Used Edge Banding Machine With Pre-Milling Unit for sale (88,942)

Condition: new, CATALOG NUMBER HL001 Ncodpfozccuusx Aflew - New machine, in stock – Pre-milling unit – Radial scraper + polishers TECHNICAL DATA - Panel thickness: 45mm - Edge thickness: 0.4 mm – 3 mm - Min panel width: 90mm - Min panel length: 90mm - Feed speed: 7m/min - Pre-milling: 9000 rpm - Top/bottom: 10500 rpm - Front/back: 8800 rpm - Polishing: 2800 rpm - Main motor: 6kW - Feed power: 0.75kW - Pre-milling power: 1.5kW - Glue spindle power: 0.25kW - Top-bottom milling power: 0.18kW - Top milling power: 0.55kW - Top polishing motor: 3-phase 0.12 kW, 1-phase 0.18 kW - Bottom polishing motor: 3-phase 0.12 kW, 1-phase 0.18 kW - Working table height: 856mm, extended support width: 560mm - Extraction connection: 3x100mm - Dimensions (L/W/H): 3200/1200/1200mm, weight: 660kg Net price: 49,900 PLN Net price: 11,880 EUR based on 4.2 EUR exchange rate (Prices may change with significant fluctuations)

Condition: used, Double end profiler, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -on dovetail guide, cross table -With guide for cutting veneer edges -Power: 0.15 kW 11160 rpm at 200 Hz -Voltage: 133 volts -Admission: Nsdpfxob A Ta Ne Aflscw -Tool: Ø 150 mm -Dimensions: 880/260/H300 mm -Weight: 18.5 kg

Condition: used, Double end profiler, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -on dovetail guide, cross table -With guide for cutting veneer edges -Power: 0.15 kW 11160 rpm at 200 Hz -Power: 0.22 kW 17250 rpm at 300 Hz -Voltage: 133/200 volts -Admission: -Tool: Ø 150 mm Nedeb A Sy Hopfx Aflecw -Dimensions: 560/220/H240 mm -Weight: 16 kg

Condition: good (used), Double-end tenoner, edge processing machine, flush trim router bit, edge router bit, spindle motor, milling motor -2x motor: 0.4 kW 20 shaft 11300 rpm at 200 Hz -Motor: mounted on guides Ncedpfxeb A Im Re Aflow -Motors: swiveling -Cutter: with indexable inserts -3x consoles: each with 2 motors Price: per piece -Weight: 60 kg/piece

Condition: used, Double end profiler, edge processing machine, flush milling cutter, edge milling cutter, spindle motor, milling motor -1x motor: 1/1.5 kW 2670/5710 rpm at 50/100 Hz -1x motor: 5.5/8 kW 2870/5880 rpm at 50/100 Hz -Motor: mounted on guides Nodpeb Uhrzsfx Aflocw -Motors: swiveling -Mill: with inserts -Dimensions: 900/1100/H1000 mm -Weight 274 kg

Year of construction: 1994, condition: used, Double-end tenoner, edge processing machine, flush cutter, edge cutter, spindle motor, milling motor Ncodpfou Rv Rxjx Aflew -Manufacturer: Paul OTT, milling unit from edge banding machine U 206 -Milling motors: Type HF 08.2 -Power: 0.6 kW / 200 Hz -Speed: 1200 rpm -Adjustment ranges: see photos -Number: 2x milling unit available -Price: per piece -Dimensions: 530/490/H600 mm -Weight: 67 kg/piece

Year of construction: 1994, condition: good (used), Double-end tenoner, edge processing machine, flush cutter, edge cutter, spindle motor, milling motor -Manufacturer: Paul OTT, milling unit from edge banding machine U 206 Ncjdpsu Scpqjfx Aflsw -Milling motors: Stephan type ZBXD90L20-2 gearbox BMB 46 -Power: 2.2 kW -Speed: 12155 rpm -Cutter width: 30 mm -Adjustment range: 0 - 70 mm -Dimensions: 460/370/H570 mm -Weight: 89 kg

Condition: good (used), Year of construction: 2000, Edge milling machine, edge milling device, chamfering machine, mobile milling machine, weld edge former, weld edge former, weld preparation, weld edge forming machine, deburring device, deburring machine Nsdpfxsy Rt Aae Aflocw -Edge milling machine: with adjustable speed -Depth adjustment: 0 - 7 mm -Drive: 0.75 kW -Adjustable speed: 0 - 6000 rpm -Angle: 45° -Accessories: Widia milling head -Dimensions: 650/560/H1190 mm -Weight: 94 kg

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -1x motor: 0.15 kW 11160 rpm at 200 Hz -Saw: max. Ø 150 mm -Motor: mounted on guides -Travel distance: 320/100 mm -Dimensions: 550/250/H330 mm -Weight: 17 kg Ncsdpfx Afsb A Nypslsw

Condition: excellent (used), Year of construction: 2018, Chassis for edge banding machines Was mounted on Homag Edgeteq S-200, KDF 1130 FC (1100kg). Will certainly also fit other machines, such as Brandt (minor modifications may be necessary) Length of U-section: approx. 1130mm Ncjdpjw S Dmdefx Aflow Overall height incl. castors: approx. 150mm 4 sturdy steel swivel castors with grease fittings 2 locking brakes 2 leveling plates for height adjustment Machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "more offers from this seller".

Condition: new, Catalog number: HZ014 – preliminary milling – edge trimming – new machine, in stock – CE certificate – professional TECHNICAL DATA panel thickness 8-45mm edge thickness 0.4 mm – 3 mm min panel width 90mm min panel length 170mm feed speed 9m/min pre-milling 12000 rpm front/rear milling 12000 rpm top/bottom milling 12000 rpm edge trimming 12000 rpm polishing 3000 rpm feed motor power 1.13kW glue tank heating power 1.315kW pre-milling power 1.5kW pre-heating power 0.4kW glue spindle power 0.25kW front/rear milling power 0.22kW top/bottom milling power 2×0.37kW edge trimming power 0.37kW polishing motor 0.12 kW and 0.18 kW motor 6.16kW working height of the table 960mm extended support width 560mm Nsdsza Emhepfx Afljcw extraction connection 3x125mm dimensions L/W/H 3731x720x1636mm weight 915kg The Holzing G-MAX 480 edge banding machine with pre-milling, saw cutting, top-bottom milling, edge trimming, radius scraping, and polishing ensures a high-quality final result on the workpiece. The veneer can be in rolls up to 3 mm thick and in strips up to 4 mm thick. The machine also has a glue tank with a capacity of 1.2 kg. Net price: 99000 PLN Net price: 23571 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary due to higher fluctuations)

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 Proven quick heating tank; heating time approx. 5 minutes. Safety interlock for the application roller; the roller engages only after reaching operating temperature. Centrally height-adjustable upper pressure bar. Edge feeding and roll separation pneumatically controlled. Connected load: approx. 11.5 kW, heating power 4.5 kW, frequency inverter 300 Hz, 4 kVA. HF crosscut saw unit: electrically and pneumatically controlled, motor power 0.37 kW. Saw blade diameter: 100 mm HF flush milling unit: for radius, straight and chamfer milling. Crosscutting from rolls up to 3 mm. Edgebanding and crosscutting up to 5 mm. Minimum workpiece length: 260 mm Minimum workpiece width: 90 mm Workpiece thickness: Chamfer milling from 10 mm / radius milling from 13 mm / max. 45 mm Extendable workpiece support at front. Digital position display for feed height adjustment, edge thickness, and milling. Ncedew Tfw Hspfx Aflew With chassis. With heated infeed ruler. Compressed air connection: 6 bar Central extraction port: 100 mm Dimensions (L x W x H): 3115 x 1230 x 1200 mm Approx. 560 kg Availability: short notice Storage location: Flörsheim

Year of construction: 1989, condition: used, Used Machine Year of Manufacture: 1989 Features and Technical Specifications: - Diamond polishing and milling machine Njdpezpblqofx Afljcw - For high-gloss milling and polishing of straight plastic edges - Suitable for PMMA (acrylic glass) and other thermoplastics - Diamond polishing and milling unit - Precision workpiece guidance - Robust welded steel construction - Power consumption: 1.5 kW - Supply voltage: 220 V - Mains frequency: 50 Hz Availability: available shortly Location: 63934 Röllbach

Condition: good (used), Code: 0458 Brand: ARTECH BIESSE GROUP Model: SINGLE 89-N - CE Standard Edge bander for straight and shaped panels , for edges in wood, veneer, PVC, plastic laminate etc. - CE Standard Technical data: Ncsdpfxjznu Dws Aflow Working height up to 120 mm Edge thickness 0,4 - 3 mm Minimum bending radius 20 mm Minimum panel length mm 300 Glue tank capacity 3 liters Motorized feed with adjustable speed Front extension for supporting large panels Work surface tiltable from 0 to 45 degrees Feed speed 4/16 mt/min with variable speed drive Trimmimg unit consisting of 2 superimposed motors Total absorbed power Kw 5,2 Working pressure bar 6 Overall dimensions mm 1300 x 900 x 1380 h Weight kg 350

Condition: used, 4-axis CNC drilling and milling machine IXION Type 30 CNC W VMC, BAZ, machining center Year of construction approx. 1997, machine overhauled in 2020 Travel X: 600 mm Y: 350 mm Z: 600 mm Table size 800 x 400 mm T-slot spacing 75 mm Table load 300 kg Spindle holder SK 40 (tightening bolt DIN 69872 A) Spindle speed 20-5000 rpm Torque at the spindle max. 150 Nm Distance between spindle nose and table max. 660 mm Feed speed X, Y and Z 0 - 5000 mm/min. infinitely variable Rapid traverse speed X, Y and Z 15000 mm/min. Tool change time approx. 5 sec. Tool change time from chip to chip approx. 7.5 sec. Milling capacity in St 60 150 ccm/min. Drilling capacity in St 60 35 mm Nsdpfxju Tln Nj Aflscw Thread cutting capacity in St 60 M24 Spindle motor drive power 5 kW (10 kW at 25% duty cycle) Mains connection 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position tool changer - hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, jaws lathe chuck Ø 200 mm Speed approx. 25 rpm, transmission ratio 1:180 - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump - Switch cabinet fixed to the machine Space required for transportation Length 320 cm x width 230 cm x height 300 cm Footprint of the machine with chip conveyor L x W x H 3200 x 3100 x 3000 mm Weight of the machine 3100 kg Weight of the chip conveyor approx. 200 kg good condition

Condition: used, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of cast steel gray cast iron Table unit with clamping plate and very solid guideway Table clamping surface 5500 x 2000 mm Travel of the table clamping plate approx. 3100 mm Table height 1050 mm Table load: max. 20 tons Ball screw: Ø 100 mm Thread pitch: 20 mm (single-start) - Processing table guided very stably on the bed - Metal telescopic guideway cover - comes from a DROOP & REIN portal milling machine - Longitudinal table movement via ball screw and SIEMENS servo motor - Clamping surface with 11 T-slots 28 mm - Drive via SIEMENS 1FT6134-6AB71-1AG2 servo motor with IC200448S/R encoder (RN 000 B25) Total length 9500 mm Width 2000 mm Ncjdpfx Afjthuzpolew Overall height 1050 mm dead weight 28 ton. good condition

Condition: used, Welding edge former INDUMASCH SIEGEN type V 12 Machine. No.: 50674 Year of construction 1992 Material thickness max. 40 mm Bevel angle 45° Working speed approx. 3 m/min. Motor power 2 kW Mains connection 400 Volt, 50 Hz - Forward / return - Built-in guide roller for 45° bevel angle - Belt guard missing Dimensions L x W x H 650 x 600 x 650 mm weight 75 kg good condition Ncjdjrz Tupspfx Aflew

Condition: good (used), Year of construction: 2002, 0,4-3 mm Workingpiece thickness from to 6-45 mm Ncjdozmy N Njpfx Aflew Total length 3700 mm Feed speed 8 m/min. Weight 900 kg

Condition: excellent (used), Year of construction: 2011, I sell the fully equipped edge banding machine BRANDT Ambition 1220 FC, year 2011: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding EVA glue Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom manual adjustable Corner rounding 1-motor manual adjustable Radius R2 scrapers pneumatic adjustable ( set of R1 included) Glue scrapers Control panel Ncjdjzn Avzepfx Aflew Working thickness adjustment manual driven Material height 8-50mm Edge thickness 0,4-3mm Feeding speed 10m/min. Total length including feeding plate 4150mm Total weight 1600kg Very good condition, fully working! Including full documentation and CE. Available immediately.

Condition: excellent (used), Double side - Independent Machine (1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,4 / 3 Panels thickness (min/max) mm 10 (ca.) / 60 Working width (min/max) mm 260 (ca.) / 3200 Numerical Control MAESTRO PRO EDGE /Software EYE-M Adjustable feeding speed (m/min) 10- 40 Safety sound-proof enclosures/cabins + Distance (center-axes) of Disappearing Dogs (mm) 400 SIZING PART (for each side): Ncjdpfx Aozmfg Toflsw Anti-chipping Milling Unit AS (1 x Kw 4) Hogging Units DTR (2 x Kw 8) with CNC vertical adjustment Spraying unit (Anti-sticking liquid) AAR EDGE-BANDING PART (for each side): Lamps to heat the workpieces side + Glueing Unit (PUR Glue + Quick Melt system) CNC adjustment of the edge height Band Pressure zone (N.C. adjustment) + Edge coils support (No 6 reels) CNC positioning of the edge Snipping (end-cutting) unit YU/SP-750 (30 m/min) Rough Trimming unit RSP Fine Trimming unit (Multi-profile, by N.C. adjustment) RI/S 2P Corner Rounding unit ( Contour Trimming) C1+C2 (4 x Kw 0,35) ED-SYSTEM e Fast-Release Profile Scraping unit RAS/S Milling grooving unit U (1 x Kw 5,5) on Left-side Glue scraping unit RCA/2C Spraying Unit (for polishing liquid) Buffing unit SPE

Condition: excellent (used), Universal DOUBLE-SIDE SIZING & EDGE BANDING MACHINE (for both 1st and 2nd pass) Ncedsu Rc Anepfx Aflew Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Panels thickness (min/max) mm 10 - 60 Working width (min/max) mm 240 - 2700 Numerical Control PC Base Windows /Software SINITRA Adjustable feeding speed (m/min ) 10 - 40 (INVERTER C.N.) Distance (center-axes) of the Disappearing Dogs (mm) 500 SIZING PART (for each side): Anti-chipping Milling Unit AS 10 (Kw 5,8) pneumatic N° 2 Hogging Units (1 Top + 1 Bottom) DT 10 (Kw 5,8 x 2) Spraying unit (Anti-sticking liquid) EDGE-BANDING PART (for each side): 1° Glueing Unit (Hot Melt + Quick Melt Unit) SP30 (High Melt + Edge Control EC 40) 2° Glueing Unit (Thermofusion with hot air) Air Force System Band Pressure zone (N.C. adjustment) . Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit IT 90-X (Kw 0,65 x 2) speed 28m/min. 0 - 25° Rough Trimming unit RS 10 (2 x Kw 2) Fine Trimming unit (Multi-profile, by N.C.) RF 40 (Kw 1 x 2) 0 - 25° Multi Function Unit (Profile contour Trimming unit) AR 80 (Kw 0, 65 x 2) max speed 25 m/min - ROTAX motors with automatic tool change (tools) Profile Scraping unit (Multi-profile, by N.C.) RB 40 (multiprofile) Glue scraping unit RC 20 + Spraying Unit (for polishing liquid) Buffing unit SZ 30 (Kw 0,37 x 2)

Condition: excellent (used), Double-side Sizing & Edge Banding - First Machine (1st in a line) Double side TWIN machine (1 Left Side single machine + 1 Right-side sigle machine) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 10 / 60 Working width (min/max) mm 100 / 1200 Numerical Control PC base Windows /Software PC / SINTRA Adjustable feeding speed (m/min) 10 - 40 (INVERTER C.N.) SIZING PART (for each side): Spraying unit (Anti-sticking liquid) No. 2 Hogging Units (1 Top + 1 Bottom) DT 10 (Kw 5,8 x 2) Free space EDGE-BANDING PART (for each side): 1° Glueing Unit (Hot Melt Glue + Quick Melt system) SP 30 (High Melt + Edge Control EC 40) 2° Glueing Unit (Thermofusion with hot air) Air Force System Band Pressure zone (N.C. adjustment) Edge coils supporting unit (No. 6 reels) Rough Trimming unit RS 10 (2 x Kw 2) Fine Trimming unit (Multi-profile, by N.C.) RF 40 (2 x Kw 1) 0°-25° No. 1 Milling grooving unit EB 60 (1 x Kw 5) 0°-90°, ISO 30 motor Profile Scraping unit (Multi-profile, by N.C.) RB 40 Glue scraping unit RC 20 Njdpsu Rc Hyofx Aflecw Spraying Unit (for polishing liquid) Buffing unit SZ 30 (2 x Kw 0,37)

Condition: used, Year of construction: 2008, Connected load: 15 kW Feed speed: 14 (11) m/min Workpiece thickness: 8 - 60 mm Edge thickness: 0.4 - 8 mm Roller separation: max. 3.0 x 45 / 0.8 x 65 mm Extraction diameter: 120 / 160 / 100 mm Working height: 950 mm Dimensions: 6260 x 1560 x 2300 mm Weight: approx. 3000 kg Storage location: Supplier Ncodpfx Asy Ruzqeflsw

Condition: good (used), Year of construction: 2017, I sell the edge banding machine Vitap Eclipse. Edge banding station suitable for curved shaped edges Radius milling station Excellent condition, possible to test ! Ncodpfx Ajzmnx Seflow

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Equipment and technical data: - machine has been completely overhauled: - new Glue Jet 301 glue system (top part 1 mm) - all units inspected - all cutters sharpened - all knives replaced - feed speed: 10 - 18 m/min - workpiece length: min. 160 mm - workpiece width: min. 60 mm - workpiece thickness: 8 - 60 mm - edge thickness: 0.4 - 8 mm - electrics for infinitely variable feed: 400 V / 50 Hz, 2.2 kW - motorised pressure beam adjustment - automatic chain lubrication - PPC 315 control with 15" touchscreen - ECO MODE energy-saving mode - infeed fence 1350 mm, motor-adjustable - jointing/trimming unit 1802: - 2 x 2.0 kW, 200 Hz, 12000 rpm with 2 milling units for jointing the panel edge - cutter, diamond Ø 70 x 64 x 30 mm, Z2, counter-clockwise for jointing unit - cutter, diamond Ø 70 x 64 x 30 mm, Z2, clockwise for jointing unit - edge feed 1901 fully automatic - adhesive application station Glu Jet GJ301 automatic: - 2.3 kW; 50 Hz - storage hopper for granulate - pressure unit 1913 MOT - end-trimming unit 1918 (60 mm) pneumatic - multifunction milling unit 1826 MOT4 (2 x 0.65 kW): - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm counter-clockwise - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm clockwise - profile milling unit 1833 MOT4: - cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, counter-clockwise with CM technology - cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, clockwise with CM technology - scraper unit 1929 MOT2: Ncsdozlbpzspfx Aflow - carbide indexable inserts for scraper holder R = 2.5 mm (2 pcs. required) - flat scraper 1964 - buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) Availability: at short notice Location: 63934 Röllbach