Used Marx Transformatorenbau Mg 513 for sale (1,133)

Condition: new, Grinder for frozen block meat Throughput depends on material type, speed, and cutting set Capacity: up to 6.000 kg/h Electric power: 55 KW Cgodpjum Tx Refx Aiaju Voltage: 380 V, 50 Hz Dimensions of the machine in cm: Width: 131 Length: 205 Height: 245

Year of construction: 2023, condition: new, functionality: fully functional, 3 UNITS JWELL - 65 TWIN-SCREW CONICAL EXTRUDER Codpfoy Sxizex Aiaegu

Condition: new, functionality: fully functional, machine/vehicle number: NEW-19, maximum load weight: 1,105 kg, overall weight: 1,350 kg, axle configuration: 1 axle, loading space length: 2,050 mm, loading space width: 1,330 mm, loading space height: 430 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, SARIS CW 205 133 1350 2 NEW VEHICLE Internal dimensions: 205 cm x 133 cm Sidewall height incl. railing: 43 cm Loading platform height: 52 cm Gross weight: 1350 kg Payload: 1100 kg Braked single-axle low-loader Overrun brake and handbrake by AL-KO 1350 kg axle with brake Low chassis Fully welded, hot-dip galvanized steel frame 15 mm thick, robust phenolic plywood sidewalls Steel railing Rear drop-down/removable tailboard with tension locks 15 mm thick, slip-resistant, robust phenolic plywood floor Jockey wheel 6 lashing eyes with 400 kg traction force 14" reinforced C-type tyres M+S tires Mesh/rope hooks on the frame 13-pin plug Front marker lights Rear lights with reversing light, fog light and triangular reflector OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026: - 100 km/h equipment (shock absorbers) - Spare wheel with holder - Folding and removable front board - Loading ramps - SARIS light alloy wheels - Complete LED lighting - Anti-theft lock - Fine or coarse-mesh net - H-frame - Mesh sides in various heights, also available closed - Flat tarpaulin with or without bows - Raised tarpaulin 120 cm - Rear supports Additional accessories available on request! Plus freight to Gera and vehicle registration documents: €100 net. Images are for illustration purposes and may show optional accessories subject to surcharge. Haven't found the right trailer yet? We have 50–100 vehicles permanently in stock and ready for immediate pickup. Cedpfx Aerk Ik Heiajgu Our workshop operates weekdays from 8:00 am to 5:00 pm for all kinds of repairs. Axle repair specialist, including for caravans. Large selection of rental trailers available. We also offer a wide range of spare parts and accessories for trailers of all manufacturers. Get advice by phone, visit our website, or come by directly.

Condition: new, empty load weight: 242 kg, maximum load weight: 1,058 kg, overall weight: 1,300 kg, axle configuration: 1 axle, loading space length: 2,510 mm, loading space width: 1,310 mm, loading space height: 350 mm, total length: 3,798 mm, total width: 1,805 mm, total height: 901 mm, Year of construction: 2026, Humbaur HA 132513 FS Our price – 1950 including 19% VAT, 6.4% delivery surcharge, and vehicle documents! Description: One for almost everything. With the wide range of accessories, you can equip the HA low-bed trailer for many different applications. It transports your motorcycles, bicycles, garden equipment, and more. To prevent the load from slipping, secure it with the lashing eyes recessed into the aluminum side walls. Cjdpfx Aezbt U Ajiaegu Technical data: Trailer type – single-axle * Design – aluminum * Weight – 242 kg * Gross vehicle weight – 1300 kg * Payload – 1,058 kg * Internal length – 2,510 mm * Overall length – 3,798 mm * Internal width – 1,310 mm * Overall width – 1,805 mm * Internal height – 350 mm * Overall height – 901 mm * Loading height – 530 mm * Tires – 14 inches Standard equipment: V-shaped drawbar, hot-dip galvanized * 13-pin connector, reversing light from 751 kg permissible gross vehicle weight * Floor panel 15 mm thick * Side walls made of anodized, double-walled aluminum profiles * Flap(s) with recessed latches * Lashing eyes (4 pieces up to 2050 mm / 6 pieces from 2510 mm box length) integrated into the side walls, tensile force 400 kg per lashing eye, DEKRA tested * Humbaur multi-function lighting integrated into the underrun protection * Corner posts with insertion option

Condition: used, Professional meat grinder Duker Rex is designed for fast and efficient grinding of fresh and slightly frozen products with high capacity and reliable performance. This model is equipped with an automatic feeding worm system that enables continuous and even product transfer to the grinding unit, ensuring stable operation and high productivity. The large 120 liter hopper allows processing of bigger product quantities without frequent refilling, while the production capacity of up to 2000 kg/h makes this machine an excellent solution for intensive professional use. It is suitable for processing meat, poultry, fish, vegetables and other food products. The model uses the Unger cutting system with a 130 mm plate diameter, ensuring precise and high-quality grinding with a uniform final product texture. Stainless steel construction provides long service life, high hygiene standards and easy maintenance. Robust industrial design, powerful 11 kW motor and stable construction guarantee safe and reliable operation in demanding working conditions. Technical specifications: Machine type: Meat grinder Manufacturer: Duker Rex Capacity: up to 2000 kg/h Hopper capacity: 120 L Power: 11 kW Voltage: 400 V / 3+N Frequency: 50 Hz Cutting system: Unger Plate diameter: 130 mm Loading height: 1300 mm Output height: 680 mm Dimensions: 800 x 1200 x 1370 mm Cgjdpfx Aioy Izlkeaou Net weight: 674 kg Material: Stainless steel Operation: Stable, powerful and reliable Maintenance: Easy and simple

Condition: new, empty load weight: 410 kg, maximum load weight: 890 kg, overall weight: 1,300 kg, axle configuration: 1 axle, loading space length: 2,515 mm, loading space width: 1,320 mm, loading space height: 1,527 mm, total length: 3,821 mm, total width: 1,806 mm, total height: 2,125 mm, Year of construction: 2026, Humbaur box trailer HK 132513-15P FlexZurr with a ramp instead of a door at the rear, white. Maximum load: 300 kg, with a ramp for easy loading. Our price: €4,100 including 19% VAT, 6.4% delivery surcharge, and vehicle documents! Description: Our single-axle trailer is designed for maximum stability: hot-dip galvanized steel chassis, plastic seals on the doors, and robust reinforcements in the roof and front panel – this trailer has a long service life. The integrated lashing system secures the load inside. A light provides sufficient illumination. This ensures your goods arrive reliably and undamaged. Technical data: Trailer type: Single-axle Construction type: Plywood Weight: 410 kg Gross vehicle weight: 1300 kg Payload: 890 kg Internal length: 2515 mm Overall length: 3821 mm Cgjdpfx Aozbl Izsiaou Internal width: 1320 mm Overall width: 1806 mm Internal height: 1527 mm Overall height: 2125 mm Loading height: 535 mm Ramp angle approx. 21° Tire size: 14 inches Equipment: V-shaped drawbar, hot-dip galvanized 13-pin connector Floor panel, 15 mm thick Side walls and roof made of multi-layer wood, 15 mm thick, with UV-resistant plastic coating (GFK top layer for 5290.002 & 5291.002) Interior light, mounted Rotating rod latch and hinges, galvanized 6 lashing rings in the frame profile, flexibly adjustable, tensile force 400 kg per lashing ring, Dekra tested Support wheel

Condition: new, Year of construction: 2025, Another machine immediately available! Briquetting press with PLC control and automatic briquette length adjustment Throughput: up to max. 60 kg/h Briquette: 50 mm cylindrical Motor: 5.5 kW Dimensions: 1,900 x 1,350 x 1,410 mm Weight: approx. 860 kg Requirements: Feed material should ideally be shorter than 25 mm chip length Moisture content 6–12% ATRO Machine suitable for intermittent operation. E.g. briquetting for up to 2.5 hours; 1 hour break, etc. If the machine needs to run longer than 2.5 hours continuously, optional cooling must be connected. Cgjdpsv Rpxljfx Aiaeu

Condition: new, Year of construction: 2026, Your advantages: + extremely large cutting unit opening with 1300x1200mm + special rotor suitable for hardwood and softwood + Energy-efficient and powerful with 37 kW at start-up Technical specifications: Colour: grey / blue Feed opening (mm): 1,300 x 1,200 Hopper capacity (cbm): 1.6 m³ Rotor diameter (mm): 368 Rotor speed (rpm): 65 - 125 Power requirement (kW): 37 Screen perforation (mm): 30 - 50 mm - selectable Tools: 37/70 knives Extraction nozzle Ø (mm): 200 mm Dimensions: 2430x2410x1735 mm (lxwxh) Weight (approx. Kg): 3,920 Optional for a surcharge: * to shred veneer or paper (anything thinner than 3 mm) - we recommend a segment floor. The machine in preproduction has not yet installed this. Special option at an additional cost. Cgodpfx Aijgbkkrjaou - 2nd row of knives, for up to 30% more throughput - Fast hydraulics, for increased throughput - Preparation for conveyor belt removal - conveyor belt - HAWK-EYE overbelt magnet --- Optimal pallet size with the option slide extension = 1200x1400 (option slide extension, the cutting unit opening 1300x1700 surcharge + 12,975.00) * is associated with significantly longer production time. * larger machines on request --- Requirements for the raw material: - The moisture content (atro) must be below 30% - The loading must be free of metals and mineral impurities. This can result in damage to the tools and / or increased wear

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 55 h, Machine with special rotor available immediately Advantages: Codpsx Af Rdofx Aiasgu + special rotor with reduced blade overhang, suitable for hard and soft materials + 22 kW motor + effective square blades *for pallets: up to a maximum of 10 pallets per hour *dependent on screen size and material. With smaller wood residues, significantly more. Motor: 22 kW; 400 V - 50 Hz - 3 phase, Screen: 15/20 mm or as agreed (10 to 40 mm possible) hydraulically operated slide Screen opening currently (15/20 mm) *can be exchanged Extraction nozzle Ø 200 mm. Feed opening 1000x1000 mm Dimensions: 2000x1800x1645mm Example image above: color of the system may vary Weight: 1920 kg. Included as standard: - Control cabinet with PLC control - automatic star/delta start - fast hydraulics - auto. OFF when the rotor is idle - speed 70-90 rpm for high throughput - cycle control to avoid idle times - performance-enhancing step control of the hydraulic slide - Pertinax guides for hydraulic slide - vibration-damping machine feet - CE compliant The following options are available at an extra cost: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,480 net - Inclined conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €6,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) - extended feed hopper 1500x1500 mm + €3,480 net Requirements for the raw material: - The moisture content (as received) must be below 25% - The feed must be free of metals and mineral contaminants. Damage to the tools and/or increased wear may result.

Condition: new, Year of construction: 2025, The ideal machine for shredding hardwood and softwood Another machine now available (ex-works Neckartailfingen). Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Blades: 14+2 pieces, 40x40mm, reversible multiple times, Rotor diameter: 260 mm, Control system: Omron PLC, Cgedpfxed E R D Ss Aiaou Cutting chamber opening: 600 x 800 mm, Hopper volume approx. 0.6 cbm, Hydraulically operated pusher Screen perforation of your choice (12 - 40mm) Extraction socket Ø 160 mm Weight approx. 1,300 kg Dimensions (LxWxH) approx. 1737 x 1167 x 1650 mm The following options are available at an additional cost: - Additional row of knives + €1,990 net (28 instead of 14) - Surcharge for segmented floor, 4-sided + €2,170 net (prevents the pusher from jamming. Recommended for materials with a thickness of less than 3 mm) - Raise shredder by 30 cm (preparation for conveyor belt) + €1,980 net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €5,980 net - Control system for the conveyor belt and overband magnet + €2,750 net (start and stop synchronized with the shredder) - Special bearing + €1,540 net (rarely required. Closed, even more robust rotor bearing. May be considered for screens smaller than 15 mm or high fine content. Not necessary if bearings are greased approximately every 2 weeks in operation) Requirements for raw material: - The moisture content (atro) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. increase wear. We are happy to offer a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via freight company and we will document the test with photos and videos.

Condition: new, Year of construction: 2026, The ideal machine for shredding softwood. Motor: 11/15 kW; 400 V - 50 Hz - 3 ph, Rotor diameter: 260 mm, Hydraulically actuated pusher Screen perforation to choice (12 - 40 mm) Extraction port Ø 160 mm Codpfxswzarco Aiasgu Weight approx. 1,100 kg Dimensions (LxWxH) approx. 1805 x 1118 x 1650 mm Colour: blue / grey Requirements for raw material: - Moisture content (atro) must be below 30% - Metal and mineral contaminants such as sand, stones, etc. lead to increased wear. We are pleased to offer a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material by freight and we will document the test with photos and videos.

Condition: as good as new (ex-display), Year of construction: 2025, showroom machine machine available Advantages: + special rotor with reduced knife protrusion + Motor 22 kW + effective square knife * for pallets: up to 10 pallets per hour * depending on the sieve and material. With smaller residual wood, significantly more. Engine: 22 kW; 400 V - 50 Hz - 3 ph, Sieve: 15/20 mm hydraulically operated slide Current screen perforation (15/20 mm) * can be exchanged Extraction nozzle Ø 200 mm. Feed opening 1000x1000 mm Dimensions: 2000x1800x1645mm Example image above: The color of the system may vary Weight: 1920 kg. Included as standard: - Control cabinet with PLC control - automatic star / delta start - fast hydraulics - automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - cycle control to avoid idle times, - performance-increasing step control of the hydraulic slide, - Pertinax guides for hydraulic slides, - vibration-damping machine feet, - CE conform. The following options are available at an additional cost: - Additional row of knives + € 2,790 - segment bottom + € 6,890 (recommended for materials with a wall thickness thinner than 3 mm) - Special K-rotor storage + € 3,480 If necessary, consider shredding plastic with sieves smaller than 15 mm or with a lot of fines. If the bearings are lubricated with grease every approx. 4 weeks in operation, this is not necessary) Cedpfxedv Eu Hs Aiaogu - Raise the shredder by 30 cm (preparation for conveyor belt) + € 2.480 net - Angled conveyor belt (discharge height approx. 220 cm) + € 12.980 net - Overbelt magnet + € 5.980 net - Control conveyor belt and overbelt magnet + € 2.750 net (Start and stop synchronized with the hacker) - Exhibition hopper 1500x1500 mm + € 3.480 net Requirements for the raw material: - The moisture content (atro) must be below 30% - The loading must be free of metals and mineral impurities. This can result in damage to the tools and / or increased wear

Condition: as good as new (ex-display), Year of construction: 2024, The ideal machine for shredding cables, including optimized cutting geometry, approximately 9 operating hours. Motor: 18.5 kW; 400 V - 50 Hz - 3 phase, Knives: 14 pieces, 40x40mm, multi-rotational, Csdpfogmfa Aox Aiajgu Rotor diameter: 260 mm, Control: Omron PLC, Cutting chamber opening 600 x 800 mm, Hopper volume approx. 0.6 m³, Hydraulically actuated slide Screen hole size optional (15 - 40mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (lxbxh) approx. 1737 x 1167 x 1650 mm The following options are available at an extra cost: - Double knife row + €1,990 net (28 instead of 14) - Surcharge for four-sided segmented base + €2,170 net (prevents the slide from blocking. Recommended when shredding plastics, paper, veneer with a thickness of less than 3 mm). - Raise the shredder by 30 cm (preparation for a conveyor belt) + €1,980 net - Angle conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €6,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) Bea9ia3l27 Requirements for the raw material: - Mineral impurities such as sand, stones, etc. lead to increased wear. We would be happy to offer a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material by freight forwarder, and we will document the test with photos and videos.

Condition: used, Shredding Machine MGZ 1330, 37 kW Operating hours: 275 Included: - Second knife row - Fast hydraulics for increased throughput - Preparation for conveyor belt Optional: - Conveyor belt with automatic metal separator Your advantages: + Extremely large cutting chamber opening; top: 1300x1200mm + Special rotor suitable for both hardwood and softwood + Energy-efficient and powerful, 37 kW start-up power Technical data: Feed opening, top (mm): 1,300 x 1,200 Hopper capacity (cbm): 1.6 m³ Rotor diameter (mm): 368 Rotor speed (rpm): 65 - 125 Power requirement (kW): 37 Screen hole size (mm): configurable Tools: 37/70 knives Extraction connection diameter (mm): 200 mm Cgjdpjx Tfdhjfx Aiaeu Dimensions: 2430x2410x1735 mm (LxWxH) Weight (approx. kg): 3,500 --- Feedstock requirements: - The moisture content (atro) must be below 20% - The feed material must be free of metals and mineral contamination. Damage to the tools and/or increased wear may result.

Condition: used, machine/vehicle number: 4038, functionality: fully functional, power: 2 kW (2.72 HP), input voltage: 380 V, input current: 9 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 80 mm, saw blade diameter: 330 mm, saw blade bore: 32 mm, actuation type: pneumatic, rotational speed (max.): 3,800 rpm, ELU Miter saw, model MGS 73 for aluminum and plastic profiles Saw blade 330 x 3.2 x 32 mm, Z = 96 (negative tooth angle) Cutting height approx. 80 mm, Miter setting left/right +/- 45°, 2 pneumatic clamps, horizontal, 2 pneumatic clamps, vertical, Motor 2 kW (2.7 HP), 380 volts, 50 Hz, pneumatic feed system with hydraulic feed brake, 2-hand operation: left: clamping and releasing, right: saw feed, cast iron table extension on the right with stop slider and measuring scale 0 - 3,000 mm Cgodpfxszbr Uze Aiaou without emergency stop switch!, without motor brake! as inspected, ex works Seevetal, excluding transport, subject to prior sale.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, The fully automatic Strapex SMG 25 strapping machine was manufactured in 2022 and features an arch size of 1650 x 500 mm. It processes straps with a width of 12 mm. Activation can be performed via the additional foot switch or the integrated foot switch on the machine. Strap tension is adjustable up to approximately 450N. With height-adjustable feet, the working height can be comfortably set between 720 and 950 mm. Included is an additional roll of PP strap. The original price is approximately €19,500. The device has been function-tested and comes with an electrical safety check conducted by a certified electrical company. Loading by forklift is possible. Net price: €11,000 negotiable Price is subject to 19% VAT. Cgodpfx Aijyuqnajaou Cash payment on collection is possible.

Condition: good (used), Centrifugal pump, high-pressure pump, water pump, multi-stage vertical centrifugal pump -Drive: 0.75 kW 2810 rpm -Max. flow rate: 9.0 m³/h -Max. pressure: 18 mWS -Quantity: 1 available -Dimensions: 380/225/H565 mm -Weight: 36 kg Csdpfx Ajcxq Atoiaogu

Condition: new, functionality: fully functional, Hirschmann OZD Profi 12M G12 Multimode converter 2-port - Signal converter Hirschmann OZD Profi 12M G12 : Transfer rate 500 kbps, Service primary side PROFIBUS, Connection type primary side other, Service secondary side PROFIBUS, Connection type secondary side D-Sub female 9-pin, Bidirectional yes, Overcurrent protection no, Galvanic isolation without, Rated current consumption 200 mA. Codpfx Aetvz D Eoiajgu Good working condition. Please check out our other listings as well.

Condition: excellent (used), Year of construction: 2012, Coordinate measuring machine for inline and prduction use from Mitutoyo in good condition, built 2012, installed 2014 Controller Mitutoyo UC240, Probe Renishaw PH10MQ/TP7, Software Mitutoyo MCOSMOS-1 V3.5 Measuring ranges: X – axis 905 mm Y – axis 1005 mm Z – axis 605 mm Accuracy acc. ISO 10360 MPEE = [2,5 + 3,5L/1000] µm at temperature range 18… 22 °C Base material Steel fixing holes M8 x 1,25 Scales Mitutoyo Linear Scales Scale Resolution 0,0001 mm DC motores with encoders Guideways linear guides Probe Renishaw PH10MQ with PHC10-2 plus (used) Probe Renishaw TP7 optional with ACR-3 (used) Computer Workstation WIN 10 (used) Cjdsh Nu Uhepfx Aiajgu or equipment on demand e.g. upgrade to Renishaw scanning probe Installation and Calibration € 5.000,-- plus travel expenses On demand: - SP25M + FCR rack instead of TP7 ( + € 12.000,--) - Upgrade PH10MQplus (€ 8.000,--)

Condition: used, mileage: 29,100 km, power: 140 kW (190.35 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,100 kg, first registration: 05/2025, emission class: euro6, color: red, suspension: steel, number of seats: 6, fuel: diesel, Equipment: ABS, air conditioning, airbag, central locking, navigation system, onboard computer, parking sensors, power assisted steering, seat heater, sliding door, soot filter, E07 Hill Start Assist, CF8 Sports Suspension, Z3N Night Package, Q50 Detachable Towbar (Ball Head), FB4 AMG Rear Spoiler Lip on Tailgate, F2W Winter Package, JA7 Blind Spot Assist, T56 Electric Operation for Left Sliding Door, T55 Electric Operation for Right Sliding Door, EY5 Mercedes-Benz Emergency Call System, BS1 Brake Calipers with Mercedes-Benz Lettering, EY6 Breakdown Management, B25 Electric Parking Brake, EI0 Wireless Charging System for Mobile Devices, LG4 LED Tail, Brake and Indicator Lights, XO7 Mercedes-Benz Mobilo with DSB and GgD, SE5 Lumbar Support Driver Seat, SE4 Lumbar Support Passenger Seat, QA4 Trailer Load 2500 kg, T70 Child Safety Locks on Passenger Doors, ZC6 Sales Identifier 1, T74 Entry Grab Handle, Y10 First Aid Kit, MJ8 ECO Start-Stop Function, IB6 Model Series C447 Vito/V-Class, 805 AEJ X4/1, VL7 AMG Floor Mats, H00 Warm Air Duct to Passenger Compartment, C6L Multifunction Steering Wheel, Z42 Registered as Passenger Car, C74 Illuminated Mercedes-Benz Entry Sill Inscription, J55 Seatbelt Warning Device for Passenger Seat, H16 Heated Seat for Driver, H15 Heated Seat for Passenger, XA8 Weight Variant 3,100 kg, RF1 Tire Brand: Continental (10), SH2 Thorax-Pelvis Sidebag for Passenger, SH1 Thorax-Pelvis Sidebag for Driver, SH8 Windowbags for Driver, Passenger and Rear Compartment, H20 All-round Heat-Insulating Glass, JW8 ATTENTION ASSIST, PS2 AMG Line, Y44 Warning Triangle, JX2 Maintenance Interval 40,000 km, YE2 Folding Table, FP3 Mirror Package, BH1 HOLD Function, SZ8 Stowage Net on Passenger Seat Backrest, SZ7 Stowage Net on Driver Seat Backrest, JH3 Communications Module (LTE) for Digital Services, X30 Vehicle Registration Certificate, Part II, W17 Fixed Front Right Window in Sidewall/Sliding Door, W16 Front Left Window.\n\nWe are available by phone Monday - Friday until 8:00 p.m. and Saturday until 4:00 p.m.!\nFurther information: Leasing/Financing and Trade-in possible!\nErrors and interim sale reserved!\nAll details without guarantee... see more on our homepage Cedpjyhmbcefx Aiaogu

Condition: used, Type: 6FC5135-0AA01-0AA0 Condition: NEW Cgsdpfjy S Dptjx Aiaju

Condition: excellent (used), Year of construction: 1993, OTT Model JU 2513 Hydraulic veneer press with electric heating plates Under-piston design BUSSE electric heating plates Central control panel with all operating elements Analog temperature display for both heating plates Pressing pressure infinitely adjustable via pressure switch device Main switch Two-stage hydraulic pump with automatic switching valve from low to high pressure Emergency safety pull cord Cedpfx Aoxgpaqjiasgu Rack compensation Stroke limitation CE compliant Press area: 2500 x 1300 mm Number of press cylinders: 4 Total pressing force: 70 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 20.3 kW Required space (L x W x H): approx. 2900 x 1250 x 1900 mm Weight: approx. 3200 kg

Condition: excellent (used), Advantages of the GF4: - Larger working range - Clamping jaws made of aluminum - Motor enables cutting of pipes made from very hard materials - 30% weight reduction due to new body design - Laser cutting position indicator - New ergonomic handle - Power cable with swivel and quick connector The GF4 machine can be operated with the AVM automatic rotation module. Technical specifications: - Pipe outer diameter [mm]: 12 - 120 - Pipe wall thickness [mm]: 1 - 9 - Minimum pipe inner diameter (63 mm blade) [mm]: 21 - Minimum pipe inner diameter (68 mm blade) [mm]: 16 - Minimum pipe inner diameter (80 mm blade) [mm]: 4 - Built-in electronic speed controller: 65 - 215 rpm - Power: 1.8 kW without AVM / 1.9 kW with AVM, 200-240 V, 50/60 Hz - Protection class: II - Vibration level (EN 2662, part 1): 2.5 m/s² - Noise level: 79 dB (A) The GF series machines are orbital pipe and elbow cutting machines. The pipes to be cut are clamped in a self-centering, prismatic vice, which prevents deformation. Pipe diameter and tool speed can be easily set via intuitive controls, depending on the material type. The cutting device is guided manually around the pipe, while the electrically driven blade cuts or bevels the pipe edge. Cgodeym Unzepfx Aiaju This is a planetary cutting method introduced by Georg Fischer. Orbital cutting is a time- and cost-saving process: - Perpendicular, flat, and burr-free cuts - Pipe ends prepared for various joining techniques without additional processing - Cold cutting - No overheating, preventing intergranular corrosion that could cause material cracking - Fast cutting - Saves time and money - Pipe edge beveling - Pipe ends can be beveled simultaneously during the cutting process or separately Optional parts: GF and RA machines can be supplied with either an automatic rotation module (AVM) or manual module (MVM). The AVM module continuously monitors cutting speed according to torque and set parameters. The MVM module, utilizing a gear and handle, enables effortless rotation of the machine head at a constant speed.

Condition: excellent (used), Year of construction: 2015, For sale is a functional and very well-maintained gas burner, brand WEISHAUPT WM-G20 (2600 kW), with a gas manifold DUNGS DN65. Csdpfezamgcsx Aiaegu 1. WEISHAUPT WM - G20 (2600 kW); two units available - Output: 350-2600 kW - Design: ZM - Year of manufacture: 2015

Condition: like new (used), Year of construction: 2013, For sale is a functioning and very well-maintained gas burner from the Weishaupt brand, including gas piping (Dungs DN 80). 1. Burner type: WM-G30 Output: 600-5700 kW Cgedszamd Uopfx Aiasu Design: ZM Year of manufacture: 2013 Connection pressure: 15-500 mbar