stroke: 520 mm Nozzle immersion depth: 20 mm Back pressure over dosing stroke programmable Installed cylinder heating: 23.1 kW Material hopper capacity: 110 l Machine weight: approx. 21 t Accessories: Robot: Manufacturer: SEPRO ROBOTIQUE (France) Model: 5T35 2000/900/TE-1800 Year of manufacture: 2023 Stroke: 2,000 mm Speed: 3.5 m/s Horizontal demolding stroke Y-axis: 900 mm Vertical demolding stroke X-axis: 1,800 mm Robot console on fixed platen Gripper function R1 (C) axis pneumatic 0° - 90°, including quick-change plate Weight: 583 kg MuCell Integration: The special option includes: • Plasticizing cylinder with pneumatic shut-off nozzle without mixing element and without non-return valve; • Interface (communication, emergency stop interface); • Software with functional display pages for controlling the MuCell function; • Adapted nozzle guard; • Position-controlled high-speed screw (analog ZE388) Conveyor belt: Width: 870 mm Usable width: 800 mm Length: 3,500 mm Height: 880 - 1,220 mm Load capacity: 38 kg/m² Belt speed: 5.7 m/min Number of frames: 2 Clear tunnel height: 500 mm This injection molding machine is fully equipped!! Condition: As new condition, only 5,290 operating hours.

Condition: used, mileage: 32,312 km, power: 130 kW (176.75 HP), axle configuration: 4x4, color: red, driver cabin: day cab, gearing type: mechanical, emission class: euro1, total length: 71,600 mm, total width: 25,000 mm, total height: 31,000 mm, Year of construction: 1994, Equipment: ABS, For inquiries regarding the vehicle, please contact Mr. Seidel (available by phone at…). Iveco Magirus EuroFire FF95E18W 4x4 LF8/6 fire engine Water tank: 820 liters, rear-mounted Eurofire FP8/8 pump, 158 operating hours, reversing camera system, number of seats: 9, auxiliary heater, radio, manual transmission, engine brake, ABS, sun visor, heated exterior mirrors, electrically adjustable exterior mirrors, differential lock, auxiliary drive, gearbox reduction, halogen headlights, fog lights, auxiliary headlights: vehicle rear, rotating lights, air horns, trailer coupling, tire tread: 1st axle 16 mm, 2nd axle 17 mm. Upon request, we will provide you with a leasing or financing offer. Mr. Seidel (tel. …) will be happy to assist you. You can find more information on our website. ... Errors, changes, and prior sales are subject to change!!! - Cab: Designed for short-distance transport = Further information = Engine displacement: 5,880 cc GVWR: 9,800 kg Hnsdpfjzhfdzjx Ah Sst Please contact Tobias Ebert for more information.

Year of construction: 2018, operating hours: 5,080 h, condition: ready for operation (used), General Data Machine weight 4700 kg Measurements height 1852 mm Dimensions Machine Length 1928 mm Control Unit Brand SIEMENS Model 840D Main Drive Number of axis 3 Spindle Speed 5000 RPM Spindle motor power 16.5 kW Movement X-Axis Movement 242.5 mm Z-Axis Movement 540 mm Y-Axis Movement 80 mm Technical Specification Driven Tools yes Hsdpfx Ahjx D Huao Sont This 3-axis DMG CLX 350 V4 was manufactured in 2018 and features a max turning diameter of 320 mm, spindle speed up to 5,000 rpm, and a bar capacity of Ø 65 mm. It includes a VDI 30 turret with 12 stations for driven tools, enhancing versatility. Ideal for precision turning with rapid traverse rates and Siemens 840D sl control for advanced operations. Contact us for more information about this machine. Application Types Turning