Used Höhe 350 Mm/ Gesamtbreite: Ca. 200 Mm/ Innenbreite: Ca. 160 Mm for sale (85,830)

Condition: good (used), The scope of delivery includes: 1x U-shaped corner guard, used Material color: orange Overall height: approx. 350 mm Overall width: approx. 200 mm Internal width: approx. 160 mm Overall depth: approx. 360 mm Internal depth: approx. 240 mm Leg dimension: approx. 140 x 140 mm Dedpfxek T Au Eo Ap Deku Base plate dimension: approx. 340 x 200 x 8 mm Material thickness: approx. 6.00 mm Bore hole diameter: approx. 16 mm Number of bore holes: 04 pcs. Weight / piece: approx. 14.850 kg General information about the item: This item is offered for pick-up only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Year of construction: 2000, condition: used, Punching machine Premium quality HM 35/350 Dkedpog Dgyxefx Ap Dju BKE 200/5 Maximum pressure: 35 tons 5 mm sheet thickness at 40 kp/mm²

Condition: excellent (used), Your contacts within our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Included in the scope of delivery: 1x railing post, used Material color: blue Overall height: approx. 1,110 mm Overall width: approx. 110 mm Overall depth: approx. 62 mm Base plate: approx. 120 x 110 x 12 mm (W x D x H) Dksdpeh Hf Rmsfx Ap Dou Diameter of round tube opening: approx. 48 mm Distance center-to-center of holes: approx. 465 mm Material thickness: approx. 2 mm Weight per piece: approx. 5.07 kg Notes: - The railing post is open when viewed from above. - The heights of the round tube openings are: 565 mm and 1,030 mm (Measured from the bottom edge of the base plate to the bottom edge of the round tube opening) - Suitable for round tubes with a diameter of 45 mm General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location or scope of delivery. Our services at a glance: (Prices on request) Assembly, installation Our general assembly conditions apply Shelf inspection Shelf inspection according to DIN EN 15635, performed according to the requirements of BGR 234, visual inspection for all shelf systems. Delivery with our own fleet (without unloading)

Condition: used, The scope of delivery includes: 01x stand protection, used Manufacturer: Bito Dksdett R H Aspfx Ap Dju Material color: yellow Total height: approx. 715 mm Total width: approx. 99 mm Inner width: approx. 92 mm Leg dimension: approx. 65 x 65 mm Material thickness: approx. 3.5 mm Weight per unit: 4.96 kg. 04x screw M10x40 mm 04x nuts M10x40 mm 04x spacer sleeve 14x1.5x21 mm Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: like new (used), Year of construction: 2024, Used double-sided cantilever racking: hot-dip galvanized bolted system Scope of supply: 4 double-sided racking uprights, height 4,160 mm with base section 1,200 mm 24 cantilever arms with 1,200 mm depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg Dksdpfx Apsh Ek Daj Deu - Cantilever arms height-adjustable in 100 mm increments - Per upright, 6 screwable cantilever arms and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels on top of each other per upright side - Including longitudinal and diagonal bracing for 1,300 mm distance - Racking length 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racking is produced exclusively in Germany. We offer reliable freight services with prior notification before delivery. The material is packed in a way that allows for easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow load. The subsoil must be made of concrete, level and suitable for dowels, and must be able to absorb the acting loads. The customer must check and ensure the ground conditions, load-bearing capacity, and any required official permits. The racking uprights must be anchored in the ground on site; anchoring to the wall is not necessary and is not recommended. According to the occupational health and safety association, it is recommended that the racking uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: good (used), Approx. 1,000 – 1,500 units, transparent storage boxes, L: 350mm, W: 210mm, H: 200mm - used: Price per unit, ex warehouse: €3.50 (net), plus €5.00 / wooden pallet! Price for complete purchase: €3.00 (net) / unit, plus €5.00 / wooden pallet! Minimum purchase quantity: 198 units (2 pallets) Dkedpfx Apjzxcnxj Deu Manufacturer: Mixed, predominantly Promat MK3 (now Tecwerk) Type: Transparent storage boxes Year of manufacture: unknown Color: Blue and yellow, significantly more blue External dimensions: approx. L: 350mm, W: 210mm, H: 200mm Internal dimensions: approx. L: 280-300mm, W: 190mm, H: 190mm Weight per container: approx. 650g Load capacity: 20kg Packing dimensions: 1200 x 800 x 2000mm Condition: Dry, slightly dusty, scratches, some with QR codes, remnants of labels present Available: immediately Location: 78234 Engen

Condition: excellent (used), Technical data for the picking rack: Rack system: Dexion Type: HI280 Technical data for the installation: Number of rack rows: 01 pcs. Rack length: approx. 1,340 mm Number of bays per rack row: 01 pcs. at 1,290 mm Number of levels plus ground level: 06 pcs. Note: The advantage of a packing table or a picking rack is that all required tools and accessories needed for product assembly are always within easy reach. Scope of delivery includes: 02x uprights, used Material finish: Sendzimir galvanized Frame profile dimensions: 50 x 55 mm Adjustment pitch: 25 mm Incl. horizontal and diagonal braces Weight per piece: approx. 5.50 kg The uprights are pre-assembled Height: 1,200 mm Depth: 610 mm 06x shelves, used Material finish: Sendzimir galvanized Dimensions: 1,275 x 575 x 30 mm Weight per piece: approx. 4.37 kg Djdpjn Smvhofx Ap Deku Max. load per shelf with evenly distributed load: 100 kg 04x leveling plates, new Type: HI280 U-PL. STD 42X50X1.2 VZ Material finish: Sendzimir galvanized 06x shelf beams, used Overall length: 1,275 mm Z-profile: 50 x 25 mm Number of hooks: 02 pcs. Weight per piece: approx. 0.84 kg Material finish: Sendzimir galvanized 48x storage bins, used Manufacturer: SSI Schäfer Bin designation: LF 511 G ZW External dimensions LxWxH: 500x156x143 mm Internal dimensions LxW: 448 x 123 mm Weight per piece: approx. 0.785 kg 01x load sign With information on bay and shelf loads, manufacturer and order number Dimensions: 297 x 210 x 2 mm Note: As this is used equipment, damage, corrosion or similar may be present. General product information: This item is offered for collection only. Any requested transport or shipment of this item is subject to additional charges, which can be quoted separately based on delivery location and scope.

Condition: good (used), The scope of delivery includes: 01x U-approach corner, used material color: yellow total height: approx. 400 mm profile dim. outside: U: approx. 50 x 50 mm profile dim. outside: U: approx. 40 x 40 mm material thickness: approx. 5,00 mm Djdpon R Egzsfx Ap Dsku base plate dim.: approx. 300 x 100 mm Drill hole Ø: approx. 12 mm Number of drill holes: 06 pcs. Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This article is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm rack length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Dedpfsmhhf Sex Ap Dsku Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) Dkodpemhh Dtjfx Ap Dju - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with foot section, 1,200 mm usable depth Djdpfomidyfsx Ap Djku 12 cantilevers with 1,200 mm usable depth Longitudinal and diagonal struts for 1,300 mm rack axis spacing (4,000 mm rack length) Fastening material (screws, nuts and washers) - (*No paint damage!) - (*No damaged components!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 racks in stock) Net price: €1,990.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface painted in RAL 5010 (gentian blue) - Rack height 4,200 mm - Load capacity per stand 2,200 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 730 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery can take place in approx. 1 - 2 weeks after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-compatible and must be able to bear the loads. The customer must check and ensure that the soil condition and load-bearing capacity as well as any official permits that may be required are obtained. The shelf supports must be anchored to the ground on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm from the top edge of the stand.

Condition: good (used), The scope of delivery includes: 01x U- collision protection, used material color: yellow total height: approx. 400 mm profile dim. outside: U: approx. 100 x 50 mm profile dim. outside: U: approx. 80 x 40 mm material thickness: approx. 6,00 mm base plate dim.: approx. 200 x 100 mm Djdpjn R Edmefx Ap Dsku Drill hole Ø: approx. 12 mm Number of drill holes: 04 pcs. Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This article is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 4,200 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright center distance (4,000 mm shelf length) Fastening material (screws, nuts and washers) Dksdpfsmhhypjx Ap Dou - (*Delivery or collection in approx. 1 - 2 weeks) - (*No damage to paintwork!) - (*No damaged components!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Net price: € 1,990.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 4,200 mm - Load capacity per upright 2,200 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery can be made in approx. 1 - 2 weeks after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The surface must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25MythoSarya10, Mytho S Dkodpfx Asz Ipunep Deu with TP / Transparent, accessible at ground level with lift trucks and El. lifts. MAST VERSION Winding height 2450 mm 99 program TOUCH display 7" FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) ARYA system for automatic foil blowing and cutting, incl. infrared remote control

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, overall weight: 1,300 kg, load capacity: 160 kg, throat depth: 3,500 mm, working height: 2,150 mm, Al-Vac Powerlift. Mobile column-boom crane with articulated arm. Mounted on a robust steel plate/base, it can be placed on a level surface and used immediately. Alternatively, it can be permanently anchored in the concrete floor if required. The lifting/lowering function is controlled by gently raising or lowering the hand directly above the hook. This makes lifting up to 160 kg feel as easy as lifting it by hand – completely effortless. Reach: 3500 mm. The innermost joint of the boom pivots approximately 270 degrees, and the outermost joint pivots slightly further. This allows access to the entire column. Dkjdpeywti Tofx Ap Dsu Load capacity: 160 kg. Lifting height: 2150 mm + 120 mm base. Overall height: 3560 mm + 120 mm base. Height under the boom: 3330 mm + 120 mm base. Loading and delivery possible for a fee. Disassembly for more economical transport is possible. The crane requires a 230 V plug and is then ready for immediate use. Incredibly easy to operate. The crane is from 2011, but is mechanically almost new. A comparable new unit costs approximately 26,000 euros today. A functional video can be sent via WhatsApp.

Condition: good (used), Cast iron marbles Length: 3970 mm Width: 2060 mm Useful surface (L x W x H): 3910 x 2000 x 350 mm Delivered with 6 levelling feet Weight: 7 T 2 same plates available. Dsdpfx Apoz H Ixvs Deku

Condition: used, Cast iron bed Length: 2300 mm Width: 1900 mm Thickness: 200 mm Dkjdjz H Ixcspfx Ap Dou Height on feet: 980 mm 5 T-slots horizontal and vertical T-slots dimensions: 60 x 35 mm Square dimensions: 365 x 365 mm Crack at a longitudinal T (see photo) Weight: approx 3 T

Condition: used, Cast iron bed 2600 x 2000 x 350 mm Length: 2600 mm Width: 2000 mm Thickness: 350 mm 8 T-slots T-slots dimensions: 55 x 35 mm Dkjdpfx Apjz I A Nrs Dsu Slots spacing: 250 mm Equipped with 12 leveling feet Weight: approx 4,5 T

Condition: good (used), Included in the scope of delivery: Dsdpfx Aeilg E Iep Deku 1x roller track stand, used Overall width with base plates: 275 mm Frame width: approx. 245 mm Minimum height: approx. 660 mm Maximum height: approx. 900 mm Overall depth with base plates: approx. 160 mm Frame profile dimensions: C 80 x 35 x 12 mm Connecting strut dimensions: approx. 180 x 60 x 50 mm Mounting plate dimensions: approx. 140 x 220 x 3.00 mm Bore diameter: approx. 9 mm Bore spacing: approx. 100 mm Frame profile material thickness: approx. 2.50 mm Material color: Sendzimir galvanized

Condition: as good as new (ex-display), functionality: fully functional, This single-sided heavy-duty cantilever rack is ideal for storing heavy long goods such as pipes, profiles, metal bars, steel beams, wooden strips, and sheet material. With a total length of approximately 13.20 meters, a height of approximately 4.00 meters, and cantilever arms of approximately 120 cm, this long goods rack offers a high storage capacity across a total of 4 storage levels (floor level + 3 levels). Each cantilever arm supports up to 500 kg, and the uprights can support up to 2,250 kg. The cantilever arms are bolted on and can be flexibly adjusted in height via a hole grid of 200 mm. The completely hot-dip galvanized material ensures long-lasting protection both indoors and outdoors – new goods available from the Wietmarschen warehouse. PRODUCT DETAILS: - Rack type: single-sided heavy-duty cantilever rack - Total length of the rack row: approx. 13.20 m - Total height: approx. 400 cm - Arm length: approx. 120 cm (made of IPE 80) - Center distance (upright spacing): approx. 131 cm - Levels: floor level + 3 storage levels - Load capacity per arm: max. 500 kg (with uniform distribution) - Load capacity per upright: max. 2,250 kg (with uniform distribution) - Upright profile: IPE 160, approx. 400 cm, including base - Hole grid upright: approx. 20 cm - First hole above base: approx. 107.5 cm (from top of base) - Top hole pair: approx. 50 cm below the upright head (from top of head) - Design: single-sided, cantilever arms bolted on - Surface: completely hot-dip galvanized - Availability: new goods SCOPE OF DELIVERY: - 11 x uprights, approx. 400 cm made of IPE 160, including base, hole grid 20 cm - 33 x cantilever arms, approx. 120 cm made of IPE 80 (without end stops) - Including all connecting elements - Including all necessary screws - 1 x load sign Price: €5,750.00 net €6,842.50 gross You will receive an invoice with VAT shown. DELIVERY, ASSEMBLY & INSPECTION: - Nationwide delivery by our partner shipping company – freight costs depend on the postal code - Professional assembly and disassembly by trained teams is optionally available - Rack inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers is also possible PLANNING & CONSULTATION: Our planning department will be happy to prepare a non-binding offer for you – tailored to your individual requirements. Whether it's a new installation, renovation, or expansion – we will provide you with competent advice on your rack configuration. Haven't found the right one yet? Visit our website – here you will find a quick overview of many offers and variations of the products! ARE YOU INTERESTED OR DO YOU HAVE QUESTIONS? Simply contact us via message or phone call. You will find our telephone number on our company website. You can reach us by telephone from Monday to Friday, 08:00 - 16:00. Dkjdpoz Iw Trjfx Ap Dou Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Condition: used, Small Drilling/Milling Machine ISERT ELECTRONIC Travel X: 350 mm Travel Y: 300 mm Travel Z: 70 mm Dedpoz Nxwcefx Ap Deku Rotation: 8000 / 9500 / 13500 / 20500 / 24000 RPM The machine could be used for drilling printed circuit boards or other use. The machine was controlled through a PC that is no longer present. Possibility to use it in manual Equipped with: 1 Milling Machine KRESS Voltage: 220 V mono Dimensions (L x W x H): 950 x 700 x 700 mm Weight: approx 60 KG

Condition: good (used), Included in the scope of delivery: 1x deep-profile frame, used Material color: Sendzimir galvanized Overall length: approx. 1,250 mm for shelf depth: 1,200 mm clear span: approx. 1,100 mm crossbar support: approx. 50 mm support angle: L: approx. 80 x 80 mm overall width: approx. 860 mm internal width: approx. 855 mm material thickness: approx. 3 mm Side frame: Length: approx. 1,245 - 1,070 mm tapering towards the front Width: approx. 200 mm Height: approx. 195 mm End stop: Width: approx. 200 mm Height: approx. 195 mm Your contacts within our company: Dkodpfor Dr Suex Ap Deu Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This is a used item; scratches, dents, and signs of wear may be present. This item is offered for collection only. Any further transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: good (used), Scope of supply includes: 01x shelf connector, used Manufacturer: Schäfer Type: PR600 Material colour: RAL 5010 blue Total length: approx. 280 mm Distance between shelves: approx. 200 mm L-profile: approx. 40 x 40 x 3 mm Weight: 0.400 kg | each 02x bolts M8 x 20 mm 02x nuts M8 04x washers M8 Your contacts at our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: Dksdpfxowv Rg He Ap Deu This item is offered for collection only. Transport or shipping of this item is subject to additional costs, which can be provided upon request depending on the delivery location and the scope of supply.

Condition: good (used), Marble plate STIEFELMAYER Length: 3000 mm Width: 1500 mm Thickness: 350 mm Dkjdpfjz H Izdox Ap Deu Height on feet: 600 mm Number of feet: 6 feet Weight: approx 4 T It was used as a coordinate measuring marble. 2 same marble plates available.

Condition: reconditioned (used), Year of construction: 1998, functionality: fully functional, Fully automatic package jointing line 500 mm Packaging width - Consisting of: - Finger jointing Central Milling Machine - 2 fixed transport tables - 1 Wheeled processing unit - 2 milling spindles - 2 flakers - Glue - Separating station with tilt-back - Threading section 2 transport chains - Feed with double rollers - Extrusion press 12 ton - crosscut - Packaging width 500 mm - wood in max. 1950 mm - wood in min. 200 mm - Workpiece 50-215 mm - Workpiece thickness of 25 to 100 mm - Performance 2,5- 3 tables / min - Press force max. 12000 kp Dkodpolatv Asfx Ap Dsu - Length of the threading section 3900 mm - Lenght of the press bed 5000 mm - wood with fingerjoint endless - Engine performance milling spindle 2x18,5 kW - Engine chipper 2x 7.5 kW