Shredding plant

mütek MGZ 1330

Condition: used, Shredding Machine MGZ 1330, 37 kW Operating hours: 275 Included: - Second knife row - Fast hydraulics for increased throughput - Preparation for conveyor belt Optional: - Conveyor belt with automatic metal separator Your advantages: + Extremely large cutting chamber opening; top: 1300x1200mm + Special rotor suitable for both hardwood and softwood + Energy-efficient and powerful, 37 kW start-up power Technical data: Feed opening, top (mm): 1,300 x 1,200 Hopper capacity (cbm): 1.6 m³ Rotor diameter (mm): 368 Rotor speed (rpm): 65 - 125 Power requirement (kW): 37 Ksdpfsx Tfdhsx Abcsdi Screen hole size (mm): configurable Tools: 37/70 knives Extraction connection diameter (mm): 200 mm Dimensions: 2430x2410x1735 mm (LxWxH) Weight (approx. kg): 3,500 --- Feedstock requirements: - The moisture content (atro) must be below 20% - The feed material must be free of metals and mineral contamination. Damage to the tools and/or increased wear may result.

Condition: used, mileage: 1,01,234 km, lifting height: 59,100 mm, Year of construction: 2017, operating hours: 1 h, Drivetrain Drive: Wheel Weights Empty weight: 48.000 kg Functional Lifting capacity: 8.000 kg Identification Serial number: Kdedpfx Aovl Dl Aebcsi Other information Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Tyre brand: - Carrier engine: - Upper engine: - Counterweight: 0 Transport dimensions (LxWxH): 16.85x2.75x3.99 Additional information Please contact PFEIFER GROUP for more information

Condition: like new (used), functionality: fully functional, power: 16.92 kW (23.00 HP), fuel type: gasoline, gearing type: hydrostat, Year of construction: 2024, operating hours: 75 h, Agria 5900 Taifun Professional Hydro equipment carrier Technical details: Kawasaki 2-cylinder four-stroke petrol engine 23hp with electric start Gearbox: stepless hydrostatic drive with single-disk dry clutch Speeds: Forward: 0-7 km/h, Reverse: 0 - 3.6 km/h Steering bar: rubber-mounted and height and side adjustable without tools Steering: power steering (handle active steering) Tires: 23 x 8.50 - 12 AS Standard equipment: tires, service and parking brake, operating hour meter, manual start, electric starter, socket Fuel: unleaded petrol Weight: approx. 221.00 kg Special features: Intuitive steering with minimal effort thanks to Holm active steering Patented easy-control control unit for intuitive control Powerful professional motors guarantee sufficient power for all attachments Portal axle for shifting the center of gravity depending on local conditions and the attachment used Clearly visible even in poor visibility conditions thanks to LED safety lighting Standard support foot for convenient parking of the machine without an attachment Hydraulic safety valve: for secure hold even on steep slopes Optimized air intake reduces sucking in of dirt and dust Central parking brake Stepless hydrostatic drive for ideal adjustment of the working speed Robust and low-maintenance construction for continuous use under the toughest conditions Standard with operating hour counter Agria mounting flange for positive and non-positive connection between the base and attachment Powerful motors guarantee fast work with professional attachments Easy movement of the machine even without the engine running by releasing the wheels Possible Attachments Green space management: mowing, mulching, baling and belt rake Soil management: reversing tillers, harrowing Property and path maintenance: weed removal, snow clearing, snow blowing, spreading, sweeping Woodland maintenance: chopping bushes Kdjdpfx Abev Ecdkecoi This Agria 5900 Cyclone Hydro tool carrier was built in 2024, has around 75 operating hours and has been used as a demonstration machine to date. The Cyclone is in as good as new overall condition, with minor signs of wear and tear, ready for immediate use. Sold as a used machine with no return, guarantee or warranty. Net price €18,479 // Gross price €21,990 - Inspection / test drive possible - Shipping costs €180 nationwide by freight forwarder! - Financing / leasing can be requested individually for you!

Condition: new, Year of construction: 2024, Magnetic separator for chip transport line Ksdpjcqvhwofx Abcedi Pipe magnet with 4 magnetic plates (permanent magnet) Hinged door for easy removal of metal parts Pipe diameter: 180 mm Location: From stock 54634 Bitburg - available immediately -

Condition: used, Year of construction: 2021, Lindner Urraco 95 DK – Year of Manufacture 2021 – Well-Maintained Condition For sale is a Lindner Urraco 95 DK from 2021 with 7,230 recorded operating hours. The shredder is in a well-maintained and ready-to-use condition. The exact condition can be seen in the photos. The machine is equipped with the DK4 package, featuring a reinforced gearbox and a reinforced cutting frame. — Specification / Scope of Delivery • 1 set of armoured shafts HW 8/10 with clearing combs and breaker bar, suitable for scrap and waste • 1 set of used shafts HW 8/10 with clearing combs and breaker bar, also for scrap and waste • DK4 package with reinforced gearbox and reinforced cutting frame — Technical Data – Lindner Urraco 95 DK Model: Lindner Urraco 95 DK Year of manufacture: 2021 Operating hours: 7,230 Engine power: approx. 566 kW (approx. 770 HP) Emissions standard: Stage V / Tier 4f (depending on version) Shaft length: approx. 2,500 mm Shaft diameter: approx. 870 mm Maximum torque: up to approx. 480,000 Nm Machine weight: approx. 46 t Dimensions (L x W x H): approx. 9.2 m x 2.55 m x 3.2 m Chassis: crawler tracks, hydraulically driven Application areas: scrap, commercial waste, bulky waste, mixed waste, wood, recycling material — Condition: Well-maintained machine Fully operational Kdodpfox Nkhqsx Abcji Sale as inspected on site Additional Information / Maintenance History The machine had a full maintenance and service contract directly with Lindner until recently. All maintenance and service work was carried out professionally in accordance with the manufacturer’s specifications and documented. Notes: • Sale is without any warranty or guarantee. • No return or renegotiation. • Subject to prior sale. All information provided is without obligation. The seller accepts no liability for possible errors, omissions, or changes in the details. Sale is exclusively subject to prior sale.

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: Machinenummer 230067.020, pressing force: 60 t, power: 45 kW (61.18 HP), operating pressure: 250 bar, Bollegraaf Recycling Solutions, the original manufacturer of this mobile Bollegraaf baler, hereby offers the following machine(s) FOR RENT ONLY: Year of construction: 2022 Weight excl trailer: 22.000 kg Mobile Baler Kedpfx Ajh I T Ibobcedi Volume capacity m3/hr max. 365 334 321 301 Volume weight kg/m3 max. 15 30 50 80 Weight capacity T/hr max. 5.5 10 16 24 Bale weight 400 – 800 kg, depending on S.G. of material and bale length Bale length - adjustable Bale height - 720 mm Bale width - 1100 m Filling opening - 1100 mm x 1320 mm Max. size supply - 1500 mm x 1200 mm Pressure force ram - max 60 tonf. Pressure force pre-press flap - max 25 tonnes Cycle time - 18 seconds Motor - 45 kW Motor Twistomat - 2.2 kW Motor counter pressure pump - 1.1 kW

Condition: good (used), Machinery from honey processing factory. DC Norris hotrooms, DC Norris settling tanks, DC Norris holding tanks, crystallised tanks, super seed tanks, pump, filter sets, various filling lines to fill squeezy bottles, glass jars and plastic buckets. Kedpfopcibmex Abcodi

Year of construction: 1977, condition: excellent (used), machine/vehicle number: 0392, Feeding width (mm): 500 Kdedpfjdt Rthex Abcei Kw: 7.5 A: 380

Condition: good (used), Year of construction: 2014, Pellet Press Manufacturer - TEKNO UNO Model - TK 304 Year - 2014 Ksdpfxsvdrtxj Abcjdi Motor Power - 50 kw Capacity - 450 kg/h

Condition: new, Parallel lathe with clutch and display Fervi T085F10 with mechanical clutch, 3-axis display and semi-norton gear box. Available with distance between centers also 2000 and 3000 mm. WITH MECHANICAL CLUTCH, 3-AXIS DISPLAY AND SEMI-NORTON GEAR BOX. EQUIPPED WITH JOYSTICK FOR ENTERING RAPID FEEDS. WITH SINGLE-BLOCK CAST IRON BASE. Technical data: Center height 280 mm Max. diameter over bed 560 mm Max. diameter over carriage 360 mm Max. diameter over pocket 770 mm Tool height 32 mm Distance between centers 1000 mm Bar passage 105 mm Spindle attachment Camlock D1-8 Kdedpfevbquijx Abcei Spindle speed (12) 36 - 1600 rpm Longitudinal feeds 0.063 - 2.52 mm/rev Cross feeds 0.027 - 1.07 mm/rev Metric threads (22) 1 - 14 mm Inch threads (26) 2 - 28 TPI Tailstock taper CM 5 Motor 400V 50/60 Hz 7.5 kW Coolant pump 400V 50/60 Hz 90 W Dimensions 2500 x 1400 x 1500 mm Net weight 2920 Kg Gross weight 3555.00 kg Accessories included: Self-centering chuck with 3 reversible jaws Ø 320 mm Platform with 4 independent jaws Ø 400 mm Flange Ø 600 mm Mobile steady rest Fixed steady rest Rotating tailstock CM 5 Thread comparator Lead screw protection Turret protection Spindle protection Rear splash guard Quick change turret type C LED lamp Cooling system Electro-mechanical foot brake Quick locking tailstock carriage Oil bath gears Adjustable leveling feet