Used Refrigerated Semi-Trailer for sale (21,082)

Condition: new, maximum load weight: 37,075 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment list. Full equipment details available on request. Gooseneck: * Gooseneck with front corners beveled approx. 45° and rear taper approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN). Hardwood floor approx. 30 mm thick Loading area: * Loading area after the gooseneck hydraulically liftable/lowerable, length approx. 2,800 mm, with rear taper approx. 1,000 mm x 8° * 6 pairs of folding outward lashing rings (LC 5,000 daN) * 2 pairs of folding outward lashing rings (LC 10,000 daN) * 1 pair of inward folding lashing rings at the front central beam (LC 10,000 daN) * Cutouts in the external frame of the loading area for attaching tension belts (LC 2,000 daN) * Grating surface C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm), over the axles checker plate Two-piece steel ramps: * One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with C40/4 grating (point load approx. 2.2 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically folding in/out ramp sections. Hydraulic lift system, hydraulically adjustable * Maximum load per pair: approx. 40,000 kg Landing gear: * JOST landing gear (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock via reverse gear and manual activation * Air suspension with lift and lower valve Brake system: * WABCO brake system according to EU regulations with EBS-E (2S2M) Tyres: 235/75 R 17.5 3PMSF – Manufacturer of our choice TPMS: * TPMS tire pressure monitoring system in accordance with ECE R 141 Paintwork: * HRM metalizing of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for optimal corrosion protection Fodpfjyhkqzox Afpsgd * Final paint in 2 coats of 2K topcoat, solid color in RAL 3002 Carmine Red in accordance with RAL system 841GL * Rims in silver grey Including accessories: * 2-inch kingpin * One galvanized steel front wall, approx. 400 mm high * Grating in the gooseneck taper C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * Grating in rear taper of the loading area C40/4 (point load approx. 3.4 t on an area of approx. 20 x 20 cm) * Non-slip sand paint on the checker plates above kingpin and loading area * Electro-hydraulic unit at the rear under the loading area * On the gooseneck: plug-in aluminium side walls and rear wall, approx. 2,440 x 400 mm (L x H). The rear galvanized drop-in stakes are removable. (Body length approx. 2,560 mm) * An electric cable winch with radio remote control, approx. 5,400 kg pulling force, including approx. 9.5 mm thick steel cable, approx. 24 m long, with cable guide pulley * Bolted 5 t ring for cable winch deflection on the neck without deflection pulley * One galvanized toolbox integrated in the beveled gooseneck with opening for a winch * Grating on the gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the loading area * Lift axle on the front axle with control via TEBS E depending on current axle load and loading condition * 7 pairs comple...

Condition: new, maximum load weight: 38,140 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from equipment. Full equipment details available on request. Gooseneck: - Gooseneck with front corners chamfered approx. 45° and rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, approx. 30 mm thick Loading area: - Telescopic loading area with rear incline approx. 1,000 mm x 8° - Between 1st and 2nd axle: one pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) - Incl. 3-piece removable galvanized cover over wheel recesses (width approx. 670 mm – max. point load 5 t / pc.) - 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) - 4 pairs of outward folding lashing rings (LC 5,000 daN) - 3 pairs of outward folding lashing rings (LC 10,000 daN) - Cutouts in the outer frame for attaching tie-down straps (LC 2,000 daN) Landing legs: - JOST landing legs (manual) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: - Tyres 235/75 R17.5 3PMSF, make at our discretion - TPMS tyre pressure monitoring system in accordance with ECE R 141 - Data transfer to the towing vehicle via standardised EBS interface as per ISO 11992 - For correct display, the towing vehicle must be able to receive and display this data Axles: - BPW axles and suspension, 2 axles rigid, 3rd axle self-steering - Technical axle load: 12,000 kg - Electromagnetic reverse lockout activated automatically when reversing and manually - Air suspension with lifting and lowering valve. Axle tools Braking system: - WABCO braking system according to EU regulations with EBS-E (2S2M) without piping to the tractor unit Electrical system: Fsdsw Tpq Dopfx Afpegd - Electrical system per EU regulations - LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX at front connection strip with 24N, 24S & 15-pin sockets, according to ISO; 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel construction: - Steel structure made of high-strength fine-grained steels - Steel qualities: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: - Complete steel structure automatically shot-blasted after welding in a wheel-blasting system - Second shot-blasting with corundum for optimum coating adhesion - HRM metallization of entire chassis with ZINACOR 850 (85% zinc/15% aluminium) for maximum corrosion protection - Final painting with 2 layers of 2K topcoat, single-colour in RAL 3002 Carmine Red, rear section metallized and painted in RAL 9010 Pure White - Metallic finish not available - Paint structure tested in salt spray test according to ISO 9227-NSS - Internal cavities sealed with special wax Including the following accessories: - On the gooseneck and rear, left and right, one holder for warning signs each, including socket - Spare wheel holder in front of the front wall (without spare wheel) - 2-inch king pin - Galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanized front connection bar - Galvanized folding supports under the inclination at the rear of the loading area - A hardwood crash protection strip at the rear wall from gooseneck to the loading area - 1 pair of recessed lashing rings along the central beam at the rear inclination (LC 10,000 daN) - Aluminium drop sides and tailgate on the gooseneck

Condition: new, maximum load weight: 33,865 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete range of vehicles, including those available for immediate delivery or on short notice, on our website. Below is an excerpt from the specification. The full equipment list is available upon request. Gooseneck: * Gooseneck with front corners chamfered approx. 45° and a rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Load area: * Double extendable design with rear bevel approx. 500 mm x 8° * 6 pairs of folding external lashing rings (LC 5,000 daN) * 4 pairs of folding external lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading area (LC 10,000 daN) * 1 intermediate table approx. 250 mm * Hardwood flooring approx. 48 mm thick, over axles with checker plate covering * Cut-outs in the external frame of the loading platform for attaching tie-down straps (LC 2,000 daN) Axles: * BPW axles and suspension, all axles forced-steered hydro-mechanically * Design axle load: 12,000 kg each * Air suspension with lift and lower valve * Axle tools included Tyres: * 245/70 R 17.5, load index (146/146 F) * Brand of our choice Landing legs: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Braking system: * Braking system according to EU regulations with EBS-E (2S2M) without connection lines to the tractor unit Paintwork: First-class and durable corrosion protection * High-quality, one-colour 2-component (2K) topcoat in RAL 3002 carmine red * Rear section metallized and coated in RAL 9010 (pure white) Steel Structure: Steel construction from high-strength fine grain steels. * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system according to EU regulations * 24 Volt lighting ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets, compliant with ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Including the following additional equipment: * 2-inch kingpin * Galvanized steel front wall, approx. 400 mm high * Yellow-red air couplings at the galvanized front connection strip * Spare wheel carrier in front of the front wall * Electro-hydraulic unit * Rear and front steering via cable remote control with push-buttons, with single-track monitoring of the axles (without installation in the tractor unit) * Mount at the rear of the gooseneck for aluminum loading ramps * Removable aluminum ramp hanging rail at the rear of the vehicle * Galvanized folding supports beneath the slope of the load area * On the gooseneck: plug-in aluminum side boards and rear board, approx. 2,440 x 400 mm (L x H) Fgodpfxew Tprzo Afpjd * The rear galvanized stanchions are removable (body length approx. 2,560 mm) * One galvanized toolbox, integrated in the chamfered gooseneck * 4 pairs of WADER container pockets in the loading area for one 20', two 20', one 40' or one 45' container * 8 pairs of stanchion pockets (approx. 100 x 50 mm) in the external frame of the loading platform * Galvanized extensions, extendable by approx. 230 mm per side * Adjustable hanging rails for aluminum ramps at the rear of the vehicle * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * Central lubrication system with 2 BEKAMAX (Pico) pumps, filled with standard grease NLGI-2 and removable pump guard * 2 LED reversing lights mounted on the rear panel * HRM Metallization (High Resistance Metallisa

Condition: new, maximum load weight: 39,720 kg, overall weight: 50,960 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Sample equipment features. Full specification upon request. Gooseneck * With beveled front corners approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approx. 30 mm thick Loading Platform Loading platform in extendable design * 5 pairs of fold-out outer lashing rings (LC 5,000 daN) * 3 pairs of fold-out outer lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) * Recesses in the outer frame of the loading platform for securing straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, over axles with chequer plate covering Landing Gear * JOST (mechanical) with 2-speed gearbox, approx. 24 t lift capacity (approx. 50 t test load) Axles * BPW axles: 2 fixed axles, 2 steering axles, drum brakes * Air suspension with lift/lower function * Self-steering axle with electro-magnetic reverse lock, activated via reverse gear or manually * Tires: 205/65 R 17.5 Brake System * Wabco brake system in accordance with EU directives with EBS-E (4S3M), without interconnecting lines to the tractor unit Steel Construction * Made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Paintwork * First-class, durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer * High-quality 2-component (2K) top coat, single-color, RAL 3002 Carmine Red * Rear section metallized and painted in RAL 9010 (Pure White) * Rims in silver Accessories Included * 2-inch king pin * Galvanized front steel bulkhead approx. 400 mm high Fgsdpfxou Sd U Us Afpjd * Spare wheel holder in front of bulkhead * Yellow-red air couplings on galvanized connector bar front * 4 wheel chocks with holder at bulkhead * Bracket at rear of gooseneck for aluminum loading ramps * Galvanized folding supports under inclined edge of loading platform * Holder for beacon at rear of trailer * Yellow reflective tape on sides, extension, and rear in accordance with EU regulations * Brackets for warning signs with socket on both sides at the gooseneck and rear panel * TPMS tire pressure monitoring system per ECE R 141. Data transmission to the tractor unit via standardized EBS interface according to ISO 11992; for correct display, the tractor unit must support data transmission and display * Plug-in aluminum side walls and tailgate on gooseneck, approx. 2,440 x 400 mm (L x H); rear galvanized stakes are removable (body length approx. 2,560 mm) * Galvanized toolbox, integrated in gooseneck slope * 6 pairs of WADER container locks in loading platform, for 1 x 20' container, 2 x 20' containers or 1 x 40' container * Sliding mounting rails for aluminum ramps at rear of vehicle * 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm, in the outer frame of the loading platform * Galvanized cross bracket under the loading platform * Galvanized extendable widenings, extendable approx. 230 mm per side * Lift axle on front axle, controlled via TEBS E according to current axle load and load status * 5 pairs of recessed lashing rings along the central beam (LC 5,000 daN)

Condition: new, maximum load weight: 37,075 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including immediately available and short-term delivery vehicles, on our website. Sample of the equipment. Full equipment details available on request. Neck (Gooseneck): * Gooseneck with front corners bevelled approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading Platform: * Loading area behind the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear bevel approx. 1,000 mm x 8° * 6 pairs of external foldable lashing rings (LC 5,000 daN) * 2 pairs of external foldable lashing rings (LC 10,000 daN) Fgedpfx Aoyhkrrefpjd * 1 pair of internal foldable lashing rings at the central beam front (LC 10,000 daN) * Cut-outs in the outer frame of the platform for hooking in tensioning straps (LC 2,000 daN) * Grating flooring C40/4 (point load approx. 2.3 t over an area of approx. 20 x 20 cm), treadplate flooring over the axles Two-piece Steel Ramps: * One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with grating surface C40/4 (point load approx. 2.2 t over an area of approx. 20 x 20 cm) * Ramp with hydraulically folding ramp sections * Hydraulic lift unit, hydraulically adjustable * Maximum load per pair: approx. 40,000 kg Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lift capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 fixed axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reversing lock automatic via reverse gear and manual activation * Air suspension with lift and lower valve Braking System: * WABCO braking system in compliance with EU regulations with EBS-E (2S2M) Tyres: Tyres 235/75 R 17.5 3PMSF – make at our discretion TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Paintwork: * HRM metallisation of the complete vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminium) to ensure maximum corrosion protection * Final coating with 2 layers of 2K topcoat, single-coloured in RAL 3002 Carmine Red as per RAL System 841GL * Rims in silver grey Accessories included: * 2-inch king pin * Galvanized steel front wall approx. 400 mm high * Grating in the gooseneck bevel C30/3 (point load approx. 2 t over an area of approx. 20 x 20 cm) * Grating in the platform bevel C40/4 (point load approx. 3.4 t over an area of approx. 20 x 20 cm) * Electric-hydraulic unit at the rear under the platform * Plug-in aluminium side and rear boards on the gooseneck, approx. 2,440 x 400 mm (L x H). Rear galvanized insert stanchions removable. (Body length approx. 2,560 mm) * Electric winch with radio remote control, approx. 5,400 kg lifting capacity, including approx. 9.5 mm thick steel cable, approx. 24 m long, with cable guide roller * Bolted approx. 5 t ring for winch cable loop on the neck without deflection pulley * One galvanized toolbox integrated in the sloped gooseneck with opening for a winch * Grating on the gooseneck C30/3 (point load approx. 2 t over an area of approx. 20 x 20 cm) * 7 pairs of stanchion sockets for plug-in stanchions, approx. 100 x 50 mm, in the outer frame of the platform * Lift axle on the front axle, controlled by TEBS E depending on actual axle load and current loading status * 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN): 2 pairs in the lift bed, 5 pairs in the rear section of the platform

Condition: new, empty load weight: 13,780 kg, maximum load weight: 26,000 kg, axle configuration: > 3 axles, suspension: steel, wheelbase: 3 mm, mileage: 150 km, power: 480 kW (652.62 HP), gearing type: automatic, emission class: euro6, fuel: diesel, load capacity: 12,220 kg, Equipment: Bluetooth, air conditioning, central locking, cruise control, fridge, onboard computer, rear view camera, HIAB MULTILIFT FUTURA 18T Telescopic arm 1400mm Stabilisers Radio remote control Skip stops Chains with 43 links BKGC hooks Hour meter Fgodpox Hkulsfx Afpjd Storage boxes Rockinger RO 50 hitch Aluminium mudguards Reversing camera Air conditioning Refrigerator Blind spot monitoring Multimedia touchscreen Bluetooth Sunroof Differential lock … Wheelbase 3400mm

Condition: used, empty load weight: 7,840 kg, maximum load weight: 30,160 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 08/2020, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, loading space volume: 91 m³, suspension: air, tire size: 385/65 R22,5, Year of construction: 2020, Equipment: tail-lift, Unladen weight: 7840 kg, Permissible total weight: 38000 kg, Cargo space (L W H): 13,620 mm x 2,480 mm x 2,700 mm, Tire size: 385/65 R22.5, Cargo space volume: 91 m³, 1st axle: , 2nd axle: , 3rd axle: , Air suspension, Front lift axle, Tail lift: DHOLLANDIA. You will find an overview of all our available vehicles on our website. Need financing? We offer customized financing options, as well as full-service or telematics services. We will be happy to provide you with personal advice. Fedpfozg Nvrox Afpegd

Condition: used, empty load weight: 6,400 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 02/2022, suspension: air, tire size: 385/65 R22,5, color: black, Year of construction: 2022, Equipment: ABS, Poids à vide: 6400kg, Poids total admissible: 38000kg, La taille du pneu: 385/65 R22.5, 1er essieu: , 2ème essieu: , 3ème essieu: , Suspension pneumatique, Dispositif anti- encastrement, Essieu relevable avant, Système de freinage électronique EBS, Porte-extincteur, Coffre à outils, Fiche de raccordement 1x15 et 2x7 broches, Disques de frein Essieu 1 43,1mm Plaquettes de frein Essieu 1 10% usure Disques de frein Essieu 2 41,5mm Plaquettes de frein Essieu 2 50% usureDisques de frein Essieu 3 42,1mm Plaquettes de frein Essieu 3 80% dusureMines 03/2027 -, Vous trouverez un aperçu de tous nos véhicules disponibles sur notre site web . Besoin d’un financement ? Nous proposons des financements individualisés, ainsi que du full-service ou un service télés serons heureux de vous conseiller personnellement. Fsdpoyzuf Dofx Afpjgd

Year of construction: 2023, condition: new, Lightest Semi Trailer Concrete Mixer in the world with capacity of 12 m³. Fgsdpfx Afjgavdvspjd

Year of construction: 2023, condition: new, Lightest Semi Trailer Concrete Mixer in the world with capacity of 12 m³. Fgsdpjgavbhjfx Afped

Year of construction: 2023, condition: new, Lightest Semi Trailer Concrete Mixer in the world with capacity of 12 m³. Fedpfx Asgavc Hofpsgd

Year of construction: 2023, condition: new, Lightest Semi Trailer Concrete Mixer in the world with capacity of 12 m³. Fsdpfx Afegavdrjpegd

Year of construction: 2023, condition: new, Lightest Semi Trailer Concrete Mixer in the world with capacity of 12 m³. Fsdegavdnopfx Afpogd

Condition: excellent (used), first registration: 05/2013, total length: 1,23,500 mm, total width: 2,550 mm, total height: 900 mm, color: blue, Year of construction: 2013, Unladen weight: 9,100 kg Payload: 48,900 kg Gross vehicle weight (GVW): 58,000 kg Technical condition: very good Fedpjyuphfofx Afpjgd Visual condition: very good 4 air-suspended axles 2 steered axles, 1 lift axle 10,000 kg per axle Technically permissible total weight: 58,000 kg Tyre size: 245/70 R17.5 Loading platform length: 855 cm + 335 cm gooseneck Loading platform width: 255 cm Loading platform height: 90 cm Lashing rings and round tie-down points

Year of construction: 2023, condition: new, Lightest Semi Trailer Concrete Mixer in the world with capacity of 12 m³. Fjdjgavc Repfx Afpegd

Year of construction: 2023, condition: new, Lightest Semi Trailer Concrete Mixer in the world with capacity of 12 m³. Fgsdpfx Afsgavc Uopjd

Condition: used, empty load weight: 8,270 kg, maximum load weight: 34,000 kg, axle configuration: 3 axles, first registration: 08/2007, total length: 13,450 mm, total width: 2,500 mm, total height: 3,000 mm, suspension: air, tire condition: 50 %, load capacity: 25,730 kg, • CARRIER Maxima 1300 • 1st axle liftable • Spare wheel carrier Fedpfx Aeyxhw Ijfpegd • Hydraroll • Internal dimensions: 13.45 x 2.50 x 3.00 m

Condition: used, empty load weight: 8,700 kg, maximum load weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2014, total length: 13,400 mm, total width: 2,460 mm, total height: 2,600 mm, suspension: air, load capacity: 30,300 kg, • THERMO KING SLXe 400 • Diesel + electric Fgodpfxjy A Tuto Afpsd • 3,685 operating hours • Partition • 13.40 x 2.46 x 2.60 m

Condition: used, empty load weight: 8,700 kg, maximum load weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2014, suspension: air, load capacity: 30,300 kg, • THERMO KING SLXe 400 • Diesel + electric Fgjdpfxsyzkmdj Afpjd • 6,173 operating hours • Partition wall • 13.40 x 2.46 x 2.60 m

Condition: used, empty load weight: 8,700 kg, maximum load weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2014, suspension: air, load capacity: 30,300 kg, • THERMO KING SLXe 400 • Diesel + electric • 6,290 operating hours • Partition Fgodpfsx Hk Acox Afpod • DHOLLANDIA tail lift 2,000 kg • 13.40 x 2.46 x 2.60 m

Condition: used, maximum load weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2014, suspension: air, • THERMO KING SLXe 400 • Diesel + electric • 1,475 hours • Partition wall • DHOLLANDIA tail lift 2,000 kg • 13.40 x 2.46 x 2.60 m Fsdjx Hkynepfx Afpsgd

Year of construction: 2023, condition: new, Lightest Semi Trailer Concrete Mixer in the world with capacity of 12 m³. Fgjdpfogavcbjx Afpod

Year of construction: 2023, condition: new, Lightest Semi Trailer Concrete Mixer in the world with capacity of 12 m³. Fgjdogavdyepfx Afped

Condition: used, empty load weight: 8,730 kg, maximum load weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2014, suspension: air, load capacity: 30,270 kg, • Fridge hours: 5,263 h • CARRIER Vector 1550 • 1st axle liftable • Spare wheel holder Fgjdpfx Afsy Diwyspod • Internal dimensions: 13.40 x 2.45 x 2.65 m

Condition: used, empty load weight: 8,000 kg, maximum load weight: 34,000 kg, axle configuration: 3 axles, first registration: 12/2010, suspension: air, tire condition: 20 %, load capacity: 26,000 kg, CARRIER Vector 1850 Spare wheel holder Fedpsx Hkt Iofx Afpogd Disc brakes Diesel hours: 3750 h Operating hours: 7600 h