Used Bb Spring (Babbio) Cnc 800 for sale (22,204)

Year of construction: 1995, condition: ready for operation (used), A defective CNC spring coiling machine BB Spring (Babbio) is available. Wire thickness range: 3mm-8mm, max. outer diameter: 120mm, wire processing speed: 90m/min, power: 35kW, machine dimensions X/Y/Z: approx. 2750mm/3150mm/2700mm, weight: approx. 4000kg. Including a winch plate for winching left springs and a torsion spring device. The motor and drive of the machine are defective. Documentation available. Lsdevripmjpfx An Iead

Condition: new, Year of construction: 2023, Technical specs CNC – 800 Control Syntec Drive system YASKAWA servo drive Main motor 7,5 Kw Spindle speed till 7000 Rpm Max drilling dept 800 mm Ledpfx Ask N Dtusn Ioad Drilling diameter 2,5 till 30 mm X stroke 800 mm Y stroke 800 mm Z stroke 800 mm cutting feed 300 mm/min spindle speed 7000 Rpm spindle motor Servo 11 Kw X servo motor 3,9 Kw Y servo motor 3,9 Kw Z servo motor 3,1 Kw oil pump motor 5,5 Kw oil pressure 21 bar table loade 6000 kg machine weight 8,3 ton machine power 34 Kw. Machine size 4,2 x 3,5 x 2.6 meter Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller CNC Top Ten bv Coevorden, Netherlands

Condition: good (used), Year of construction: 2006, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 30,000 m/min, feed rate Z-axis: 30,000 m/min, controller manufacturer: HeidenHain iTNC530, total height: 3,200 mm, total length: 3,200 mm, total width: 2,400 mm, table width: 600 mm, table length: 600 mm, table load: 500 kg, overall weight: 10,000 kg, spindle speed (max.): 20,000 rpm, spindle motor power: 18,000 W, 5-axis CNC machine (VMC) MIKRON - UCP 800 MACH-ID 9640 Make: MIKRON Type: UCP 800 Control: HeidenHain iTNC530 X - Travel: 800mm Y - Travel: 650mm Z - Travel: 500mm A - Axis: +120 to -100° B - Axis: 360.000° Table Length: 600mm Table Width: 600mm Table load: 500 Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Spindle Taper: HSK63ISO/Bt/Mk Power on spindle: 18kW Speeds / ranges: 20000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 5 Chip conveyor: yes Coolantsystem: yes Length: 3200mm Lasdpfszkry Ijx An Ijd Width: 2400mm Height: 3200mm Weight: 10000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: like new (used), Year of construction: 2025, functionality: fully functional, grinding width: 550 mm, grinding height: 580 mm, distance table to spindle center: 680 mm, table load: 1,000 kg, table width: 800 mm, grinding wheel width: 57 mm, spindle speed (max.): 1,500 rpm, overall weight: 6,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, CNC Rotary Table Surface Grinding Machine ROSA ERMANDO CNC 800 – LIKE NEW (2024) For sale is a state-of-the-art CNC rotary table surface grinding machine, ROSA ERMANDO CNC 800, manufactured in 2024 and in like-new condition. The machine comes from an industrial application (Syntegon) and has been used very little. It will be available and ready for operation from January 2027. Thanks to the Siemens Sinumerik ONE control system and its extensive features, this machine is ideally suited for precise grinding operations in the tool, mold, and machine tool industries. ⚙️ Technical Data Manufacturer: ROSA ERMANDO Type: CNC 800 Year of Manufacture: 2024 Control System: Siemens Sinumerik ONE (Rosa System 9 Touch) Axes: 3 Travel: X: 550 mm Y: 680 mm Grinding Wheel: 400 x 57 x 127 mm Spindle Power: 11 kW Max. Speed: 1500 rpm Spindle Condition: New 🧰 Equipment / Accessories ✅ Electro-permanent magnetic clamping table Ø 800 mm ✅ Adjustable magnetic force (20–100 %) ✅ Demagnetization device ✅ Coolant system with band filter (100 l/min, 350 l tank) ✅ Additional grinding wheel flanges Ledpjzhnbpjfx An Ioad ✅ Teleservice / Remote diagnostics ✅ CE marking Important conditions: Please note that the sale of this machine is only possible under the following conditions: • Sale exclusively to end users/manufacturing companies (no resale to dealers) – corresponding company profile required • Sale only within Germany or the EU • Inclusion of a dual-use disclaimer in the purchase contract (legally required) Sales / Transfer Conditions: • Dismantling, removal, and transport are the responsibility of the buyer and at their own risk. • The buyer is responsible for providing personnel, tools, and transport equipment. The personnel must only work with appropriate personal protective equipment, and only trained personnel may be used. If you are interested, we look forward to hearing from you so that we can discuss the further details directly.

Condition: used, mileage: 4,33,357 km, power: 338 kW (459.55 HP), first registration: 08/2017, fuel type: diesel, tire size: 425/65R22.5, axle configuration: 10x8, wheelbase: 6,800 mm, fuel: diesel, brakes: engine braking, color: red, gearing type: automatic, emission class: euro6, suspension: other, total length: 9,570 mm, total width: 2,550 mm, Year of construction: 2017, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, differential lock, electric window regulation, traction control, = Additional options and equipment = - Passenger seat - Driver's cab - Tipping hydraulics - Lift axle - Hub reduction - Radio - Reversing camera - Sun visor - Toolbox - Central lubrication system - Central lubrication = Notes = Spring suspension. Third axle with air suspension and liftable. Hub reduction. = Further information = Technical information Number of cylinders: 6 Axle configuration Brakes: Drum brakes Front axle: Tyre size: 425/65R22.5; Steering axle; Tyre tread left: 50%; Tyre tread right: 50%; Suspension: leaf suspension Middle axle 1: Tyre size: 13R22.5; Steering axle; Tyre tread left: 50%; Tyre tread right: 50%; Suspension: leaf suspension Middle axle 2: Tyre size: 13R22.5; Steering axle; Tyre tread left: 20%; Tyre tread right: 20%; Suspension: air suspension Middle axle 3: Tyre size: 13/R22.5; Twin tyres; Inner left tread: 30%; Outer left tread: 30%; Inner right tread: 30%; Outer right tread: 30%; Suspension: leaf suspension Rear axle: Tyre size: 13/R22.5; Twin tyres; Inner left tread: 30%; Outer left tread: 30%; Inner right tread: 30%; Outer right tread: 30%; Suspension: leaf suspension Laedey Smt Uspfx An Isd Weights Unladen weight: 19,720 kg Payload: 29,280 kg Gross vehicle weight: 49,000 kg Maintenance APK (Technical Inspection): valid until 09/2026 Identification Type number: TGS 49.460 / 10X8/6 / BB / TIPPER = Company information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), We speak Russian. We strive to provide accurate information; however, no rights can be derived from the texts provided.

Year of construction: 1990, condition: like new (used), Well known 'EN' brand (Taïwan) 2-axis CNC spring generator. Low investment for CNC production of easy torsion springs up to 2,0 mm. Ljdoiz Ddkspfx An Ijad

Condition: new, 6.5 mm multi-axis springs and wire forms generator, featuring up to 16 axis, including wire rotation, one motor per slide, OD control and other nice features. The machine is widely used for agriculture double torsion springs, but not only : it can produce an extensive range of torsion, double-torsion, extension springs, as well as wire and strip forms Lsdpfxei Ik Ayo An Ioad

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 318 BG 75, grinding length: 800 mm, grinding width: 300 mm, grinding wheel diameter: 250 mm, controller model: CNC QUICK (SIEMENS 805, PLC), number of axes: 2, TECHNICAL DETAILS Grinding length: 800 mm Maximum grinding width: 300 mm Grinding wheel diameter: 250 mm Axes: 2 Table length: 800 mm Table width: 300 mm Maximum distance between table and spindle center: 600 mm Lsdpfx Aeyhnlpsn Ioad Maximum width: 70 mm Width: 50 mm Bore: 51 mm Table speed: from 2 m/min to 35 m/min Creep feed: from 2 m/min to 1,000 m/min Automatic cross feed: from 1 mm/min to 10,000 mm/min Automatic vertical feed up to: 10,000 mm/min MACHINE DETAILS Control: CNC QUICK (SIEMENS 805, PLC) Connection: 50 Hz 3x 400 V Grinding spindle motor: 6.6 kW Total power requirement: 22 kVA Machine weight: 4,500 kg EQUIPMENT Coolant system Paper filter unit Coolant/fume extraction unit Coolant temperature stabilization Electro-magnetic chuck length: 800 mm Electro-magnetic chuck width: 300 mm Dressing unit TAG Profile dressing unit TAD Electronic balancing device Lamp Complete splash guard cabin RS 232-C, V 24 interface

Year of construction: 1987, condition: excellent (used), Manufacturer MAHO Type MH 800 T year of construction 1987 control Heidenhain TNC 355 technical data Working range X way 800 mm Y path 450 mm Z path 500 mm Table rigid angular table 900x600 mm Workpiece weight max 800 kg working spindle 63-3150 u/min Machine dimensions length 3817 mm width 3937mm Lsdpfx Anjlzkdlo Ijad height 2047 mm Weight 4100 kg

Condition: ready for operation (used), Gear hobbing machine type FD320, FD500 and FD 800 Cugir Laedpfx Anocrd Nme Isd Maximum module 6 to 10 mm Max. working diameter 320 to 800 mm

Condition: ready for operation (used), Year of construction: 2008, Ernault Somua CNC Lathe 1400x8000 CNC system Fanuc 21i TB Maximum turning diameter: 1400 mm Maximum workpiece length: 8000 mm Maximum turning diameter over cross slide: 1100 mm Spindle diameter: 235 mm Maximum workpiece weight: 25,000 kg Lsdpfx Aoyly Nbsn Isad Motor power: 75 kW Video of the machine under power available!

Condition: like new (used), Year of construction: 2026, functionality: fully functional, TRI OPTIQUE Manufacturer: PELLENC Type: M 2800 BB HR Working width: 2,800 mm Option installed in June 2024: separator for all types of metal, including stainless steel, metal sensor. New belt. The machine is capable of sorting all types of plastic by quality, all metals including stainless steel, and wood. The machine has just been serviced. Feeding system: Manufacturer: SINEX Type: MU 75 6500 Power: 2 x 3 kW Output conveyor 1: Manufacturer: RMIS Output conveyor 2: Lsdpoyy Aa Tefx An Ioad Manufacturer: ARVAL

Condition: used, mileage: 2,48,175 km, power: 294 kW (399.73 HP), first registration: 12/2015, fuel type: diesel, empty load weight: 15,527 kg, maximum load weight: 10,473 kg, overall weight: 26,000 kg, tire size: 13R22.5, axle configuration: 6x4, wheelbase: 4,500 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, loading space length: 6,500 mm, loading space width: 2,460 mm, loading space height: 780 mm, Equipment: ABS, additional headlights, cabin, central locking, crane, cruise control, differential lock, fog lights, navigation system, onboard computer, power assisted steering, seat heater, traction control, Vehicle location: Bovenden, company premises, 1x comfort seat, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, sun visor, cruise control, navigation system, ABS (anti-lock braking system), ASR (traction control), constant throttle, power take-off, raised exhaust, automatic transmission, differential lock, work lights, rotating beacon, leaf suspension, air and electrical connections for trailer coupling, underride guard, lateral aluminum side guard, swinging tailgates, roof hatch, rear-mounted crane, emergency stop, grab control, foldable, 2-point hydraulic support, radio remote control, four hydraulic extensions, green environmental badge Wheelbase: 4500 mm Body: flatbed body with aluminum side panels, steel floor & rear crane Palfinger PK 18002-EH C with remote control Load chart: 4.1m - 3,850kg, 6.1m - 2,500kg, 8.1m - 1,800kg, 10.2m - 1,380kg, 12.4m - 1,140kg. The crane has 1,000 . Loading height approx. 1370mm! Trailer traverse with air and light connection available! Rotator available at extra cost! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted! Laodpsww E Stefx An Ied

Condition: used, Year of construction: 2001, Technical details: grinding diameter max.: 3-220 mm regulating wheel width: 400 mm max. width of grinding wheel: 400 mm grinding motor: 55 kW peripheral speed: max. 45 m/sec regulating wheel dimensions: 350 x 400 x 203 mm dimensions of grinding wheel: CBN 500 x 400 x 304 mm grinding wheel size: KORUND 600 x 400 x 304 mm total power requirement: 75 kVA weight of the machine ca.: 13 t. dimensions of the machine ca.: 4,47 x 2,77 x 2,49 m. Centerless Grindign Machine JUNKER JUPITER 500 CNC SIEMENS in good condition. Including: · 2 robots Kuka KR 16 Year 2007 · CNC loading and unloading device Promot EPL60NC Year 2007 Laodpfettxg Iox An Ied The machine was lately used for grinding of guide bushes (through grinding). Plunge is possible. JUPITER's Centerless grinding, also available with CBN. Junker this circular grinding method with CBN grinding wheels, which opens up significant productivity benefits from the long service life of the grinding wheel, especially at high volumes. In addition, the simultaneous removal takes on the entire Schleswig-Holstein, which provides both in mass production and in small batches for significantly reduced processing times. The grinding process with JUPITER When centerless grinding, there are two grinding processes: the through grinding and plunge. Both methods are possible with the JUPITER. Applications through grinding: Pin and Bushings Body, rings, smaller rings, piston parts (eg compressors), waves with constant diameter piston rods (eg shock), Small piston for hydraulic and fuel injection, precision wires and rods, piston pins. Applications Plunge: Rotor shafts, transmission parts, bearing surfaces of camshafts, tube and pipe fittings for composite camshafts, universal joints, parts for needle injection, valve stems, barrel rolls. *

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 6700x3350x1500 mm Weight 1000 kg Total power requirement 9 kw Lsdpevz Etmefx An Iead

Condition: ready for operation (used), * Idlers: with rolls * For Belt: 800 mm * Rolls with size: 240 mm x 390 mm x 240 mm * ∅: 133 mm Lasdpeywl T Refx An Isd * Price: €38 a Piece * On stock: 290 pieces.

Condition: ready for operation (used), * Idlers: with rolls * Type: heavy duty * For Belt: 800 mm * Rolls with size: 275 mm x 430 mm x 275 mm * Ø: 150 mm * Price: €45 a Piece Ledpfxoywl T Dj An Iead * On stock: 200 pieces.

Condition: ready for operation (used), * Model: suspended idlers * For Belt: 800 mm * Rolls with size: 315 mm L x 108 mm ∅ * Price: €28 a Piece Lodpfeywl S Tsx An Isad * Stock: 1050 pieces.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 87,310 h, functionality: fully functional, grinding wheel width: 400 mm, grinding wheel diameter: 600 mm, grinding diameter: 220 mm, overall weight: 13,000 kg, TECHNICAL DETAILS Maximum grinding diameter: 220 mm Regulating wheel width: 400 mm Maximum grinding wheel width: 400 mm Grinding wheel drive: 55 kW Maximum circumferential speed: 45 m/s Regulating wheel dimensions: 350 x 400 x 203 mm CBN grinding wheel dimensions: 500 x 400 x 304 mm Aluminum oxide grinding wheel dimensions: 600 x 400 x 304 mm Grinding spindle headstock Total stroke of grinding spindle headstock: 130 mm Speed of grinding spindle headstock: 150 m/min Rapid traverse adjustment max.: 150 m/min Ljdpfxexvxhcs An Ioad Minimum infeed of grinding spindle headstock: 0.0005 mm Preselectable infeed size of grinding spindle headstock: 0.0005–0.05 mm Grinding wheel dresser Dresser support speed: 15–900 m/min Maximum stroke of dresser supports: 430 mm MACHINE DETAILS Overall power requirement: 75 kVA Dimensions & Weight Space requirement approx.: 4.47 x 2.77 x 2.49 m Machine weight approx.: 13 t Operating hours: 87,310 h

Condition: excellent (used), Year of construction: 2017, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: 110-00310, input voltage: 400 V, type of input current: three-phase, feed length X-axis: 2,500 mm, feed length Y-axis: 800 mm, pneumatic connection: 6 bar, compressed air connection: 6 bar, The KSL110-Headbag CNC Rotary Head Sewing System is in excellent condition and has logged approximately 2,000 operating hours. Fields of Application: Demanding safety, functional, and decorative seams. Features: - Sewing machine driven on the X axis, template driven on the Y axis - 360° rotary head with alternating double feed for perfect seam results in multi-directional sewing processes - Intermittent feed (feed stops when the needle pierces the material) - Switchable needle feed (on/off) for continuous sewing with maximum seam quality - Sewing head can be pneumatically lifted (75 mm) for direct access to any seam position - Two 26 mm bobbins and hooks - Excellent sewing properties thanks to the vertical hook system - Top thread tension is electrically/pneumatically adjustable via menu with Eltex unit - Broken thread monitoring - Bobbin thread monitoring via stitch counter - Electromagnetic thread trimmer for upper and lower thread Lodsyxnl Sspfx An Ijad - Mobile electric bobbin winder (freely positionable) - The touchscreen control panel provides intuitive operation and stands out with its modern, clear layout. Seam progress can be monitored in real time on the screen. Special Features: - Automatic detection of the workpiece holder/sewing program via hand scanner and barcode ensures additional process safety - Sewing area is protected by light barriers (CE compliant) - Pneumatic presser foot height adjustment - Clamping device for fixing two sewing templates in the working area Technical Data for the KSL110-Headbag CNC Rotary Head Sewing System: - Length and width: 3,495 mm x 4,276 mm - Height: 1,685 mm - Weight: 2,000 kg - Max. sewing area: 2,500 mm x 800 mm - Stitch type: 2-needle/double lockstitch - Max. material thickness: 10 mm - Max. sewing speed: 2,800 stitches per minute - Max. stitch length: 12 mm - Operating voltage: 3P+N+PE / 400 VAC / 50–60 Hz - Power consumption: 16 A / 5 kW - Operating pressure (min. – max.): 6 bar - Year of manufacture: 05/2017 - Operating hours: approx. 2,000 h - Control unit: Touchscreen monitor with computer (Windows) The CNC Rotary Head Sewing System KSL110-Headbag is a powerful industrial sewing system designed for demanding safety, functional, and decorative stitches. Manufactured in 2017, this model is characterized by its robust construction. The machine is housed in a grey and white aluminum cabinet that appears clean and well-maintained, indicating careful use. This advanced CNC sewing system offers a sewing area of 2,500 mm x 800 mm and operates with a 2-needle double lockstitch system. It supports a maximum sewing speed of 2,800 stitches per minute and a maximum stitch length of 12 mm. The sewing head is pneumatically liftable by 75 mm, allowing direct access to any seam position, and features a 360° rotating head with alternating double feed, ensuring perfect seam results in multi-directional sewing processes. It is particularly suitable for demanding and industrial sewing applications that require high precision and reliability.

Condition: excellent (used), Year of construction: 2005, travel distance X-axis: 1,800 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 480 mm, feed length X-axis: 1,800 mm, feed length Y-axis: 420 mm, feed length Z-axis: 480 mm, feed rate X-axis: 45,000 m/min, feed rate Y-axis: 45,000 m/min, feed rate Z-axis: 45,000 m/min, total height: 3,100 mm, total length: 4,300 mm, total width: 3,100 mm, table width: 420 mm, table length: 2,000 mm, rotational speed (max.): 8,000 rpm, overall weight: 5,000 kg, spindle motor power: 16,000 W, 3-axis CNC machine (VMC) Hedelius - MC40/1800 MACH-ID 9596 Make: Hedelius Type: MC40/1800 Control: HeidenHain iTNC530 Year: 2005 X - Travel: 1800mm Y - Travel: 420mm Z - Travel: 480mm Laodjy Ewncjpfx An Isd Table Length: 2000mm Table Width: 420mm Feed rate X-Axis: 45000mm/min. Feed rate Y-Axis: 45000mm/min. Feed rate Z-Axis: 45000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 16kW Speeds / ranges: 8000Rpm ATC / revolver: 20 Coolant through spindle / Bar:20 Number of controlled axis: 3 Chip conveyor: Yes Coolantsystem: Yes Length: 4300mm Width: 3100mm Height: 3100mm Weight: 5000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1998, condition: good (used), Make: UNION Type: Ti 1800 Year: 1998 Specifications Metric US Standard Table Length 2000 mm Table Width 1800 mm Table load 16000 Ljdskwcdbepfx An Isad Movement V-axis 1250 mm Rotation B-Axis 360.000 ° Rotation speed B-Axis 1,35 Omw/min. Movement speed V-axis 4000 mm/min. Dimensions (Estimate) Length 3400 mm Width 2000 mm Height 920 mm Weight 6500 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1998, functionality: limited functionality, machine/vehicle number: 98 20 262, Technical data at a glance GEISS, Seßlach Type 2800 x 1400 Year of manufacture 1998 Control Siemens Sinumerik 840. Working area approx. 2,800 x 1,400 mm Axes: 5-axis machining (B and C axis in milling head) Power 43 kW Weight approx. 5,900 kg Power supply 400 V / 66 A / 50Hz Formerly a tandem version. Tandem version has been professionally deactivated. Fully functional. Machine can be inspected at any time. Dismantling and loading at buyer's own risk. Laodpfx Aoyim Szsn Ied

Condition: used, Year of construction: 2000, functionality: fully functional, overall weight: 800 kg, chuck outer diameter: 800 mm, mount diameter: 520 mm, bolt circle diameter: 436 mm, cone mount: 286 mm, Pos. 1.0) Chuck diameter ø 800mm Three-jaw power chuck with 6 clamping jaws Manufacturer: SMW-Autoblock ø 800HL-6GR incl. Flange size 11: SMW Autoblock: 241261 FF2 Thread connection for draw tube: Workpiece clamping via jaws: Pneumatic or hydraulic operation. Incl. bolt-on jaws with serrated interface: Weight: approx. 700kg Good condition, low operating hours. Lajdoy Appmepfx An Iod ----- Pos. 1.1) Optional flange available Mounting diameter: 520 mm Bolt circle: 436.6mm; M24 Taper: KK 15: 285.78mm Width: approx. 40mm Weight: approx. 60kg _____ SMW-800HL description Suitable for clamping thin-walled workpieces. Designed for horizontal CNC lathes. Adjustable to 6 jaws. STANDARD EQUIPMENT Power chuck with mounting bolts, Incl. set of bolt-on jaws Low maintenance due to sealed design (Proofline series chucks). 6-jaw power chuck _____ Pos. 2) 3-jaw power chuck ø 800 mm Manufacturer: FORKARDT: Jaw interface: Serrated Size: to be provided Thread connection for draw tube: on request Spindle adapter flange for machine: on request Price incl. shipping: on request

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: K03903KT601220260601, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Cycut, controller model: 6000, laser type: fiber laser, laser source manufacturer: Maxphotonics, laser source model: MFSC-3000, laser hours: 80,000 h, laser power: 3,000 W, laser wavelength: 1,080 nm, pipe diameter (max.): 110 mm, pipe length (max.): 6,500 mm, table length: 7,000 mm, table width: 1,200 mm, table height: 1,800 mm, workpiece weight (max.): 80 kg, power: 3,000 kW (4,078.86 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, warranty duration: 12 months, 1.This is Model 6012 Two-Chuck Fiber Laser Tube Cutting Machine, equipped with MAXPHOTONICS MFSC-3000 3000W fiber laser source and BOCHU CypCut/HypCut professional tube cutting control system. 2.It adopts heavy-duty integrated welded bed with aging stress relief treatment, dual pneumatic self-centering front & rear chucks for stable clamping, short tail cutting design to improve material utilization. 3.The fully enclosed cutting cabin with integrated dust removal system realizes low smoke, low noise and laser radiation protection, meeting industrial safety and environmental standards. 4.Full closed-loop servo drive system ensures positioning accuracy ±0.04mm/m and repeat positioning accuracy ±0.03mm/m, maximum idle moving speed up to 120m/min, matched with water cooling chiller for stable laser output. 5.The machine supports cutting carbon steel, stainless steel, aluminum alloy, brass and copper tubes, compatible with round tube, square tube, rectangular tube, oval tube, angle steel and channel steel. 6.It can complete hole drilling, bevel cutting, intersecting line cutting and blanking in one process, ideal mass production equipment for metal pipe processing factories. Item Parameter Machine Model 6012 Two-Chuck Fiber Laser Tube Cutting Machine Laser Source Brand MAXPHOTONICS Laser Source Model MFSC-3000 Laser Power 3000W Laedpfx Anjza Rm He Isd Wavelength 1080nm (±10nm) Control System BOCHU CypCut / HypCut (Tube Special Version) Structure Horizontal Heavy Bed, Dual Pneumatic Chucks Processing Tube Length Max 3000mm Clamping Range Round tube Φ10–Φ120mm; Square tube 10×10–80×80mm Positioning Accuracy ±0.04mm/m Repeat Positioning Accuracy ±0.03mm/m Max Idle Speed 120m/min Cooling Mode Industrial Water Cooling Processable Materials Carbon Steel, Stainless Steel, Aluminum Alloy, Brass, Copper Supported Profiles Round tube, square tube, rectangular tube, oval tube, angle steel, channel steel