Used Wmt Wmt 117 for sale (1,188)

Condition: new, pressure 60 t stroke 400 mm Fpsdjgg Nn Sjpfx Aatjl daylight longitudinal/sideways 820 x 300 mm dayligth 900 mm liter capacity 6,5 l feed down 6,1 mm/sec feed up 10 mm/sec Motor output 2,2 kW weight of the machine ca. 0,675 t dimensions of the machine ca. 1,46 x 0,85 x 2,1 m Presses can be operated both by hand and by motor. Cylinders can be moved sideways. Safety valve with cylinder end position. CE marking

Condition: ready for operation (used), Bosch SD-B4.070.030-00.000 servomotor, serial number as shown in the photo, hole spacing of the mounting holes: 117 x 117 mm, drive shaft diameter: 24 mm, used, minor signs of wear, 100% functional, scope of delivery as shown in the photos. Fpjdpei D E Tljfx Aatjl

Condition: used, mileage: 1,20,572 km, power: 132 kW (179.47 HP), first registration: 06/2021, fuel type: diesel, overall weight: 7,200 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 8,800 mm, total width: 2,550 mm, total height: 3,500 mm, loading space length: 6,000 mm, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Subject to errors and prior sale! Internal number: 1330.5409538 ----EQUIPMENT * Storage: Central storage compartment - with USB charging port * Dual tires on the rear axle * Bodybuilder interface with expansion module * Air conditioning in the driver's cab with automatic climate control - including pollen filter and outside temperature display - including 170 cm³ air conditioning compressor * SAXAS box body with 600 cm loading area length * 117 l fuel tank * Tail lift * Steering wheel: Steering column adjustable in 2 positions - height and tilt * Air suspension on the rear axle * Radio: DAB digital radio - Digital radio with high-speed dual tuner - Voice recognition, USB port, Bluetooth - Hands-free system - Multifunction steering wheel * Rear cross member Fpsdort Smispfx Aatsl * Cruise control * 20 l AdBlue tank * Driver's airbag with belt tensioner * Comfort dashboard - Blue applications on the dashboard and door panels - Map storage and cup holders, as well as a foldable document compartment in the center console * Electrically adjustable and heated exterior mirrors with wide-angle mirrors and integrated turn signals * Seat: Passenger seat with three-point belt for the center seat * Diesel particulate filter - controlled by EDC - Catalytic converter with SCR * Digital EC control unit DTCO 4.0 * Torsion bar suspension on the front axle - front axle load increased to 2100 kg * Tachometer * Electric windows, left and right * Transmission: 8-speed automatic transmission with 8-speed torque converter ZF 8 HP including gear indicator * Driver's seat headrest adjustable for height, angle, and length * Heated crankcase ventilation * Radiator grille with chrome inserts * Paint finish: Solid color * Manual headlight range adjustment * Model designation on both sides * Upholstery: Fabric * Rear window in driver's cab * Rear panel trim in driver's cab * Power steering * Front mud flaps * TFT display in instrument cluster Color * Trailer socket preparation * Maintenance indicator * Electronic immobilizer * Tinted windshield and cab side windows * Central locking with remote control ... and much more ----The vehicle is unfinished! Nationwide delivery is available for an additional charge. Errors and prior sale excepted. We are happy to accept your vehicle as part payment. Financing/leasing also possible without a down payment! Do you have any questions? We'd be happy to advise you!

Condition: new, width of the strips 100 mm band length 2000 mm Fedpfx Aaoupw Rijtspl band speed 15/30 m/sec tube diameter 20 - 76 mm angle adjustable from - to 30 - 90 Grad connected load frequency 400 V total power requirement 2,5 /3,3 kW weight of the machine ca. 0,19 t dimensions of the machine ca. 1,2 x 0,75 x 0,7 m

Condition: new, capacity 90 degrees: round 305 mm capacity 90 degrees: square 260 mm 350x200 saw band length 3375x27x0,9 mm band speed 18 - 100 m/min table height 880 mm Fjdpfxeupw R As Aatjpl total power requirement 1,5/1,8 kW weight of the machine ca. 0,84 t dimensions of the machine ca. 1,85 x 1,9 x 2,0 m Demonstration system for a SPECIAL PRICE!! Fully automatic miter band saw • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start recognition) • Frame and gear made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to enter various parameters such as quantities and material lengths, automatic calculation of the cutting channel • CNC control for 10 different saw programs with 99 sub-programs for different lengths and quantities, e.g. 1 cutting program with various section lengths • Automatic feed unit (CNC) via ball roller spindle incremental feed with automatic length compensation. Adjustable for section lengths of 2 mm to 9,999 mm, remainder length 170 mm. Inclusive: - Micro-spray device - Leveling elements

Condition: new, capacity 90 degrees: round 125 mm capacity 90 degrees: square 125 mm 127 x 125 mm dimensions of saw-band 1435 x 12,7 x 0,65 mm band speed 38 - 80 m/min total power requirement 0,95 kW weight of the machine ca. 18 kg dimensions 720 x 380 x 450 m Fjdpfx Aeupw R Njatopl Both straight and miter cuts can be made at angles between 45 and 90 degrees. With the metal band saw you not only work precisely, but also quickly: the band speed can be variably adjusted between 38 and 80 meters per minute. With a weight of only 25 kilograms, the saw can be used mobile.

Condition: new, bore capacity in steel (diameter) 16 mm throat 180 mm bore stroke 85 mm spindle taper MK 2 spindle diameter 47 mm spindle turning speed range 320 - 3300 U/min 230 mm 100 mm Fodpfx Aajupxcyotspl table surface area 420 x 155 mm connected load frequency 230 V 900 x 600 x 300 cm total power requirement 0,75 kW weight of the machine ca. 8o Kg dimensions 0,7 x 0,7 x 0,8 m Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank

Condition: new, material width 1015 mm material thickness 1 mm speed von Hand Fpjdoupxdkspfx Aatjl weight 240 Kg dimensions 1420 x 600 x 750 m

Condition: new, Year of construction: 2026, SCV15000TC VIBER BIG-BAG is a professional industrial dust extraction system designed for large woodworking facilities and industrial production lines. Equipped with two high-capacity BIG-BAG containers, it ensures maximum operational continuity and simplified handling while minimizing downtime. It is an ideal solution for extracting sawdust and dust from high-demand machinery requiring highly efficient air filtration. Key Advantages Capacity of 15,000 m³/h – ensures effective extraction even in the most demanding industrial applications 18.5 kW power output – high-efficiency S1-duty motor designed for continuous operation in harsh conditions VIBER system – automatic filter shaking system extending filter lifespan TC housing – fully sound-insulated enclosure reducing noise and vibration Two BIG-BAG containers – significantly increased waste capacity and more convenient unloading REHEAT – heat recovery system from exhaust air, reducing energy losses DAMAGE PROTECT – mechanical protection of the impeller and suction duct against damage caused by large objects Construction and Technology The SCV15000TC VIBER BIG-BAG is built on a rigid steel structure designed for intensive use in demanding industrial environments. The chip extraction fan features a dynamically balanced impeller with aerodynamically optimized blades, ensuring consistently high performance with low noise levels. The filtration unit consists of 117 polyester filter cartridges with a filtration surface area adapted to intensive dust extraction processes. Precision and Performance Thanks to high vacuum pressure and a large inlet diameter (400 mm), the extractor efficiently removes chips, dust, and sawdust from multiple workstations simultaneously. The design allows operation as a central extraction system, enabling full integration with an entire production line. High energy efficiency and the automatic filter cleaning system significantly reduce the need for frequent servicing, lowering operating costs. Applications The SCV15000TC VIBER BIG-BAG is recommended for operation with: panel saws and sliding table saws Fpedpfjup Difox Aatsl wide belt sanders edge banders and CNC milling machines automated woodworking and wood-based material processing lines Standard Equipment VIBER automatic filter cleaning system Polyester filters (117 pcs) TC sound-insulated housing DAMAGE PROTECT protection system Control cabinet with main switch Two BIG-BAG containers with support frames Optional Equipment HEPA filters for particles below 5 microns Bag fill level sensor Automatic shut-off valve Spark detection and fire suppression system Technical Specifications Power supply voltage: 400 V Motor power: 18.5 kW Rotational speed: 3000 rpm Filter type: Polyester, 5 microns / filter category “G” Filter dimensions: Ø160 × 960 mm Filtration area: 59 m² Number of filters: 117 pcs Inlet diameter: 400 mm Capacity: 15,000 m³/h Vacuum pressure: 3000 Pa Air velocity: 40 m/s Noise level: 80 dB Number of BIG-BAGs: 2 pcs BIG-BAG capacity: 1250 L each / 2500 L total Dimensions (L × W × H): 3850 × 1500 × 3800 mm Weight: 1150 kg

Year of construction: 1960, condition: used, R.A.S. Rotary Turning Press Type 200-20 Machine No. 117/6 Stroke 200 mm Pressing force 20 t Fodpfx Asic Rn Usatepl Spindle diameter 60 mm

Condition: good (used), The scope of delivery includes: 1x used shelf connector Manufacturer: Nedcon Type: NS Material color: orange Head plate dimensions: approx. 140 x 117 mm for a shelf spacing of: approx. 500 mm Suitable for a frame profile: 120 mm Fsdpji Euu Rsfx Aatjpl Profile dimensions: approx. 60 x 40 mm Borehole diameter: approx. 10 mm Weight: 1.75 kg/piece.

Condition: new, Year of construction: 2024, == Exhibition Machine == ALZMETALL Pillar Drilling Machine ALZSTAR 40 SV with coolant system B (Option 25) Fpsdpfx Aed Hy Elsatjl (consisting of a separate container (33 l), pump with motor protection switch, complete valve assembly) and LED machine light standard equipment: mushroom push button, reversing switch (for clockwise and counterclockwise rotation), motor protection switch speed adjustment stepless, digital speed display, feed overload protection, protection class IP54, connecting plug spindle protection with electrical protection technical data: drilling capacity steel E335 (St 60) 40 mm thread cutting: steel E335 (St 60) M 24 cast iron EN-GJL-200 (GG20) M 30 short spindle MK 3 spindle stroke 120 mm overhang 293 mm column diameter 115 mm machine table, usable support area 514 x 360 mm T-slots, number x width x spacing 2 x 14 x 224 mm distance spindle-table min./max. 117/701 mm feed 0.10 + 0.20 mm/rev machine height without options approx. 1840 mm net weight approx. 285 kg drive stepless motor 1500 / 3000 rpm power 1.45 / 1.9 kW spindle speed 160-2250 rpm

Condition: new, Load Weight Shelf 15000 kg Fpjdpjfgyg Eofx Aatjl Loading weight per level 3000 kg Number of load levels 5 Stk. Recommended material length 6000 mm Column width 2 x 2000 mm Shelf height 2440 mm

Condition: new, Load Weight Shelf 30000 kg Loading weight per level 3000 kg Number of load levels 2 x 5 Stk. Recommended material length 6000 mm Fjdpjfgyhbefx Aatjpl Column width 3000 mm Shelf height 2440 mm

Condition: new, capacity 90 degrees: round 172 mm capacity 90 degrees: square 170 mm 170 x 170 dimensions of saw-band 2035 x 20 x 0,9 mm dimensions 430 x 960 x 520 m band speed 30 - 80 m/min total power requirement 1,5 kW weight of the machine ca. 38 kg SPECIAL PRICE!! Berg & Schmid - Assembly band saw PBS 171 ESC Fedpofgyhzjfx Aatspl Powerful and particularly robust metal band saw Aluminum die-cast saw table and infinitely variable cutting speed for Miter cuts up to 60° Optional: machine base type 20508

Condition: new, cutting diameter 220 mm saw band length 2450 x 27 x 0,9 mm table height 915 mm band speed 35 + 70 m/min connected load frequency 400 V capacity 90 degrees: round 220 mm capacity 90 degrees: square 210 x 210 mm capacity 90 degrees: flat 230 x 185 mm Fodpofgyh Nofx Aatspl total power requirement 1,2 kW weight of the machine ca. 240 kg dimensions of the machine ca. 870 x 1550 x 1740 mm The Zimmer Z241/R is a self-lowering saw for miter cuts from 0 ° - 60 ° left. After the cut, the machine stays through one Safety limit switches stand. The reduction is infinitely variable Hydraulic system adjustable. The saw arm can be raised after the cut any position. The saw arm remains at the desired position stand. The Z241 / R has the following features: Hydraulic cylinder, emulsion pump, eccentric tensioner, base, saw band, 400V Connector -16A- The machine is completely assembled and delivered ready for use.

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm Fodsfgyh Tepfx Aatjpl 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 950 mm band speed 18 - 110 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 0,42 t Double miter metal band saw, GBS 250 Super AutoCut - Miter cuts up to 60° left and 45° right - Ball bearing turntable - Quick release vice - Massive, large material support - Automatic cooling

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 450x320 saw band length 4250x34x1,1 mm band speed 40 + 80 m/min table height 845 mm Fsdpsfgyicefx Aatspl saw band width 34 mm total power requirement 2,2 kW weight of the machine ca. 0,985 t dimensions of the machine ca. 1,4 x 2,0 x 2,2 m Double miter band saw, hydraulic semi-automatic, DGS 350/450 HA-I · miter left + right 60° without machine conversion · 34 mm saw blade width · Large material support turntable, ball bearings · To position the saw blade guides using a very wide linear guide · Strong, robust transmission · Large chipboards · Infeed and outfeed roller Removable chip tray (disinfection) · Free-standing control panel, safe and ergonomic · Storage space for tapes, consumables · Cutting pressure regulator Feed regulator · Fully hydraulic vise Preload super fast (front loading) · Material height sensor (automatic cut start detection) Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise Optimum, material-independent cutting result through fine adjustment of the saw frame by means of: *Pressure Control Valve (Cutting Pressure Force) *Feed Control Valve (Speed) *Switch with pictogram, easy and clear to use

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 820x610 saw band length 5850 x 41 x 1,3 mm band speed 15 - 100 m/min table height 800 mm total power requirement 5,5 kW weight of the machine ca. 4,45 t dimensions of the machine ca. 5,85 x 3,6 x 2,7 m 2-column band saw for quick cutting, K-tech 800H with pusher system P 15. P 30 (option), Fast, quiet and ergonomic cutting Special development for cutting profiles and beams as well as solid material. The material is fixed vertically on and section sides. The machine is from K-tech 800 H standard with an additional horizontal vice equipped. The interaction of the hydraulic Saw frame lowering, material positioning and the Pusher system is CNC controlled. The machines come standard with the environmentally friendly “B&S-Clean Cut cutting system” with minimal quantity lubrication equipped. This saves cleaning effort and is gentle Resources. CNC Control A CNC control allows programming of up to up to 90 cutting programs with different cut lengths, Quantities and mitres. The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is Fpodpjfgyifofx Aatel separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 1250x600 saw band length 8140x54x1,6 mm band speed 15 - 90 m/min Fodpfx Aajfgyigjtepl table height 855 mm total power requirement 7,5 kW weight of the machine ca. 4,96 t dimensions of the machine ca. 5,7 x 4,0 x 2,75 m 2-column band saw for quick cutting, K-tech 1200H with pusher system P 30. P 60 (option), Fast, quiet and ergonomic cutting Special development for cutting profiles and beams as well as solid material. The material is fixed vertically on and section sides. The machine is from K-tech 800 H standard with an additional horizontal vice equipped. The interaction of the hydraulic Saw frame lowering, material positioning and the Pusher system is CNC controlled. The machines come standard with the environmentally friendly “B&S-Clean Cut cutting system” with minimal quantity lubrication equipped. This saves cleaning effort and is gentle Resources. CNC Control A CNC control allows programming of up to up to 90 cutting programs with different cut lengths, Quantities and mitres. The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 820x610 capacity 45 degrees: round 550 mm capacity 45 degrees: square 550 mm capacity 45 degrees: flat 550x600 mm capacity 60 degrees: round 370 mm capacity 60 degrees: square 370 mm capacity 60 degrees: flat 370x600/450 mm saw band length 7260 x 41 x 1,3 mm band speed 15 - 100 m/min table height 800 mm total power requirement 5,5 kW weight of the machine ca. 4,8 t dimensions of the machine ca. 5,85 x 3,7 x 2,7 m 2-column double miter band saw for quick cutting with pusher system P15. Option P30 Hydraulic saw frame lowering • NC controlled • Automatic angular positioning from + 60° to – 60° High quality automatic miter adjustment Special development for cutting profiles and beams. The highest positioning accuracy is achieved via the new “B&S positioning system”. reached. An intelligent NC control ensures smooth interaction of linear encoder and self-braking positioning motor in conjunction with a reliable hydraulic brake using large radial center positioning. The work table is supported by high-quality preloaded bearings, which ensure very smooth rotation. CNC Control A CNC control allows the programming of up to 90 cutting programs with different section lengths, quantities and mitres. Positioning system gripping on both sides The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor. Fpjdpfx Aefg E Hmjatel

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min Fsdpfx Aasfg E Hpotjpl total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: new, 355 mm 350 x 350 mm Fpsdpfxsfg E Hzs Aatsl saw band length 4640 x 34 x 1,1 mm table height mm band speed 15 - 115 m/min total power requirement 4,0 kW weight of the machine ca. 2,8 t dimensions 3,1 x 2,2 x 2,2 m Shark 350 NC HS 5.0, automatic hydraulic band saw machine in two Column construction for 0° cuts on solid material and steel profiles, Stainless steel and steel alloys up to a maximum of 350x350 mm. The standard equipment includes: + Powered chip conveyor, can be installed on the right or left of the machine. + Clamping pressure regulation of the vices. + Feeder with vertical rollers for lateral material support. + Numerically controlled band saw machines, which are also operated semi- automatically can be done with the new MEP 50, especially from MEP for automatic Machine developed, Windows “CE” based control. + Cutting cycle “clean cut” The feeder pushes the workpiece at the back to avoid scoring on the cutting surface when the tape moves up again at the end of the cut. + Fieldbus communication system with double microprocessor and serial Connection. + The user interface with 7” touch screen display and mechanical Buttons are used to ensure the operating functions of the sawing machine reliable, simple and intuitive use, as well as a Real-time control of all cutting parameters

Condition: new, cutting diameter 250 mm saw band length 2950 x 27 x 0,9 mm table height ca. 800 mm band speed 36/72 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 0,37 t MEP sawing machine: Saw band bow, vice unit and base made of durable cast iron Precision grade marking on the cast iron structure Fjdpfx Ajfg E H Isatjpl Electrical system (with fully identifiable electrical wiring and Low voltage system 24 V) Switch handle IP 55 for manual cycles (if available) Rotating scraper brush for the saw band Clamping unit with vice for quick approach Accurate stops with adjustment for miter cuts at 0°, 45°, 60° left Bi-metal saw band 2950 x 27 x 0.9 mm Keys, instructions for use and instructions for ordering spare parts in the User language SHARK 281 with manual operation and SHARK 281 CCS with manual operation and cutting with automatic head feed by its own weight. CCS (Cut Control System) with (A switch for manual and automatic Cutting – B) Cutting speed regulation – C) Hydraulic brake with tank – D) End stop for stopping the belt) also optional for already produced machines available. Vice with quick adjustment Hydraulic converter for belt tension display Electric coolant pump for cooling and lubricating the saw band and manageable coolant tray above the base frame In the versions with a pneumatic vice (MA), the opening takes place and Closing the vise with a manual valve (with pedal control as option available)

Condition: new, cutting diameter 250 mm saw band length 2950x27x0,9 mm band speed 36/72 m/min total power requirement 1,8 kW weight of the machine ca. 440 kg Basic equipment: Vice with quick adjustment and adjustable guide bars Hydraulic band tensioning device with tensioning pressure display Base frame with removable coolant tray Fpsdpfx Ajfg E H Noatsl Chip clearing brush Precision stops set for cuts of: 0°, 45° and 60° left and 45° right Turntable for double miter cuts Electric coolant device 48 V (A micro spray device can be installed)